/* tasmota_template.h - template settings for Tasmota Copyright (C) 2021 Theo Arends This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . */ #ifndef _TASMOTA_TEMPLATE_H_ #define _TASMOTA_TEMPLATE_H_ // User selectable GPIO functionality // ATTENTION: Only add at the end of this list just before GPIO_SENSOR_END // Then add the same name(s) in a nice location in array kGpioNiceList enum UserSelectablePins { GPIO_NONE, // Not used GPIO_KEY1, GPIO_KEY1_NP, GPIO_KEY1_INV, GPIO_KEY1_INV_NP, // 4 x Button GPIO_SWT1, GPIO_SWT1_NP, // 8 x User connected external switches GPIO_REL1, GPIO_REL1_INV, // 8 x Relays GPIO_LED1, GPIO_LED1_INV, // 4 x Leds GPIO_CNTR1, GPIO_CNTR1_NP, // 4 x Counter GPIO_PWM1, GPIO_PWM1_INV, // 5 x PWM GPIO_BUZZER, GPIO_BUZZER_INV, // Buzzer GPIO_LEDLNK, GPIO_LEDLNK_INV, // Link led GPIO_I2C_SCL, GPIO_I2C_SDA, // Software I2C GPIO_SPI_MISO, GPIO_SPI_MOSI, GPIO_SPI_CLK, GPIO_SPI_CS, GPIO_SPI_DC, // Hardware SPI GPIO_SSPI_MISO, GPIO_SSPI_MOSI, GPIO_SSPI_SCLK, GPIO_SSPI_CS, GPIO_SSPI_DC, // Software SPI GPIO_BACKLIGHT, // Display backlight control GPIO_OLED_RESET, // OLED Display Reset GPIO_IRSEND, GPIO_IRRECV, // IR interface GPIO_RFSEND, GPIO_RFRECV, // RF interface GPIO_DHT11, GPIO_DHT22, GPIO_SI7021, GPIO_DHT11_OUT, // DHT11, DHT21, DHT22, AM2301, AM2302, AM2321 GPIO_DSB, GPIO_DSB_OUT, // DS18B20 or DS18S20 GPIO_WS2812, // WS2812 Led string GPIO_MHZ_TXD, GPIO_MHZ_RXD, // MH-Z19 Serial interface GPIO_PZEM0XX_TX, GPIO_PZEM004_RX, GPIO_PZEM016_RX, GPIO_PZEM017_RX, // PZEM Serial Modbus interface GPIO_SAIR_TX, GPIO_SAIR_RX, // SenseAir Serial interface GPIO_PMS5003_TX, GPIO_PMS5003_RX, // Plantower PMS5003 Serial interface GPIO_SDS0X1_TX, GPIO_SDS0X1_RX, // Nova Fitness SDS011 Serial interface GPIO_SBR_TX, GPIO_SBR_RX, // Serial Bridge Serial interface GPIO_SR04_TRIG, GPIO_SR04_ECHO, // SR04 interface GPIO_SDM120_TX, GPIO_SDM120_RX, // SDM120 Serial interface GPIO_SDM630_TX, GPIO_SDM630_RX, // SDM630 Serial interface GPIO_TM16CLK, GPIO_TM16DIO, GPIO_TM16STB, // TM1638 interface GPIO_MP3_DFR562, // RB-DFR-562, DFPlayer Mini MP3 Player GPIO_HX711_SCK, GPIO_HX711_DAT, // HX711 Load Cell interface GPIO_TX2X_TXD_BLACK, // TX20/TX23 Transmission Pin GPIO_TUYA_TX, GPIO_TUYA_RX, // Tuya Serial interface GPIO_MGC3130_XFER, GPIO_MGC3130_RESET, // MGC3130 interface GPIO_RF_SENSOR, // Rf receiver with sensor decoding GPIO_AZ_TXD, GPIO_AZ_RXD, // AZ-Instrument 7798 Serial interface GPIO_MAX31855CS, GPIO_MAX31855CLK, GPIO_MAX31855DO, // MAX31855 Serial interface GPIO_NRG_SEL, GPIO_NRG_SEL_INV, GPIO_NRG_CF1, GPIO_HLW_CF, GPIO_HJL_CF, // HLW8012/HJL-01/BL0937 energy monitoring GPIO_MCP39F5_TX, GPIO_MCP39F5_RX, GPIO_MCP39F5_RST, // MCP39F501 Energy monitoring (Shelly2) GPIO_PN532_TXD, GPIO_PN532_RXD, // PN532 NFC Serial interface GPIO_SM16716_CLK, GPIO_SM16716_DAT, GPIO_SM16716_SEL, // SM16716 SELECT GPIO_DI, GPIO_DCKI, // my92x1 PWM controller GPIO_CSE7766_TX, GPIO_CSE7766_RX, // CSE7766 Serial interface (S31 and Pow R2) GPIO_ARIRFRCV, GPIO_ARIRFSEL, // Arilux RF Receive input GPIO_TXD, GPIO_RXD, // Serial interface GPIO_ROT1A, GPIO_ROT1B, // Rotary switch GPIO_ADC_JOY, // Analog joystick GPIO_SSPI_MAX31865_CS1, // MAX31865 Chip Select GPIO_HRE_CLOCK, GPIO_HRE_DATA, // HR-E Water Meter GPIO_ADE7953_IRQ, // ADE7953 IRQ GPIO_SOLAXX1_TX, GPIO_SOLAXX1_RX, // Solax Inverter Serial interface GPIO_ZIGBEE_TX, GPIO_ZIGBEE_RX, // Zigbee Serial interface GPIO_RDM6300_RX, // RDM6300 RX GPIO_IBEACON_TX, GPIO_IBEACON_RX, // HM17 IBEACON Serial interface GPIO_A4988_DIR, GPIO_A4988_STP, GPIO_A4988_ENA, GPIO_A4988_MS1, // A4988 interface GPIO_OUTPUT_HI, GPIO_OUTPUT_LO, // Fixed output state GPIO_DDS2382_TX, GPIO_DDS2382_RX, // DDS2382 Serial interface GPIO_DDSU666_TX, GPIO_DDSU666_RX, // DDSU666 Serial interface GPIO_SM2135_CLK, GPIO_SM2135_DAT, // SM2135 PWM controller GPIO_DEEPSLEEP, // Kill switch for deepsleep GPIO_EXS_ENABLE, // EXS MCU Enable GPIO_TASMOTACLIENT_TXD, GPIO_TASMOTACLIENT_RXD, // Client Serial interface GPIO_TASMOTACLIENT_RST, GPIO_TASMOTACLIENT_RST_INV, // Client Reset GPIO_HPMA_RX, GPIO_HPMA_TX, // Honeywell HPMA115S0 Serial interface GPIO_GPS_RX, GPIO_GPS_TX, // GPS Serial interface GPIO_HM10_RX, GPIO_HM10_TX, // HM10-BLE-Mijia-bridge Serial interface GPIO_LE01MR_RX, GPIO_LE01MR_TX, // F&F LE-01MR energy meter