# RELEASE NOTES ## Migration Information **This version removes support for direct migration from versions before v8.1.0 (Doris)** See [migration path](https://tasmota.github.io/docs/Upgrading#migration-path) for instructions how to migrate to a major version. **Do not upgrade from minimal to minimal version. It will most likely fail at some point and will require flashing via serial.** If you do have to use minimal versions, always OTA to a full version of the same release before applying next minimal version. Pay attention to the following version breaks due to dynamic settings updates: 1. Migrate to **Sonoff-Tasmota 3.9.x** 2. Migrate to **Sonoff-Tasmota 4.x** 3. Migrate to **Sonoff-Tasmota 5.14** (http://ota.tasmota.com/tasmota/release_5.14.0/sonoff.bin) - NOTICE underscore as a dash is not supported in older versions 4. Migrate to **Sonoff-Tasmota 6.7.1** (http://ota.tasmota.com/tasmota/release_6.7.1/sonoff.bin) - NOTICE underscore as a dash is not supported in older versions 5. Migrate to **Tasmota 7.2.0** (http://ota.tasmota.com/tasmota/release-7.2.0/tasmota.bin) --- Major change in parameter storage layout --- 6. Migrate to **Tasmota 8.5.1** (http://ota.tasmota.com/tasmota/release-8.5.1/tasmota.bin) --- Major change in internal GPIO function representation --- 7. Migrate to **Tasmota 9.1** (http://ota.tasmota.com/tasmota/release-9.1.0/tasmota.bin.gz) 8. Upgrade to **latest release** (http://ota.tasmota.com/tasmota/release/tasmota.bin.gz) While fallback or downgrading is common practice it was never supported due to Settings additions or changes in newer releases. Starting with release **v9.1.0 Imogen** the internal GPIO function representation has changed in such a way that fallback is only possible to the latest GPIO configuration before installing **v9.1.0**. ## Supported Core versions This release will be supported from ESP8266/Arduino library Core version **2.7.6** due to reported security and stability issues on previous Core version. This will also support gzipped binaries. This release will be supported from ESP32/Arduino library Core version **3.0.0**. Support of ESP8266 Core versions before 2.7.6 and ESP32 Core versions before 3.0.0 have been removed. ### Known issues with v14.0.0 Due to the change from ESP32 Arduino Core2/IDF4 to Arduino Core3/IDF5 not all functionality has been restored. The following features are known not to work on ESP32: - Wifi Range Extender [#21200](https://github.com/arendst/Tasmota/issues/21200) ## Support of TLS In addition to TLS using fingerprints now also user supplied CA certs, AWS IoT and Azure IoT is supported. Read [full documentation](https://tasmota.github.io/docs/AWS-IoT) ## Initial configuration tools For initial configuration this release supports Webserver based **WifiManager** or **Serial** based command interface. ## Initial installation Easy initial installation of Tasmota can be performed using the [Tasmota WebInstaller](https://tasmota.github.io/install/). ## Provided Binary Downloads ### ESP8266 or ESP8285 based The following binary downloads have been compiled with ESP8266/Arduino library core version **2.7.6**. - **tasmota.bin** = The Tasmota version with most drivers for 1M+ flash. **RECOMMENDED RELEASE BINARY** - **tasmota-4M.bin** = The Tasmota version with most drivers and filesystem for 4M+ flash. - **tasmota-AD.bin** to **tasmota-VN.bin** = The Tasmota version in different languages for 1M+ flash. - **tasmota-lite.bin** = The Lite version without most drivers and sensors for 1M+ flash. - **tasmota-knx.bin** = The Knx version without some features but adds KNX support for 1M+ flash. - **tasmota-sensors.bin** = The Sensors version adds more useful sensors for 1M+ flash. - **tasmota-ir.bin** = The InfraRed Receiver and transmitter version allowing all available protocols provided by library IRremoteESP8266 but without most other features for 1M+ flash. - **tasmota-display.bin** = The Display version without Energy Monitoring