# decode-config.py _decode-config.py_ is able to backup and restore Tasmota configuration. In comparison with the Tasmota build-in "Backup/Restore Configuration" function _decode-config.py_ * uses human readable and editable [JSON](http://www.json.org/)-format for backup/restore, * can restore previously backup and changed [JSON](http://www.json.org/)-format files, * is able to create Tasmota compatible command list with related config parameter Comparing backup files created by *decode-config.py* and *.dmp files created by Tasmota "Backup/Restore Configuration": |   | decode-config.py
*.json file | Tasmota
*.dmp file | |-------------------------|:-------------------------------:|:-----------------------------------:| | Encrypted | No | Yes | | Readable | Yes | No | | Simply editable | Yes | No | | Simply batch processing | Yes | No | _decode-config.py_ is compatible with Tasmota version from v5.10.0 up to now. # Content * [Prerequisite](decode-config.md#prerequisite) * [File Types](decode-config.md#file-types) * [.dmp File Format](decode-config.md#-dmp-format) * [.json File Format](decode-config.md#-json-format) * [.bin File Format](decode-config.md#-bin-format) * [File extensions](decode-config.md#file-extensions) * [Usage](decode-config.md#usage) * [Basics](decode-config.md#basics) * [Save backup file](decode-config.md#save-backup-file) * [Restore backup file](decode-config.md#restore-backup-file) * [Output to screen](decode-config.md#output-to-screen) * [JSON output](decode-config.md#json-output) * [Tasmota command output](decode-config.md#tasmota-command-output) * [Filter data](decode-config.md#filter-data) * [Configuration file](decode-config.md#configuration-file) * [More program arguments](decode-config.md#more-program-arguments) * [Examples](decode-config.md#examples) * [Config file](decode-config.md#config-file) * [Using Tasmota binary configuration files](decode-config.md#using-tasmota-binary-configuration-files) * [Use batch processing](decode-config.md#use-batch-processing) * [Notes](decode-config.md#notes) ## Prerequisite * [Python](https://en.wikipedia.org/wiki/Python_(programming_language)) This program is written in [Python](https://en.wikipedia.org/wiki/Python_(programming_language)) so you need to install a working python environment (for details see [Python Setup and Usage](https://docs.python.org/2.7/using/index.html)) * [Tasmota](https://github.com/arendst/Tasmota) [Firmware](https://github.com/arendst/Tasmota/releases) with Web-Server enabled: * To backup or restore configurations from or to a Tasmota device you need a firmare with enabled web-server in admin mode (command [WebServer 2](https://github.com/arendst/Tasmota/wiki/Commands#wifi)). This is the Tasmota default. * If using your own compiled firmware be aware to enable the web-server (`#define USE_WEBSERVER` and `#define WEB_SERVER 2`). ## File Types _decode-config.py_ can handle the following backup file types: ### .dmp Format Configuration data as used by Tasmota "Backup/Restore Configuration" web interface. This format is binary and encrypted. ### .json Format Configuration data in [JSON](http://www.json.org/)-format. This format is decrypted, human readable and editable and can also be used for the `--restore-file` parameter. This file will be created by _decode-config.py_ using the `--backup-file` with `--backup-type json` parameter, this is the default. ### .bin Format Configuration data in binary format. This format is binary decryptet, editable (e.g. using a hex editor) and can also be used for `--restore-file` command. It will be created by _decode-config.py_ using `--backup-file` with `--backup-type bin`. Note: The .bin file contains the same information as the original .dmp file from Tasmota "Backup/Restore Configuration" but it is decrpted and 4 byte longer than an original (it is a prefix header at the beginning). .bin file data starting at address 4 contains the same as the **struct SYSCFG** from Tasmota [settings.h](https://github.com/arendst/Tasmota/blob/master/sonoff/settings.h) in decrypted format. #### File extensions You don't need to append exensions for your file name as _decode-config.py_ uses auto extension as default. The extension will be choose based on file contents and `--backup-type` parameter. If you do not want using auto extensions use the `--no-extension` parameter. ## Usage After download don't forget to set the executable flag under linux with `chmod +x decode-config.py` or call the program using `python decode-config.py...