/* zh-TW.h - localization for Chinese (Traditional) - Taiwan for Sonoff-Tasmota Copyright (C) 2018 Theo Arends (translated by dannydu) This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . */ #ifndef _LANGUAGE_ZH_TW_H_ #define _LANGUAGE_ZH_TW_H_ /*************************** ATTENTION *******************************\ * * Due to memory constraints only UTF-8 is supported. * To save code space keep text as short as possible. * Time and Date provided by SDK can not be localized (yet). * Use online command StateText to translate ON, OFF, HOLD and TOGGLE. * Use online command Prefix to translate cmnd, stat and tele. * * Updated until v5.12.0d \*********************************************************************/ //#define LANGUAGE_MODULE_NAME // Enable to display "Module Generic" (ie Spanish), Disable to display "Generic Module" (ie English) #define LANGUAGE_LCID 1028 // HTML (ISO 639-1) Language Code #define D_HTML_LANGUAGE "zh" // "2017-03-07T11:08:02" - ISO8601:2004 #define D_YEAR_MONTH_SEPARATOR "-" #define D_MONTH_DAY_SEPARATOR "-" #define D_DATE_TIME_SEPARATOR "T" #define D_HOUR_MINUTE_SEPARATOR ":" #define D_MINUTE_SECOND_SEPARATOR ":" #define D_DAY3LIST "SunMonTueWedThuFriSat" #define D_MONTH3LIST "JanFebMarAprMayJunJulAugSepOctNovDec" // Non JSON decimal separator #define D_DECIMAL_SEPARATOR "." // Common #define D_ADMIN "Admin" #define D_AIR_QUALITY "空氣品質" #define D_AP "AP" // Access Point #define D_AS "名稱:" #define D_AUTO "自動" #define D_BLINK "閃爍" #define D_BLINKOFF "閃爍關" #define D_BOOT_COUNT "啟動次數" #define D_BRIGHTLIGHT "亮度" #define D_BUTTON "按鈕" #define D_BY "by" // Written by me #define D_BYTES "大小:" #define D_CELSIUS "攝氏" #define D_CO2 "二氧化碳" #define D_CODE "代碼" // Button code #define D_COLDLIGHT "冷" #define D_COMMAND "命令:" #define D_CONNECTED "已連接" #define D_COUNT "數量:" #define D_COUNTER "Counter" #define D_CURRENT "電流" // As in Voltage and Current #define D_DATA "數據:" #define D_DARKLIGHT "Dark" #define D_DEBUG "除錯" #define D_DISABLED "停用" #define D_DISTANCE "Distance" #define D_DNS_SERVER "DNS伺服器" #define D_DONE "完成" #define D_DST_TIME "DST" #define D_ECO2 "eCO2" #define D_EMULATION "設備模擬" #define D_ENABLED "啟用" #define D_ERASE "刪除" #define D_ERROR "錯誤" #define D_FAHRENHEIT "華氏" #define D_FAILED "失敗" #define D_FALLBACK "Fallback" #define D_FALLBACK_TOPIC "Fallback Topic" #define D_FALSE "False" #define D_FILE "文件:" #define D_FREE_MEMORY "可用記憶體" #define D_FREQUENCY "Frequency" #define D_GAS "氣體" #define D_GATEWAY "網關" #define D_GROUP "組:" #define D_HOST "主機" #define D_HOSTNAME "主機名" #define D_HUMIDITY "濕度" #define D_ILLUMINANCE "照度" #define D_IMMEDIATE "immediate" // Button immediate #define D_INDEX "索引:" #define D_INFO "信息" #define D_INFRARED "Infrared" #define D_INITIALIZED "初始化完成" #define D_IP_ADDRESS "IP地址" #define D_LIGHT "燈" #define D_LWT "LWT" #define D_MODULE "模組" #define D_MQTT "MQTT" #define D_MULTI_PRESS "多次按鍵" #define D_NOISE "雜訊" #define D_NONE "無" #define D_OFF "關" #define D_OFFLINE "離線" #define D_OK "好" #define D_ON "開" #define D_ONLINE "在線" #define D_PASSWORD "密碼" #define D_PORT "端口" #define D_POWER_FACTOR "功率因數" #define D_POWERUSAGE "功率" #define D_POWERUSAGE_ACTIVE "Active Power" #define D_POWERUSAGE_APPARENT "Apparent Power" #define D_POWERUSAGE_REACTIVE "Reactive Power" #define D_PRESSURE "氣壓" #define D_PRESSUREATSEALEVEL "海平面氣壓" #define D_PROGRAM_FLASH_SIZE "韌體 Flash 大小" #define D_PROGRAM_SIZE "韌體大小" #define D_PROJECT "項目:" #define D_RECEIVED "已接收" #define D_RESTART "重啟" #define D_RESTARTING "正在重啟" #define D_RESTART_REASON "重啟原因" #define D_RESTORE "恢覆" #define D_RETAINED "已保留" #define D_RULE "Rule" #define D_SAVE "存檔" #define D_SENSOR "感測器" #define D_SSID "名稱" #define D_START "開始" #define D_STD_TIME "STD" #define D_STOP "停止" #define D_SUBNET_MASK "子網遮罩" #define D_SUBSCRIBE_TO "訂閱" #define D_SUCCESSFUL "成功" #define D_SUNRISE "Sunrise" #define D_SUNSET "Sunset" #define D_TEMPERATURE "溫度" #define D_TO "to" #define D_TOGGLE "切換" #define D_TOPIC "主題" #define D_TRANSMIT "發送" #define D_TRUE "True" #define D_TVOC "TVOC" #define D_UPGRADE "升級" #define D_UPLOAD "上傳" #define D_UPTIME "運行時間" #define D_USER "用戶名" #define D_UTC_TIME "UTC" #define D_UV_INDEX "UV Index" #define D_UV_LEVEL "紫外線等級" #define D_VERSION "版本" #define D_VOLTAGE "電壓" #define D_WARMLIGHT "暖" #define D_WEB_SERVER "Web Server" // sonoff.ino #define D_WARNING_MINIMAL_VERSION "警告：精簡產品不支持配置寫入保存" #define D_LEVEL_10 "level 1-0" #define D_LEVEL_01 "level 0-1" #define D_SERIAL_LOGGING_DISABLED "串口日誌已禁用" #define D_SYSLOG_LOGGING_REENABLED "Syslog 日誌已開啟" #define D_SET_BAUDRATE_TO "設置波特率為:" #define D_RECEIVED_TOPIC "接收到的主題:" #define D_DATA_SIZE "數據大小:" #define D_ANALOG_INPUT "Analog" // support.ino #define D_OSWATCH "osWatch" #define D_BLOCKED_LOOP "Blocked Loop" #define D_WPS_FAILED_WITH_STATUS "WPSconfig FAILED with status" #define D_ACTIVE_FOR_3_MINUTES "active for 3 minutes" #define D_FAILED_TO_START "未能啟動" #define D_PATCH_ISSUE_2186 "Patch issue 2186" #define D_CONNECTING_TO_AP "連接到 AP" #define D_IN_MODE "模式:" #define D_CONNECT_FAILED_NO_IP_ADDRESS "連接失敗，因為沒有獲取到IP地址" #define D_CONNECT_FAILED_AP_NOT_REACHED "連接失敗，無法連接AP" #define D_CONNECT_FAILED_WRONG_PASSWORD "連接失敗，AP密碼不正確" #define D_CONNECT_FAILED_AP_TIMEOUT "連接失敗，AP超時" #define D_ATTEMPTING_CONNECTION "嘗試連接..." #define D_CHECKING_CONNECTION "檢查連接..." #define D_QUERY_DONE "查詢完成。 