## Sonoff-Tasmota
Alternative firmware for _ESP8266 based devices_ like [iTead](https://www.itead.cc/) _**Sonoff**_ with **web**, **timers**, 'Over The Air' (**OTA**) firmware updates and **sensors support**, allowing control under **Serial**, **HTTP**, **MQTT** and **KNX**, so as to be used on **Smart Home Systems**. Written for Arduino IDE and PlatformIO.
[](https://github.com/arendst/Sonoff-Tasmota/releases/latest)
[](https://github.com/arendst/Sonoff-Tasmota/releases/latest)
[](https://github.com/arendst/Sonoff-Tasmota/blob/development/LICENSE.txt)
If you like **Sonoff-Tasmota**, give it a star, or fork it and contribute!
[](https://github.com/arendst/Sonoff-Tasmota/stargazers)
[](https://github.com/arendst/Sonoff-Tasmota/network)
### Development:
[](https://travis-ci.org/arendst/Sonoff-Tasmota)
Current version is **5.13.0** - See [sonoff/_releasenotes.ino](https://github.com/arendst/Sonoff-Tasmota/blob/development/sonoff/_releasenotes.ino) for change information.
### Quick install
Download one of the released binaries from https://github.com/arendst/Sonoff-Tasmota/releases and flash it to your hardware as documented in the wiki.
### Important User Compilation Information
If you want to compile Sonoff-Tasmota yourself keep in mind the following:
- Only Flash Mode **DOUT** is supported. Do not use Flash Mode DIO / QIO / QOUT as it might seem to brick your device. See [Wiki](https://github.com/arendst/Sonoff-Tasmota/wiki/Theo's-Tasmota-Tips) for background information.
- Sonoff-Tasmota uses a 1M linker script WITHOUT spiffs for optimal code space. If you compile using ESP/Arduino library 2.3.0 then download the provided new linker script to your Arduino IDE or Platformio base folder. Later version of ESP/Arduino library already contain the correct linker script. See [Wiki > Prerequisite](https://github.com/arendst/Sonoff-Tasmota/wiki/Prerequisite).
- To make compile time changes to Sonoff-Tasmota it can use the ``user_config_override.h`` file. It assures keeping your settings when you download and compile a new version. To use ``user_config.override.h`` you will have to make a copy of the provided ``user_config.override_sample.h`` file and add your setting overrides. To enable the override file you will need to use a compile define as documented in the ``user_config_override_sample.h`` file.
### Version Information
- Sonoff-Tasmota provides all (Sonoff) modules in one file and starts with module Sonoff Basic.
- Once uploaded select module using the configuration webpage or the commands ```Modules``` and ```Module```.
- After reboot select config menu again or use commands ```GPIOs``` and ```GPIO``` to change GPIO with desired sensor.
See [Wiki](https://github.com/arendst/Sonoff-Tasmota/wiki) for more information.
See [Community](https://groups.google.com/d/forum/sonoffusers) for forum and more user experience.
The following devices are supported:
- [iTead Sonoff Basic](https://www.itead.cc/smart-home/sonoff-wifi-wireless-switch-1.html)
- [iTead Sonoff RF](https://www.itead.cc/smart-home/sonoff-rf.html)
- [iTead Sonoff SV](https://www.itead.cc/smart-home/sonoff-sv.html)
- [iTead Sonoff TH10/TH16 with temperature sensor](https://www.itead.cc/smart-home/sonoff-th.html)
- [iTead Sonoff Dual (R2)](https://www.itead.cc/smart-home/sonoff-dual.html)
- [iTead Sonoff Pow with Energy Monitoring](https://www.itead.cc/smart-home/sonoff-pow.html)
- [iTead Sonoff Pow R2 with Energy Monitoring](https://www.itead.cc/sonoff-pow-r2.html)
