/* i18n.h - internationalization for Tasmota Copyright (C) 2020 Theo Arends This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . */ #ifndef _I18N_H_ #define _I18N_H_ /*********************************************************************************************\ * All text used in Commands, MQTT, JSON messages only in English (#1473) * * (At this location they can/may be overruled by language files using undefs) \*********************************************************************************************/ #define D_JSON_ABORTED "Aborted" #define D_JSON_ACTIVE "Active" #define D_JSON_ADDRESS "Address" #define D_JSON_AIRQUALITY "AirQuality" #define D_JSON_ANALOG_INPUT "Analog" #define D_JSON_AP "AP" // Access Point #define D_JSON_APMAC_ADDRESS "APMac" #define D_JSON_APPENDED "Appended" #define D_JSON_BAUDRATE "Baudrate" #define D_JSON_BLINK "Blink" #define D_JSON_BLOCKED_LOOP "Blocked Loop" #define D_JSON_BOOTVERSION "Boot" #define D_JSON_BOOTCOUNT "BootCount" #define D_JSON_BSSID "BSSId" #define D_JSON_BUILDDATETIME "BuildDateTime" #define D_JSON_CHANNEL "Channel" #define D_JSON_CO2 "CarbonDioxide" #define D_JSON_COMMAND "Command" #define D_JSON_CONFIG_HOLDER "CfgHolder" #define D_JSON_CONNECT_FAILED "Connect failed" #define D_JSON_COREVERSION "Core" #define D_JSON_COUNT "Count" #define D_JSON_COUNTER "Counter" #define D_JSON_CURRENT "Current" // As in Voltage and Current #define D_JSON_DARKNESS "Darkness" #define D_JSON_DATA "Data" #define D_JSON_DEWPOINT "DewPoint" #define D_JSON_DISTANCE "Distance" #define D_JSON_DNSSERVER "DNSServer" #define D_JSON_DONE "Done" #define D_JSON_DOWNTIME "Downtime" #define D_JSON_ECO2 "eCO2" #define D_JSON_EMPTY "Empty" #define D_JSON_ENDDST "EndDST" // End Daylight Savings Time #define D_JSON_ENERGY "Energy" #define D_JSON_ERASE "Erase" #define D_JSON_ERROR "Error" #define D_JSON_EVENT "Event" #define D_JSON_EVERY "Every" #define D_JSON_EXPORT_ACTIVE "ExportActive" #define D_JSON_EXPORT_REACTIVE "ExportReactive" #define D_JSON_FAILED "Failed" #define D_JSON_FALLBACKTOPIC "FallbackTopic" #define D_JSON_FEATURES "Features" #define D_JSON_FLASHCHIPID "FlashChipId" #define D_JSON_FLASHMODE "FlashMode" #define D_JSON_FLASHSIZE "FlashSize" #define D_JSON_FLOWRATE "FlowRate" #define D_JSON_FREEMEMORY "Free" #define D_JSON_FREQUENCY "Frequency" #define D_JSON_FROM "from" #define D_JSON_GAS "Gas" #define D_JSON_GATEWAY "Gateway" #define D_JSON_GROUPS "Groups" #define D_JSON_HEAPSIZE "Heap" #define D_JSON_HIGH "High" #define D_JSON_HOST_NOT_FOUND "Host not found" #define D_JSON_HSBCOLOR "HSBColor" #define D_JSON_HUMIDITY "Humidity" #define D_JSON_I2CSCAN_DEVICES_FOUND_AT "Device(s) found at" #define D_JSON_I2CSCAN_UNKNOWN_ERROR_AT "Unknown error at" #define D_JSON_I2CSCAN_NO_DEVICES_FOUND "No devices found" #define D_JSON_ID "Id" #define D_JSON_ILLUMINANCE "Illuminance" #define D_JSON_IMPORT_ACTIVE "ImportActive" #define D_JSON_IMPORT_REACTIVE "ImportReactive" #define D_JSON_INFRARED "Infrared" #define D_JSON_UNKNOWN "Unknown" #define D_JSON_LIGHT "Light" #define D_JSON_LINK_COUNT "LinkCount" #define D_JSON_LOCAL_TIME "Local" #define D_JSON_LOW "Low" #define D_JSON_MAC "Mac" #define D_JSON_MASK "Mask" #define D_JSON_MEMORY_ERROR "Memory error" #define D_JSON_MINIMAL "minimal" #define D_JSON_MODEL "Model" #define D_JSON_MOISTURE "Moisture" #define D_JSON_MQTT_COUNT "MqttCount" #define D_JSON_NO "No" #define D_JSON_NOISE "Noise" #define D_JSON_NONE "None" #define D_JSON_OR "or" #define D_JSON_PERIOD "Period" #define D_JSON_PHASE_ANGLE "PhaseAngle" #define D_JSON_POWERFACTOR "Factor" #define