/* xdrv_02_mqtt.ino - mqtt support for Tasmota Copyright (C) 2021 Theo Arends This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . */ #define XDRV_02 2 #ifndef MQTT_WIFI_CLIENT_TIMEOUT #define MQTT_WIFI_CLIENT_TIMEOUT 200 // Wifi TCP connection timeout (default is 5000 mSec) #endif #define USE_MQTT_NEW_PUBSUBCLIENT // #define DEBUG_DUMP_TLS // allow dumping of TLS Flash keys #ifdef USE_MQTT_TLS #include "WiFiClientSecureLightBearSSL.h" BearSSL::WiFiClientSecure_light *tlsClient; #endif WiFiClient EspClient; // Wifi Client - non-TLS #ifdef USE_MQTT_AZURE_IOT #undef MQTT_PORT #define MQTT_PORT 8883 #if defined(USE_MQTT_AZURE_DPS_SCOPEID) && defined(USE_MQTT_AZURE_DPS_PRESHAREDKEY) #include // dedicated tlsHttpsClient for DPS as the 'tlsClient' above causes error '-1' in httpsClient after it is associated with PubSub. It cost ~5K of heap BearSSL::WiFiClientSecure_light *tlsHttpsClient = new BearSSL::WiFiClientSecure_light(1024,1024); HTTPClient httpsClient; int httpsClientReturn; #endif // USE_MQTT_AZURE_DPS_SCOPEID #include #include #include #endif // USE_MQTT_AZURE_IOT const char kMqttCommands[] PROGMEM = "|" // No prefix // SetOption synonyms D_SO_MQTTJSONONLY "|" #ifdef USE_MQTT_TLS D_SO_MQTTTLS "|" #endif D_SO_MQTTNORETAIN "|" D_SO_MQTTDETACHRELAY "|" // regular commands #if defined(USE_MQTT_TLS) && !defined(USE_MQTT_TLS_CA_CERT) D_CMND_MQTTFINGERPRINT "|" #endif D_CMND_MQTTUSER "|" D_CMND_MQTTPASSWORD "|" D_CMND_MQTTKEEPALIVE "|" D_CMND_MQTTTIMEOUT "|" #if defined(USE_MQTT_TLS) && defined(USE_MQTT_AWS_IOT) D_CMND_TLSKEY "|" #endif #ifdef USE_MQTT_FILE D_CMND_FILEUPLOAD "|" D_CMND_FILEDOWNLOAD "|" #endif // USE_MQTT_FILE D_CMND_MQTTHOST "|" D_CMND_MQTTPORT "|" D_CMND_MQTTRETRY "|" D_CMND_STATETEXT "|" D_CMND_MQTTCLIENT "|" D_CMND_FULLTOPIC "|" D_CMND_PREFIX "|" D_CMND_GROUPTOPIC "|" D_CMND_TOPIC "|" D_CMND_PUBLISH "|" D_CMND_MQTTLOG "|" D_CMND_BUTTONTOPIC "|" D_CMND_SWITCHTOPIC "|" D_CMND_BUTTONRETAIN "|" D_CMND_SWITCHRETAIN "|" D_CMND_POWERRETAIN "|" D_CMND_SENSORRETAIN "|" D_CMND_INFORETAIN "|" D_CMND_STATERETAIN ; SO_SYNONYMS(kMqttSynonyms, 90, #ifdef USE_MQTT_TLS 103, #endif 104, 114 ); // const uint8_t kMqttSynonyms[] PROGMEM = { // 4, // number of synonyms // 90, 103, 104, 114, // }; void (* const MqttCommand[])(void) PROGMEM = { #if defined(USE_MQTT_TLS) && !defined(USE_MQTT_TLS_CA_CERT) &CmndMqttFingerprint, #endif &CmndMqttUser, &CmndMqttPassword, &CmndMqttKeepAlive, &CmndMqttTimeout, #if defined(USE_MQTT_TLS) && defined(USE_MQTT_AWS_IOT) &CmndTlsKey, #endif #ifdef USE_MQTT_FILE &CmndFileUpload, &CmndFileDownload, #endif // USE_MQTT_FILE &CmndMqttHost, &CmndMqttPort, &CmndMqttRetry, &CmndStateText, &CmndMqttClient, &CmndFullTopic, &CmndPrefix, &CmndGroupTopic, &CmndTopic, &CmndPublish, &CmndMqttlog, &CmndButtonTopic, &CmndSwitchTopic, &CmndButtonRetain, &CmndSwitchRetain, &CmndPowerRetain, &CmndSensorRetain, &CmndInfoRetain, &CmndStateRetain }; struct MQTT { uint16_t connect_count = 0; // MQTT re-connect count uint16_t retry_counter = 1; // MQTT connection retry counter uint16_t retry_counter_delay = 1; // MQTT retry counter multiplier uint8_t initial_connection_state = 2; // MQTT connection messages state bool connected = false; // MQTT virtual connection status bool allowed = false; // MQTT enabled and parameters valid bool mqtt_tls = false; // MQTT TLS is enabled bool disable_logging = false; // Temporarly disable logging on some commands } Mqtt; #ifdef USE_MQTT_TLS // This part of code is necessary to store Private Key and Cert in Flash #ifdef USE_MQTT_AWS_IOT #include const br_ec_private_key *AWS_IoT_Private_Key = nullptr; const br_x509_certificate *AWS_IoT_Client_Certificate = nullptr; class tls_entry_t { public: uint32_t name; // simple 4 letters name. Currently 'skey', 'crt ', 'crt1', 'crt2' uint16_t start; // start offset uint16_t len; // len of object }; // 8 bytes const static uint32_t TLS_NAME_SKEY = 0x2079656B; // 'key ' little endian const static uint32_t TLS_NAME_CRT = 0x20747263; // 'crt ' little endian class tls_dir_t { public: tls_entry_t entry[4]; // 4 entries max, only 4 used today, for future use }; // 4*8 = 64 bytes tls_dir_t tls_dir; // memory copy of tls_dir from flash #endif // USE_MQTT_AWS_IOT // check whether the fingerprint is filled with a single value // Filled with 0x00 = accept any fingerprint and learn it for next time // Filled with 0xFF = accept any fingerpring forever bool is_fingerprint_mono_value(uint8_t finger[20], uint8_t value) { for (uint32_t i = 0; i<20; i++) { if (finger[i] != value) { return false; } } return true; } #endif // USE_MQTT_TLS void MakeValidMqtt(uint32_t option, char* str) { // option 0 = replace by underscore // option 1 = delete character uint32_t i = 0; while (str[i] > 0) { // if ((str[i] == '/') || (str[i] == '+') || (str[i] == '#') || (str[i] == ' ')) { if ((str[i] == '+') || (str[i] == '#') || (str[i] == ' ')) { if (option) { uint32_t j = i; while (str[j] > 0) { str[j] = str[j +1]; j++; } i--; } else { str[i] = '_'; } } i++; } } void MqttDisableLogging(bool state) { // Disable logging only on repeating MQTT messages Mqtt.disable_logging = state; TasmotaGlobal.masterlog_level = (Mqtt.disable_logging) ? LOG_LEVEL_DEBUG_MORE : LOG_LEVEL_NONE; } /*********************************************************************************************\ * MQTT driver specific code need to provide the following functions: * * bool MqttIsConnected() * void MqttDisconnect() * void MqttSubscribeLib(char *topic) * bool MqttPublishLib(const char* topic, const uint8_t* payload, unsigned int plength, bool retained) \*********************************************************************************************/ #include // Max message size calculated by PubSubClient is (MQTT_MAX_PACKET_SIZE < 5 + 2 + strlen(topic) + plength) #if (MQTT_MAX_PACKET_SIZE -TOPSZ -7) < MIN_MESSZ // If the max message size is too small, throw an error at compile time. See PubSubClient.cpp line 359 #error "MQTT_MAX_PACKET_SIZE is too small in libraries/PubSubClient/src/PubSubClient.h, increase it to at least 1200" #endif PubSubClient MqttClient; void MqttInit(void) { #ifdef USE_MQTT_AZURE_IOT Settings.mqtt_port = 8883; #endif //USE_MQTT_AZURE_IOT #ifdef USE_MQTT_TLS if ((8883 == Settings.mqtt_port) || (8884 == Settings.mqtt_port)) { // Turn on TLS for port 8883 (TLS) and 8884 (TLS, client certificate) Settings.flag4.mqtt_tls = true; } Mqtt.mqtt_tls = Settings.flag4.mqtt_tls; // this flag should not change even if we change the SetOption (until reboot) // Detect AWS IoT and set default parameters String host = String(SettingsText(SET_MQTT_HOST)); if (host.indexOf(F(".iot.")) && host.endsWith(F(".amazonaws.com"))) { // look for ".iot." and ".amazonaws.com" in the domain name Settings.flag4.mqtt_no_retain = true; } if (Mqtt.mqtt_tls) { #ifdef ESP32 tlsClient = new BearSSL::WiFiClientSecure_light(2048,2048); #else // ESP32 - ESP8266 tlsClient = new BearSSL::WiFiClientSecure_light(1024,1024); #endif #ifdef USE_MQTT_AWS_IOT loadTlsDir(); // load key and certificate data from Flash if ((nullptr != AWS_IoT_Private_Key) && (nullptr != AWS_IoT_Client_Certificate)) { tlsClient->setClientECCert(AWS_IoT_Client_Certificate, AWS_IoT_Private_Key, 0xFFFF /* all usages, don't care */, 0); } #endif #ifdef USE_MQTT_TLS_CA_CERT tlsClient->setTrustAnchor(Tasmota_TA, nitems(Tasmota_TA)); #endif // USE_MQTT_TLS_CA_CERT MqttClient.setClient(*tlsClient); } else { MqttClient.setClient(EspClient); // non-TLS } #else // USE_MQTT_TLS MqttClient.setClient(EspClient); #endif // USE_MQTT_TLS MqttClient.setKeepAlive(Settings.mqtt_keepalive); MqttClient.setSocketTimeout(Settings.mqtt_socket_timeout); } #ifdef USE_MQTT_AZURE_IOT String Sha256Sign(String dataToSign, String preSharedKey){ AddLog(LOG_LEVEL_DEBUG, PSTR(D_LOG_MQTT "sha256 dataToSign is '%s'"), String(dataToSign).c_str()); char dataToSignChar[dataToSign.length() + 1]; dataToSign.toCharArray(dataToSignChar, dataToSign.length() + 1); unsigned char decodedPSK[32]; unsigned char encryptedSignature[100]; unsigned char encodedSignature[100]; br_sha256_context sha256_context; br_hmac_key_context hmac_key_context; br_hmac_context hmac_context; // need to base64 decode the Preshared key and the length int base64_decoded_device_length = decode_base64((unsigned char*)preSharedKey.c_str(), decodedPSK); // create the sha256 hmac and hash the data br_sha256_init(&sha256_context); br_hmac_key_init(&hmac_key_context, sha256_context.vtable, decodedPSK, base64_decoded_device_length); br_hmac_init(&hmac_context, &hmac_key_context, 32); br_hmac_update(&hmac_context, dataToSignChar, sizeof(dataToSignChar)-1); br_hmac_out(&hmac_context, encryptedSignature); // base64 