Logo # Basic API information Tasmota can easily be extended by developers using provided function pointers as callback Ids. This document lists the available callback function Ids. Read [Sensor API](https://tasmota.github.io/docs/Sensor-API) for more information. Callback availability can be checked by searching for either XdrvCall, XsnsCall, XdspCall, XnrgCall and XlgtCall. ## Driver, Sensor, Energy and Light Callback Ids The following table lists Callback Ids and their availability for a Driver, Sensor or Energy service. Callback Id | Bool | xdrv | xsns | xnrg | xlgt | Description ----------------------------|------|------|------|------|------|---------------------------------- FUNC_SETTINGS_OVERRIDE | | x | | | | Override start-up settings FUNC_PIN_STATE | x | 1 | 2 | | | At GPIO configuration FUNC_I2C_INIT | | x | | | | Immediately after I2C init FUNC_MODULE_INIT | x | 3 | 1 | | 2 | Init module specific parameters FUNC_PRE_INIT | | 1 | 3 | 2 | | Once GPIO have been established FUNC_INIT | | 1 | 3 | 2 | | At end of initialisation FUNC_LOOP | | 1 | 2 | | | In main loop FUNC_SLEEP_LOOP | | 1 | 2 | | | In main loop during sleep FUNC_EVERY_50_MSECOND | | 1 | 2 | | | In main loop FUNC_EVERY_100_MSECOND | | 1 | 2 | | | In main loop FUNC_EVERY_200_MSECOND | | | | x | | In main loop FUNC_EVERY_250_MSECOND | | 1 | 3 | 2 | | In main loop FUNC_EVERY_SECOND | | 1 | 2 | | | In main loop FUNC_SAVE_SETTINGS | | 2 | 1 | | | Just before saving settings FUNC_SAVE_AT_MIDNIGHT | | | x | | | At midnight FUNC_SAVE_BEFORE_RESTART | | 2 | 1 | | | Just before a planned restart FUNC_AFTER_TELEPERIOD | | 2 | 1 | | | At end of teleperiod FUNC_JSON_APPEND | | 2 | 1 | 3 | | Extend teleperiod JSON text FUNC_WEB_SENSOR | | 2 | 1 | 3 | | Add sensor data to web GUI FUNC_WEB_COL_SENSOR | | 2 | 1 | 3 | | Add sensor data to web GUI using columns FUNC_COMMAND | x | 1 | 2 | 3 | 4 | When a command is not recognized FUNC_COMMAND_DRIVER | x | x | | | | When command Driver\ is executed FUNC_COMMAND_SENSOR | x | | x | | | When command Sensor\ is executed FUNC_MQTT_SUBSCRIBE | | x | | | | At end of MQTT subscriptions FUNC_MQTT_INIT | | x | | | | Once at end of MQTT connection FUNC_MQTT_DATA | x | x | | | | Before decoding command FUNC_SET_POWER | | 1 | 2 | | | Before setting relays FUNC_SET_DEVICE_POWER | x | x | | | | Set relay FUNC_SHOW_SENSOR | | x | | | | When FUNC_JSON_APPEND completes FUNC_ANY_KEY | | x | | | | FUNC_LED_LINK | | x | | | | SetLedLink (On ESP32 only). XdrvMailbox.index holds state FUNC_ENERGY_EVERY_SECOND | | | | x | | FUNC_ENERGY_RESET | | | | x | | FUNC_RULES_PROCESS | x | x | | | | Process specific rule FUNC_TELEPERIOD_RULES_PROCESS | x | x | | | | Process specific rule as teleperiod FUNC_SERIAL | x | 1 | | 2 | 3 | Process serial data FUNC_FREE_MEM | | x | | | | Show free memory for debugging FUNC_BUTTON_PRESSED | x | x | | | | When a button is pressed FUNC_BUTTON_MULTI_PRESSED | x | x | | | | When a button is pressed multiple times FUNC_WEB_ADD_BUTTON | | 1 | 2 | | | Add a Configuration Button to GUI FUNC_WEB_ADD_MAIN_BUTTON | | 1 | 2 | | | Add a main button to GUI FUNC_WEB_ADD_CONSOLE_BUTTON | | 1 | 2 | | | Add a Consoles Button to GUI FUNC_WEB_ADD_MANAGEMENT_BUTTON | | x | | | | Add a Management Button to GUI FUNC_WEB_ADD_HANDLER | | 1 | 2 | | | Add a webserver handler FUNC_WEB_GET_ARG | | 2 | 1 | | 3 | Get webserver setting arguments FUNC_SET_CHANNELS | | 2 | | | 1 | FUNC_SET_SCHEME | | | | | x | FUNC_HOTPLUG_SCAN | | | x | | | FUNC_TIME_SYNCED | | x | | | | Report time is synced