D_JSON_POWERUSAGE "Power" #define D_JSON_ACTIVE_POWERUSAGE "ActivePower" #define D_JSON_APPARENT_POWERUSAGE "ApparentPower" #define D_JSON_REACTIVE_POWERUSAGE "ReactivePower" #define D_JSON_RANGE "Range" #define D_JSON_PRESSURE "Pressure" #define D_JSON_PRESSUREATSEALEVEL "SeaPressure" #define D_JSON_PRESSURE_UNIT "PressureUnit" #define D_JSON_PROBETEMPERATURE "ProbeTemperature" #define D_JSON_PROGRAMFLASHSIZE "ProgramFlashSize" #define D_JSON_PROGRAMSIZE "ProgramSize" #define D_JSON_REFERENCETEMPERATURE "ReferenceTemperature" #define D_JSON_REMAINING "Remaining" #define D_JSON_RESET "Reset" #define D_JSON_RESISTANCE "Resistance" #define D_JSON_RESOLUTION "Resolution" #define D_JSON_RESTARTING "Restarting" #define D_JSON_RESTARTREASON "RestartReason" #define D_JSON_RSSI "RSSI" #define D_JSON_RUNTIME "Runtime" #define D_JSON_SAVEADDRESS "SaveAddress" #define D_JSON_SAVECOUNT "SaveCount" #define D_JSON_SAVED "Saved" #define D_JSON_SAVESTATE "SaveState" #define D_JSON_SDKVERSION "SDK" #define D_JSON_SELECTED "selected" #define D_JSON_SERIALRECEIVED "SerialReceived" #define D_JSON_SET "Set" #define D_JSON_SIGNAL "Signal" #define D_JSON_SPEED "Speed" #define D_JSON_SPEED_UNIT "SpeedUnit" #define D_JSON_SSID "SSId" #define D_JSON_STARTDST "StartDST" // Start Daylight Savings Time #define D_JSON_STARTED "Started" #define D_JSON_STARTUPUTC "StartupUTC" #define D_JSON_STATUS "Status" #define D_JSON_SUBNETMASK "Subnetmask" #define D_JSON_SUCCESSFUL "Successful" #define D_JSON_SUNRISE "Sunrise" #define D_JSON_SUNSET "Sunset" #define D_JSON_SWITCH "Switch" #define D_JSON_SYNC "Sync" #define D_JSON_TEMPERATURE "Temperature" #define D_JSON_TEMPERATURE_UNIT "TempUnit" #define D_JSON_TIME "Time" #define D_JSON_TODAY "Today" #define D_JSON_TOTAL "Total" #define D_JSON_TOTAL_USAGE "TotalUsage" #define D_JSON_TOTAL_REACTIVE "TotalReactive" #define D_JSON_TOTAL_START_TIME "TotalStartTime" #define D_JSON_TVOC "TVOC" #define D_JSON_TYPE "Type" #define D_JSON_UPTIME "Uptime" #define D_JSON_UTC_TIME "UTC" #define D_JSON_UV_INDEX "UvIndex" #define D_JSON_UV_INDEX_TEXT "UvIndexText" #define D_JSON_UV_LEVEL "UvLevel" #define D_JSON_UV_POWER "UvPower" #define D_JSON_VCC "Vcc" #define D_JSON_VERSION "Version" #define D_JSON_VOLTAGE "Voltage" #define D_JSON_WEIGHT "Weight" #define D_JSON_WIFI "Wifi" #define D_JSON_WRONG "Wrong" #define D_JSON_WRONG_PARAMETERS "Wrong parameters" #define D_JSON_YESTERDAY "Yesterday" #define D_JSON_ZERO_POINT_CALIBRATION "Zero Point Calibration" #define D_JSON_PV1_VOLTAGE "Pv1Voltage" #define D_JSON_PV1_CURRENT "Pv1Current" #define D_JSON_PV1_POWER "Pv1Power" #define D_JSON_PV2_VOLTAGE "Pv2Voltage" #define D_JSON_PV2_CURRENT "Pv2Current" #define D_JSON_PV2_POWER "Pv2Power" #define D_JSON_SOLAR_POWER "SolarPower" #define D_JSON_USAGE "Usage" #define D_JSON_EXPORT "Export" #define D_JSON_TOTAL_ACTIVE "TotalActive" #define D_RSLT_ENERGY "ENERGY" #define D_RSLT_HASS_STATE "HASS_STATE" #define D_RSLT_INFO "INFO" #define D_RSLT_MARGINS "MARGINS" #define D_RSLT_POWER "POWER" #define D_RSLT_RESULT "RESULT" #define D_RSLT_SENSOR "SENSOR" #define D_RSLT_STATE "STATE" #define D_RSLT_UPTIME "UPTIME" #define D_RSLT_WARNING "WARNING" #define D_LOG_SOME_SETTINGS_RESET "Some settings have been reset" // Commands tasmota.ino #define D_CMND_BACKLOG "Backlog" #define D_CMND_DELAY "Delay" #define D_CMND_STATUS "Status" #define D_STATUS1_PARAMETER "PRM" #define D_STATUS2_FIRMWARE "FWR" #define D_STATUS3_LOGGING "LOG" #define D_STATUS4_MEMORY "MEM" #define D_STATUS5_NETWORK "NET" #define D_STATUS6_MQTT "MQT" #define D_STATUS7_TIME "TIM" #define