decode the HMAC to a char encode_base64(encryptedSignature, br_hmac_size(&hmac_context), encodedSignature); // creating the real SAS Token AddLog(LOG_LEVEL_DEBUG, PSTR(D_LOG_MQTT "sha256 signature is '%s'"), String((char*)encodedSignature).c_str()); return String((char*)encodedSignature); } String urlEncodeBase64(String stringToEncode){ // correctly URL encoding the 64 characters of Base64 and the '=' sign stringToEncode.replace("+", "%2B"); stringToEncode.replace("=", "%3D"); stringToEncode.replace("/", "%2F"); return stringToEncode; } String AzurePSKtoToken(char *iotHubFQDN, const char *deviceId, const char *preSharedKey, int sasTTL = 86400){ int ttl = time(NULL) + sasTTL; String dataToSignString = urlEncodeBase64(String(iotHubFQDN) + "/devices/" + String(deviceId)) + "\n" + String(ttl); String signedData = Sha256Sign(dataToSignString, String(preSharedKey)); // creating the real SAS Token String realSASToken = "SharedAccessSignature sr=" + urlEncodeBase64(String(iotHubFQDN) + "/devices/" + String(deviceId)); realSASToken += "&sig=" + urlEncodeBase64(signedData) + "&se=" + String(ttl); AddLog(LOG_LEVEL_DEBUG, PSTR(D_LOG_MQTT "Azure IoT Hub SAS Token is '%s'"), realSASToken.c_str()); return realSASToken; } #if defined(USE_MQTT_AZURE_DPS_SCOPEID) && defined(USE_MQTT_AZURE_DPS_PRESHAREDKEY) String AzureDSPPSKtoToken(String scopeId, String deviceId, const char *preSharedKey, int sasTTL = 3600){ int ttl = time(NULL) + sasTTL; String dataToSignString = urlEncodeBase64(scopeId + "/registrations/" + deviceId) + "\n" + String(ttl); String signedData = Sha256Sign(dataToSignString, String(preSharedKey)); // creating the real SAS Token String realSASToken = "SharedAccessSignature sr=" + urlEncodeBase64(scopeId + "/registrations/" + deviceId); realSASToken += "&sig=" + urlEncodeBase64(signedData) + "&skn=registration" + "&se=" + String(ttl); AddLog(LOG_LEVEL_DEBUG, PSTR(D_LOG_MQTT "Azure DPS SAS Token is '%s'"), realSASToken.c_str()); return realSASToken; } void ProvisionAzureDPS(){ AddLog(LOG_LEVEL_INFO, PSTR(D_LOG_MQTT "Starting Azure DPS registration...")); // Scope and Key are derived from user_config_override.h, USE_MQTT_AZURE_DPS_SCOPE_ENDPOINT is optional String dPSScopeId = USE_MQTT_AZURE_DPS_SCOPEID; String dPSPreSharedKey = USE_MQTT_AZURE_DPS_PRESHAREDKEY; #if defined(USE_MQTT_AZURE_DPS_SCOPE_ENDPOINT) String endpoint=USE_MQTT_AZURE_DPS_SCOPE_ENDPOINT; #else String endpoint="https://global.azure-devices-provisioning.net/"; #endif //USE_MQTT_AZURE_DPS_SCOPE_ENDPOINT String MACAddress = WiFi.macAddress(); MACAddress.replace(":", ""); AddLog(LOG_LEVEL_DEBUG, PSTR(D_LOG_MQTT "DPS register for %s, scope %s to %s."), MACAddress.c_str(), dPSScopeId.c_str(), endpoint.c_str()); // derive our PSK from the DPS and set the device ID String devicePresharedKey = Sha256Sign(MACAddress, dPSPreSharedKey); char devicePresharedKeyChar[devicePresharedKey.length() + 1]; devicePresharedKey.toCharArray(devicePresharedKeyChar, devicePresharedKey.length() + 1); // generate a SAS Token with this new derived key String dPSSASToken = AzureDSPPSKtoToken(dPSScopeId, MACAddress, devicePresharedKey.c_str()); // REST to DPS to start the assigning process String dPSURL = endpoint + dPSScopeId + "/registrations/" + MACAddress + "/register?api-version=2019-03-31"; String dPSPutContent = "{\"registrationId\": \"" + MACAddress + "\"}"; httpsClient.setReuse(true); httpsClient.begin(*tlsHttpsClient, dPSURL); httpsClient.addHeader("User-Agent", "Tasmota"); httpsClient.addHeader("Content-Type", "application/json"); httpsClient.addHeader("Content-Encoding", "utf-8"); httpsClient.addHeader("Authorization", dPSSASToken); httpsClientReturn = httpsClient.PUT(dPSPutContent); String dPSAssigningResponseJSON; if (httpsClientReturn == HTTP_CODE_ACCEPTED){ dPSAssigningResponseJSON = httpsClient.getString(); AddLog(LOG_LEVEL_DEBUG, PSTR(D_LOG_MQTT "DPS Assigning response '%s'"), dPSAssigningResponseJSON.c_str()); } else { dPSAssigningResponseJSON = httpsClient.getString(); AddLog(LOG_LEVEL_DEBUG, PSTR(D_LOG_MQTT "DPS Assigning response '%s'"), dPSAssigningResponseJSON.c_str()); AddLog(LOG_LEVEL_ERROR, PSTR(D_LOG_MQTT "Azure DPS REST assignment connection failed with code '%d'. Restarting."), httpsClientReturn); WebRestart(1); } if (dPSAssigningResponseJSON.indexOf("\"assigning\"") == -1){ AddLog(LOG_LEVEL_ERROR, PSTR(D_LOG_MQTT "Azure DPS assignment failed with response '%s'. Restarting."), dPSAssigningResponseJSON.c_str()); WebRestart(1); } else { AddLog(LOG_LEVEL_DEBUG, PSTR(D_LOG_MQTT "Azure DPS assignment response '%s'."), dPSAssigningResponseJSON.c_str()); } httpsClient.end(); JsonParser dPSAssigningResponseParser((char*) dPSAssigningResponseJSON.c_str()); JsonParserObject dPSAssigningResponseRoot = dPSAssigningResponseParser.getRootObject(); String dPSAssigningOperationId = dPSAssigningResponseRoot.getStr("operationId"); AddLog(LOG_LEVEL_DEBUG, PSTR(D_LOG_MQTT "DPS operationId is '%s'."), dPSAssigningOperationId.c_str()); bool assigned = false; int assignedCounter = 1; String dPSAssignedResponseJSON; dPSURL = endpoint + dPSScopeId + "/registrations/" + MACAddress + "/operations/" + dPSAssigningOperationId + "?api-version=2019-03-31"; while (!assigned && assignedCounter < 5){ httpsClient.begin(*tlsHttpsClient, dPSURL); httpsClient.addHeader("User-Agent", "Tasmota"); httpsClient.addHeader("Content-Type", "application/json"); httpsClient.addHeader("Content-Encoding", "utf-8"); httpsClient.addHeader("Authorization", dPSSASToken); httpsClientReturn = httpsClient.GET(); if (httpsClientReturn == HTTP_CODE_OK){ dPSAssignedResponseJSON = httpsClient.getString(); } else if (httpsClientReturn != HTTP_CODE_ACCEPTED){ AddLog(LOG_LEVEL_ERROR, PSTR(D_LOG_MQTT "Azure DPS REST check connection failed with code '%d'."), httpsClientReturn); } if (dPSAssignedResponseJSON.indexOf("\"status\":\"assigned\"") > 0){ assigned = true; } else if (httpsClientReturn != HTTP_CODE_ACCEPTED) { AddLog(LOG_LEVEL_DEBUG, PSTR(D_LOG_MQTT "DPS try %d, response '%s'."), assignedCounter, dPSAssignedResponseJSON.c_str()); } delay(1000 * assignedCounter); assignedCounter+=1; } httpsClient.end(); if (assigned){ AddLog(LOG_LEVEL_DEBUG, PSTR(D_LOG_MQTT "Azure DPS registration response '%s'."), dPSAssignedResponseJSON.c_str()); JsonParser parser((char*) dPSAssignedResponseJSON.c_str()); JsonParserObject stateObject = parser.getRootObject()[PSTR("registrationState")].getObject(); String deviceId = stateObject["deviceId"].getStr(); String iotHub = stateObject["assignedHub"].getStr(); bool newProvision = false; if (String(SettingsText(SET_MQTT_PWD)) != devicePresharedKey || String(SettingsText(SET_MQTT_HOST)) != iotHub || String(SettingsText(SET_MQTT_CLIENT)) != deviceId || String(SettingsText(SET_MQTT_USER)) != deviceId) { newProvision = true; SettingsUpdateText(SET_MQTT_PWD, devicePresharedKey.c_str()); SettingsUpdateText(SET_MQTT_HOST, iotHub.c_str()); SettingsUpdateText(SET_MQTT_CLIENT, deviceId.c_str()); SettingsUpdateText(SET_MQTT_USER, deviceId.c_str()); } if (newProvision){ // because this is the first time we have been provisioned must reboot AddLog(LOG_LEVEL_INFO, PSTR(D_LOG_MQTT "Azure DPS registration success, changed in DPS registration, restarting.")); WebRestart(1); } else { AddLog(LOG_LEVEL_INFO, PSTR(D_LOG_MQTT "Azure DPS registration success, no changes.")); } } else { AddLog(LOG_LEVEL_ERROR, PSTR(D_LOG_MQTT "Azure DPS registration response failed with response '%s'."), dPSAssignedResponseJSON.c_str()); } } #endif // USE_MQTT_AZURE_DPS_SCOPEID #endif // USE_MQTT_AZURE_IOT bool MqttIsConnected(void) { return MqttClient.connected(); } void MqttDisconnect(void) { MqttClient.disconnect(); } void MqttSubscribeLib(const char *topic) { #ifdef USE_MQTT_AZURE_IOT // Azure IoT Hub currently does not support custom topics: https://docs.microsoft.com/en-us/azure/iot-hub/iot-hub-mqtt-support String realTopicString = "devices/" + String(SettingsText(SET_MQTT_CLIENT)); realTopicString += "/messages/devicebound/#"; MqttClient.subscribe(realTopicString.c_str()); SettingsUpdateText(SET_MQTT_FULLTOPIC, SettingsText(SET_MQTT_CLIENT)); SettingsUpdateText(SET_MQTT_TOPIC, SettingsText(SET_MQTT_CLIENT)); #else MqttClient.subscribe(topic); #endif // USE_MQTT_AZURE_IOT MqttClient.loop(); // Solve LmacRxBlk:1 messages } void MqttUnsubscribeLib(const char *topic) { MqttClient.unsubscribe(topic); MqttClient.loop(); // Solve LmacRxBlk:1 messages } bool MqttPublishLib(const char* topic, const uint8_t* payload, unsigned int plength, bool retained) { // If Prefix1 equals Prefix2 disable next MQTT subscription to prevent loop if (!strcmp(SettingsText(SET_MQTTPREFIX1), SettingsText(SET_MQTTPREFIX2))) { char *str = strstr(topic, SettingsText(SET_MQTTPREFIX1)); if (str == topic) { TasmotaGlobal.mqtt_cmnd_blocked_reset = 4; // Allow up to four seconds before resetting residual cmnd blocks TasmotaGlobal.mqtt_cmnd_blocked++; } } #ifdef USE_MQTT_AZURE_IOT String sourceTopicString = urlEncodeBase64(String(topic)); String topicString = "devices/" + String(SettingsText(SET_MQTT_CLIENT)); topicString += "/messages/events/topic=" + sourceTopicString; JsonParser mqtt_message((char*) String((const char*)payload).c_str()); JsonParserObject message_object = mqtt_message.getRootObject(); if (!message_object.isValid()) { // only sending valid JSON, yet this is optional AddLog(LOG_LEVEL_DEBUG, PSTR(D_LOG_MQTT "Invalid JSON for topic '%s', not sending to Azure IoT Hub"), topic); return true; } topic = topicString.c_str(); #endif // USE_MQTT_AZURE_IOT if (!MqttClient.beginPublish(topic, plength, retained)) { // AddLog(LOG_LEVEL_DEBUG, PSTR(D_LOG_MQTT "Connection lost or message too large")); return false; } uint32_t written = MqttClient.write(payload, plength); if (written != plength) { AddLog(LOG_LEVEL_DEBUG, PSTR(D_LOG_MQTT "Message too large")); return false; } MqttClient.endPublish(); yield(); // #3313 return true; } void MqttDataHandler(char* mqtt_topic, uint8_t* mqtt_data, unsigned int data_len) { #ifdef USE_DEBUG_DRIVER ShowFreeMem(PSTR("MqttDataHandler")); #endif // Do not allow more data than would be feasable within stack space if (data_len >= MQTT_MAX_PACKET_SIZE) { return; } // Do not execute multiple times if Prefix1 equals Prefix2 if (!strcmp(SettingsText(SET_MQTTPREFIX1), SettingsText(SET_MQTTPREFIX2))) { char *str = strstr(mqtt_topic, SettingsText(SET_MQTTPREFIX1)); if ((str == mqtt_topic) && TasmotaGlobal.mqtt_cmnd_blocked) { TasmotaGlobal.mqtt_cmnd_blocked--; return; } } #ifdef USE_MQTT_FILE FMqtt.topic_size = strlen(mqtt_topic); #endif // USE_MQTT_FILE // AddLog(LOG_LEVEL_DEBUG, PSTR(D_LOG_MQTT "BufferSize %d, Topic |%s|, Length %d, data_len %d"), MqttClient.getBufferSize(), mqtt_topic, strlen(mqtt_topic), data_len); char topic[TOPSZ]; #ifdef USE_MQTT_AZURE_IOT // for Azure, we read the topic from the property of the message String fullTopicString = String(mqtt_topic); String toppicUpper = fullTopicString; toppicUpper.toUpperCase(); int startOfTopic = toppicUpper.indexOf("TOPIC="); if (startOfTopic == -1){ AddLog(LOG_LEVEL_ERROR, PSTR(D_LOG_MQTT "Azure IoT message without the property topic.")); return; } String newTopic = fullTopicString.substring(startOfTopic + 6); newTopic.replace("%2F", "/"); if (newTopic.indexOf("/") == -1){ AddLog(LOG_LEVEL_ERROR, PSTR(D_LOG_MQTT "Invalid Topic %s"), newTopic.c_str()); return; } strlcpy(topic, newTopic.c_str(), sizeof(topic)); #else strlcpy(topic, mqtt_topic, sizeof(topic)); #endif // USE_MQTT_AZURE_IOT mqtt_data[data_len] = 0; if (Mqtt.disable_logging) { TasmotaGlobal.masterlog_level = LOG_LEVEL_DEBUG_MORE; // Hide logging } // MQTT pre-processing XdrvMailbox.index = strlen(topic); XdrvMailbox.data_len = data_len; XdrvMailbox.topic = topic; XdrvMailbox.data = (char*)mqtt_data; if (XdrvCall(FUNC_MQTT_DATA)) { return; } ShowSource(SRC_MQTT); CommandHandler(topic, (char*)mqtt_data, data_len); if (Mqtt.disable_logging) { TasmotaGlobal.masterlog_level = LOG_LEVEL_NONE; // Enable logging } } /*********************************************************************************************/ void MqttRetryCounter(uint8_t value) { Mqtt.retry_counter = value; } void MqttSubscribe(const char *topic) { AddLog(LOG_LEVEL_DEBUG, PSTR(D_LOG_MQTT D_SUBSCRIBE_TO " %s"), topic); MqttSubscribeLib(topic); } void MqttUnsubscribe(const char *topic) { AddLog(LOG_LEVEL_DEBUG, PSTR(D_LOG_MQTT D_UNSUBSCRIBE_FROM " %s"), topic); MqttUnsubscribeLib(topic); } void MqttPublishLoggingAsync(bool refresh) { static uint32_t index = 1; if (!Settings.mqttlog_level || !Settings.flag.mqtt_enabled || !Mqtt.connected) { return; } // SetOption3 - Enable MQTT if (refresh && !NeedLogRefresh(Settings.mqttlog_level, index)) { return; } char* line; size_t len; while (GetLog(Settings.mqttlog_level, &index, &line, &len)) { char stopic[TOPSZ]; GetTopic_P(stopic, STAT, TasmotaGlobal.mqtt_topic, PSTR("LOGGING")); // strlcpy(TasmotaGlobal.mqtt_data, line, len); // No JSON and ugly!! // MqttPublishLib(stopic, (const uint8_t*)TasmotaGlobal.mqtt_data, ResponseLength(), false); MqttPublishLib(stopic, (const uint8_t*)line, len -1, false); } } void MqttPublishPayload(const char* topic, const char* payload, uint32_t binary_length, bool retained) { // Publish payload string or binary when binary_length set with optional retained #ifdef USE_DEBUG_DRIVER ShowFreeMem(PSTR("MqttPublish")); #endif bool binary_data = (binary_length > 0); if (!binary_data) { binary_length = strlen(payload); } if (Settings.flag4.mqtt_no_retain) { // SetOption104 - Disable all MQTT retained messages, some brokers don't support it: AWS IoT, Losant retained = false; // Some brokers don't support retained, they will disconnect if received } String log_data; // 20210420 Moved to heap to solve tight stack resulting in exception 2 if (Settings.flag.mqtt_enabled && MqttPublishLib(topic, (const uint8_t*)payload, binary_length, retained)) { // SetOption3 - Enable MQTT log_data = F(D_LOG_MQTT); // MQT: log_data += topic; // stat/tasmota/STATUS2 } else { log_data = F(D_LOG_RESULT); // RSL: log_data += strrchr(topic,'/')+1; // STATUS2 retained = false; // Without MQTT enabled there is no retained message } log_data += F(" = "); // = log_data += (binary_data) ? HexToString((uint8_t*)payload, binary_length) : payload; if (retained) { log_data += F(" (" D_RETAINED ")"); } // (retained) AddLogData(LOG_LEVEL_INFO, log_data.c_str()); // MQT: stat/tasmota/STATUS2 = {"StatusFWR":{"Version":... if (Settings.ledstate &0x04) { TasmotaGlobal.blinks++; } } void MqttPublishPayload(const char* topic, const char* payload) { // Publish payload string no retained MqttPublishPayload(topic, payload, 0, false); } void MqttPublish(const char* topic, bool retained) { // Publish default TasmotaGlobal.mqtt_data string with optional retained MqttPublishPayload(topic, TasmotaGlobal.mqtt_data, 0, retained); } void MqttPublish(const char* topic) { // Publish default TasmotaGlobal.mqtt_data string no retained MqttPublish(topic, false); } void MqttPublishPayloadPrefixTopic_P(uint32_t prefix, const char* subtopic, const char* payload, uint32_t binary_length, bool retained) { /* Publish //> payload string or binary when binary_length set with optional retained prefix 0 = cmnd using subtopic prefix 1 = stat using subtopic prefix 2 = tele using subtopic prefix 4 = cmnd using subtopic or RESULT prefix 5 = stat using subtopic or RESULT prefix 6 = tele using subtopic or RESULT */ char romram[64]; snprintf_P(romram, sizeof(romram), ((prefix > 3) && !Settings.flag.mqtt_response) ? S_RSLT_RESULT : subtopic); // SetOption4 - Switch between MQTT RESULT or COMMAND UpperCase(romram, romram); prefix &= 3; char stopic[TOPSZ]; GetTopic_P(stopic, prefix, TasmotaGlobal.mqtt_topic, romram); MqttPublishPayload(stopic, payload, binary_length, retained); #if defined(USE_MQTT_AWS_IOT) || defined(USE_MQTT_AWS_IOT_LIGHT) if ((prefix > 0) && (Settings.flag4.awsiot_shadow) && (Mqtt.connected)) { // placeholder for SetOptionXX // compute the target topic char *topic = SettingsText(SET_MQTT_TOPIC); char topic2[strlen(topic)+1]; // save buffer onto stack strcpy(topic2, topic); // replace any '/' with '_' char *s = topic2; while (*s) { if ('/' == *s) { *s = '_'; } s++; } // update topic is "$aws/things//shadow/update" snprintf_P(romram, sizeof(romram), PSTR("$aws/things/%s/shadow/update"), topic2); // copy buffer String aws_payload = F("{\"state\":{\"reported\":%s}}"); aws_payload += payload; MqttClient.publish(romram, aws_payload.c_str(), false); AddLog(LOG_LEVEL_DEBUG, PSTR(D_LOG_MQTT "Updated shadow: %s"), romram); yield(); // #3313 } #endif // USE_MQTT_AWS_IOT } void MqttPublishPayloadPrefixTopic_P(uint32_t prefix, const char* subtopic, const char* payload, uint32_t binary_length) { // Publish //> payload string or binary when binary_length set no retained MqttPublishPayloadPrefixTopic_P(prefix, subtopic, payload, binary_length, false); } void MqttPublishPayloadPrefixTopic_P(uint32_t prefix, const char* subtopic, const char* payload) { // Publish //> payload string no retained MqttPublishPayloadPrefixTopic_P(prefix, subtopic, payload, 0, false); } void MqttPublishPrefixTopic_P(uint32_t prefix, const char* subtopic, bool retained) { // Publish //> default TasmotaGlobal.mqtt_data string with optional retained