GPIO_CC1101_GDO0, GPIO_CC1101_GDO2, // CC1101 Serial interface GPIO_HRXL_RX, // Data from MaxBotix HRXL sonar range sensor GPIO_ELECTRIQ_MOODL_TX, // ElectriQ iQ-wifiMOODL Serial TX GPIO_AS3935, // Franklin Lightning Sensor GPIO_ADC_INPUT, // Analog input GPIO_ADC_TEMP, // Analog Thermistor GPIO_ADC_LIGHT, // Analog Light sensor GPIO_ADC_BUTTON, GPIO_ADC_BUTTON_INV, // Analog Button GPIO_ADC_RANGE, // Analog Range GPIO_ADC_CT_POWER, // ANalog Current #ifdef ESP32 GPIO_WEBCAM_PWDN, GPIO_WEBCAM_RESET, GPIO_WEBCAM_XCLK, // Webcam GPIO_WEBCAM_SIOD, GPIO_WEBCAM_SIOC, // Webcam I2C GPIO_WEBCAM_DATA, GPIO_WEBCAM_VSYNC, GPIO_WEBCAM_HREF, GPIO_WEBCAM_PCLK, GPIO_WEBCAM_PSCLK, GPIO_WEBCAM_HSD, GPIO_WEBCAM_PSRCS, #endif GPIO_BOILER_OT_RX, GPIO_BOILER_OT_TX, // OpenTherm Boiler TX pin GPIO_WINDMETER_SPEED, // WindMeter speed counter pin GPIO_KEY1_TC, // Touch pin as button GPIO_BL0940_RX, // BL0940 serial interface GPIO_TCP_TX, GPIO_TCP_RX, // TCP to serial bridge #ifdef ESP32 GPIO_ETH_PHY_POWER, GPIO_ETH_PHY_MDC, GPIO_ETH_PHY_MDIO, // Ethernet #endif GPIO_TELEINFO_RX, // Teleinfo telemetry data receive pin GPIO_TELEINFO_ENABLE, // Teleinfo Enable Receive Pin GPIO_LMT01, // LMT01 input counting pin GPIO_IEM3000_TX, GPIO_IEM3000_RX, // IEM3000 Serial interface GPIO_ZIGBEE_RST, // Zigbee reset GPIO_DYP_RX, GPIO_MIEL_HVAC_TX, GPIO_MIEL_HVAC_RX, // Mitsubishi Electric HVAC GPIO_WE517_TX, GPIO_WE517_RX, // ORNO WE517 Serial interface GPIO_AS608_TX, GPIO_AS608_RX, // Serial interface AS608 / R503 GPIO_SHELLY_DIMMER_BOOT0, GPIO_SHELLY_DIMMER_RST_INV, GPIO_RC522_RST, // RC522 reset GPIO_P9813_CLK, GPIO_P9813_DAT, // P9813 Clock and Data GPIO_OPTION_A, // Specific device options to be served in code GPIO_FTC532, // FTC532 touch ctrlr serial input GPIO_RC522_CS, GPIO_NRF24_CS, GPIO_NRF24_DC, GPIO_ILI9341_CS, GPIO_ILI9341_DC, GPIO_ILI9488_CS, GPIO_EPAPER29_CS, GPIO_EPAPER42_CS, GPIO_SSD1351_CS, GPIO_RA8876_CS, GPIO_ST7789_CS, GPIO_ST7789_DC, GPIO_SSD1331_CS, GPIO_SSD1331_DC, GPIO_SDCARD_CS, GPIO_ROT1A_NP, GPIO_ROT1B_NP, // Rotary switch GPIO_ADC_PH, // Analog PH Sensor GPIO_BS814_CLK, GPIO_BS814_DAT, // Holtek BS814A2 touch ctrlr GPIO_WIEGAND_D0, GPIO_WIEGAND_D1, // Wiegand Data lines GPIO_NEOPOOL_TX, GPIO_NEOPOOL_RX, // Sugar Valley RS485 interface GPIO_SENSOR_END }; enum ProgramSelectablePins { GPIO_FIX_START = 2046, GPIO_USER, // User configurable needs to be 2047 GPIO_MAX }; #define MAX_OPTIONS_A 2 // Increase if more bits are used from GpioOptionABits typedef union { // Restricted by MISRA-C Rule 18.4 but so useful... uint32_t data; // Allow bit manipulation using SetOption struct { // GPIO Option_A1 .. Option_A32 uint32_t pwm1_input : 1; // bit 0 (v9.2.0.1) - Option_A1 - (Light) Change PWM1 to input on power off and no fade running (1) uint32_t spare01 : 1; // bit 1 uint32_t spare02 : 1; // bit 2 uint32_t spare03 : 1; // bit 3 uint32_t spare04 : 1; // bit 4 uint32_t spare05 : 1; // bit 5 uint32_t spare06 : 1; // bit 6 uint32_t spare07 : 1; // bit 7 uint32_t spare08 : 1; // bit 8 uint32_t spare09 : 1; // bit 9 uint32_t spare10 : 1; // bit 10 uint32_t spare11 : 1; // bit 11 uint32_t spare12 : 1; // bit 12 uint32_t spare13 : 1; // bit 13 uint32_t spare14 : 1; // bit 14 uint32_t spare15 : 1; // bit 15 uint32_t spare16 : 1; // bit 16 uint32_t spare17 : 1; // bit 17 uint32_t spare18 : 1; // bit 18 uint32_t spare19 : 1; // bit 19 uint32_t spare20 : 1; // bit 20 uint32_t spare21 : 1; // bit 21 uint32_t spare22 : 1; // bit 22 uint32_t spare23 : 1; // bit 23 uint32_t spare24 : 1; // bit 24 uint32_t spare25 : 1; // bit 25 uint32_t spare26 : 1; // bit 26 uint32_t spare27 : 1; // bit 27 uint32_t spare28 : 1; // bit 28 uint32_t spare29 : 1; // bit 29 uint32_t spare30 : 1; // bit 30 uint32_t spare31 : 1; // bit 31 }; } GpioOptionABits; // Text in webpage Module Parameters and commands GPIOS and GPIO const char kSensorNames[] PROGMEM = D_SENSOR_NONE "|" D_SENSOR_BUTTON "|" D_SENSOR_BUTTON "_n|" D_SENSOR_BUTTON "_i|" D_SENSOR_BUTTON "_in|" D_SENSOR_SWITCH "|" D_SENSOR_SWITCH "_n|" D_SENSOR_RELAY "|" D_SENSOR_RELAY "_i|" D_SENSOR_LED "|" D_SENSOR_LED "_i|" D_SENSOR_COUNTER "|" D_SENSOR_COUNTER "_n|" D_SENSOR_PWM "|" D_SENSOR_PWM "_i|" D_SENSOR_BUZZER "|" D_SENSOR_BUZZER "_i|" D_SENSOR_LED_LINK "|" D_SENSOR_LED_LINK "_i|" D_SENSOR_I2C_SCL "|" D_SENSOR_I2C_SDA "|" D_SENSOR_SPI_MISO "|" D_SENSOR_SPI_MOSI "|" D_SENSOR_SPI_CLK "|" D_SENSOR_SPI_CS "|" D_SENSOR_SPI_DC "|" D_SENSOR_SSPI_MISO "|" D_SENSOR_SSPI_MOSI "|" D_SENSOR_SSPI_SCLK "|" D_SENSOR_SSPI_CS "|" D_SENSOR_SSPI_DC "|" D_SENSOR_BACKLIGHT "|" D_SENSOR_OLED_RESET "|" D_SENSOR_IRSEND "|" D_SENSOR_IRRECV "|" D_SENSOR_RFSEND "|" D_SENSOR_RFRECV "|" D_SENSOR_DHT11 "|" D_SENSOR_AM2301 "|" D_SENSOR_SI7021 "|" D_SENSOR_DHT11 "_o|" D_SENSOR_DS18X20 "|" D_SENSOR_DS18X20 "_o|" D_SENSOR_WS2812 "|" D_SENSOR_MHZ_TX "|" D_SENSOR_MHZ_RX "|" D_SENSOR_PZEM0XX_TX "|" D_SENSOR_PZEM004_RX "|" D_SENSOR_PZEM016_RX "|" D_SENSOR_PZEM017_RX "|" D_SENSOR_SAIR_TX "|" D_SENSOR_SAIR_RX "|" D_SENSOR_PMS5003_TX "|" D_SENSOR_PMS5003_RX "|" D_SENSOR_SDS0X1_TX "|" D_SENSOR_SDS0X1_RX "|" D_SENSOR_SBR_TX "|" D_SENSOR_SBR_RX "|" D_SENSOR_SR04_TRIG "|" D_SENSOR_SR04_ECHO "|" D_SENSOR_SDM120_TX "|" D_SENSOR_SDM120_RX "|" D_SENSOR_SDM630_TX "|" D_SENSOR_SDM630_RX "|" D_SENSOR_TM1638_CLK "|" D_SENSOR_TM1638_DIO "|" D_SENSOR_TM1638_STB "|" D_SENSOR_DFR562 "|" D_SENSOR_HX711_SCK "|" D_SENSOR_HX711_DAT "|" D_SENSOR_TX2X_TX "|" D_SENSOR_TUYA_TX "|" D_SENSOR_TUYA_RX "|" D_SENSOR_MGC3130_XFER "|" D_SENSOR_MGC3130_RESET "|" D_SENSOR_RF_SENSOR "|" D_SENSOR_AZ_TX "|" D_SENSOR_AZ_RX "|" D_SENSOR_MAX31855_CS "|" D_SENSOR_MAX31855_CLK "|" D_SENSOR_MAX31855_DO "|" D_SENSOR_NRG_SEL "|" D_SENSOR_NRG_SEL "_i|" D_SENSOR_NRG_CF1 "|" D_SENSOR_HLW_CF "|" D_SENSOR_HJL_CF "|" D_SENSOR_MCP39F5_TX "|" D_SENSOR_MCP39F5_RX "|" D_SENSOR_MCP39F5_RST "|" D_SENSOR_PN532_TX "|" D_SENSOR_PN532_RX "|" D_SENSOR_SM16716_CLK "|" D_SENSOR_SM16716_DAT "|" D_SENSOR_SM16716_POWER "|" D_SENSOR_MY92X1_DI "|" D_SENSOR_MY92X1_DCKI "|" D_SENSOR_CSE7766_TX "|" D_SENSOR_CSE7766_RX "|" D_SENSOR_ARIRFRCV "|" D_SENSOR_ARIRFSEL "|" D_SENSOR_TXD "|" D_SENSOR_RXD "|" D_SENSOR_ROTARY " A|" D_SENSOR_ROTARY " B|" D_SENSOR_ADC_JOYSTICK "|" D_SENSOR_MAX31865_CS "|" D_SENSOR_HRE_CLOCK "|" D_SENSOR_HRE_DATA "|" D_SENSOR_ADE7953_IRQ "|" D_SENSOR_SOLAXX1_TX "|" D_SENSOR_SOLAXX1_RX "|" D_SENSOR_ZIGBEE_TXD "|" D_SENSOR_ZIGBEE_RXD "|" D_SENSOR_RDM6300_RX "|" D_SENSOR_IBEACON_TX "|" D_SENSOR_IBEACON_RX "|" D_SENSOR_A4988_DIR "|" D_SENSOR_A4988_STP "|" D_SENSOR_A4988_ENA "|" D_SENSOR_A4988_MS1 "|" D_SENSOR_OUTPUT_HI "|" D_SENSOR_OUTPUT_LO "|" D_SENSOR_DDS2382_TX "|" D_SENSOR_DDS2382_RX "|" D_SENSOR_DDSU666_TX "|" D_SENSOR_DDSU666_RX "|" D_SENSOR_SM2135_CLK "|" D_SENSOR_SM2135_DAT "|" D_SENSOR_DEEPSLEEP "|" D_SENSOR_EXS_ENABLE "|" D_SENSOR_CLIENT_TX "|" D_SENSOR_CLIENT_RX "|" D_SENSOR_CLIENT_RESET "|" D_SENSOR_CLIENT_RESET "_i|" D_SENSOR_HPMA_RX "|" D_SENSOR_HPMA_TX "|" D_SENSOR_GPS_RX "|" D_SENSOR_GPS_TX "|" D_SENSOR_HM10_RX "|" D_SENSOR_HM10_TX "|" D_SENSOR_LE01MR_RX "|" D_SENSOR_LE01MR_TX "|" D_SENSOR_CC1101_GDO0 "|" D_SENSOR_CC1101_GDO2 "|" D_SENSOR_HRXL_RX "|" D_SENSOR_ELECTRIQ_MOODL "|" D_SENSOR_AS3935 "|" D_SENSOR_ADC_INPUT "|" D_SENSOR_ADC_TEMP "|" D_SENSOR_ADC_LIGHT "|" D_SENSOR_ADC_BUTTON "|" D_SENSOR_ADC_BUTTON "_i|" D_SENSOR_ADC_RANGE "|" D_SENSOR_ADC_CT_POWER "|" #ifdef ESP32 D_GPIO_WEBCAM_PWDN "|" D_GPIO_WEBCAM_RESET "|" D_GPIO_WEBCAM_XCLK "|" D_GPIO_WEBCAM_SIOD "|" D_GPIO_WEBCAM_SIOC "|" D_GPIO_WEBCAM_DATA "|" D_GPIO_WEBCAM_VSYNC "|" D_GPIO_WEBCAM_HREF "|" D_GPIO_WEBCAM_PCLK "|" D_GPIO_WEBCAM_PSCLK "|" D_GPIO_WEBCAM_HSD "|" D_GPIO_WEBCAM_PSRCS "|" #endif D_SENSOR_BOILER_OT_RX "|" D_SENSOR_BOILER_OT_TX "|" D_SENSOR_WINDMETER_SPEED "|" D_SENSOR_BUTTON "_tc|" D_SENSOR_BL0940_RX "|" D_SENSOR_TCP_TXD "|" D_SENSOR_TCP_RXD "|" #ifdef ESP32 D_SENSOR_ETH_PHY_POWER "|" D_SENSOR_ETH_PHY_MDC "|" D_SENSOR_ETH_PHY_MDIO "|" #endif D_SENSOR_TELEINFO_RX "|" D_SENSOR_TELEINFO_ENABLE "|" D_SENSOR_LMT01_PULSE "|" D_SENSOR_IEM3000_TX "|" D_SENSOR_IEM3000_RX "|" D_SENSOR_ZIGBEE_RST "|" D_SENSOR_DYP_RX "|" D_SENSOR_MIEL_HVAC_TX "|" D_SENSOR_MIEL_HVAC_RX "|" D_SENSOR_WE517_TX "|" D_SENSOR_WE517_RX "|" D_SENSOR_AS608_TX "|" D_SENSOR_AS608_RX "|" D_SENSOR_SHELLY_DIMMER_BOOT0 "|" D_SENSOR_SHELLY_DIMMER_RST_INV "|" D_SENSOR_RC522_RST "|" D_SENSOR_P9813_CLK "|" D_SENSOR_P9813_DAT "|" D_SENSOR_OPTION " A|" D_SENSOR_FTC532 "|" D_SENSOR_RC522_CS "|" D_SENSOR_NRF24_CS "|" D_SENSOR_NRF24_DC "|" D_SENSOR_ILI9341_CS "|" D_SENSOR_ILI9341_DC "|" D_SENSOR_ILI9488_CS "|" D_SENSOR_EPAPER29_CS "|" D_SENSOR_EPAPER42_CS "|" D_SENSOR_SSD1351_CS "|" D_SENSOR_RA8876_CS "|" D_SENSOR_ST7789_CS "|" D_SENSOR_ST7789_DC "|" D_SENSOR_SSD1331_CS "|" D_SENSOR_SSD1331_DC "|" D_SENSOR_SDCARD_CS "|" D_SENSOR_ROTARY " A_n|" D_SENSOR_ROTARY " B_n|" D_SENSOR_ADC_PH "|" D_SENSOR_BS814_CLK "|" D_SENSOR_BS814_DAT "|" D_SENSOR_WIEGAND_D0 "|" D_SENSOR_WIEGAND_D1 "|" D_SENSOR_NEOPOOL_TX "|" D_SENSOR_NEOPOOL_RX "|" ; const char kSensorNamesFixed[] PROGMEM = D_SENSOR_USER; #define MAX_MAX31865S 6 #define MAX_A4988_MSS 3 #define MAX_WEBCAM_DATA 8 #define MAX_WEBCAM_HSD 3 #define MAX_SM2135_DAT 6 const uint16_t kGpioNiceList[] PROGMEM = { GPIO_NONE, // Not used AGPIO(GPIO_OPTION_A) + MAX_OPTIONS_A, // Device specific options AGPIO(GPIO_KEY1) + MAX_KEYS, // Buttons AGPIO(GPIO_KEY1_NP) + MAX_KEYS, AGPIO(GPIO_KEY1_INV) + MAX_KEYS, AGPIO(GPIO_KEY1_INV_NP) + MAX_KEYS, AGPIO(GPIO_KEY1_TC) + MAX_KEYS, // Touch button AGPIO(GPIO_SWT1) + MAX_SWITCHES, // User connected external switches AGPIO(GPIO_SWT1_NP) + MAX_SWITCHES, #ifdef ROTARY_V1 AGPIO(GPIO_ROT1A) + MAX_ROTARIES, // Rotary A Pin AGPIO(GPIO_ROT1B) + MAX_ROTARIES, // Rotary B Pin AGPIO(GPIO_ROT1A_NP) + MAX_ROTARIES, // Rotary A Pin No Pullup AGPIO(GPIO_ROT1B_NP) + MAX_ROTARIES, // Rotary B Pin No Pullup #endif AGPIO(GPIO_REL1) + MAX_RELAYS, // Relays AGPIO(GPIO_REL1_INV) + MAX_RELAYS, AGPIO(GPIO_LED1) + MAX_LEDS, // Leds AGPIO(GPIO_LED1_INV) + MAX_LEDS, #ifdef USE_COUNTER AGPIO(GPIO_CNTR1) + MAX_COUNTERS, // Counters AGPIO(GPIO_CNTR1_NP) + MAX_COUNTERS, #endif AGPIO(GPIO_PWM1) + MAX_PWMS, // RGB Red or C Cold White AGPIO(GPIO_PWM1_INV) + MAX_PWMS, #ifdef USE_BUZZER AGPIO(GPIO_BUZZER), // Buzzer AGPIO(GPIO_BUZZER_INV), // Inverted buzzer #endif AGPIO(GPIO_LEDLNK), // Link led AGPIO(GPIO_LEDLNK_INV), // Inverted link led AGPIO(GPIO_OUTPUT_HI), // Fixed output high AGPIO(GPIO_OUTPUT_LO), // Fixed output low #ifdef USE_FTC532 AGPIO(GPIO_FTC532), // FTC532 touch input #endif #ifdef USE_BS814A2 AGPIO(GPIO_BS814_CLK), // Holtek BS814A2 touch ctrlr AGPIO(GPIO_BS814_DAT), #endif /*-------------------------------------------------------------------------------------------*\ * Protocol specifics \*-------------------------------------------------------------------------------------------*/ #ifdef USE_I2C AGPIO(GPIO_I2C_SCL), // I2C SCL AGPIO(GPIO_I2C_SDA), // I2C SDA #endif #ifdef USE_SPI AGPIO(GPIO_SPI_MISO), // SPI MISO AGPIO(GPIO_SPI_MOSI), // SPI MOSI AGPIO(GPIO_SPI_CLK), // SPI Clk AGPIO(GPIO_SPI_CS), // SPI Chip Select AGPIO(GPIO_SPI_DC), // SPI Data Direction #ifdef USE_NRF24 AGPIO(GPIO_NRF24_CS), AGPIO(GPIO_NRF24_DC), #endif #ifdef USE_RC522 AGPIO(GPIO_RC522_CS), // RC522 Rfid Chip Select AGPIO(GPIO_RC522_RST), // RC522 Rfid Reset #endif #ifdef USE_SDCARD AGPIO(GPIO_SDCARD_CS), #endif // USE_SDCARD #endif // USE_SPI AGPIO(GPIO_SSPI_MISO), // Software SPI Master Input Client Output AGPIO(GPIO_SSPI_MOSI), // Software SPI Master Output Client Input AGPIO(GPIO_SSPI_SCLK), // Software SPI Serial Clock AGPIO(GPIO_SSPI_CS), // Software SPI Chip Select AGPIO(GPIO_SSPI_DC), // Software SPI Data or Command #ifdef USE_DISPLAY #ifdef USE_DISPLAY_ILI9341 AGPIO(GPIO_ILI9341_CS), AGPIO(GPIO_ILI9341_DC), #endif // USE_DISPLAY_ILI9341 #ifdef USE_DISPLAY_ILI9488 AGPIO(GPIO_ILI9488_CS), #endif // USE_DISPLAY_ILI9488 #ifdef USE_DISPLAY_EPAPER_29 AGPIO(GPIO_EPAPER29_CS), #endif // USE_DISPLAY_EPAPER_29 #ifdef USE_DISPLAY_EPAPER_42 AGPIO(GPIO_EPAPER42_CS), #endif // USE_DISPLAY_EPAPER_42 #ifdef USE_DISPLAY_SSD1351 AGPIO(GPIO_SSD1351_CS), #endif // USE_DISPLAY_SSD1351 #ifdef USE_DISPLAY_RA8876 AGPIO(GPIO_RA8876_CS), #endif // USE_DISPLAY_RA8876 #ifdef USE_DISPLAY_ST7789 AGPIO(GPIO_ST7789_CS), AGPIO(GPIO_ST7789_DC), #endif // USE_DISPLAY_ST7789 #ifdef USE_DISPLAY_SSD1331 AGPIO(GPIO_SSD1331_CS), AGPIO(GPIO_SSD1331_DC), #endif // USE_DISPLAY_SSD1331 AGPIO(GPIO_BACKLIGHT), // Display backlight control AGPIO(GPIO_OLED_RESET), // OLED Display Reset #endif #ifdef USE_MAX31865 AGPIO(GPIO_SSPI_MAX31865_CS1) + MAX_MAX31865S, #endif AGPIO(GPIO_TXD), // Serial interface AGPIO(GPIO_RXD), // Serial interface /*-------------------------------------------------------------------------------------------*\ * Single wire sensors \*-------------------------------------------------------------------------------------------*/ #ifdef USE_DHT AGPIO(GPIO_DHT11), // DHT11 