`. ### Basics At least pass a source where you want to read the configuration data from using `-f ` or `-d `: The source can be either * a Tasmota device hostname or IP using the `-d ` parameter * a Tasmota `*.dmp` configuration file using `-f ` parameter Example: decode-config.py -d sonoff-4281 will output a human readable configuration in [JSON](http://www.json.org/)-format: { "altitude": 112, "baudrate": 115200, "blinkcount": 10, "blinktime": 10, ... "ws_width": [ 1, 3, 5 ] } ### Save backup file To save the output as backup file use `--backup-file `, you can use placeholder for Version, Friendlyname and Hostname: decode-config.py -d sonoff-4281 --backup-file Config_@f_@v If you have setup a WebPassword within Tasmota, use decode-config.py -d sonoff-4281 -p --backup-file Config_@f_@v will create a file like `Config_Sonoff_6.4.0.json` (the part `Sonoff` and `6.4.0` will choosen related to your device configuration). Because the default backup file format is JSON, you can read and change it with any raw text editor. ### Restore backup file Reading back a saved (and possible changed) backup file use the `--restore-file ` parameter. This will read the (changed) configuration data from this file and send it back to the source device or filename. To restore the previously save backup file `Config_Sonoff_6.2.1.json` to device `sonoff-4281` use: decode-config.py -d sonoff-4281 --restore-file Config_Sonoff_6.2.1.json with password set by WebPassword: decode-config.py -d sonoff-4281 -p --restore-file Config_Sonoff_6.2.1.json ### Output to screen To force screen output use the `--output` parameter. Output to screen is default enabled when calling the program with a source parameter (-f or -d) but without any backup or restore parameter. #### JSON output The default output format is [JSON](decode-config.md#-json-format). You can force JSON output using the `--output-format json` parameter. Example: decode-config.py -d sonoff-4281 -c my.conf -x Wifi --output-format json { ... "hostname": "%s-%04d", "ip_address": [ "0.0.0.0", "192.168.12.1", "255.255.255.0", "192.168.12.1" ], "ntp_server": [ "ntp.localnet.home", "ntp2.localnet.home", "192.168.12.1" ], "sta_active": 0, "sta_config": 5, "sta_pwd": [ "myWlAnPaszxwo!z", "myWlAnPaszxwo!z2" ], "sta_ssid": [ "wlan.1", "my-wlan" ], "web_password": "myPaszxwo!z", "webserver": 2 ... } Note: JSON output always contains all configuration data like the backup file except you are using `--group` arg. #### Tasmota command output _decode-config.py_ is able to translate the configuration data to (most all) Tasmota commands. To output your configuration as Tasmota commands use `--output-format cmnd` or `--output-format command`. Example: decode-config.py -d sonoff-4281 -c my.conf -g Wifi --output-format cmnd # Wifi: AP 0 Hostname %s-%04d IPAddress1 0.0.0.0 IPAddress2 192.168.12.1 IPAddress3 255.255.255.0 IPAddress4 192.168.12.1 NtpServer1 ntp.localnet.home NtpServer2 ntp2.localnet.home NtpServer3 192.168.12.1 Password1 myWlAnPaszxwo!z Password2 myWlAnPaszxwo!z2 SSId1 wlan.1 SSId2 wlan.1 WebPassword myPaszxwo!z WebServer 2 WifiConfig 5 Note: A few very specific module commands like MPC230xx, KNX and some Display commands are not supported. These are still available by JSON output. ### Filter data The huge number of Tasmota configuration data can be overstrained and confusing, so the most of the configuration data are grouped into categories. With _decode-config.py_ the following categories are available: `Display`, `Domoticz`, `Internal`, `KNX`, `Led`, `Logging`, `MCP230xx`, `MQTT`, `Main`, `Management`, `Pow`, `Sensor`, `Serial`, `SetOption`, `SonoffRF`, `System`, `Timers`, `Wifi` These are similary to the categories on [https://github.com/arendst/Tasmota/wiki/Commands](Tasmota Command Wiki). To filter outputs to a subset of groups use the `-g` or `--group` arg concatenating the grooup you want, e. g. decode-config.py -d sonoff-4281 -c my.conf --output-format cmnd --group Main MQTT Management Wifi ### Configuration file Each argument that start with `--` (eg. `--file`) can also be set in a config file (specified via -c). Config file syntax allows: key=value, flag=true, stuff=[a,b,c] (for details, see syntax at [https://pypi.org/project/ConfigArgParse](https://pypi.org/project/ConfigArgParse/)). If an argument is specified in more than one place, then commandline values override config file values which override defaults. This is usefull if you always use the same argument or a basic set of arguments. The http authentication credentials `--username` and `--password` is predestinated to store it in a file instead using it on your command line as argument: e.g. my.conf: [source] username = admin password = myPaszxwo!z To make a backup file from example above you can now pass the config file instead using the password on command line: decode-config.py -d sonoff-4281 -c my.conf --backup-file Config_@f_@v ### More program arguments For better reading each short written arg (minus sign `-`) has a corresponding long version (two minus signs `--`), eg. `--device` for `-d` or `--file` for `-f` (note: not even all `--` arg has a corresponding `-` one). A short list of possible program args is displayed using `-h` or `--help`. For advanced help use `-H` or `--full-help`: usage: decode-config.py [-f ] [-d ] [-P ] [-u ] [-p ] [-i ] [-o ] [-t json|bin|dmp] [-E] [-e] [-F] [--json-indent ] [--json-compact] [--json-hide-pw] [--json-show-pw] [--cmnd-indent ] [--cmnd-groups] [--cmnd-nogroups] [--cmnd-sort] [--cmnd-unsort] [-c ] [-S] [-T json|cmnd|command] [-g {Control,Devices,Display,Domoticz,Internal,Knx,Light,Management,Mqtt,Power,Rules,Sensor,Serial,Setoption,Shutter,Sonoffrf,System,Timer,Wifi} [{Control,Devices,Display,Domoticz,Internal,Knx,Light,Management,Mqtt,Power,Rules,Sensor,Serial,Setoption,Shutter,Sonoffrf,System,Timer,Wifi} ...]] [--ignore-warnings] [-h] [-H] [-v] [-V] Backup/Restore Tasmota configuration data. Args that start