D_STATUS8_POWER "PWR" #define D_STATUS9_MARGIN "PTH" #define D_STATUS10_SENSOR "SNS" #define D_STATUS11_STATUS "STS" #define D_STATUS12_STATUS "STK" #define D_CMND_STATE "State" #define D_CMND_POWER "Power" #define D_CMND_FANSPEED "FanSpeed" #define D_CMND_POWERONSTATE "PowerOnState" #define D_CMND_PULSETIME "PulseTime" #define D_CMND_BLINKTIME "BlinkTime" #define D_CMND_BLINKCOUNT "BlinkCount" #define D_CMND_SENSOR "Sensor" #define D_CMND_DRIVER "Driver" #define D_CMND_SAVEDATA "SaveData" #define D_CMND_SETOPTION "SetOption" #define D_CMND_TEMPERATURE_RESOLUTION "TempRes" #define D_CMND_HUMIDITY_RESOLUTION "HumRes" #define D_CMND_PRESSURE_RESOLUTION "PressRes" #define D_CMND_POWER_RESOLUTION "WattRes" #define D_CMND_VOLTAGE_RESOLUTION "VoltRes" #define D_CMND_FREQUENCY_RESOLUTION "FreqRes" #define D_CMND_CURRENT_RESOLUTION "AmpRes" #define D_CMND_ENERGY_RESOLUTION "EnergyRes" #define D_CMND_WEIGHT_RESOLUTION "WeightRes" #define D_CMND_MODULE "Module" #define D_CMND_MODULES "Modules" #define D_CMND_ADC "ADC" #define D_CMND_ADCS "ADCs" #define D_CMND_GPIO "GPIO" #define D_JSON_NOT_SUPPORTED "Not supported" #define D_CMND_GPIOS "GPIOs" #define D_CMND_PWM "PWM" #define D_CMND_PWMFREQUENCY "PWMFrequency" #define D_CMND_PWMRANGE "PWMRange" #define D_CMND_BUTTONDEBOUNCE "ButtonDebounce" #define D_CMND_SWITCHDEBOUNCE "SwitchDebounce" #define D_CMND_SLEEP "Sleep" #define D_CMND_UPLOAD "Upload" #define D_CMND_UPGRADE "Upgrade" #define D_JSON_ONE_OR_GT "1 or >%s to upgrade" #define D_CMND_OTAURL "OtaUrl" #define D_CMND_SERIALLOG "SerialLog" #define D_CMND_SYSLOG "SysLog" #define D_CMND_LOGHOST "LogHost" #define D_CMND_LOGPORT "LogPort" #define D_CMND_IPADDRESS "IPAddress" #define D_CMND_NTPSERVER "NtpServer" #define D_CMND_AP "Ap" #define D_CMND_SSID "SSId" #define D_CMND_PASSWORD "Password" #define D_CMND_HOSTNAME "Hostname" #define D_CMND_WIFICONFIG "WifiConfig" #define D_WCFG_0_RESTART "Restart" #define D_WCFG_2_WIFIMANAGER "WifiManager" #define D_WCFG_4_RETRY "Retry" #define D_WCFG_5_WAIT "Wait" #define D_WCFG_6_SERIAL "Serial" #define D_WCFG_7_WIFIMANAGER_RESET_ONLY "ManagerRst" #define D_CMND_FRIENDLYNAME "FriendlyName" #define D_CMND_SWITCHMODE "SwitchMode" #define D_CMND_INTERLOCK "Interlock" #define D_CMND_TELEPERIOD "TelePeriod" #define D_CMND_RESTART "Restart" #define D_JSON_ONE_TO_RESTART "1 to restart" #define D_CMND_RESET "Reset" #define D_JSON_RESET_AND_RESTARTING "Reset and Restarting" #define D_JSON_ONE_TO_RESET "1 to reset" #define D_CMND_TIME "Time" #define D_CMND_TIMEZONE "Timezone" #define D_CMND_TIMESTD "TimeStd" #define D_CMND_TIMEDST "TimeDst" #define D_CMND_ALTITUDE "Altitude" #define D_CMND_LEDPOWER "LedPower" #define D_CMND_LEDSTATE "LedState" #define D_CMND_LEDMASK "LedMask" #define D_CMND_WIFIPOWER "WifiPower" #define D_CMND_SPEEDUNIT "SpeedUnit" #define D_CMND_I2CSCAN "I2CScan" #define D_CMND_I2CDRIVER "I2CDriver" #define D_CMND_DEVGROUP_NAME "DevGroupName" #define D_CMND_DEVGROUP_SEND "DevGroupSend" #define D_CMND_DEVGROUP_SHARE "DevGroupShare" #define D_CMND_DEVGROUPSTATUS "DevGroupStatus" #define D_CMND_SERIALSEND "SerialSend" #define D_CMND_SERIALDELIMITER "SerialDelimiter" #define D_CMND_BAUDRATE "Baudrate" #define D_CMND_SERIALCONFIG "SerialConfig" #define D_CMND_TEMPLATE "Template" #define D_JSON_NAME "NAME" #define D_JSON_GPIO "GPIO" #define D_JSON_FLAG "FLAG" #define D_JSON_BASE "BASE" #define D_CMND_TEMPOFFSET "TempOffset" #define D_CMND_HUMOFFSET "HumOffset" #define D_CMND_GLOBAL_TEMP "GlobalTemp" #define D_CMND_GLOBAL_HUM "GlobalHum" // Commands xdrv_01_mqtt.ino #define D_CMND_MQTTLOG "MqttLog" #define D_CMND_MQTTHOST "MqttHost" #define D_CMND_MQTTPORT "MqttPort" #define D_CMND_MQTTRETRY "MqttRetry" #define D_CMND_STATETEXT "StateText" #define D_CMND_MQTTFINGERPRINT "MqttFingerprint" #define D_CMND_MQTTCLIENT "MqttClient" #define D_CMND_MQTTUSER "MqttUser" #define D_CMND_MQTTPASSWORD "MqttPassword" #define D_CMND_TLSKEY "TLSKey" #define D_CMND_FULLTOPIC "FullTopic" #define D_CMND_PREFIX "Prefix" #define D_CMND "cmnd" #define D_STAT "stat" #define D_TELE "tele" #define D_CMND_GROUPTOPIC "GroupTopic" #define D_CMND_TOPIC "Topic" #define D_CMND_BUTTONTOPIC "ButtonTopic" #define D_CMND_SWITCHTOPIC "SwitchTopic" #define D_CMND_BUTTONRETAIN "ButtonRetain" #define D_CMND_SWITCHRETAIN "SwitchRetain" #define D_CMND_POWERRETAIN "PowerRetain" #define D_CMND_SENSORRETAIN "SensorRetain" #define D_CMND_PUBLISH "Publish" // Commands xdrv_02_webserver.ino #define D_CMND_WEBSERVER "Webserver" #define D_JSON_WEBSERVER_MODE "WebServerMode" #define D_JSON_ACTIVE_FOR "Active for" #define D_JSON_ON_DEVICE "on" #define D_JSON_WITH_IP_ADDRESS "with IP address" #define D_CMND_WEBPASSWORD "WebPassword" #define D_CMND_WEBLOG "WebLog" #define D_CMND_WEBREFRESH "WebRefresh" #define D_CMND_WEBSEND "WebSend" #define D_CMND_WEBCOLOR "WebColor" #define D_CMND_WEBBUTTON "WebButton" #define D_CMND_WEBSENSOR "WebSensor" #define D_CMND_EMULATION "Emulation" #define D_CMND_SENDMAIL "Sendmail" #define D_CMND_CORS "CORS" // Commands xdrv_03_energy.ino #define D_CMND_POWERLOW "PowerLow" #define D_CMND_POWERHIGH "PowerHigh" #define D_CMND_POWERDELTA "PowerDelta" #define D_CMND_VOLTAGELOW "VoltageLow" #define D_CMND_VOLTAGEHIGH "VoltageHigh" #define D_CMND_CURRENTLOW "CurrentLow" #define D_CMND_CURRENTHIGH "CurrentHigh" #define D_CMND_ENERGYRESET "EnergyReset" #define D_CMND_POWERSET "PowerSet" #define D_CMND_VOLTAGESET "VoltageSet" #define D_CMND_CURRENTSET "CurrentSet" #define D_CMND_FREQUENCYSET "FrequencySet" #define D_CMND_MAXPOWER "MaxPower" #define D_CMND_MAXPOWERHOLD "MaxPowerHold" #define D_CMND_MAXPOWERWINDOW "MaxPowerWindow" #define D_JSON_MAXPOWERREACHED "MaxPowerReached" #define D_JSON_MAXPOWERREACHEDRETRY "MaxPowerReachedRetry" #define D_CMND_SAFEPOWER "SafePower" #define D_CMND_SAFEPOWERHOLD "SafePowerHold" #define D_CMND_SAFEPOWERWINDOW "SafePowerWindow" #define D_JSON_POWERMONITOR "PowerMonitor" #define D_CMND_MAXENERGY "MaxEnergy" #define D_CMND_MAXENERGYSTART "MaxEnergyStart" #define D_JSON_ENERGYMONITOR "EnergyMonitor" #define D_JSON_MAXENERGYREACHED "MaxEnergyReached" // Commands xdrv_04_light.ino #define D_CMND_CHANNEL "Channel" #define D_CMND_COLOR "Color" #define D_CMND_COLORTEMPERATURE "CT" #define D_CMND_DIMMER "Dimmer" #define D_CMND_DIMMER_RANGE "DimmerRange" #define D_CMND_HSBCOLOR "HSBColor" #define D_CMND_LED "Led" #define D_CMND_LEDTABLE "LedTable" #define D_CMND_FADE "Fade" #define D_CMND_PALETTE "Palette" #define D_CMND_PIXELS "Pixels" #define D_CMND_RGBWWTABLE "RGBWWTable" #define D_CMND_ROTATION "Rotation" #define D_CMND_SCHEME "Scheme" #define D_CMND_SPEED "Speed" #define D_CMND_WAKEUP "Wakeup" #define D_CMND_WAKEUPDURATION "WakeUpDuration" #define D_CMND_WHITE "White" #define D_CMND_WIDTH "Width" // Commands xdrv_05_irremote.ino #define D_CMND_IRSEND "IRSend" #define D_JSON_INVALID_JSON "Invalid JSON" #define D_JSON_INVALID_RAWDATA "Invalid RawData" #define D_JSON_NO_BUFFER_SPACE "No buffer space" #define D_JSON_PROTOCOL_NOT_SUPPORTED "Protocol not supported" #define D_JSON_IR_PROTOCOL "Protocol" #define D_JSON_IR_BITS "Bits" #define D_JSON_IR_DATA "Data" #define D_JSON_IR_DATALSB "DataLSB" #define D_JSON_IR_HASH "Hash" #define D_JSON_IR_RAWDATA "RawData" #define D_JSON_IR_REPEAT "Repeat" #define D_CMND_IRHVAC "IRHVAC" #define D_JSON_IRHVAC_VENDOR "Vendor" #define D_JSON_IRHVAC_PROTOCOL "Protocol" #define D_JSON_IRHVAC_MODEL "Model" #define D_JSON_IRHVAC_POWER "Power" #define D_JSON_IRHVAC_MODE "Mode" #define D_JSON_IRHVAC_FANSPEED "FanSpeed" #define D_JSON_IRHVAC_TEMP "Temp" #define D_JSON_IRHVAC_CELSIUS "Celsius" #define D_JSON_IRHVAC_SWINGV "SwingV" #define D_JSON_IRHVAC_SWINGH "SwingH" #define D_JSON_IRHVAC_LIGHT "Light" #define D_JSON_IRHVAC_BEEP "Beep" #define D_JSON_IRHVAC_ECONO "Econo" #define D_JSON_IRHVAC_FILTER "Filter" #define D_JSON_IRHVAC_TURBO "Turbo" #define D_JSON_IRHVAC_QUIET "Quiet" #define D_JSON_IRHVAC_CLEAN "Clean" #define D_JSON_IRHVAC_SLEEP "Sleep" #define D_JSON_IRHVAC_CLOCK "Clock" #define D_JSON_IRRECEIVED "IrReceived" // Commands xdrv_06_snfbridge.ino #define D_CMND_RFCODE "RfCode" #define D_CMND_RFHIGH "RfHigh" #define D_CMND_RFHOST "RfHost" #define D_CMND_RFKEY "RfKey" #define D_JSON_START_LEARNING "Start learning" #define D_JSON_SET_TO_DEFAULT "Set to default" #define D_JSON_DEFAULT_SENT "Default sent" #define D_JSON_LEARNED_SENT "Learned sent" #define D_JSON_LEARNING_ACTIVE "Learning active" #define D_JSON_LEARN_FAILED "Learn failed" #define D_JSON_LEARNED "Learned" #define D_CMND_RFLOW "RfLow" #define D_CMND_RFSYNC "RfSync" #define D_JSON_RFRECEIVED "RfReceived" #define D_CMND_RFRAW "RfRaw" // Commands xdrv_08_serial_bridge.ino #define D_CMND_SSERIALSEND "SSerialSend" #define D_CMND_SBAUDRATE "SBaudrate" #define D_JSON_SSERIALRECEIVED "SSerialReceived" // Commands xdrv_09_timers.ino #define D_CMND_TIMER "Timer" #define D_JSON_TIMER_ARM "Arm" #define D_JSON_TIMER_MODE "Mode" #define D_JSON_TIMER_TIME "Time" #define D_JSON_TIMER_WINDOW "Window" #define D_JSON_TIMER_DAYS "Days" #define D_JSON_TIMER_REPEAT "Repeat" #define D_JSON_TIMER_OUTPUT "Output" #define D_JSON_TIMER_ACTION "Action" #define D_JSON_TIMER_NO_DEVICE "No GPIO as output configured" #define D_CMND_TIMERS "Timers" #define D_CMND_LATITUDE "Latitude" #define D_CMND_LONGITUDE "Longitude" // Commands xdrv_16_tuyadimmer.ino #define D_CMND_TUYA_MCU "TuyaMCU" #define D_CMND_TUYA_MCU_SEND_STATE "TuyaSend" #define D_JSON_TUYA_MCU_RECEIVED "TuyaReceived" // Commands xdrv_23_zigbee.ino #define D_PRFX_ZB "Zb" #define D_ZIGBEE_NOT_STARTED "Zigbee not started (yet)" #define D_CMND_ZIGBEE_PERMITJOIN "PermitJoin" #define D_CMND_ZIGBEE_STATUS "Status" #define D_CMND_ZIGBEE_RESET "Reset" #define D_JSON_ZIGBEE_CC2530 "CC2530" #define D_CMND_ZIGBEEZNPRECEIVE "ZNPReceive" // only for debug #define D_CMND_ZIGBEEZNPSEND "ZNPSend" #define D_JSON_ZIGBEE_STATE "ZbState" #define D_JSON_ZIGBEEZNPRECEIVED "ZbZNPReceived" #define D_JSON_ZIGBEEZNPSENT "ZbZNPSent" #define D_JSON_ZIGBEEZCL_RECEIVED "ZbZCLReceived" #define D_JSON_ZIGBEEZCL_RAW_RECEIVED "ZbZCLRawReceived" #define D_JSON_ZIGBEE_DEVICE "Device" #define D_JSON_ZIGBEE_NAME "Name" #define D_JSON_ZIGBEE_CONFIRM "ZbConfirm" #define D_CMND_ZIGBEE_NAME "Name" #define D_CMND_ZIGBEE_MODELID "ModelId" #define D_JSON_ZIGBEE_MODELID "ModelId" #define D_CMND_ZIGBEE_PROBE "Probe" #define D_CMND_ZIGBEE_FORGET "Forget" #define D_CMND_ZIGBEE_SAVE "Save" #define D_CMND_ZIGBEE_LINKQUALITY "LinkQuality" #define D_CMND_ZIGBEE_ENDPOINT "Endpoint" #define D_CMND_ZIGBEE_GROUP "Group" #define D_CMND_ZIGBEE_READ "Read" #define D_CMND_ZIGBEE_SEND "Send" #define D_JSON_ZIGBEE_ZCL_SENT "ZbZCLSent" #define D_JSON_ZIGBEE_RECEIVED "ZbReceived" #define D_CMND_ZIGBEE_BIND "Bind" #define D_JSON_ZIGBEE_BIND "ZbBind" #define