發現MQTT服務" #define D_MQTT_SERVICE_FOUND "發現MQTT服務:" #define D_FOUND_AT "found at" #define D_SYSLOG_HOST_NOT_FOUND "Syslog主機未找到" // settings.ino #define D_SAVED_TO_FLASH_AT "保存到 flash:" #define D_LOADED_FROM_FLASH_AT "從 flash 載入" #define D_USE_DEFAULTS "使用默認設置" #define D_ERASED_SECTOR "擦除刪除" // xdrv_02_webserver.ino #define D_MINIMAL_FIRMWARE_PLEASE_UPGRADE "固件版本過低 - 請升級" #define D_WEBSERVER_ACTIVE_ON "Web服務器:" #define D_WITH_IP_ADDRESS "IP地址:" #define D_WEBSERVER_STOPPED "Web 服務器已停止" #define D_FILE_NOT_FOUND "文件未找到" #define D_REDIRECTED "重定向到認證頁面" #define D_WIFIMANAGER_SET_ACCESSPOINT_AND_STATION "Wifimanager set AccessPoint and keep Station" #define D_WIFIMANAGER_SET_ACCESSPOINT "Wifimanager 設置接入點" #define D_TRYING_TO_CONNECT "嘗試將設備連接到網絡" #define D_RESTART_IN "重啟需要" #define D_SECONDS "秒" #define D_DEVICE_WILL_RESTART "設備將在幾分鐘內重啟" #define D_BUTTON_TOGGLE "狀態切換" #define D_CONFIGURATION "設置" #define D_INFORMATION "信息" #define D_FIRMWARE_UPGRADE "固件升級" #define D_CONSOLE "控制台" #define D_CONFIRM_RESTART "確認重啟" #define D_CONFIGURE_MODULE "模塊設置" #define D_CONFIGURE_MCP230XX "MCP230xx設置" #define D_CONFIGURE_WIFI "WiFi設置" #define D_CONFIGURE_MQTT "MQTT設置" #define D_CONFIGURE_DOMOTICZ "Domoticz設置" #define D_CONFIGURE_LOGGING "日志設置" #define D_CONFIGURE_OTHER "其他設置" #define D_CONFIRM_RESET_CONFIGURATION "確認重置配置" #define D_RESET_CONFIGURATION "重置配置" #define D_BACKUP_CONFIGURATION "備份配置" #define D_RESTORE_CONFIGURATION "還原配置" #define D_MAIN_MENU "主菜單" #define D_MODULE_PARAMETERS "模塊設置" #define D_MODULE_TYPE "模塊類型" #define D_GPIO "GPIO" #define D_SERIAL_IN "串口輸入(RX)" #define D_SERIAL_OUT "串口輸出(TX)" #define D_WIFI_PARAMETERS "Wifi設置" #define D_SCAN_FOR_WIFI_NETWORKS "掃描無線網絡" #define D_SCAN_DONE "掃描完畢" #define D_NO_NETWORKS_FOUND "未找到任何網絡" #define D_REFRESH_TO_SCAN_AGAIN "刷新並重試" #define D_DUPLICATE_ACCESSPOINT "重覆AP" #define D_SKIPPING_LOW_QUALITY "忽略弱信號網絡" #define D_RSSI "RSSI" #define D_WEP "WEP" #define D_WPA_PSK "WPA PSK" #define D_WPA2_PSK "WPA2 PSK" #define D_AP1_SSID "AP1 名稱" #define D_AP1_PASSWORD "AP1 密碼" #define D_AP2_SSID "AP2 名稱" #define D_AP2_PASSWORD "AP2 密碼" #define D_MQTT_PARAMETERS "MQTT設置" #define D_CLIENT "客戶端" #define D_FULL_TOPIC "完整主題" #define D_LOGGING_PARAMETERS "日志設置" #define D_SERIAL_LOG_LEVEL "串口日志級別" #define D_WEB_LOG_LEVEL "Web 日志級別" #define D_SYS_LOG_LEVEL "Syslog 日志級別" #define D_MORE_DEBUG "全部調試" #define D_SYSLOG_HOST "Syslog 主機地址" #define D_SYSLOG_PORT "Syslog 端口" #define D_TELEMETRY_PERIOD "上報周期" #define D_OTHER_PARAMETERS "其他設置" #define D_WEB_ADMIN_PASSWORD "WEB管理密碼" #define D_MQTT_ENABLE "啟用MQTT" #define D_FRIENDLY_NAME "昵稱" #define D_BELKIN_WEMO "貝爾金 WeMo" #define D_HUE_BRIDGE "飛利浦 Hue 網橋" #define D_SINGLE_DEVICE "單設備" #define D_MULTI_DEVICE "多設備" #define D_SAVE_CONFIGURATION "保存設置" #define D_CONFIGURATION_SAVED "設置已保存" #define