- [iTead Sonoff 4CH (R2)](https://www.itead.cc/smart-home/sonoff-4ch.html)
- [iTead Sonoff 4CH Pro (R2)](https://www.itead.cc/smart-home/sonoff-4ch-pro.html)
- [iTead S20 Smart Socket](https://www.itead.cc/smart-socket.html)
- [Sonoff S22 Smart Socket](https://github.com/arendst/Sonoff-Tasmota/issues/627)
- [iTead Sonoff S31 Smart Socket with Energy Monitoring](https://www.itead.cc/sonoff-s31.html)
- [iTead Slampher](https://www.itead.cc/slampher.html)
- [iTead Sonoff Touch](https://www.itead.cc/sonoff-touch.html)
- [iTead Sonoff T1](https://www.itead.cc/sonoff-t1.html)
- [iTead Sonoff SC](https://www.itead.cc/sonoff-sc.html)
- [iTead Sonoff Led](https://www.itead.cc/sonoff-led.html)
- [iTead Sonoff BN-SZ01 Ceiling Led](https://www.itead.cc/bn-sz01.html)
- [iTead Sonoff B1](https://www.itead.cc/sonoff-b1.html)
- [iTead Sonoff RF Bridge 433](https://www.itead.cc/sonoff-rf-bridge-433.html)
- [iTead Sonoff Dev](https://www.itead.cc/sonoff-dev.html)
- [iTead 1 Channel Switch 5V / 12V](https://www.itead.cc/smart-home/inching-self-locking-wifi-wireless-switch.html)
- [iTead Motor Clockwise/Anticlockwise](https://www.itead.cc/smart-home/motor-reversing-wifi-wireless-switch.html)
- [Electrodragon IoT Relay Board](http://www.electrodragon.com/product/wifi-iot-relay-board-based-esp8266/)
- AI Light or any my9291 compatible RGBW LED bulb
- H801 PWM LED controller
- [MagicHome PWM LED controller](https://github.com/arendst/Sonoff-Tasmota/wiki/MagicHome-LED-strip-controller)
- AriLux AL-LC01, AL-LC06 and AL-LC11 PWM LED controller
- [Supla device - Espablo-inCan mod. for electrical Installation box](https://forum.supla.org/viewtopic.php?f=33&t=2188)
- [Luani HVIO board](https://luani.de/projekte/esp8266-hvio/)
- Wemos D1 mini, NodeMcu and Ledunia
### Firmware release information
Different firmware images are released based on Features and Sensors selection guided by code and memory usage.
- The Minimal version allows intermediate OTA uploads to support larger versions and does NOT change any persistent parameter.
- The Classic version allows single OTA uploads as did the previous Sonoff-Tasmota versions.
#### Available Features and Sensors
| Feature or Sensor | sonoff | classic | minimal | knx | allsensors |
|--------------------------------|--------|---------|---------|-----|------------|
| MY_LANGUAGE en-GB | x | x | x | x | x |
| MQTT_LIBRARY_TYPE PUBSUBCLIENT | x | x | x | x | x |
| USE_DOMOTICZ | x | x | - | x | x |
| USE_HOME_ASSISTANT | x | x | - | x | x |
| USE_MQTT_TLS | - | - | - | - | - |
| USE_KNX | - | - | - | x | - |
| USE_WEBSERVER | x | x | x | x | x |
| USE_EMULATION | x | x | - | - | x |
| USE_DISCOVERY | x | x | - | x | x |
| WEBSERVER_ADVERTISE | x | x | - | x | x |
| MQTT_HOST_DISCOVERY | x | x | - | x | x |
| USE_TIMERS | x | - | - | x | x |
| USE_TIMERS_WEB | x | - | - | x | x |
| USE_SUNRISE | x | - | - | x | x |
| USE_RULES | x | - | - | x | x |
| | | | | | |
| USE_ADC_VCC | x | x | x | x | x |
| USE_DS18B20 | x | x | - | x | - |
| USE_DS18x20 | - | - | - | - | x |
| USE_DS18x20_LEGACY | - | - | - | - | - |
| USE_I2C | x | x | - | x | x |
| USE_SHT | x | x | - | x | x |
| USE_SHT3X | x | x | - | x | x |
| USE_HTU | x | x | - | x | x |
| USE_BMP | x | x | - | x | x |
| USE_BME680 | - | - | - | - | x |
| USE_SGP30 | x | - | - | x | x |
| USE_BH1750 | x | x | - | x | x |
| USE_VEML6070 | - | - | - | - | x |
| USE_TSL2561 | - | - | - | - | x |
| USE_ADS1115 | - | - | - | - | x |
| USE_ADS1115_I2CDEV | - | - | - | - | - |