MqttPublishPayloadPrefixTopic_P(prefix, subtopic, TasmotaGlobal.mqtt_data, 0, retained); } void MqttPublishPrefixTopic_P(uint32_t prefix, const char* subtopic) { // Publish //> default TasmotaGlobal.mqtt_data string no retained MqttPublishPrefixTopic_P(prefix, subtopic, false); } void MqttPublishPrefixTopicRulesProcess_P(uint32_t prefix, const char* subtopic, bool retained) { // Publish //> default TasmotaGlobal.mqtt_data string with optional retained // then process rules MqttPublishPrefixTopic_P(prefix, subtopic, retained); XdrvRulesProcess(0); } void MqttPublishPrefixTopicRulesProcess_P(uint32_t prefix, const char* subtopic) { // Publish //> default TasmotaGlobal.mqtt_data string no retained // then process rules MqttPublishPrefixTopicRulesProcess_P(prefix, subtopic, false); } void MqttPublishTeleSensor(void) { // Publish tele//SENSOR default TasmotaGlobal.mqtt_data string with optional retained // then process rules MqttPublishPrefixTopicRulesProcess_P(TELE, PSTR(D_RSLT_SENSOR), Settings.flag.mqtt_sensor_retain); // CMND_SENSORRETAIN } void MqttPublishPowerState(uint32_t device) { char stopic[TOPSZ]; char scommand[33]; if ((device < 1) || (device > TasmotaGlobal.devices_present)) { device = 1; } #ifdef USE_SONOFF_IFAN if (IsModuleIfan() && (device > 1)) { if (GetFanspeed() < MaxFanspeed()) { // 4 occurs when fanspeed is 3 and RC button 2 is pressed #ifdef USE_DOMOTICZ DomoticzUpdateFanState(); // RC Button feedback #endif // USE_DOMOTICZ snprintf_P(scommand, sizeof(scommand), PSTR(D_CMND_FANSPEED)); GetTopic_P(stopic, STAT, TasmotaGlobal.mqtt_topic, (Settings.flag.mqtt_response) ? scommand : S_RSLT_RESULT); // SetOption4 - Switch between MQTT RESULT or COMMAND Response_P(S_JSON_COMMAND_NVALUE, scommand, GetFanspeed()); MqttPublish(stopic); } } else { #endif // USE_SONOFF_IFAN GetPowerDevice(scommand, device, sizeof(scommand), Settings.flag.device_index_enable); // SetOption26 - Switch between POWER or POWER1 GetTopic_P(stopic, STAT, TasmotaGlobal.mqtt_topic, (Settings.flag.mqtt_response) ? scommand : S_RSLT_RESULT); // SetOption4 - Switch between MQTT RESULT or COMMAND Response_P(S_JSON_COMMAND_SVALUE, scommand, GetStateText(bitRead(TasmotaGlobal.power, device -1))); MqttPublish(stopic); if (!Settings.flag4.only_json_message) { // SetOption90 - Disable non-json MQTT response GetTopic_P(stopic, STAT, TasmotaGlobal.mqtt_topic, scommand); Response_P(GetStateText(bitRead(TasmotaGlobal.power, device -1))); MqttPublish(stopic, Settings.flag.mqtt_power_retain); // CMND_POWERRETAIN } #ifdef USE_SONOFF_IFAN } #endif // USE_SONOFF_IFAN } void MqttPublishAllPowerState(void) { for (uint32_t i = 1; i <= TasmotaGlobal.devices_present; i++) { MqttPublishPowerState(i); #ifdef USE_SONOFF_IFAN if (IsModuleIfan()) { break; } // Report status of light relay only #endif // USE_SONOFF_IFAN } } void MqttPublishPowerBlinkState(uint32_t device) { char scommand[33]; if ((device < 1) || (device > TasmotaGlobal.devices_present)) { device = 1; } Response_P(PSTR("{\"%s\":\"" D_JSON_BLINK " %s\"}"), GetPowerDevice(scommand, device, sizeof(scommand), Settings.flag.device_index_enable), GetStateText(bitRead(TasmotaGlobal.blink_mask, device -1))); // SetOption26 - Switch between POWER or POWER1 MqttPublishPrefixTopicRulesProcess_P(RESULT_OR_STAT, S_RSLT_POWER); } /*********************************************************************************************/ uint16_t MqttConnectCount(void) { return Mqtt.connect_count; } void MqttDisconnected(int state) { Mqtt.connected = false; Mqtt.retry_counter = Settings.mqtt_retry * Mqtt.retry_counter_delay; if ((Settings.mqtt_retry * Mqtt.retry_counter_delay) < 120) { Mqtt.retry_counter_delay++; } MqttClient.disconnect(); AddLog(LOG_LEVEL_INFO, PSTR(D_LOG_MQTT D_CONNECT_FAILED_TO " %s:%d, rc %d. " D_RETRY_IN " %d " D_UNIT_SECOND), SettingsText(SET_MQTT_HOST), Settings.mqtt_port, state, Mqtt.retry_counter); TasmotaGlobal.rules_flag.mqtt_disconnected = 1; } void MqttConnected(void) { char stopic[TOPSZ]; if (Mqtt.allowed) { AddLog(LOG_LEVEL_INFO, PSTR(D_LOG_MQTT D_CONNECTED)); Mqtt.connected = true; Mqtt.retry_counter = 0; Mqtt.retry_counter_delay = 1; Mqtt.connect_count++; GetTopic_P(stopic, TELE, TasmotaGlobal.mqtt_topic, S_LWT); Response_P(PSTR(MQTT_LWT_ONLINE)); MqttPublish(stopic, true); if (!Settings.flag4.only_json_message) { // SetOption90 - Disable non-json MQTT response // Satisfy iobroker (#299) ResponseClear(); MqttPublishPrefixTopic_P(CMND, S_RSLT_POWER); } GetTopic_P(stopic, CMND, TasmotaGlobal.mqtt_topic, PSTR("#")); MqttSubscribe(stopic); if (strstr_P(SettingsText(SET_MQTT_FULLTOPIC), MQTT_TOKEN_TOPIC) != nullptr) { uint32_t real_index = SET_MQTT_GRP_TOPIC; for (uint32_t i = 0; i < MAX_GROUP_TOPICS; i++) { if (1 == i) { real_index = SET_MQTT_GRP_TOPIC2 -1; } if (strlen(SettingsText(real_index +i))) { GetGroupTopic_P(stopic, PSTR("#"), real_index +i); // SetOption75 0: %prefix%/nothing/%topic% = cmnd/nothing//# or SetOption75 1: cmnd/ MqttSubscribe(stopic); } } GetFallbackTopic_P(stopic, PSTR("#")); MqttSubscribe(stopic); } XdrvCall(FUNC_MQTT_SUBSCRIBE); } if (Mqtt.initial_connection_state) { if (ResetReason() != REASON_DEEP_SLEEP_AWAKE) { char stopic2[TOPSZ]; Response_P(PSTR("{\"Info1\":{\"" D_CMND_MODULE "\":\"%s\",\"" D_JSON_VERSION "\":\"%s%s\",\"" D_JSON_FALLBACKTOPIC "\":\"%s\",\"" D_CMND_GROUPTOPIC "\":\"%s\"}}"), ModuleName().c_str(), TasmotaGlobal.version, TasmotaGlobal.image_name, GetFallbackTopic_P(stopic, ""), GetGroupTopic_P(stopic2, "", SET_MQTT_GRP_TOPIC)); MqttPublishPrefixTopicRulesProcess_P(TELE, PSTR(D_RSLT_INFO "1"), Settings.flag5.mqtt_info_retain); #ifdef USE_WEBSERVER if (Settings.webserver) { #if LWIP_IPV6 Response_P(PSTR("{\"Info2\":{\"" D_JSON_WEBSERVER_MODE "\":\"%s\",\"" D_CMND_HOSTNAME "\":\"%s\",\"" D_CMND_IPADDRESS "\":\"%s\",\"IPv6Address\":\"%s\"}}"), (2 == Settings.webserver) ? PSTR(D_ADMIN) : PSTR(D_USER), NetworkHostname(), NetworkAddress().toString().c_str(), WifiGetIPv6().c_str(), Settings.flag5.mqtt_info_retain); #else Response_P(PSTR("{\"Info2\":{\"" D_JSON_WEBSERVER_MODE "\":\"%s\",\"" D_CMND_HOSTNAME "\":\"%s\",\"" D_CMND_IPADDRESS "\":\"%s\"}}"), (2 == Settings.webserver) ? PSTR(D_ADMIN) : PSTR(D_USER), NetworkHostname(), NetworkAddress().toString().c_str(), Settings.flag5.mqtt_info_retain); #endif // LWIP_IPV6 = 1 MqttPublishPrefixTopicRulesProcess_P(TELE, PSTR(D_RSLT_INFO "2"), Settings.flag5.mqtt_info_retain); } #endif // USE_WEBSERVER Response_P(PSTR("{\"Info3\":{\"" D_JSON_RESTARTREASON "\":")); if (CrashFlag()) { CrashDump(); } else { ResponseAppend_P(PSTR("\"%s\""), GetResetReason().c_str()); } ResponseJsonEndEnd(); MqttPublishPrefixTopicRulesProcess_P(TELE, PSTR(D_RSLT_INFO "3"), Settings.flag5.mqtt_info_retain); } MqttPublishAllPowerState(); if (Settings.tele_period) { TasmotaGlobal.tele_period = Settings.tele_period -5; // Enable TelePeriod in 5 seconds } TasmotaGlobal.rules_flag.system_boot = 1; XdrvCall(FUNC_MQTT_INIT); } Mqtt.initial_connection_state = 0; TasmotaGlobal.global_state.mqtt_down = 0; if (Settings.flag.mqtt_enabled) { // SetOption3 - Enable MQTT TasmotaGlobal.rules_flag.mqtt_connected = 1; } } void MqttReconnect(void) { char stopic[TOPSZ]; Mqtt.allowed = Settings.flag.mqtt_enabled; // SetOption3 - Enable MQTT if (Mqtt.allowed) { #if defined(USE_MQTT_AZURE_DPS_SCOPEID) && defined(USE_MQTT_AZURE_DPS_PRESHAREDKEY) ProvisionAzureDPS(); #endif #ifdef USE_DISCOVERY #ifdef MQTT_HOST_DISCOVERY MqttDiscoverServer(); #endif // MQTT_HOST_DISCOVERY #endif // USE_DISCOVERY if (!strlen(SettingsText(SET_MQTT_HOST)) || !Settings.mqtt_port) { Mqtt.allowed = false; } #if defined(USE_MQTT_TLS) && defined(USE_MQTT_AWS_IOT) // don't enable MQTT for AWS IoT if Private Key or Certificate are not set if (Mqtt.mqtt_tls) { if (0 == strlen(SettingsText(SET_MQTT_PWD))) { // we anticipate that an empty password does not make sense with TLS. This avoids failed connections Mqtt.allowed = false; } } #endif } if (!Mqtt.allowed) { MqttConnected(); return; } #ifdef USE_EMULATION UdpDisconnect(); #endif // USE_EMULATION Mqtt.connected = false; Mqtt.retry_counter = Settings.mqtt_retry * Mqtt.retry_counter_delay; TasmotaGlobal.global_state.mqtt_down = 1; #ifdef FIRMWARE_MINIMAL #ifndef USE_MQTT_TLS // Don't try to connect if MQTT requires TLS but TLS is not supported if (Settings.flag4.mqtt_tls) { return; } #endif #endif AddLog(LOG_LEVEL_INFO, PSTR(D_LOG_MQTT D_ATTEMPTING_CONNECTION)); char *mqtt_user = nullptr; char *mqtt_pwd = nullptr; if (strlen(SettingsText(SET_MQTT_USER))) { mqtt_user = SettingsText(SET_MQTT_USER); } if (strlen(SettingsText(SET_MQTT_PWD))) { mqtt_pwd = SettingsText(SET_MQTT_PWD); } GetTopic_P(stopic, TELE, TasmotaGlobal.mqtt_topic, S_LWT); Response_P(S_LWT_OFFLINE); if (MqttClient.connected()) { MqttClient.disconnect(); } EspClient.setTimeout(MQTT_WIFI_CLIENT_TIMEOUT); #ifdef USE_MQTT_TLS if (Mqtt.mqtt_tls) { tlsClient->stop(); } else { // EspClient = WiFiClient(); // Wifi Client reconnect issue 4497 (https://github.com/esp8266/Arduino/issues/4497) MqttClient.setClient(EspClient); } #else // EspClient = WiFiClient(); // Wifi Client reconnect issue 4497 (https://github.com/esp8266/Arduino/issues/4497) MqttClient.setClient(EspClient); #endif if (2 == Mqtt.initial_connection_state) { // Executed once just after power on and wifi is connected Mqtt.initial_connection_state = 1; } MqttClient.setCallback(MqttDataHandler); #if defined(USE_MQTT_TLS) && defined(USE_MQTT_AWS_IOT) // re-assign private keys in case it was updated in between if (Mqtt.mqtt_tls) { if ((nullptr != AWS_IoT_Private_Key) && (nullptr != AWS_IoT_Client_Certificate)) { tlsClient->setClientECCert(AWS_IoT_Client_Certificate, AWS_IoT_Private_Key, 0xFFFF /* all usages, don't care */, 0); } } #endif MqttClient.setServer(SettingsText(SET_MQTT_HOST), Settings.mqtt_port); uint32_t mqtt_connect_time = millis(); #if defined(USE_MQTT_TLS) && !defined(USE_MQTT_TLS_CA_CERT) bool allow_all_fingerprints; bool learn_fingerprint1; bool learn_fingerprint2; if (Mqtt.mqtt_tls) { allow_all_fingerprints = false; learn_fingerprint1 = is_fingerprint_mono_value(Settings.mqtt_fingerprint[0], 0x00); learn_fingerprint2 = is_fingerprint_mono_value(Settings.mqtt_fingerprint[1], 0x00); allow_all_fingerprints |= is_fingerprint_mono_value(Settings.mqtt_fingerprint[0], 0xff); allow_all_fingerprints |= is_fingerprint_mono_value(Settings.mqtt_fingerprint[1], 0xff); allow_all_fingerprints |= learn_fingerprint1; allow_all_fingerprints |= learn_fingerprint2; tlsClient->setPubKeyFingerprint(Settings.mqtt_fingerprint[0], Settings.mqtt_fingerprint[1], allow_all_fingerprints); } #endif bool lwt_retain = Settings.flag4.mqtt_no_retain ? false : true; // no retained last will if "no_retain" #if defined(USE_MQTT_TLS) && defined(USE_MQTT_AWS_IOT) if (Mqtt.mqtt_tls) { if ((nullptr != AWS_IoT_Private_Key) && (nullptr != AWS_IoT_Client_Certificate)) { // if private key is there, we remove user/pwd mqtt_user = nullptr; mqtt_pwd = nullptr; } } #endif #ifdef USE_MQTT_AZURE_IOT String azureMqtt_password = SettingsText(SET_MQTT_PWD); if (azureMqtt_password.indexOf("SharedAccessSignature") == -1) { // assuming a PreSharedKey was provided, calculating a SAS Token into azureMqtt_password AddLog(LOG_LEVEL_INFO, PSTR(D_LOG_MQTT "Authenticating with an Azure IoT Hub Token")); azureMqtt_password = AzurePSKtoToken(SettingsText(SET_MQTT_HOST), SettingsText(SET_MQTT_CLIENT), SettingsText(SET_MQTT_PWD)); } String azureMqtt_userString = String(SettingsText(SET_MQTT_HOST)) + "/" + String(SettingsText(SET_MQTT_CLIENT)); + "/?api-version=2018-06-30"; if (MqttClient.connect(TasmotaGlobal.mqtt_client, azureMqtt_userString.c_str(), azureMqtt_password.c_str(), stopic, 1, lwt_retain, TasmotaGlobal.mqtt_data, MQTT_CLEAN_SESSION)) { #else if (MqttClient.connect(TasmotaGlobal.mqtt_client, mqtt_user, mqtt_pwd, stopic, 1, lwt_retain, TasmotaGlobal.mqtt_data, MQTT_CLEAN_SESSION)) { #endif // USE_MQTT_AZURE_IOT #ifdef USE_MQTT_TLS if (Mqtt.mqtt_tls) { #ifdef ESP8266 AddLog(LOG_LEVEL_INFO, PSTR(D_LOG_MQTT "TLS connected in %d ms, max ThunkStack used %d"), millis() - mqtt_connect_time, tlsClient->getMaxThunkStackUse()); #elif defined(ESP32) AddLog(LOG_LEVEL_INFO, PSTR(D_LOG_MQTT "TLS connected in %d ms, stack low mark %d"), millis() - mqtt_connect_time, uxTaskGetStackHighWaterMark(nullptr)); #endif if (!tlsClient->getMFLNStatus()) { AddLog(LOG_LEVEL_INFO, PSTR(D_LOG_MQTT "MFLN not supported by TLS server")); } #ifndef USE_MQTT_TLS_CA_CERT // don't bother with fingerprints if using CA validation const uint8_t *recv_fingerprint = tlsClient->getRecvPubKeyFingerprint(); // create a printable version of the fingerprint received char buf_fingerprint[64]; ToHex_P(recv_fingerprint, 20, buf_fingerprint, sizeof(buf_fingerprint), ' '); AddLog(LOG_LEVEL_DEBUG, PSTR(D_LOG_MQTT "Server fingerprint: %s"), buf_fingerprint); bool learned = false; // If the fingerprint slot is marked for update, we'll do so. // Otherwise, if the fingerprint slot had the magic trust-on-first-use // value, we will save the current fingerprint there, but only if the other fingerprint slot // *didn't* match it. if (recv_fingerprint[20] & 0x1 || (learn_fingerprint1 && 0 != memcmp(recv_fingerprint, Settings.mqtt_fingerprint[1], 20))) { memcpy(Settings.mqtt_fingerprint[0], recv_fingerprint, 20); learned = true; } // As above, but for the other slot. if (recv_fingerprint[20] & 0x2 || (learn_fingerprint2 && 0 != memcmp(recv_fingerprint, Settings.mqtt_fingerprint[0], 20))) { memcpy(Settings.mqtt_fingerprint[1], recv_fingerprint, 20); learned = true; } if (learned) { AddLog(LOG_LEVEL_INFO, PSTR(D_LOG_MQTT "Fingerprint learned: %s"), buf_fingerprint); SettingsSaveAll(); // save settings } #endif // !USE_MQTT_TLS_CA_CERT } #endif // USE_MQTT_TLS MqttConnected(); } else { #ifdef USE_MQTT_TLS if (Mqtt.mqtt_tls) { AddLog(LOG_LEVEL_INFO, PSTR(D_LOG_MQTT "TLS connection error: %d"), tlsClient->getLastError()); } #endif MqttDisconnected(MqttClient.state()); // status codes are documented here http://pubsubclient.knolleary.net/api.html#state } } void MqttCheck(void) { if (Settings.flag.mqtt_enabled) { // SetOption3 - Enable MQTT if (!MqttIsConnected()) { TasmotaGlobal.global_state.mqtt_down = 1; if (!Mqtt.retry_counter) { MqttReconnect(); } else { Mqtt.retry_counter--; } } else { TasmotaGlobal.global_state.mqtt_down = 0; } } else { TasmotaGlobal.global_state.mqtt_down = 0; if (Mqtt.initial_connection_state) { MqttReconnect(); } } } bool KeyTopicActive(uint32_t key) { // key = 0 - Button topic // key = 1 - Switch topic key &= 1; char key_topic[TOPSZ]; Format(key_topic, SettingsText(SET_MQTT_BUTTON_TOPIC + key), sizeof(key_topic)); return ((strlen(key_topic) != 0) && strcmp(key_topic, "0")); } /*********************************************************************************************\ * Commands \*********************************************************************************************/ #if defined(USE_MQTT_TLS) && !defined(USE_MQTT_TLS_CA_CERT) void CmndMqttFingerprint(void) { if ((XdrvMailbox.index > 0) && (XdrvMailbox.index <= 2)) { char fingerprint[60]; if ((XdrvMailbox.data_len > 0) && (XdrvMailbox.data_len < sizeof(fingerprint))) { if (SC_DEFAULT == Shortcut()) { memcpy_P(Settings.mqtt_fingerprint[XdrvMailbox.index -1], (1 == XdrvMailbox.index) ? default_fingerprint1 : default_fingerprint2, sizeof(default_fingerprint1)); } else { strlcpy(fingerprint, (SC_CLEAR == Shortcut()) ? "" : XdrvMailbox.data, sizeof(fingerprint)); char *p = fingerprint; for (uint32_t i = 0; i < 20; i++) { Settings.mqtt_fingerprint[XdrvMailbox.index -1][i] = strtol(p, &p, 16); } } TasmotaGlobal.restart_flag = 2; } ResponseCmndIdxChar(ToHex_P((unsigned char *)Settings.mqtt_fingerprint[XdrvMailbox.index -1], 20, fingerprint, sizeof(fingerprint), ' ')); } } #endif void CmndMqttUser(void) { if (XdrvMailbox.data_len > 0) { SettingsUpdateText(SET_MQTT_USER, (SC_CLEAR == Shortcut()) ? "" : (SC_DEFAULT == Shortcut()) ? PSTR(MQTT_USER) : XdrvMailbox.data); TasmotaGlobal.restart_flag = 2; } ResponseCmndChar(SettingsText(SET_MQTT_USER)); } void CmndMqttPassword(void) { bool show_asterisk = (2 == XdrvMailbox.index); if (XdrvMailbox.data_len > 0) { SettingsUpdateText(SET_MQTT_PWD, (SC_CLEAR == Shortcut()) ? "" : (SC_DEFAULT == Shortcut()) ? PSTR(MQTT_PASS) : XdrvMailbox.data); if (!show_asterisk) { ResponseCmndChar(SettingsText(SET_MQTT_PWD)); } TasmotaGlobal.restart_flag = 2; } else { show_asterisk = true; } if (show_asterisk) { Response_P(S_JSON_COMMAND_ASTERISK, XdrvMailbox.command); } } void CmndMqttKeepAlive(void) { if ((XdrvMailbox.payload >= 1) && (XdrvMailbox.payload <= 100)) { Settings.mqtt_keepalive = XdrvMailbox.payload; #ifdef USE_MQTT_NEW_PUBSUBCLIENT MqttClient.setKeepAlive(Settings.mqtt_keepalive); #endif } ResponseCmndNumber(Settings.mqtt_keepalive); } void CmndMqttTimeout(void) { if ((XdrvMailbox.payload >= 1) && (XdrvMailbox.payload <= 100)) { Settings.mqtt_socket_timeout = XdrvMailbox.payload; #ifdef USE_MQTT_NEW_PUBSUBCLIENT MqttClient.setSocketTimeout(Settings.mqtt_socket_timeout); #endif } ResponseCmndNumber(Settings.mqtt_socket_timeout); } void CmndMqttlog(void) { if ((XdrvMailbox.payload >= LOG_LEVEL_NONE) && (XdrvMailbox.payload <= LOG_LEVEL_DEBUG_MORE)) { Settings.mqttlog_level = XdrvMailbox.payload; } ResponseCmndNumber(Settings.mqttlog_level); } void CmndMqttHost(void) { if (XdrvMailbox.data_len > 0) { SettingsUpdateText(SET_MQTT_HOST, (SC_CLEAR == Shortcut()) ? "" : (SC_DEFAULT == Shortcut()) ? MQTT_HOST : XdrvMailbox.data); TasmotaGlobal.restart_flag = 2; } ResponseCmndChar(SettingsText(SET_MQTT_HOST)); } void CmndMqttPort(void) { if ((XdrvMailbox.payload > 0) && (XdrvMailbox.payload < 65536)) { Settings.mqtt_port = (1 == XdrvMailbox.payload) ? MQTT_PORT : XdrvMailbox.payload; TasmotaGlobal.restart_flag = 2; } ResponseCmndNumber(Settings.mqtt_port); } void CmndMqttRetry(void) { if ((XdrvMailbox.payload >= MQTT_RETRY_SECS) && (XdrvMailbox.payload < 32001)) { Settings.mqtt_retry = XdrvMailbox.payload; Mqtt.retry_counter = Settings.mqtt_retry; } ResponseCmndNumber(Settings.mqtt_retry); } void CmndStateText(void) { if ((XdrvMailbox.index > 0) && (XdrvMailbox.index <= MAX_STATE_TEXT)) { if (!XdrvMailbox.usridx) { ResponseCmndAll(SET_STATE_TXT1, MAX_STATE_TEXT); } else { if (XdrvMailbox.data_len > 0) { for (uint32_t i = 0; i <= XdrvMailbox.data_len; i++) { if (XdrvMailbox.data[i] == ' ') XdrvMailbox.data[i] = '_'; } SettingsUpdateText(SET_STATE_TXT1 + XdrvMailbox.index -1, XdrvMailbox.data); } ResponseCmndIdxChar(GetStateText(XdrvMailbox.index -1)); } } } void CmndMqttClient(void) { if (!XdrvMailbox.grpflg && (XdrvMailbox.data_len > 0)) { SettingsUpdateText(SET_MQTT_CLIENT, (SC_DEFAULT == Shortcut()) ? PSTR(MQTT_CLIENT_ID) : XdrvMailbox.data); TasmotaGlobal.restart_flag = 2; } ResponseCmndChar(SettingsText(SET_MQTT_CLIENT)); } void CmndFullTopic(void) { if (XdrvMailbox.data_len > 0) { MakeValidMqtt(1, XdrvMailbox.data); if (!strcmp(XdrvMailbox.data, TasmotaGlobal.mqtt_client)) { SetShortcutDefault(); } char stemp1[TOPSZ]; strlcpy(stemp1, (SC_DEFAULT == Shortcut()) ? MQTT_FULLTOPIC : XdrvMailbox.data, sizeof(stemp1)); if (strcmp(stemp1, SettingsText(SET_MQTT_FULLTOPIC))) { Response_P((Settings.flag.mqtt_offline) ? S_LWT_OFFLINE : ""); // SetOption10 - Control MQTT LWT message format MqttPublishPrefixTopic_P(TELE, S_LWT, true); // Offline or remove previous retained topic SettingsUpdateText(SET_MQTT_FULLTOPIC, stemp1); TasmotaGlobal.restart_flag = 2; } } ResponseCmndChar(SettingsText(SET_MQTT_FULLTOPIC)); } void CmndPrefix(void) { if ((XdrvMailbox.index > 0) && (XdrvMailbox.index <= MAX_MQTT_PREFIXES)) { if (!XdrvMailbox.usridx) { ResponseCmndAll(SET_MQTTPREFIX1, MAX_MQTT_PREFIXES); } else { if (XdrvMailbox.data_len > 0) { MakeValidMqtt(0, XdrvMailbox.data); SettingsUpdateText(SET_MQTTPREFIX1 + XdrvMailbox.index -1, (SC_DEFAULT == Shortcut()) ? (1==XdrvMailbox.index) ? PSTR(SUB_PREFIX) : (2==XdrvMailbox.index) ? PSTR(PUB_PREFIX) : PSTR(PUB_PREFIX2) : XdrvMailbox.data); TasmotaGlobal.restart_flag = 2; } ResponseCmndIdxChar(SettingsText(SET_MQTTPREFIX1 + XdrvMailbox.index -1)); } } } void CmndPublish(void) { // Allow wildcard character "#" as space replacement in topic (#10258) // publish cmnd/theo#arends/power 2 ==> publish cmnd/theo arends/power 2 if (XdrvMailbox.data_len > 0) { char *payload_part; char *mqtt_part = strtok_r(XdrvMailbox.data, " ", &payload_part); if (mqtt_part) { char stemp1[TOPSZ]; strlcpy(stemp1, mqtt_part, sizeof(stemp1)); ReplaceChar(stemp1, '#', ' '); if ((payload_part != nullptr) && strlen(payload_part)) { Response_P(payload_part); } else { ResponseClear(); } MqttPublish(stemp1, (XdrvMailbox.index == 2)); ResponseClear(); } } } void CmndGroupTopic(void) { if ((XdrvMailbox.index > 0) && (XdrvMailbox.index <= MAX_GROUP_TOPICS)) { if (XdrvMailbox.data_len > 0) { uint32_t settings_text_index = (1 == XdrvMailbox.index) ? SET_MQTT_GRP_TOPIC : SET_MQTT_GRP_TOPIC2 + XdrvMailbox.index - 2; MakeValidMqtt(0, XdrvMailbox.data); if (!strcmp(XdrvMailbox.data, TasmotaGlobal.mqtt_client)) { SetShortcutDefault(); } SettingsUpdateText(settings_text_index, (SC_CLEAR == Shortcut()) ? "" : (SC_DEFAULT == Shortcut()) ? PSTR(MQTT_GRPTOPIC) : XdrvMailbox.data); // Eliminate duplicates, have at least one and fill from index 1 char stemp[MAX_GROUP_TOPICS][TOPSZ]; uint32_t read_index = 0; uint32_t real_index = SET_MQTT_GRP_TOPIC; for (uint32_t i = 0; i < MAX_GROUP_TOPICS; i++) { if (1 == i) { real_index = SET_MQTT_GRP_TOPIC2 -1; } if (strlen(SettingsText(real_index +i))) { bool not_equal = true; for (uint32_t j = 0; j < read_index; j++) { if (!strcmp(SettingsText(real_index +i), stemp[j])) { // Topics are case-sensitive not_equal = false; } } if (not_equal) { strncpy(stemp[read_index], SettingsText(real_index +i), sizeof(stemp[read_index])); read_index++; } } } if (0 == read_index) { SettingsUpdateText(SET_MQTT_GRP_TOPIC, PSTR(MQTT_GRPTOPIC)); } else { uint32_t write_index = 0; uint32_t real_index = SET_MQTT_GRP_TOPIC; for (uint32_t i = 0; i < MAX_GROUP_TOPICS; i++) { if (1 == i) { real_index = SET_MQTT_GRP_TOPIC2 -1; } if (write_index < read_index) { SettingsUpdateText(real_index +i, stemp[write_index]); write_index++; } else { SettingsUpdateText(real_index +i, ""); } } } TasmotaGlobal.restart_flag = 2; } ResponseCmndAll(SET_MQTT_GRP_TOPIC, MAX_GROUP_TOPICS); } } void CmndTopic(void) { if (!XdrvMailbox.grpflg && (XdrvMailbox.data_len > 0)) { MakeValidMqtt(0, XdrvMailbox.data); if (!strcmp(XdrvMailbox.data, TasmotaGlobal.mqtt_client)) { SetShortcutDefault(); } char stemp1[TOPSZ]; strlcpy(stemp1, (SC_DEFAULT == Shortcut()) ? MQTT_TOPIC : XdrvMailbox.data, sizeof(stemp1)); if (strcmp(stemp1, SettingsText(SET_MQTT_TOPIC))) { Response_P((Settings.flag.mqtt_offline) ? S_LWT_OFFLINE : ""); // SetOption10 - Control MQTT LWT message format MqttPublishPrefixTopic_P(TELE, S_LWT, true); // Offline or remove previous retained topic SettingsUpdateText(SET_MQTT_TOPIC, stemp1); TasmotaGlobal.restart_flag = 2; } } ResponseCmndChar(SettingsText(SET_MQTT_TOPIC)); } void CmndButtonTopic(void) { if (!XdrvMailbox.grpflg && (XdrvMailbox.data_len > 0)) { MakeValidMqtt(0, XdrvMailbox.data); if (!strcmp(XdrvMailbox.data, TasmotaGlobal.mqtt_client)) { SetShortcutDefault(); } switch (Shortcut()) { case SC_CLEAR: SettingsUpdateText(SET_MQTT_BUTTON_TOPIC, ""); break; case SC_DEFAULT: SettingsUpdateText(SET_MQTT_BUTTON_TOPIC, TasmotaGlobal.mqtt_topic); break; case SC_USER: SettingsUpdateText(SET_MQTT_BUTTON_TOPIC, MQTT_BUTTON_TOPIC); break; default: SettingsUpdateText(SET_MQTT_BUTTON_TOPIC, XdrvMailbox.data); } } ResponseCmndChar(SettingsText(SET_MQTT_BUTTON_TOPIC)); } void CmndSwitchTopic(void) { if (!XdrvMailbox.grpflg && (XdrvMailbox.data_len > 0)) { MakeValidMqtt(0, XdrvMailbox.data); if (!strcmp(XdrvMailbox.data, TasmotaGlobal.mqtt_client)) { SetShortcutDefault(); } switch (Shortcut()) { case SC_CLEAR: SettingsUpdateText(SET_MQTT_SWITCH_TOPIC, ""); break; case SC_DEFAULT: SettingsUpdateText(SET_MQTT_SWITCH_TOPIC, TasmotaGlobal.mqtt_topic); break; case SC_USER: SettingsUpdateText(SET_MQTT_SWITCH_TOPIC, PSTR(MQTT_SWITCH_TOPIC)); break; default: SettingsUpdateText(SET_MQTT_SWITCH_TOPIC, XdrvMailbox.data); } } ResponseCmndChar(SettingsText(SET_MQTT_SWITCH_TOPIC)); } void CmndButtonRetain(void) { if ((XdrvMailbox.payload >= 0) && (XdrvMailbox.payload <= 1)) { if (!XdrvMailbox.payload) { for (uint32_t i = 1; i <= MAX_KEYS; i++) { SendKey(KEY_BUTTON, i, CLEAR_RETAIN); // Clear MQTT retain in broker } } Settings.flag.mqtt_button_retain = XdrvMailbox.payload; // CMND_BUTTONRETAIN } ResponseCmndStateText(Settings.flag.mqtt_button_retain); // CMND_BUTTONRETAIN } void CmndSwitchRetain(void) { if ((XdrvMailbox.payload >= 0) && (XdrvMailbox.payload <= 1)) { if (!XdrvMailbox.payload) { for (uint32_t i = 1; i <= MAX_SWITCHES; i++) { SendKey(KEY_SWITCH, i, CLEAR_RETAIN); // Clear MQTT retain in broker } } Settings.flag.mqtt_switch_retain = XdrvMailbox.payload; // CMND_SWITCHRETAIN } ResponseCmndStateText(Settings.flag.mqtt_switch_retain); // CMND_SWITCHRETAIN } void CmndPowerRetain(void) { if ((XdrvMailbox.payload >= 0) && (XdrvMailbox.payload <= 1)) { if (!XdrvMailbox.payload) { char stemp1[TOPSZ]; char scommand[CMDSZ]; for (uint32_t i = 1; i <= TasmotaGlobal.devices_present; i++) { // Clear MQTT retain in broker GetTopic_P(stemp1, STAT, TasmotaGlobal.mqtt_topic, GetPowerDevice(scommand, i, sizeof(scommand), Settings.flag.device_index_enable)); // SetOption26 - Switch between POWER or POWER1 ResponseClear(); MqttPublish(stemp1, Settings.flag.mqtt_power_retain); // CMND_POWERRETAIN } } Settings.flag.mqtt_power_retain = XdrvMailbox.payload; // CMND_POWERRETAIN if (Settings.flag.mqtt_power_retain) { Settings.flag4.only_json_message = 0; // SetOption90 - Disable non-json MQTT response } } ResponseCmndStateText(Settings.flag.mqtt_power_retain); // CMND_POWERRETAIN } void CmndSensorRetain(void) { if ((XdrvMailbox.payload >= 0) && (XdrvMailbox.payload <= 1)) { if (!XdrvMailbox.payload) { ResponseClear(); MqttPublishPrefixTopic_P(TELE, PSTR(D_RSLT_SENSOR), Settings.flag.mqtt_sensor_retain); // CMND_SENSORRETAIN MqttPublishPrefixTopic_P(TELE, PSTR(D_RSLT_ENERGY), Settings.flag.mqtt_sensor_retain); // CMND_SENSORRETAIN } Settings.flag.mqtt_sensor_retain = XdrvMailbox.payload; // CMND_SENSORRETAIN } ResponseCmndStateText(Settings.flag.mqtt_sensor_retain); // CMND_SENSORRETAIN } void CmndInfoRetain(void) { if ((XdrvMailbox.payload >= 0) && (XdrvMailbox.payload <= 1)) { if (!XdrvMailbox.payload) { ResponseClear(); MqttPublishPrefixTopic_P(TELE, PSTR(D_RSLT_INFO), Settings.flag5.mqtt_info_retain); // CMND_INFORETAIN } Settings.flag5.mqtt_info_retain = XdrvMailbox.payload; // CMND_INFORETAIN } ResponseCmndStateText(Settings.flag5.mqtt_info_retain); // CMND_INFORETAIN } void CmndStateRetain(void) { if ((XdrvMailbox.payload >= 0) && (XdrvMailbox.payload <= 1)) { if (!XdrvMailbox.payload) { ResponseClear(); MqttPublishPrefixTopic_P(STAT, PSTR(D_RSLT_STATE), Settings.flag5.mqtt_state_retain); // CMND_STATERETAIN } Settings.flag5.mqtt_state_retain = XdrvMailbox.payload; // CMND_STATERETAIN } ResponseCmndStateText(Settings.flag5.mqtt_state_retain); // CMND_STATERETAIN } /*********************************************************************************************\ * TLS private key and certificate - store into Flash \*********************************************************************************************/ #if defined(USE_MQTT_TLS) && defined(USE_MQTT_AWS_IOT) #ifdef ESP32 static uint8_t * tls_spi_start = nullptr; const static size_t tls_spi_len = 0x0400; // 1kb blocs const static size_t tls_block_offset = 0x0000; // don't need offset in FS #else // const static uint16_t tls_spi_start_sector = EEPROM_LOCATION + 4; // 0xXXFF // const static uint8_t* tls_spi_start = (uint8_t*) ((tls_spi_start_sector * SPI_FLASH_SEC_SIZE) + 0x40200000); // 0x40XFF000 const static uint16_t tls_spi_start_sector = 0xFF; // Force last bank of first MB const static uint8_t* tls_spi_start = (uint8_t*) 0x402FF000; // 0x402FF000 const static size_t tls_spi_len = 0x1000; // 4kb blocs const static size_t tls_block_offset = 0x0400; #endif const static size_t tls_block_len = 0x0400; // 1kb const static size_t tls_obj_store_offset = tls_block_offset + sizeof(tls_dir_t); inline void TlsEraseBuffer(uint8_t *buffer) { memset(buffer + tls_block_offset, 0xFF, tls_block_len); } // static data structures for Private Key and Certificate, only the pointer // to binary data will change to a region in SPI Flash static br_ec_private_key EC = { 23, nullptr, 0 }; static br_x509_certificate CHAIN[] = { { nullptr, 0 } }; // load a copy of the tls_dir from flash into ram // and calculate the appropriate data structures for AWS_IoT_Private_Key and AWS_IoT_Client_Certificate void loadTlsDir(void) { #ifdef ESP32 // We load the file in RAM and use it as if it was in Flash. The buffer is never deallocated once we loaded TLS keys AWS_IoT_Private_Key = nullptr; AWS_IoT_Client_Certificate = nullptr; if (TfsFileExists(TASM_FILE_TLSKEY)) { if (tls_spi_start == nullptr){ tls_spi_start = (uint8_t*) malloc(tls_block_len); if (tls_spi_start == nullptr) { return; } } TfsLoadFile(TASM_FILE_TLSKEY, tls_spi_start, tls_block_len); } else { return; // file does not exist, do nothing } #endif memcpy_P(&tls_dir, tls_spi_start + tls_block_offset, sizeof(tls_dir)); // calculate the addresses for Key and Cert in Flash if ((TLS_NAME_SKEY == tls_dir.entry[0].name) && (tls_dir.entry[0].len > 0)) { EC.x = (unsigned char *)(tls_spi_start + tls_obj_store_offset + tls_dir.entry[0].start); EC.xlen = tls_dir.entry[0].len; AWS_IoT_Private_Key = &EC; } else { AWS_IoT_Private_Key = nullptr; } if ((TLS_NAME_CRT == tls_dir.entry[1].name) && (tls_dir.entry[1].len > 0)) { CHAIN[0].data = (unsigned char *) (tls_spi_start + tls_obj_store_offset + tls_dir.entry[1].start); CHAIN[0].data_len = tls_dir.entry[1].len; AWS_IoT_Client_Certificate = CHAIN; } else { AWS_IoT_Client_Certificate = nullptr; } //Serial.printf("AWS_IoT_Private_Key = %x, AWS_IoT_Client_Certificate = %x\n", AWS_IoT_Private_Key, AWS_IoT_Client_Certificate); } const char ALLOCATE_ERROR[] PROGMEM = "TLSKey " D_JSON_ERROR ": cannot allocate buffer."; void CmndTlsKey(void) { #ifdef DEBUG_DUMP_TLS if (0 == XdrvMailbox.index){ CmndTlsDump(); } #endif // DEBUG_DUMP_TLS if ((XdrvMailbox.index >= 1) && (XdrvMailbox.index <= 2)) { tls_dir_t *tls_dir_write; if (XdrvMailbox.data_len > 0) { // write new value // first copy SPI buffer into ram uint8_t *spi_buffer = (uint8_t*) malloc(tls_spi_len); if (!spi_buffer) { AddLog(LOG_LEVEL_ERROR, ALLOCATE_ERROR); return; } if (tls_spi_start != nullptr) { // safeguard for ESP32 memcpy_P(spi_buffer, tls_spi_start, tls_spi_len); } else { memset(spi_buffer, 0, tls_spi_len); // safeguard for ESP32, removed by compiler for ESP8266 } // remove any white space from the base64 RemoveSpace(XdrvMailbox.data); // allocate buffer for decoded base64 uint32_t bin_len = decode_base64_length((unsigned char*)XdrvMailbox.data); uint8_t *bin_buf = nullptr; if (bin_len > 0) { bin_buf = (uint8_t*) malloc(bin_len + 4); if (!bin_buf) { AddLog(LOG_LEVEL_ERROR, ALLOCATE_ERROR); free(spi_buffer); return; } } // decode base64 if (bin_len > 0) { decode_base64((unsigned char*)XdrvMailbox.data, bin_buf); } // address of writable tls_dir in buffer tls_dir_write = (tls_dir_t*) (spi_buffer + tls_block_offset); bool save_file = false; // for ESP32, do we need to write file if (1 == XdrvMailbox.index) { // Try to write Private key // Start by erasing all #ifdef ESP32 if (TfsFileExists(TASM_FILE_TLSKEY)) { TfsDeleteFile(TASM_FILE_TLSKEY); // delete file } #else TlsEraseBuffer(spi_buffer); // Erase any previously stored data #endif if (bin_len > 0) { if (bin_len != 32) { // no private key was previously stored, abort AddLog(LOG_LEVEL_INFO, PSTR("TLSKey: Certificate must be 32 bytes: %d."), bin_len); free(spi_buffer); free(bin_buf); return; } tls_entry_t *entry = &tls_dir_write->entry[0]; entry->name = TLS_NAME_SKEY; entry->start = 0; entry->len = bin_len; memcpy(spi_buffer + tls_obj_store_offset + entry->start, bin_buf, entry->len); save_file = true; } else { // if lenght is zero, simply erase this SPI flash area } } else if (2 == XdrvMailbox.index) { // Try to write Certificate if (TLS_NAME_SKEY != tls_dir.entry[0].name) { // no private key was previously stored, abort AddLog(LOG_LEVEL_INFO, PSTR("TLSKey: cannot store Cert if no Key previously stored.")); free(spi_buffer); free(bin_buf); return; } if (bin_len <= 256) { // Certificate lenght too short AddLog(LOG_LEVEL_INFO, PSTR("TLSKey: Certificate length too short: %d."), bin_len); free(spi_buffer); free(bin_buf); return; } tls_entry_t *entry = &tls_dir_write->entry[1]; entry->name = TLS_NAME_CRT; entry->start = (tls_dir_write->entry[0].start + tls_dir_write->entry[0].len + 3) & ~0x03; // align to 4 bytes boundary entry->len = bin_len; memcpy(spi_buffer + tls_obj_store_offset + entry->start, bin_buf, entry->len); save_file = true; } #ifdef ESP32 if (save_file) { TfsSaveFile(TASM_FILE_TLSKEY, spi_buffer, tls_spi_len); } #else if (ESP.flashEraseSector(tls_spi_start_sector)) { ESP.flashWrite(tls_spi_start_sector * SPI_FLASH_SEC_SIZE, (uint32_t*) spi_buffer, SPI_FLASH_SEC_SIZE); } #endif free(spi_buffer); free(bin_buf); } loadTlsDir(); // reload into memory any potential change Response_P(PSTR("{\"%s1\":%d,\"%s2\":%d}"), XdrvMailbox.command, AWS_IoT_Private_Key ? tls_dir.entry[0].len : -1, XdrvMailbox.command, AWS_IoT_Client_Certificate ? tls_dir.entry[1].len : -1); } } #ifdef DEBUG_DUMP_TLS // Dump TLS Flash data - don't activate in production to protect your private keys uint32_t bswap32(uint32_t x) { return ((x << 24) & 0xff000000 ) | ((x << 8) & 0x00ff0000 ) | ((x >> 8) & 0x0000ff00 ) | ((x >> 24) & 0x000000ff ); } void CmndTlsDump(void) { if (tls_spi_start == nullptr) { return; } // safeguard for ESP32, removed by compiler for ESP8266 uint32_t start = (uint32_t)tls_spi_start + tls_block_offset; uint32_t end = start + tls_block_len -1; for (uint32_t pos = start; pos < end; pos += 0x10) { uint32_t* values = (uint32_t*)(pos); Serial.printf_P(PSTR("%08x: %08x %08x %08x %08x\n"), pos, bswap32(values[0]), bswap32(values[1]), bswap32(values[2]), bswap32(values[3])); } } #endif // DEBUG_DUMP_TLS #endif /*********************************************************************************************\ * Presentation \*********************************************************************************************/ #ifdef USE_WEBSERVER #define WEB_HANDLE_MQTT "mq" const char S_CONFIGURE_MQTT[] PROGMEM = D_CONFIGURE_MQTT; const char HTTP_BTN_MENU_MQTT[] PROGMEM = "