AGPIO(GPIO_DHT22), // DHT21, DHT22, AM2301, AM2302, AM2321 AGPIO(GPIO_SI7021), // iTead SI7021 AGPIO(GPIO_DHT11_OUT), // Pseudo Single wire DHT11, DHT21, DHT22, AM2301, AM2302, AM2321 #endif #ifdef USE_DS18x20 AGPIO(GPIO_DSB), // Single wire DS18B20 or DS18S20 AGPIO(GPIO_DSB_OUT), // Pseudo Single wire DS18B20 or DS18S20 #endif #ifdef USE_LMT01 AGPIO(GPIO_LMT01), // LMT01, count pulses on GPIO #endif /*-------------------------------------------------------------------------------------------*\ * Light \*-------------------------------------------------------------------------------------------*/ #ifdef USE_LIGHT #ifdef USE_WS2812 #if (USE_WS2812_HARDWARE == NEO_HW_P9813) AGPIO(GPIO_P9813_CLK), // P9813 CLOCK AGPIO(GPIO_P9813_DAT), // P9813 DATA #else AGPIO(GPIO_WS2812), // WS2812 Led string #endif // NEO_HW_P9813 #endif #ifdef USE_ARILUX_RF AGPIO(GPIO_ARIRFRCV), // AriLux RF Receive input AGPIO(GPIO_ARIRFSEL), // Arilux RF Receive input selected #endif #ifdef USE_MY92X1 AGPIO(GPIO_DI), // my92x1 PWM input AGPIO(GPIO_DCKI), // my92x1 CLK input #endif // USE_MY92X1 #ifdef USE_SM16716 AGPIO(GPIO_SM16716_CLK), // SM16716 CLOCK AGPIO(GPIO_SM16716_DAT), // SM16716 DATA AGPIO(GPIO_SM16716_SEL), // SM16716 SELECT #endif // USE_SM16716 #ifdef USE_SM2135 AGPIO(GPIO_SM2135_CLK), // SM2135 CLOCK AGPIO(GPIO_SM2135_DAT) + MAX_SM2135_DAT, // SM2135 DATA #endif // USE_SM2135 #ifdef USE_TUYA_MCU AGPIO(GPIO_TUYA_TX), // Tuya Serial interface AGPIO(GPIO_TUYA_RX), // Tuya Serial interface #endif #ifdef USE_EXS_DIMMER AGPIO(GPIO_EXS_ENABLE), // EXS MCU Enable #endif #ifdef USE_ELECTRIQ_MOODL AGPIO(GPIO_ELECTRIQ_MOODL_TX), #endif #ifdef USE_SHELLY_DIMMER AGPIO(GPIO_SHELLY_DIMMER_BOOT0), AGPIO(GPIO_SHELLY_DIMMER_RST_INV), #endif #endif // USE_LIGHT /*-------------------------------------------------------------------------------------------*\ * Transmission sensors \*-------------------------------------------------------------------------------------------*/ #if defined(USE_IR_REMOTE) || defined(USE_IR_REMOTE_FULL) AGPIO(GPIO_IRSEND), // IR remote #if defined(USE_IR_RECEIVE) || defined(USE_IR_REMOTE_FULL) AGPIO(GPIO_IRRECV), // IR receiver #endif #endif #ifdef USE_RC_SWITCH AGPIO(GPIO_RFSEND), // RF transmitter AGPIO(GPIO_RFRECV), // RF receiver #endif #ifdef USE_RF_SENSOR AGPIO(GPIO_RF_SENSOR), // Rf receiver with sensor decoding #endif #ifdef USE_SR04 AGPIO(GPIO_SR04_TRIG), // SR04 Tri/TXgger pin AGPIO(GPIO_SR04_ECHO), // SR04 Ech/RXo pin #endif #ifdef USE_TM1638 AGPIO(GPIO_TM16CLK), // TM1638 Clock AGPIO(GPIO_TM16DIO), // TM1638 Data I/O AGPIO(GPIO_TM16STB), // TM1638 Strobe #endif #ifdef USE_HX711 AGPIO(GPIO_HX711_SCK), // HX711 Load Cell clock AGPIO(GPIO_HX711_DAT), // HX711 Load Cell data #endif /*-------------------------------------------------------------------------------------------*\ * Energy sensors \*-------------------------------------------------------------------------------------------*/ #ifdef USE_ENERGY_SENSOR #ifdef USE_HLW8012 AGPIO(GPIO_NRG_SEL), // HLW8012/HLJ-01 Sel output (1 = Voltage) AGPIO(GPIO_NRG_SEL_INV), // HLW8012/HLJ-01 Sel output (0 = Voltage) AGPIO(GPIO_NRG_CF1), // HLW8012/HLJ-01 CF1 voltage / current AGPIO(GPIO_HLW_CF), // HLW8012 CF power AGPIO(GPIO_HJL_CF), // HJL-01/BL0937 CF power #endif #if defined(USE_I2C) && defined(USE_ADE7953) AGPIO(GPIO_ADE7953_IRQ), // ADE7953 IRQ #endif #ifdef USE_CSE7766 AGPIO(GPIO_CSE7766_TX), // CSE7766 Serial interface (S31 and Pow R2) AGPIO(GPIO_CSE7766_RX), // CSE7766 Serial interface (S31 and Pow R2) #endif #ifdef USE_MCP39F501 AGPIO(GPIO_MCP39F5_TX), // MCP39F501 Serial interface (Shelly2) AGPIO(GPIO_MCP39F5_RX), // MCP39F501 Serial interface (Shelly2) AGPIO(GPIO_MCP39F5_RST), // MCP39F501 Reset (Shelly2) #endif #if defined(USE_PZEM004T) || defined(USE_PZEM_AC) || defined(USE_PZEM_DC) AGPIO(GPIO_PZEM0XX_TX), // PZEM0XX Serial interface #endif #ifdef USE_PZEM004T AGPIO(GPIO_PZEM004_RX), // PZEM004T Serial interface #endif #ifdef USE_PZEM_AC AGPIO(GPIO_PZEM016_RX), // PZEM-014,016 Serial Modbus interface #endif #ifdef USE_PZEM_DC AGPIO(GPIO_PZEM017_RX), // PZEM-003,017 Serial Modbus interface #endif #ifdef USE_SDM120 AGPIO(GPIO_SDM120_TX), // SDM120 Serial interface AGPIO(GPIO_SDM120_RX), // SDM120 Serial interface #endif #ifdef USE_SDM630 AGPIO(GPIO_SDM630_TX), // SDM630 Serial