FUNC_DEVICE_GROUP_ITEM | | x | | | | FUNC_NETWORK_UP | | 1 | 2 | 3 | 4 | Wifi or ETH network just went up (received even if webserver is not enabled) FUNC_NETWORK_DOWN | | 1 | 2 | 3 | 4 | Wifi or ETH network just went down (received even if webserver is not enabled) The numbers represent the sequence of execution ## Display Call back Ids The following table lists all Callback Ids for a Display service. Callback Id | Bool | Description ------------------------------|------|--------------------- FUNC_DISPLAY_INIT_DRIVER | | FUNC_DISPLAY_INIT | | FUNC_DISPLAY_EVERY_50_MSECOND | | FUNC_DISPLAY_EVERY_SECOND | | FUNC_DISPLAY_MODEL | x | FUNC_DISPLAY_MODE | | FUNC_DISPLAY_POWER | | FUNC_DISPLAY_CLEAR | | FUNC_DISPLAY_DRAW_FRAME | | FUNC_DISPLAY_DRAW_HLINE | | FUNC_DISPLAY_DRAW_VLINE | | FUNC_DISPLAY_DRAW_LINE | | FUNC_DISPLAY_DRAW_CIRCLE | | FUNC_DISPLAY_FILL_CIRCLE | | FUNC_DISPLAY_DRAW_RECTANGLE | | FUNC_DISPLAY_FILL_RECTANGLE | | FUNC_DISPLAY_TEXT_SIZE | | FUNC_DISPLAY_FONT_SIZE | | FUNC_DISPLAY_ROTATION | | FUNC_DISPLAY_DRAW_STRING | | FUNC_DISPLAY_ONOFF | | ## Init sequence The following list shows a typical callback init sequence ``` CFG: Loaded from flash at FB, Count 1581 xdrv - FUNC_SETTINGS_OVERRIDE xdrv - FUNC_PIN_STATE xsns - FUNC_PIN_STATE xsns - FUNC_MODULE_INIT xdrv - FUNC_MODULE_INIT xlgt - FUNC_MODULE_INIT xdrv - FUNC_PRE_INIT xnrg - FUNC_PRE_INIT xsns - FUNC_PRE_INIT SRC: Restart xdrv - FUNC_SET_POWER xsns - FUNC_SET_POWER xlgt - FUNC_SET_CHANNELS xdrv - FUNC_SET_DEVICE_POWER Project tasmota Wemos 2 Version 7.0.0.3(tasmota)-STAGE xdrv - FUNC_INIT xsns - FUNC_INIT I2C: ADS1115 found at 0x48 xdrv - FUNC_LOOP xsns - FUNC_LOOP xdrv - FUNC_EVERY_50_MSECOND xlgt - FUNC_SET_CHANNELS xsns - FUNC_EVERY_50_MSECOND xdrv - FUNC_EVERY_100_MSECOND xsns - FUNC_EVERY_100_MSECOND xdrv - FUNC_EVERY_250_MSECOND xsns - FUNC_EVERY_250_MSECOND xdrv - FUNC_EVERY_SECOND xsns - FUNC_EVERY_SECOND WIF: Attempting connection... WIF: Network (re)scan started... WIF: Attempting connection... WIF: Attempting connection... WIF: Attempting connection... WIF: Network 0, AP1, SSId indebuurt1, Channel 1, BSSId 24:D3:F2:97:C0:A1, RSSI -86, Encryption 1 WIF: Network 1, AP2, SSId indebuurt2, Channel 5, BSSId A0:AB:1B:7D:42:AC, RSSI -42, Encryption 1 WIF: Network 2, AP-, SSId indebuurt3, Channel 12, BSSId 60:E3:27:58:77:E6, RSSI -84, Encryption 1 WIF: Connecting to AP2 indebuurt2 in mode 11N as wemos2... WIF: Attempting connection... WIF: Attempting connection... WIF: Attempting connection... WIF: Connected xdrv - FUNC_WEB_ADD_HANDLER xsns - FUNC_WEB_ADD_HANDLER HTP: Web server active on wemos2 with IP address 192.168.2.191 NTP: Drift 0, (UTC) Wed Nov 06 13:57:08 2019, (DST) Sun Mar 31 02:00:00 2019, (STD) Sun Oct 27 03:00:00 2019 APP: Boot Count 500 MQT: Attempting connection... MQT: Connected MQT: tele/wemos2/LWT = Online (retained) MQT: cmnd/wemos2/POWER = MQT: Subscribe to cmnd/wemos2/# MQT: Subscribe to cmnd/sonoffs/# MQT: Subscribe to cmnd/DVES_15568C_fb/# xdrv - FUNC_MQTT_SUBSCRIBE MQT: tele/wemos2/INFO1 = {"Module":"Generic","Version":"7.0.0.3(tasmota)","FallbackTopic":"cmnd/DVES_15568C_fb/","GroupTopic":"cmnd/sonoffs/"} MQT: tele/wemos2/INFO2 = {"WebServerMode":"Admin","Hostname":"wemos2","IPAddress":"192.168.2.191"} MQT: tele/wemos2/INFO3 = {"RestartReason":"Software/System restart"} MQT: stat/wemos2/RESULT = {"POWER1":"OFF"} MQT: stat/wemos2/POWER1 = OFF MQT: stat/wemos2/RESULT = {"POWER2":"ON"} MQT: stat/wemos2/POWER2 = ON xdrv - FUNC_MQTT_INIT CFG: Saved to flash at FA, Count 1582, Bytes 4096 ```