D_CONFIGURATION_RESET "設置已重置" #define D_PROGRAM_VERSION "固件版本" #define D_BUILD_DATE_AND_TIME "編譯時間" #define D_CORE_AND_SDK_VERSION "內核版本" #define D_FLASH_WRITE_COUNT "刷機次數" #define D_MAC_ADDRESS "MAC地址" #define D_MQTT_HOST "MQTT主機" #define D_MQTT_PORT "MQTT端口" #define D_MQTT_CLIENT "MQTT客戶端" #define D_MQTT_USER "MQTT用戶名" #define D_MQTT_TOPIC "MQTT 主題(Topic)" #define D_MQTT_GROUP_TOPIC "MQTT 主題組(Group Topic)" #define D_MQTT_FULL_TOPIC "MQTT 完整主題(Full Topic)" #define D_MDNS_DISCOVERY "mDNS 發現" #define D_MDNS_ADVERTISE "mDNS 廣播" #define D_ESP_CHIP_ID "ESP芯片ID" #define D_FLASH_CHIP_ID "Flash芯片ID" #define D_FLASH_CHIP_SIZE "Flash大小" #define D_FREE_PROGRAM_SPACE "空閑程序空間" #define D_UPGRADE_BY_WEBSERVER "通過Web升級" #define D_OTA_URL "OTA地址" #define D_START_UPGRADE "開始升級" #define D_UPGRADE_BY_FILE_UPLOAD "通過文件升級" #define D_UPLOAD_STARTED "開始上傳" #define D_UPGRADE_STARTED "開始升級" #define D_UPLOAD_DONE "上傳完成" #define D_UPLOAD_ERR_1 "沒有選擇文件" #define D_UPLOAD_ERR_2 "沒有足夠空間" #define D_UPLOAD_ERR_3 "固件頭不是 0xE9" #define D_UPLOAD_ERR_4 "固件太大" #define D_UPLOAD_ERR_5 "上傳緩沖區不匹配" #define D_UPLOAD_ERR_6 "上傳失敗。 啟用日志記錄 3" #define D_UPLOAD_ERR_7 "上傳取消" #define D_UPLOAD_ERR_8 "錯誤的固件" #define D_UPLOAD_ERR_9 "固件太大" #define D_UPLOAD_ERR_10 "Failed to init RF chip" #define D_UPLOAD_ERR_11 "Failed to erase RF chip" #define D_UPLOAD_ERR_12 "Failed to write to RF chip" #define D_UPLOAD_ERR_13 "Failed to decode RF firmware" #define D_UPLOAD_ERROR_CODE "上傳錯誤代碼" #define D_ENTER_COMMAND "輸入命令" #define D_ENABLE_WEBLOG_FOR_RESPONSE "如果預期響應，則啟用Weblog 2" #define D_NEED_USER_AND_PASSWORD "需要 user=<用戶名>&password=<密碼>" // xdrv_01_mqtt.ino #define D_FINGERPRINT "驗證 TLS 指紋..." #define D_TLS_CONNECT_FAILED_TO "TLS 連接失敗" #define D_RETRY_IN "重試倒計時:" #define D_VERIFIED "驗證成功" #define D_INSECURE "指紋無效導致連接不安全" #define D_CONNECT_FAILED_TO "連接失敗:" // xplg_wemohue.ino #define D_MULTICAST_DISABLED "組播已禁用" #define D_MULTICAST_REJOINED "組播已(重新)加入" #define D_MULTICAST_JOIN_FAILED "組播加入失敗" #define D_FAILED_TO_SEND_RESPONSE "請求發送失敗" #define D_WEMO "WeMo" #define D_WEMO_BASIC_EVENT "WeMo 基礎事件" #define D_WEMO_EVENT_SERVICE "WeMo 事件服務" #define D_WEMO_META_SERVICE "WeMo meta 服務" #define D_WEMO_SETUP "WeMo 設置" #define D_RESPONSE_SENT "發送請求" #define D_HUE "Hue" #define D_HUE_BRIDGE_SETUP "Hue 設置" #define D_HUE_API_NOT_IMPLEMENTED "Hue API 未實現" #define D_HUE_API "Hue API" #define D_HUE_POST_ARGS "Hue POST 參數" #define D_3_RESPONSE_PACKETS_SENT "3 請求包發送" // xdrv_07_domoticz.ino #define D_DOMOTICZ_PARAMETERS "Domoticz 設置" #define D_DOMOTICZ_IDX "Idx" #define D_DOMOTICZ_KEY_IDX "Key idx" #define D_DOMOTICZ_SWITCH_IDX "開關 idx" #define D_DOMOTICZ_SENSOR_IDX "傳感器 idx" #define D_DOMOTICZ_TEMP "溫度" #define D_DOMOTICZ_TEMP_HUM "溫度,濕度" #define