| USE_INA219 | - | - | - | - | x |
| USE_MGS | - | - | - | - | x |
| USE_SPI | - | - | - | - | - |
| USE_MHZ19 | x | x | - | x | x |
| USE_SENSEAIR | x | x | - | x | x |
| USE_PMS5003 | x | x | - | x | x |
| USE_NOVA_SDS | x | - | - | x | x |
| USE_PZEM004T | x | x | - | x | x |
| USE_SERIAL_BRIDGE | x | - | - | x | x |
| USE_IR_REMOTE | x | x | - | x | x |
| USE_IR_HVAC | - | - | - | - | x |
| USE_IR_RECEIVE | x | - | - | x | x |
| USE_WS2812 | x | x | - | x | x |
| USE_WS2812_DMA | - | - | - | - | - |
| USE_ARILUX_RF | x | x | - | x | x |
| USE_SR04 | x | - | - | x | x |
#### Typical file size
| ESP/Arduino library version | sonoff | classic | minimal | knx | allsensors |
|--------------------------------|--------|---------|---------|------|------------|
| ESP/Arduino lib v2.3.0 | 526k | 488k | 427k | 535k | 549k |
| ESP/Arduino lib v2.4.0 | 531k | 496k | 435k | 540k | 552k |
| ESP/Arduino lib v2.4.1 | 534k | 499k | 437k | 543k | 555k |
### Contribute
You can contribute to Sonoff-Tasmota by
- providing Pull Requests (Features, Proof of Concepts, Language files or Fixes)
- testing new released features and report issues
- donating to acquire hardware for testing and implementing or out of gratitude
[](https://paypal.me/tasmota)
### Credits
#### Libraries used
Libraries used with Sonoff-Tasmota are:
- [ESP8266 core for Arduino](https://github.com/esp8266/Arduino)
- [Adafruit BME680](https://github.com/adafruit/Adafruit_BME680)
- [Adafruit Sensor](https://github.com/adafruit/Adafruit_Sensor)
- [Adafruit SGP30](https://github.com/adafruit/Adafruit_SGP30)
- [ArduinoJson](https://arduinojson.org/)
- [Esp8266MqttClient](https://github.com/tuanpmt/ESP8266MQTTClient)
- [esp-knx-ip](https://github.com/envy/esp-knx-ip)
- [esp-mqtt-arduino](https://github.com/i-n-g-o/esp-mqtt-arduino)
- [I2Cdevlib](https://github.com/jrowberg/i2cdevlib)
- [IRremoteEsp8266](https://github.com/markszabo/IRremoteESP8266)
- [JobaTsl2561](https://github.com/joba-1/Joba_Tsl2561)
- [MultiChannelGasSensor](http://wiki.seeedstudio.com/Grove-Multichannel_Gas_Sensor/)
- [NeoPixelBus](https://github.com/Makuna/NeoPixelBus)
- [OneWire](https://github.com/PaulStoffregen/OneWire)
- [PubSubClient](https://github.com/knolleary/pubsubclient)
#### People inspiring me
People helping to keep the show on the road:
- David Lang providing initial issue resolution and code optimizations
- Heiko Krupp for his IRSend, HTU21, SI70xx and Wemo/Hue emulation drivers
- Wiktor Schmidt for Travis CI implementation
- Thom Dietrich for PlatformIO optimizations
- Marinus van den Broek for his EspEasy groundwork
- Pete Ba for more user friendly energy monitor calibration
- Lobradov providing compile optimization tips
- Flexiti for his initial timer implementation
- reloxx13 for his [SonWeb](https://github.com/reloxx13/SonWEB) management tool
- Joachim Banzhaf for his TSL2561 library and driver
- Gijs Noorlander for his MHZ19 and SenseAir drivers
- Emontnemery for his HomeAssistant Discovery concept and many code tuning tips
- Aidan Mountford for his HSB support
- Daniel Ztolnai for his Serial Bridge implementation
- Gerhard Mutz for his SGP30 and Sunrise/Sunset driver
- Nuno Ferreira for his HC-SR04 driver
- Adrian Scillato for his (security)fixes and implementing and maintaining KNX
- Raymond Mouthaan for managing Wemos Wiki information
- Norbert Richter, Frogmore42 and Jason2866 for providing many issue answers
- Many more providing Tips, Pocs or PRs
### License
This program is licensed under GPL-3.0