with '--' (eg. -f) can also be set in a config file (specified via -c). Config file syntax allows: key=value, flag=true, stuff=[a,b,c] (for details, see syntax at https://goo.gl/R74nmi). If an arg is specified in more than one place, then commandline values override config file values which override defaults. Source: Read/Write Tasmota configuration from/to -f, --file, --tasmota-file file to retrieve/write Tasmota configuration from/to (default: None)' -d, --device, --host hostname or IP address to retrieve/send Tasmota configuration from/to (default: None) -P, --port TCP/IP port number to use for the host connection (default: 80) -u, --username host HTTP access username (default: admin) -p, --password host HTTP access password (default: None) Backup/Restore: Backup & restore specification -i, --restore-file file to restore configuration from (default: None). Replacements: @v=firmware version from config, @f=device friendly name from config, @h=device hostname from config, @H=device hostname from device (-d arg only) -o, --backup-file file to backup configuration to (default: None). Replacements: @v=firmware version from config, @f=device friendly name from config, @h=device hostname from config, @H=device hostname from device (-d arg only) -t, --backup-type json|bin|dmp backup filetype (default: 'json') -E, --extension append filetype extension for -i and -o filename (default) -e, --no-extension do not append filetype extension, use -i and -o filename as passed -F, --force-restore force restore even configuration is identical JSON output: JSON format specification --json-indent pretty-printed JSON output using indent level (default: 'None'). -1 disables indent. --json-compact compact JSON output by eliminate whitespace --json-hide-pw hide passwords --json-show-pw, --json-unhide-pw unhide passwords (default) Tasmota command output: Tasmota command output format specification --cmnd-indent Tasmota command grouping indent level (default: '2'). 0 disables indent --cmnd-groups group Tasmota commands (default) --cmnd-nogroups leave Tasmota commands ungrouped --cmnd-sort sort Tasmota commands (default) --cmnd-unsort leave Tasmota commands unsorted Common: Optional arguments -c, --config program config file - can be used to set default command args (default: None) -S, --output display output regardsless of backup/restore usage (default do not output on backup or restore usage) -T, --output-format json|cmnd|command display output format (default: 'json') -g, --group {Control,Devices,Display,Domoticz,Internal,Knx,Light,Management,Mqtt,Power,Rules,Sensor,Serial,Setoption,Shutter,Sonoffrf,System,Timer,Wifi} limit data processing to command groups (default no filter) --ignore-warnings do not exit on warnings. Not recommended, used by your own responsibility! Info: Extra information -h, --help show usage help message and exit -H, --full-help show full help message and exit -v, --verbose produce more output about what the program does -V, --version show program's version number and exit Either argument -d or -f must be given. ### Program parameter notes _decode-config.py_ ### Examples The most of the examples are for linux command line. Under Windows call the program using `python decode-config.py ...`. #### Config file Note: The example contains .ini style sections `[...]`. Sections are always treated as comment and serves as clarity only. For further details of config file syntax see [https://pypi.org/project/ConfigArgParse](https://pypi.org/project/ConfigArgParse/). *my.conf* [Source] username = admin password = myPaszxwo!z [JSON] json-indent 2 #### Using Tasmota binary configuration files 1. Restore a Tasmota configuration file `decode-config.py -c my.conf -d sonoff --restore-file Config_Sonoff_6.2.1.dmp` 2. Backup device using Tasmota configuration compatible format a) use file extension to choice the file format `decode-config.py -c my.conf -d sonoff --backup-file Config_@f_@v.dmp` b) use args to choice the file format `decode-config.py -c my.conf -d sonoff --backup-type dmp --backup-file Config_@f_@v` #### Use batch processing for device in sonoff1 sonoff2 sonoff3; do ./decode-config.py -c my.conf -d $device -o Config_@f_@v or under windows for device in (sonoff1 sonoff2 sonoff3) do python decode-config.py -c my.conf -d %device -o Config_@f_@v will produce JSON configuration files for host sonoff1, sonoff2 and sonoff3 using friendly name and Tasmota firmware version for backup filenames. ## Notes Some general notes: * Filename replacement macros **@h** and **@H**: * **@h** The **@h** replacement macro uses the hostname configured with the Tasomta Wifi `Hostname ` command (defaults to `%s-%04d`). It will not use the network hostname of your device because this is not available when working with files only (e.g. `--file ` as source). To prevent having a useless % in your filename, **@h** will not replaced by configuration data hostname if this contains '%' characters. * **@H** If you want to use the network hostname within your filename, use the **@H** replacement macro instead - but be aware this will only replaced if you are using a network device as source (`-d`, `--device`, `--host`); it will not work when using a file as source (`-f`, `--file`)