D_CMND_ZIGBEE_UNBIND "Unbind" #define D_JSON_ZIGBEE_UNBIND "ZbUnbind" #define D_CMND_ZIGBEE_BIND_STATE "BindState" #define D_JSON_ZIGBEE_BIND_STATE "ZbBindState" #define D_CMND_ZIGBEE_PING "Ping" #define D_JSON_ZIGBEE_PING "ZbPing" #define D_JSON_ZIGBEE_IEEE "IEEEAddr" #define D_JSON_ZIGBEE_RESPONSE "ZbResponse" #define D_JSON_ZIGBEE_CMD "Command" #define D_JSON_ZIGBEE_STATUS "Status" #define D_JSON_ZIGBEE_STATUS_MSG "StatusMessage" #define D_CMND_ZIGBEE_LIGHT "Light" #define D_JSON_ZIGBEE_LIGHT "Light" #define D_CMND_ZIGBEE_RESTORE "Restore" #define D_CMND_ZIGBEE_CONFIG "Config" #define D_JSON_ZIGBEE_CONFIG "Config" // Commands xdrv_25_A4988_Stepper.ino #define D_CMND_MOTOR "MOTOR" #define D_JSON_MOTOR_MOVE "doMove" #define D_JSON_MOTOR_ROTATE "doRotate" #define D_JSON_MOTOR_TURN "doTurn" #define D_JSON_MOTOR_SPR "setSPR" #define D_JSON_MOTOR_RPM "setRPM" #define D_JSON_MOTOR_MIS "setMIS" // Commands xdrv_27_Shutter.ino #define D_PRFX_SHUTTER "Shutter" #define D_CMND_SHUTTER_OPEN "Open" #define D_CMND_SHUTTER_CLOSE "Close" #define D_CMND_SHUTTER_TOGGLE "Toggle" #define D_CMND_SHUTTER_UP "Up" #define D_CMND_SHUTTER_DOWN "Down" #define D_CMND_SHUTTER_STOPOPEN "StopOpen" #define D_CMND_SHUTTER_STOPCLOSE "StopClose" #define D_CMND_SHUTTER_STOPTOGGLE "StopToggle" #define D_CMND_SHUTTER_STOPPOSITION "StopPosition" #define D_CMND_SHUTTER_STOP "Stop" #define D_CMND_SHUTTER_POSITION "Position" #define D_CMND_SHUTTER_OPENTIME "OpenDuration" #define D_CMND_SHUTTER_CLOSETIME "CloseDuration" #define D_CMND_SHUTTER_RELAY "Relay" #define D_CMND_SHUTTER_SETHALFWAY "SetHalfway" #define D_CMND_SHUTTER_SETCLOSE "SetClose" #define D_CMND_SHUTTER_INVERT "Invert" #define D_CMND_SHUTTER_CLIBRATION "Calibration" #define D_CMND_SHUTTER_MOTORDELAY "MotorDelay" #define D_CMND_SHUTTER_FREQUENCY "Frequency" #define D_CMND_SHUTTER_BUTTON "Button" #define D_CMND_SHUTTER_LOCK "Lock" #define D_CMND_SHUTTER_ENABLEENDSTOPTIME "EnableEndStopTime" #define D_CMND_SHUTTER_INVERTWEBBUTTONS "InvertWebButtons" // Commands xdrv_32_hotplug.ino #define D_CMND_HOTPLUG "HotPlug" // Commands xdrv_34_pwm_dimmer.ino #ifdef USE_PWM_DIMMER #define D_CMND_BRI_PRESET "BriPreset" #endif // Commands xdrv_38_ping.ino #define D_CMND_PING "Ping" #define D_JSON_PING "Ping" // Commands xdrv_90_heating.ino #define D_CMND_HEATINGMODESET "HeatingModeSet" #define D_CMND_TEMPFROSTPROTECTSET "TempFrostProtectSet" #define D_CMND_CONTROLLERMODESET "ControllerModeSet" #define D_CMND_INPUTSWITCHSET "InputSwitchSet" #define D_CMND_OUTPUTRELAYSET "OutputRelaySet" #define D_CMND_TIMEALLOWRAMPUPSET "TimeAllowRampupSet" #define D_CMND_TEMPMEASUREDSET "TempMeasuredSet" #define D_CMND_TEMPTARGETSET "TempTargetSet" #define D_CMND_TIMEPLANSET "TimePlanSet" #define D_CMND_TEMPTARGETREAD "TempTargetRead" #define D_CMND_TEMPMEASUREDREAD "TempMeasuredRead" #define D_CMND_TEMPMEASUREDGRDREAD "TempMeasuredGrdRead" #define D_CMND_TEMPSENSNUMBERSET "TempSensNumberSet" #define D_CMND_STATEEMERGENCYSET "StateEmergencySet" #define D_CMND_POWERMAXSET "PowerMaxSet" #define D_CMND_TIMEMANUALTOAUTOSET "TimeManualToAutoSet" #define D_CMND_TIMEONLIMITSET "TimeOnLimitSet" #define D_CMND_PROPBANDSET "PropBandSet" #define D_CMND_TIMERESETSET "TimeResetSet" #define D_CMND_TIMEPICYCLESET "TimePiCycleSet" #define D_CMND_TEMPANTIWINDUPRESETSET "TempAntiWindupResetSet" #define D_CMND_TEMPHYSTSET "TempHystSet" #define D_CMND_TIMEMAXACTIONSET "TimeMaxActionSet" #define D_CMND_TIMEMINACTIONSET "TimeMinActionSet" #define D_CMND_TIMEMINTURNOFFACTIONSET "TimeMinTurnoffActionSet" #define D_CMND_TEMPRUPDELTINSET "TempRupDeltInSet" #define