interface AGPIO(GPIO_SDM630_RX), // SDM630 Serial interface #endif #ifdef USE_DDS2382 AGPIO(GPIO_DDS2382_TX), // DDS2382 Serial interface AGPIO(GPIO_DDS2382_RX), // DDS2382 Serial interface #endif #ifdef USE_DDSU666 AGPIO(GPIO_DDSU666_TX), // DDSU666 Serial interface AGPIO(GPIO_DDSU666_RX), // DDSU666 Serial interface #endif // USE_DDSU666 #ifdef USE_SOLAX_X1 AGPIO(GPIO_SOLAXX1_TX), // Solax Inverter tx pin AGPIO(GPIO_SOLAXX1_RX), // Solax Inverter rx pin #endif // USE_SOLAX_X1 #ifdef USE_LE01MR AGPIO(GPIO_LE01MR_TX), // F7F LE-01MR energy meter tx pin AGPIO(GPIO_LE01MR_RX), // F7F LE-01MR energy meter rx pin #endif // IFDEF:USE_LE01MR #ifdef USE_BL0940 AGPIO(GPIO_BL0940_RX), // BL0940 Serial interface #endif #ifdef USE_IEM3000 AGPIO(GPIO_IEM3000_TX), // IEM3000 Serial interface AGPIO(GPIO_IEM3000_RX), // IEM3000 Serial interface #endif #ifdef USE_WE517 AGPIO(GPIO_WE517_TX), // WE517 Serial interface AGPIO(GPIO_WE517_RX), // WE517 Serial interface #endif #endif // USE_ENERGY_SENSOR /*-------------------------------------------------------------------------------------------*\ * Serial sensors \*-------------------------------------------------------------------------------------------*/ #ifdef USE_SERIAL_BRIDGE AGPIO(GPIO_SBR_TX), // Serial Bridge Serial interface AGPIO(GPIO_SBR_RX), // Serial Bridge Serial interface #endif #ifdef USE_TCP_BRIDGE AGPIO(GPIO_TCP_TX), // TCP Serial bridge AGPIO(GPIO_TCP_RX), // TCP Serial bridge #endif #ifdef USE_ZIGBEE AGPIO(GPIO_ZIGBEE_TX), // Zigbee Serial interface AGPIO(GPIO_ZIGBEE_RX), // Zigbee Serial interface AGPIO(GPIO_ZIGBEE_RST), // Zigbee reset #endif #ifdef USE_MHZ19 AGPIO(GPIO_MHZ_TXD), // MH-Z19 Serial interface AGPIO(GPIO_MHZ_RXD), // MH-Z19 Serial interface #endif #ifdef USE_SENSEAIR AGPIO(GPIO_SAIR_TX), // SenseAir Serial interface AGPIO(GPIO_SAIR_RX), // SenseAir Serial interface #endif #ifdef USE_NOVA_SDS AGPIO(GPIO_SDS0X1_TX), // Nova Fitness SDS011 Serial interface AGPIO(GPIO_SDS0X1_RX), // Nova Fitness SDS011 Serial interface #endif #ifdef USE_HPMA AGPIO(GPIO_HPMA_TX), // Honeywell HPMA115S0 Serial interface AGPIO(GPIO_HPMA_RX), // Honeywell HPMA115S0 Serial interface #endif #ifdef USE_PMS5003 AGPIO(GPIO_PMS5003_TX), // Plantower PMS5003 Serial interface AGPIO(GPIO_PMS5003_RX), // Plantower PMS5003 Serial interface #endif #if defined(USE_TX20_WIND_SENSOR) || defined(USE_TX23_WIND_SENSOR) AGPIO(GPIO_TX2X_TXD_BLACK), // TX20/TX23 Transmission Pin #endif #ifdef USE_WINDMETER AGPIO(GPIO_WINDMETER_SPEED), #endif #ifdef USE_MP3_PLAYER AGPIO(GPIO_MP3_DFR562), // RB-DFR-562, DFPlayer Mini MP3 Player Serial interface #endif #ifdef USE_AZ7798 AGPIO(GPIO_AZ_TXD), // AZ-Instrument 7798 CO2 datalogger Serial interface AGPIO(GPIO_AZ_RXD), // AZ-Instrument 7798 CO2 datalogger Serial interface #endif #ifdef USE_PN532_HSU AGPIO(GPIO_PN532_TXD), // PN532 HSU Tx AGPIO(GPIO_PN532_RXD), // PN532 HSU Rx #endif #ifdef USE_TASMOTA_CLIENT AGPIO(GPIO_TASMOTACLIENT_TXD), // Tasmota Client TX AGPIO(GPIO_TASMOTACLIENT_RXD), // Tasmota Client RX AGPIO(GPIO_TASMOTACLIENT_RST), // Tasmota Client Reset AGPIO(GPIO_TASMOTACLIENT_RST_INV), // Tasmota Client Reset Inverted #endif #ifdef USE_RDM6300 AGPIO(GPIO_RDM6300_RX), #endif #ifdef USE_IBEACON AGPIO(GPIO_IBEACON_TX), AGPIO(GPIO_IBEACON_RX), #endif #ifdef USE_GPS AGPIO(GPIO_GPS_TX), // GPS serial interface AGPIO(GPIO_GPS_RX), // GPS serial interface #endif #ifdef USE_HM10 AGPIO(GPIO_HM10_TX), // GPS serial interface AGPIO(GPIO_HM10_RX), // GPS serial interface #endif #ifdef USE_OPENTHERM AGPIO(GPIO_BOILER_OT_TX), AGPIO(GPIO_BOILER_OT_RX), #endif #ifdef USE_AS608 AGPIO(GPIO_AS608_TX), AGPIO(GPIO_AS608_RX), #endif /*-------------------------------------------------------------------------------------------*\ * Other sensors \*-------------------------------------------------------------------------------------------*/ #ifdef USE_MGC3130 AGPIO(GPIO_MGC3130_XFER), AGPIO(GPIO_MGC3130_RESET), #endif #ifdef USE_MAX31855 AGPIO(GPIO_MAX31855CS), // MAX31855 Serial interface AGPIO(GPIO_MAX31855CLK), // MAX31855 Serial interface AGPIO(GPIO_MAX31855DO), // MAX31855 Serial interface #endif #ifdef USE_HRE AGPIO(GPIO_HRE_CLOCK), AGPIO(GPIO_HRE_DATA), #endif #ifdef USE_A4988_STEPPER AGPIO(GPIO_A4988_DIR), // A4988 direction pin AGPIO(GPIO_A4988_STP), // A4988 step