D_DOMOTICZ_TEMP_HUM_BARO "溫度,濕度,氣壓" #define D_DOMOTICZ_POWER_ENERGY "功率,電量" #define D_DOMOTICZ_ILLUMINANCE "照度" #define D_DOMOTICZ_COUNT "數值/PM1" #define D_DOMOTICZ_VOLTAGE "電壓/PM2.5" #define D_DOMOTICZ_CURRENT "電流/PM10" #define D_DOMOTICZ_AIRQUALITY "空氣品質" #define D_DOMOTICZ_UPDATE_TIMER "更新計時器" // xdrv_09_timers.ino #define D_CONFIGURE_TIMER "Configure Timer" #define D_TIMER_PARAMETERS "Timer parameters" #define D_TIMER_ENABLE "Enable Timers" #define D_TIMER_ARM "Arm" #define D_TIMER_TIME "Time" #define D_TIMER_DAYS "Days" #define D_TIMER_REPEAT "Repeat" #define D_TIMER_OUTPUT "Output" #define D_TIMER_ACTION "Action" // xdrv_10_knx.ino #define D_CONFIGURE_KNX "Configure KNX" #define D_KNX_PARAMETERS "KNX Parameters" #define D_KNX_GENERAL_CONFIG "General" #define D_KNX_PHYSICAL_ADDRESS "Physical Address" #define D_KNX_PHYSICAL_ADDRESS_NOTE "( Must be unique on the KNX network )" #define D_KNX_ENABLE "Enable KNX" #define D_KNX_GROUP_ADDRESS_TO_WRITE "Data to Send to Group Addresses" #define D_ADD "Add" #define D_DELETE "Delete" #define D_REPLY "Reply" #define D_KNX_GROUP_ADDRESS_TO_READ "Group Addresses to Receive Data from" #define D_LOG_KNX "KNX: " #define D_RECEIVED_FROM "Received from" #define D_KNX_COMMAND_WRITE "Write" #define D_KNX_COMMAND_READ "Read" #define D_KNX_COMMAND_OTHER "Other" #define D_SENT_TO "sent to" #define D_KNX_WARNING "The group address ( 0 / 0 / 0 ) is reserved and can not be used." #define D_KNX_ENHANCEMENT "Communication Enhancement" #define D_KNX_TX_SLOT "KNX TX" #define D_KNX_RX_SLOT "KNX RX" // xdrv_03_energy.ino #define D_ENERGY_TODAY "今日用電量" #define D_ENERGY_YESTERDAY "昨日用電量" #define D_ENERGY_TOTAL "總用電量" // xsns_05_ds18b20.ino #define D_SENSOR_BUSY "傳感器正忙" #define D_SENSOR_CRC_ERROR "傳感器 CRC 校驗錯誤" #define D_SENSORS_FOUND "發現傳感器" // xsns_06_dht.ino #define D_TIMEOUT_WAITING_FOR "等待超時" #define D_START_SIGNAL_LOW "開始低電平" #define D_START_SIGNAL_HIGH "開始高電平" #define D_PULSE "pulse" #define D_CHECKSUM_FAILURE "校驗失敗" // xsns_07_sht1x.ino #define D_SENSOR_DID_NOT_ACK_COMMAND "傳感器沒有確認命令" #define D_SHT1X_FOUND "發現 SHT1X 傳感器" // xsns_18_pms5003.ino #define D_STANDARD_CONCENTRATION "CF-1 PM" // Standard Particle CF-1 Particle Matter #define D_ENVIRONMENTAL_CONCENTRATION "PM" // Environmetal Particle Matter #define D_PARTICALS_BEYOND "顆粒物直徑大於" // sonoff_template.h #define D_SENSOR_NONE "None" #define D_SENSOR_DHT11 "DHT11" #define D_SENSOR_AM2301 "AM2301" #define D_SENSOR_SI7021 "SI7021" #define D_SENSOR_DS18X20 "DS18x20" #define D_SENSOR_I2C_SCL "I2C SCL" #define D_SENSOR_I2C_SDA "I2C SDA" #define D_SENSOR_WS2812 "WS2812" #define D_SENSOR_IRSEND "IRsend" #define D_SENSOR_SWITCH "Switch" // Suffix "1" #define D_SENSOR_BUTTON "Button" // Suffix "1" #define D_SENSOR_RELAY "Relay" // Suffix "1i" #define D_SENSOR_LED "Led" // Suffix "1i" #define D_SENSOR_PWM "PWM" // Suffix "1" #define D_SENSOR_COUNTER "Counter" // Suffix "1" #define D_SENSOR_IRRECV "IRrecv" #define D_SENSOR_MHZ_RX "MHZ Rx" #define D_SENSOR_MHZ_TX "MHZ Tx" #define D_SENSOR_PZEM_RX "PZEM Rx" #define D_SENSOR_PZEM_TX "PZEM Tx" #define D_SENSOR_SAIR_RX "SAir Rx" #define D_SENSOR_SAIR_TX "SAir Tx" #define D_SENSOR_SPI_CS "SPI CS" #define D_SENSOR_SPI_DC "SPI DC" #define D_SENSOR_BACKLIGHT "BkLight" #define D_SENSOR_PMS5003 "PMS5003" #define D_SENSOR_SDS0X1 "SDS0X1" #define D_SENSOR_SBR_RX "SerBr Rx" #define D_SENSOR_SBR_TX "SerBr Tx" #define D_SENSOR_SR04_TRIG "SR04 Tri" #define D_SENSOR_SR04_ECHO "SR04 Ech" #define D_SENSOR_SDM120_TX "SDM120 Tx" #define D_SENSOR_SDM120_RX "SDM120 Rx" #define D_SENSOR_SDM630_TX "SDM630 Tx" #define D_SENSOR_SDM630_RX "SDM630 Rx" #define D_SENSOR_TM1638_CLK "TM16 CLK" #define D_SENSOR_TM1638_DIO "TM16 DIO" #define D_SENSOR_TM1638_STB "TM16 STB" // Units #define D_UNIT_AMPERE "安" #define D_UNIT_CENTIMETER "cm" #define D_UNIT_HERTZ "Hz" #define D_UNIT_HOUR "時" #define D_UNIT_KILOOHM "千歐" #define D_UNIT_KILOWATTHOUR "千瓦時" #define D_UNIT_LUX "勒克斯" #define D_UNIT_MICROGRAM_PER_CUBIC_METER "微克/立方米" #define D_UNIT_MICROMETER "微米" #define D_UNIT_MICROSECOND "微秒" #define D_UNIT_MILLIAMPERE "毫安" #define D_UNIT_MILLISECOND "毫秒" #define D_UNIT_MINUTE "分" #define D_UNIT_PARTS_PER_BILLION "ppb" #define D_UNIT_PARTS_PER_DECILITER "每分升" #define D_UNIT_PARTS_PER_MILLION "ppm" #define D_UNIT_PRESSURE "百帕" #define D_UNIT_SECOND "秒" #define D_UNIT_SECTORS "扇區" #define D_UNIT_VA "VA" #define D_UNIT_VAR "VAr" #define D_UNIT_VOLT "伏" #define D_UNIT_WATT "瓦" #define D_UNIT_WATTHOUR "瓦時" // Log message prefix #define D_LOG_APPLICATION "APP: " // Application #define D_LOG_BRIDGE "BRG: " // Bridge #define D_LOG_CONFIG "CFG: " // Settings #define D_LOG_COMMAND "CMD: " // Command #define D_LOG_DEBUG "DBG: " // Debug #define D_LOG_DHT "DHT: " // DHT sensor #define D_LOG_DOMOTICZ "DOM: " // Domoticz #define D_LOG_DSB "DSB: " // DS18xB20 sensor #define D_LOG_HTTP "HTP: " // HTTP webserver #define D_LOG_I2C "I2C: " // I2C #define D_LOG_IRR "IRR: " // Infra Red Received #define D_LOG_LOG "LOG: " // Logging #define D_LOG_MODULE "MOD: " // Module #define D_LOG_MDNS "DNS: " // mDNS #define D_LOG_MQTT "MQT: " // MQTT #define D_LOG_OTHER "OTH: " // Other #define D_LOG_RESULT "RSL: " // Result #define D_LOG_RFR "RFR: " // RF Received #define D_LOG_SERIAL "SER: " // Serial #define D_LOG_SHT1 "SHT: " // SHT1x sensor #define D_LOG_UPLOAD "UPL: " // Upload #define D_LOG_UPNP "UPP: " // UPnP #define D_LOG_WIFI "WIF: " // Wifi #endif // _LANGUAGE_ZH_TW_H_