"; const char HTTP_FORM_MQTT1[] PROGMEM = "
 " D_MQTT_PARAMETERS " " "
" "

" D_HOST " (" MQTT_HOST ")

" "

" D_PORT " (" STR(MQTT_PORT) ")

" #ifdef USE_MQTT_TLS "


" #endif // USE_MQTT_TLS "

" D_CLIENT " (%s)

"; const char HTTP_FORM_MQTT2[] PROGMEM = "

" D_USER " (" MQTT_USER ")

" "


" "

" D_TOPIC " = %%topic%% (%s)

" "

" D_FULL_TOPIC " (%s)

"; void HandleMqttConfiguration(void) { if (!HttpCheckPriviledgedAccess()) { return; } AddLog(LOG_LEVEL_DEBUG, PSTR(D_LOG_HTTP D_CONFIGURE_MQTT)); if (Webserver->hasArg(F("save"))) { MqttSaveSettings(); WebRestart(1); return; } char str[TOPSZ]; WSContentStart_P(PSTR(D_CONFIGURE_MQTT)); WSContentSendStyle(); WSContentSend_P(HTTP_FORM_MQTT1, SettingsText(SET_MQTT_HOST), Settings.mqtt_port, #ifdef USE_MQTT_TLS Mqtt.mqtt_tls ? PSTR(" checked") : "", // SetOption102 - Enable MQTT TLS #endif // USE_MQTT_TLS Format(str, PSTR(MQTT_CLIENT_ID), sizeof(str)), PSTR(MQTT_CLIENT_ID), SettingsText(SET_MQTT_CLIENT)); WSContentSend_P(HTTP_FORM_MQTT2, (!strlen(SettingsText(SET_MQTT_USER))) ? "0" : SettingsText(SET_MQTT_USER), Format(str, PSTR(MQTT_TOPIC), sizeof(str)), PSTR(MQTT_TOPIC), SettingsText(SET_MQTT_TOPIC), PSTR(MQTT_FULLTOPIC), PSTR(MQTT_FULLTOPIC), SettingsText(SET_MQTT_FULLTOPIC)); WSContentSend_P(HTTP_FORM_END); WSContentSpaceButton(BUTTON_CONFIGURATION); WSContentStop(); } void MqttSaveSettings(void) { String cmnd = F(D_CMND_BACKLOG "0 "); cmnd += AddWebCommand(PSTR(D_CMND_MQTTHOST), PSTR("mh"), PSTR("1")); cmnd += AddWebCommand(PSTR(D_CMND_MQTTPORT), PSTR("ml"), PSTR("1")); cmnd += AddWebCommand(PSTR(D_CMND_MQTTCLIENT), PSTR("mc"), PSTR("1")); cmnd += AddWebCommand(PSTR(D_CMND_MQTTUSER), PSTR("mu"), PSTR("1")); cmnd += AddWebCommand(PSTR(D_CMND_MQTTPASSWORD "2"), PSTR("mp"), PSTR("\"")); cmnd += AddWebCommand(PSTR(D_CMND_TOPIC), PSTR("mt"), PSTR("1")); cmnd += AddWebCommand(PSTR(D_CMND_FULLTOPIC), PSTR("mf"), PSTR("1")); #ifdef USE_MQTT_TLS cmnd += F(";" D_CMND_SO "102 "); cmnd += Webserver->hasArg(F("b3")); // SetOption102 - Enable MQTT TLS #endif ExecuteWebCommand((char*)cmnd.c_str()); } #endif // USE_WEBSERVER /*********************************************************************************************\ * Interface \*********************************************************************************************/ bool Xdrv02(uint8_t function) { bool result = false; if (Settings.flag.mqtt_enabled) { // SetOption3 - Enable MQTT switch (function) { case FUNC_EVERY_50_MSECOND: // https://github.com/knolleary/pubsubclient/issues/556 MqttClient.loop(); break; #ifdef USE_WEBSERVER case FUNC_WEB_ADD_BUTTON: WSContentSend_P(HTTP_BTN_MENU_MQTT); break; case FUNC_WEB_ADD_HANDLER: WebServer_on(PSTR("/" WEB_HANDLE_MQTT), HandleMqttConfiguration); break; #endif // USE_WEBSERVER case FUNC_COMMAND: result = DecodeCommand(kMqttCommands, MqttCommand, kMqttSynonyms); break; case FUNC_PRE_INIT: MqttInit(); break; } } return result; }