pin // folowing are not mandatory AGPIO(GPIO_A4988_ENA), // A4988 enabled pin AGPIO(GPIO_A4988_MS1) + MAX_A4988_MSS, // A4988 microstep pin1 to pin3 #endif #ifdef USE_DEEPSLEEP AGPIO(GPIO_DEEPSLEEP), #endif #ifdef USE_KEELOQ AGPIO(GPIO_CC1101_GDO0), // CC1101 pin for RX AGPIO(GPIO_CC1101_GDO2), // CC1101 pin for RX #endif #ifdef USE_HRXL AGPIO(GPIO_HRXL_RX), #endif #ifdef USE_DYP AGPIO(GPIO_DYP_RX), #endif #ifdef USE_AS3935 AGPIO(GPIO_AS3935), // AS3935 IRQ Pin #endif #ifdef USE_TELEINFO AGPIO(GPIO_TELEINFO_RX), AGPIO(GPIO_TELEINFO_ENABLE), #endif #ifdef USE_MIEL_HVAC AGPIO(GPIO_MIEL_HVAC_TX), // Mitsubishi Electric HVAC TX pin AGPIO(GPIO_MIEL_HVAC_RX), // Mitsubishi Electric HVAC RX pin #endif #ifdef USE_WIEGAND AGPIO(GPIO_WIEGAND_D0), // Date line D0 of Wiegand devices AGPIO(GPIO_WIEGAND_D1), // Date line D1 of Wiegand devices #endif #ifdef USE_NEOPOOL AGPIO(GPIO_NEOPOOL_TX), // Sugar Valley RS485 Interface AGPIO(GPIO_NEOPOOL_RX), // Sugar Valley RS485 Interface #endif /*-------------------------------------------------------------------------------------------*\ * ESP32 specifics \*-------------------------------------------------------------------------------------------*/ #ifdef ESP32 #ifdef USE_WEBCAM AGPIO(GPIO_WEBCAM_PWDN), AGPIO(GPIO_WEBCAM_RESET), AGPIO(GPIO_WEBCAM_XCLK), AGPIO(GPIO_WEBCAM_SIOD), AGPIO(GPIO_WEBCAM_SIOC), AGPIO(GPIO_WEBCAM_DATA) + MAX_WEBCAM_DATA, AGPIO(GPIO_WEBCAM_VSYNC), AGPIO(GPIO_WEBCAM_HREF), AGPIO(GPIO_WEBCAM_PCLK), AGPIO(GPIO_WEBCAM_PSCLK), AGPIO(GPIO_WEBCAM_HSD) + MAX_WEBCAM_HSD, AGPIO(GPIO_WEBCAM_PSRCS), #endif // USE_WEBCAM #ifdef USE_ETHERNET AGPIO(GPIO_ETH_PHY_POWER), AGPIO(GPIO_ETH_PHY_MDC), AGPIO(GPIO_ETH_PHY_MDIO), // Ethernet #endif // USE_ETHERNET /*-------------------------------------------------------------------------------------------*\ * ESP32 multiple Analog / Digital converter inputs \*-------------------------------------------------------------------------------------------*/ AGPIO(GPIO_ADC_INPUT) + MAX_ADCS, // Analog inputs AGPIO(GPIO_ADC_TEMP) + MAX_ADCS, // Thermistor AGPIO(GPIO_ADC_LIGHT) + MAX_ADCS, // Light sensor AGPIO(GPIO_ADC_BUTTON) + MAX_KEYS, // Button AGPIO(GPIO_ADC_BUTTON_INV) + MAX_KEYS, AGPIO(GPIO_ADC_RANGE) + MAX_ADCS, // Range AGPIO(GPIO_ADC_CT_POWER) + MAX_ADCS, // Current AGPIO(GPIO_ADC_JOY) + MAX_ADCS, // Joystick AGPIO(GPIO_ADC_PH) + MAX_ADCS, // Analog PH Sensor #endif // ESP32 }; /*-------------------------------------------------------------------------------------------*\ * ESP8266 single Analog / Digital converter input \*-------------------------------------------------------------------------------------------*/ #ifdef ESP8266 const uint16_t kAdcNiceList[] PROGMEM = { GPIO_NONE, // Not used AGPIO(GPIO_ADC_INPUT), // Analog inputs AGPIO(GPIO_ADC_TEMP), // Thermistor AGPIO(GPIO_ADC_LIGHT), // Light sensor AGPIO(GPIO_ADC_BUTTON) + MAX_KEYS, // Button AGPIO(GPIO_ADC_BUTTON_INV) + MAX_KEYS, AGPIO(GPIO_ADC_RANGE), // Range AGPIO(GPIO_ADC_CT_POWER), // Current AGPIO(GPIO_ADC_JOY), // Joystick AGPIO(GPIO_ADC_PH), // Analog PH Sensor }; #endif // ESP8266 // User selectable ADC functionality enum UserSelectableAdc { ADC_NONE, // Not used ADC_INPUT, // Analog input ADC_TEMP, // Thermistor ADC_LIGHT, // Light sensor ADC_BUTTON, // Button ADC_BUTTON_INV, ADC_RANGE, // Range ADC_CT_POWER, // Current ADC_JOY, // Joystick ADC_PH, // Analog PH Sensor // ADC_SWITCH, // Switch // ADC_SWITCH_INV, ADC_END }; /*********************************************************************************************\ * ATTENTION: No user changeable features beyond this point - do not add templates !!! \*********************************************************************************************/ #define GPIO_ANY 32 // Any GPIO #ifdef ESP8266 #define MAX_GPI8_PIN 17 // Number of supported GPIO (0..16) #define FLASH_PINS 6 // Number of flash chip pins #define MAX_GPIO_PIN 18 // Number of supported GPIO (0..16 + ADC0) #define ADC0_PIN 17 // Pin number of ADC0 #define MIN_FLASH_PINS 4 // Number of flash chip pins unusable for configuration (GPIO6, 7, 8 and 11) #define MAX_USER_PINS 14 // MAX_GPIO_PIN - MIN_FLASH_PINS #define WEMOS_MODULE 17 // Wemos module const char PINS_WEMOS[] PROGMEM = "D3TXD4RXD2D1flashcFLFLolD6D7D5D8D0A0"; typedef struct MYIO8 { uint8_t io[MAX_GPI8_PIN]; } myio8; // 