D_CMND_TEMPRUPDELTOUTSET "TempRupDeltOutSet" #define D_CMND_TIMERAMPUPMAXSET "TimeRampupMaxSet" #define D_CMND_TIMERAMPUPCYCLESET "TimeRampupCycleSet" #define D_CMND_TEMPRAMPUPPIACCERRSET "TempRampupPiAccErrSet" #define D_CMND_TIMEPIPROPORTREAD "TimePiProportRead" #define D_CMND_TIMEPIINTEGRREAD "TimePiIntegrRead" // Commands xsns_02_analog.ino #define D_CMND_ADCPARAM "AdcParam" /********************************************************************************************/ // Log message prefix #define D_LOG_APPLICATION "APP: " // Application #define D_LOG_BRIDGE "BRG: " // Bridge #define D_LOG_CONFIG "CFG: " // Settings #define D_LOG_COMMAND "CMD: " // Command #define D_LOG_DEBUG "DBG: " // Debug #define D_LOG_DHT "DHT: " // DHT sensor #define D_LOG_DOMOTICZ "DOM: " // Domoticz #define D_LOG_DSB "DSB: " // DS18xB20 sensor #define D_LOG_HTTP "HTP: " // HTTP webserver #define D_LOG_HRE "HRE: " #define D_LOG_I2C "I2C: " // I2C #define D_LOG_IRR "IRR: " // Infra Red Received #define D_LOG_KNX "KNX: " #define D_LOG_LOG "LOG: " // Logging #define D_LOG_MODULE "MOD: " // Module #define D_LOG_MDNS "DNS: " // mDNS #define D_LOG_MQTT "MQT: " // MQTT #define D_LOG_OTHER "OTH: " // Other #define D_LOG_RESULT "RSL: " // Result #define D_LOG_RFR "RFR: " // RF Received #define D_LOG_SERIAL "SER: " // Serial #define D_LOG_SHT1 "SHT: " // SHT1x sensor #define D_LOG_UPLOAD "UPL: " // Upload #define D_LOG_UPNP "UPP: " // UPnP #define D_LOG_WIFI "WIF: " // Wifi #define D_LOG_ZIGBEE "ZIG: " // Zigbee /********************************************************************************************/ #define D_ASTERISK_PWD "****" #ifndef MY_LANGUAGE #include "language/en-GB.h" #else #define QUOTEME(x) QUOTEME_1(x) #define QUOTEME_1(x) #x #define INCLUDE_FILE(x) QUOTEME(language/x.h) #include INCLUDE_FILE(MY_LANGUAGE) #endif #ifndef LANGUAGE_LCID #define LANGUAGE_LCID 2057 // en-GB #endif // Common const char S_JSON_COMMAND_NVALUE_SPACE_UNIT[] PROGMEM = "{\"%s\":\"%d %s\"}"; const char S_JSON_COMMAND_LVALUE_SPACE_UNIT[] PROGMEM = "{\"%s\":\"%lu %s\"}"; const char S_JSON_COMMAND_SVALUE_SPACE_UNIT[] PROGMEM = "{\"%s\":\"%s %s\"}"; const char S_JSON_COMMAND_NVALUE_SVALUE[] PROGMEM = "{\"%s\":{\"%d\":\"%s\"}}"; const char S_JSON_COMMAND_NVALUE_ACTIVE_NVALUE[] PROGMEM = "{\"%s\":{\"%d\":{\"" D_JSON_ACTIVE "\":\"%d\"}}}"; const char S_JSON_COMMAND_NVALUE[] PROGMEM = "{\"%s\":%d}"; const char S_JSON_COMMAND_LVALUE[] PROGMEM = "{\"%s\":%lu}"; const char S_JSON_COMMAND_SVALUE[] PROGMEM = "{\"%s\":\"%s\"}"; const char S_JSON_COMMAND_ASTERISK[] PROGMEM = "{\"%s\":\"" D_ASTERISK_PWD "\"}"; const char S_JSON_COMMAND_XVALUE[] PROGMEM = "{\"%s\":%s}"; // %s must provide quotes on non-number const char S_JSON_COMMAND_INDEX_NVALUE[] PROGMEM = "{\"%s%d\":%d}"; const char S_JSON_COMMAND_INDEX_LVALUE[] PROGMEM = "{\"%s%d\":%lu}"; const char S_JSON_COMMAND_INDEX_SVALUE[] PROGMEM = "{\"%s%d\":\"%s\"}"; const char S_JSON_COMMAND_INDEX_ASTERISK[] PROGMEM = "{\"%s%d\":\"" D_ASTERISK_PWD "\"}"; const char S_JSON_COMMAND_INDEX_SVALUE_SVALUE[] PROGMEM = "{\"%s%d\":\"%s%s\"}"; const char S_JSON_SENSOR_INDEX_NVALUE[] PROGMEM = "{\"" D_CMND_SENSOR "%d\":%d}"; const char S_JSON_SENSOR_INDEX_SVALUE[] PROGMEM = "{\"" D_CMND_SENSOR "%d\":\"%s\"}"; const char S_JSON_DRIVER_INDEX_NVALUE[] PROGMEM = "{\"" D_CMND_DRIVER "%d\":%d}"; const char S_JSON_DRIVER_INDEX_SVALUE[] PROGMEM = "{\"" D_CMND_DRIVER "%d\":\"%s\"}"; const char JSON_SNS_TEMP[] PROGMEM = ",\"%s\":{\"" D_JSON_TEMPERATURE "\":%s}"; const char JSON_SNS_ILLUMINANCE[] PROGMEM = ",\"%s\":{\"" D_JSON_ILLUMINANCE "\":%d}"; const