but adds display support for 1M+ flash. - **tasmota-zbbridge.bin** = The dedicated Sonoff Zigbee Bridge version for 2M+ flash. - **tasmota-zigbee.bin** = The dedicated cc25xx Zigbee Bridge version for 4M+ flash. Above binaries are also available as gzipped version allowing faster uploads. Latest released binaries can be downloaded from - https://github.com/arendst/Tasmota-firmware/tree/firmware/release-firmware - http://ota.tasmota.com/tasmota/release Historical binaries can be downloaded from - http://ota.tasmota.com/tasmota/release-14.0.0 The latter links can be used for OTA upgrades too like ``OtaUrl http://ota.tasmota.com/tasmota/release/tasmota.bin.gz`` ### ESP32, ESP32-C2, ESP32-C3, ESP32-C6, ESP32-S2 and ESP32-S3 based The following binary downloads have been compiled with ESP32/Arduino library core version **3.0.0**. - **tasmota32.bin** = The Tasmota version with most drivers including additional sensors and KNX for 4M+ flash. **RECOMMENDED RELEASE BINARY** - **tasmota32solo1.bin** = The Tasmota version with most drivers including additional sensors and KNX for single core ESP32 and 4M+ flash. - **tasmota32s2.bin** = The Tasmota version with most drivers including additional sensors and KNX for ESP32-S2 with serial and 4M+ flash. - **tasmota32s2cdc.bin** = The Tasmota version with most drivers including additional sensors and KNX for ESP32-S2 with serial over embedded USB CDC only and 4M+ flash. - **tasmota32s3.bin** = The Tasmota version with most drivers including additional sensors and KNX for ESP32-S3 with USB HWCDC and fallback to serial and 4M+ flash. - **tasmota32c2.bin** = The Tasmota version with most drivers including additional sensors and KNX for ESP32-C2 with serial and 4M+ flash. - **tasmota32c3.bin** = The Tasmota version with most drivers including additional sensors and KNX for ESP32-C2 with USB HWCDC and fallback to serial and 4M+ flash. - **tasmota32c6.bin** = The Tasmota version with most drivers including additional sensors and KNX for ESP32-C6 with USB HWCDC and fallback to serial and 4M+ flash. - **tasmota32-AD.bin** to **tasmota32-VN.bin** = The Tasmota version in different languages for 4M+ flash. - **tasmota32-bluetooth.bin** = The Bluetooth version adds BLE support for 4M+ flash. - **tasmota32-display.bin** = The Display version without Energy Monitoring but adds display support for 4M+ flash. - **tasmota32-ir.bin** = The InfraRed Receiver and transmitter version allowing all available protocols provided by library IRremoteESP8266 but without most other features for 4M+ flash. - **tasmota32-lvgl.bin** = The LVGL version adds Light and Versatile Graphics Library (LVGL) display support for 4M+ flash. - **tasmota32-nspanel.bin** = The Sonoff NSPanel Smart Scene Wall Switch version with HASPmota display support. - **tasmota32-webcam.bin** = The Webcam version adds webcam support for 4M+ flash. - **tasmota32-zbbridgepro.bin** - The Sonoff Zigbee Bridge Pro version with CC2652P firmware load support. Latest released binaries can be downloaded from - https://github.com/arendst/Tasmota-firmware/tree/firmware/release-firmware - https://ota.tasmota.com/tasmota32/release Historical binaries can be downloaded from - https://ota.tasmota.com/tasmota32/release-14.0.0 The latter links can be used for OTA upgrades too like ``OtaUrl https://ota.tasmota.com/tasmota32/release/tasmota32.bin`` ## Additional information [List](MODULES.md) of embedded modules. [Complete list](BUILDS.md) of available feature and sensors. ## Changelog v14.0.0.1 ### Added ### Breaking Changed ### Changed - ESP32 compiler option from `target-align` to `no-target-align` [#21407](https://github.com/arendst/Tasmota/issues/21407) ### Fixed - Domoticz re-subscribe on MQTT reconnect. Regression from v13.4.0.3 [#21281](https://github.com/arendst/Tasmota/issues/21281) ### Removed - Support of old insecure fingerprint algorithm. Deprecated since v8.4.0 [#21417](https://github.com/arendst/Tasmota/issues/21417)