char JSON_SNS_MOISTURE[] PROGMEM = ",\"%s\":{\"" D_JSON_MOISTURE "\":%d}"; const char JSON_SNS_RANGE[] PROGMEM = ",\"%s\":{\"" D_JSON_RANGE "\":%d}"; const char JSON_SNS_GNGPM[] PROGMEM = ",\"%s\":{\"" D_JSON_TOTAL_USAGE "\":%s,\"" D_JSON_FLOWRATE "\":%s}"; const char S_LOG_I2C_FOUND_AT[] PROGMEM = D_LOG_I2C "%s " D_FOUND_AT " 0x%x"; const char S_LOG_HTTP[] PROGMEM = D_LOG_HTTP; const char S_LOG_WIFI[] PROGMEM = D_LOG_WIFI; const char S_LOG_MQTT[] PROGMEM = D_LOG_MQTT; const char S_RSLT_POWER[] PROGMEM = D_RSLT_POWER; const char S_RSLT_RESULT[] PROGMEM = D_RSLT_RESULT; const char S_RSLT_WARNING[] PROGMEM = D_RSLT_WARNING; const char S_LWT[] PROGMEM = D_LWT; const char S_OFFLINE[] PROGMEM = D_OFFLINE; // support.ino static const char kMonthNames[] = D_MONTH3LIST; const char kSpeedUnit[] PROGMEM = "|m/s|km/h|kn|mph|ft/s|yd/s"; const float kSpeedConversionFactor[] = {1, // none 1, // m/s 3.6, // km/h 1.943844492, // kn 2.236936292, // mph 3.280839895, // ft/s 1.093613298 // yd/s }; // xdrv_02_webserver.ino #ifdef USE_WEBSERVER // {s} = , {m} = , {e} = const char HTTP_SNS_TEMP[] PROGMEM = "{s}%s " D_TEMPERATURE "{m}%s°%c{e}"; const char HTTP_SNS_HUM[] PROGMEM = "{s}%s " D_HUMIDITY "{m}%s%%{e}"; const char HTTP_SNS_DEW[] PROGMEM = "{s}%s " D_DEWPOINT "{m}%s°%c{e}"; const char HTTP_SNS_PRESSURE[] PROGMEM = "{s}%s " D_PRESSURE "{m}%s %s{e}"; const char HTTP_SNS_SEAPRESSURE[] PROGMEM = "{s}%s " D_PRESSUREATSEALEVEL "{m}%s %s{e}"; const char HTTP_SNS_ANALOG[] PROGMEM = "{s}%s " D_ANALOG_INPUT "%d{m}%d{e}"; const char HTTP_SNS_ILLUMINANCE[] PROGMEM = "{s}%s " D_ILLUMINANCE "{m}%d " D_UNIT_LUX "{e}"; const char HTTP_SNS_CO2[] PROGMEM = "{s}%s " D_CO2 "{m}%d " D_UNIT_PARTS_PER_MILLION "{e}"; const char HTTP_SNS_CO2EAVG[] PROGMEM = "{s}%s " D_ECO2 "{m}%d " D_UNIT_PARTS_PER_MILLION "{e}"; const char HTTP_SNS_GALLONS[] PROGMEM = "{s}%s " D_TOTAL_USAGE "{m}%s " D_UNIT_GALLONS " {e}"; const char HTTP_SNS_GPM[] PROGMEM = "{s}%s " D_FLOW_RATE "{m}%s " D_UNIT_GALLONS_PER_MIN" {e}"; const char HTTP_SNS_MOISTURE[] PROGMEM = "{s}%s " D_MOISTURE "{m}%d %%{e}"; const char HTTP_SNS_RANGE[] PROGMEM = "{s}%s " D_RANGE "{m}%d{e}"; const char HTTP_SNS_VOLTAGE[] PROGMEM = "{s}" D_VOLTAGE "{m}%s " D_UNIT_VOLT "{e}"; const char HTTP_SNS_CURRENT[] PROGMEM = "{s}" D_CURRENT "{m}%s " D_UNIT_AMPERE "{e}"; const char HTTP_SNS_POWER[] PROGMEM = "{s}" D_POWERUSAGE "{m}%s " D_UNIT_WATT "{e}"; const char HTTP_SNS_ENERGY_TOTAL[] PROGMEM = "{s}" D_ENERGY_TOTAL "{m}%s " D_UNIT_KILOWATTHOUR "{e}"; const char S_MAIN_MENU[] PROGMEM = D_MAIN_MENU; const char S_CONFIGURATION[] PROGMEM = D_CONFIGURATION; const char S_CONFIGURE_TEMPLATE[] PROGMEM = D_CONFIGURE_TEMPLATE; const char S_CONFIGURE_MODULE[] PROGMEM = D_CONFIGURE_MODULE; const char S_CONFIGURE_WIFI[] PROGMEM = D_CONFIGURE_WIFI; const char S_NO_NETWORKS_FOUND[] PROGMEM = D_NO_NETWORKS_FOUND; const char S_CONFIGURE_LOGGING[] PROGMEM = D_CONFIGURE_LOGGING; const char S_CONFIGURE_OTHER[] PROGMEM = D_CONFIGURE_OTHER; const char S_SAVE_CONFIGURATION[] PROGMEM = D_SAVE_CONFIGURATION; const char S_RESET_CONFIGURATION[] PROGMEM = D_RESET_CONFIGURATION; const char S_RESTORE_CONFIGURATION[] PROGMEM = D_RESTORE_CONFIGURATION; const char S_FIRMWARE_UPGRADE[] PROGMEM = D_FIRMWARE_UPGRADE; const char S_CONSOLE[] PROGMEM = D_CONSOLE; const char S_INFORMATION[] PROGMEM = D_INFORMATION; const char S_RESTART[] PROGMEM = D_RESTART; #endif // USE_WEBSERVER const uint32_t MARKER_START = 0x5AA55AA5; const uint32_t MARKER_END = 0xA55AA55A; const uint32_t VERSION_MARKER[] PROGMEM = { MARKER_START, VERSION, MARKER_END }; #endif // _I18N_H_