17 bytes typedef struct MYCFGIO8285 { uint8_t io[MAX_GPI8_PIN - MIN_FLASH_PINS]; } mycfgio8285; // 13 bytes typedef struct MYTMPLT8285 { mycfgio8285 gp; uint8_t flag; } mytmplt8285; // 14 bytes typedef struct MYCFGIO8266 { uint8_t io[MAX_GPI8_PIN - FLASH_PINS]; } mycfgio8266; // 11 bytes typedef struct MYTMPLT8266 { mycfgio8266 gp; uint8_t flag; } mytmplt8266; // 12 bytes #endif // ESP8266 #ifdef ESP32 #define MAX_GPIO_PIN 40 // Number of supported GPIO #define MIN_FLASH_PINS 4 // Number of flash chip pins unusable for configuration (GPIO6, 7, 8 and 11) #define MAX_USER_PINS 36 // MAX_GPIO_PIN - MIN_FLASH_PINS #define WEMOS_MODULE 0 // Wemos module // 0 1 2 3 4 5 6 7 8 9101112131415161718192021222324252627282930313233343536373839 const char PINS_WEMOS[] PROGMEM = "IOTXIORXIOIOflashcFLFLolIOIOIOIOIOIOIOIOIOIOIOIOIOIOIOIOIOIOIOIOAOAOIAIAIAIAIAIA"; #endif // ESP32 //******************************************************************************************** typedef struct MYIO { uint16_t io[MAX_GPIO_PIN]; } myio; // 18 * 2 = 36 bytes / 40 * 2 = 80 bytes typedef struct MYCFGIO { uint16_t io[MAX_USER_PINS]; } mycfgio; // 14 * 2 = 28 bytes / 36 * 2 = 72 bytes #define GPIO_FLAG_USED 0 // Currently no flags used typedef union { uint16_t data; struct { uint16_t spare00 : 1; uint16_t spare01 : 1; uint16_t spare02 : 1; uint16_t spare03 : 1; uint16_t spare04 : 1; uint16_t spare05 : 1; uint16_t spare06 : 1; uint16_t spare07 : 1; uint16_t spare08 : 1; uint16_t spare09 : 1; uint16_t spare10 : 1; uint16_t spare11 : 1; uint16_t spare12 : 1; uint16_t spare13 : 1; uint16_t spare14 : 1; uint16_t spare15 : 1; }; } gpio_flag; // 2 bytes typedef struct MYTMPLT { mycfgio gp; // 28 / 72 bytes gpio_flag flag; // 2 bytes } mytmplt; // 30 / 74 bytes //******************************************************************************************** #ifdef ESP8266 #include "tasmota_template_legacy.h" /********************************************************************************************\ * ESP8266 Module Templates \********************************************************************************************/ #define USER_MODULE 255 // Supported hardware modules enum SupportedModules { SONOFF_BASIC, SONOFF_RF, SONOFF_SV, SONOFF_TH, SONOFF_DUAL, SONOFF_POW, SONOFF_4CH, SONOFF_S2X, SLAMPHER, SONOFF_TOUCH, SONOFF_LED, CH1, CH4, MOTOR, ELECTRODRAGON, EXS_RELAY, WION, WEMOS, SONOFF_DEV, H801, SONOFF_SC, SONOFF_BN, SONOFF_4CHPRO, HUAFAN_SS, SONOFF_BRIDGE, SONOFF_B1, AILIGHT, SONOFF_T11, SONOFF_T12, SONOFF_T13, SUPLA1, WITTY, YUNSHAN, MAGICHOME, LUANIHVIO, KMC_70011, ARILUX_LC01, ARILUX_LC11, SONOFF_DUAL_R2, ARILUX_LC06, SONOFF_S31, ZENGGE_ZF_WF017, SONOFF_POW_R2, SONOFF_IFAN02, BLITZWOLF_BWSHP, SHELLY1, SHELLY2, PHILIPS, NEO_COOLCAM, ESP_SWITCH, OBI, TECKIN, APLIC_WDP303075, TUYA_DIMMER, GOSUND, ARMTRONIX_DIMMERS, SK03_TUYA, PS_16_DZ, TECKIN_US, MANZOKU_EU_4, OBI2, YTF_IR_BRIDGE, DIGOO, KA10, ZX2820, MI_DESK_LAMP, SP10, WAGA, SYF05, SONOFF_L1, SONOFF_IFAN03, EXS_DIMMER, PWM_DIMMER, SONOFF_D1, SONOFF_ZB_BRIDGE, MAXMODULE }; const char kModuleNames[] PROGMEM = "Sonoff Basic|Sonoff RF|Sonoff SV|Sonoff TH|Sonoff Dual|Sonoff Pow|Sonoff 4CH|Sonoff S2X|Slampher|Sonoff Touch|" "Sonoff LED|1 Channel|4 Channel|Motor C/AC|ElectroDragon|EXS Relay(s)|WiOn|Generic|Sonoff Dev|H801|" "Sonoff SC|Sonoff BN-SZ|Sonoff 4CH Pro|Huafan SS|Sonoff Bridge|Sonoff B1|AiLight|Sonoff T1 1CH|Sonoff T1 2CH|Sonoff T1 3CH|" "Supla Espablo|Witty Cloud|Yunshan Relay|MagicHome|Luani HVIO|KMC 70011|Arilux LC01|Arilux LC11|Sonoff Dual R2|Arilux LC06|" "Sonoff S31|Zengge WF017|Sonoff Pow R2|Sonoff iFan02|BlitzWolf SHP|Shelly 1|Shelly 2|Xiaomi Philips|Neo Coolcam|ESP Switch|" "OBI Socket|Teckin|AplicWDP303075|Tuya MCU|Gosund SP1 v23|ARMTR Dimmer|SK03 Outdoor|PS-16-DZ|Teckin US|Manzoku strip|" "OBI Socket 2|YTF IR Bridge|Digoo DG-SP202|KA10|Luminea ZX2820|Mi Desk Lamp|SP10|WAGA CHCZ02MB|SYF05|Sonoff L1|" "Sonoff iFan03|EXS Dimmer|PWM Dimmer|Sonoff D1|Sonoff ZbBridge" ; const uint8_t kModuleNiceList[] PROGMEM = { SONOFF_BASIC, // Sonoff Relay Devices SONOFF_RF, SONOFF_TH, SONOFF_DUAL, SONOFF_DUAL_R2, SONOFF_POW, SONOFF_POW_R2, SONOFF_4CH, SONOFF_4CHPRO, SONOFF_S31, // Sonoff Socket Relay Devices with Energy Monitoring SONOFF_S2X, // Sonoff Socket Relay Devices SONOFF_TOUCH, // Sonoff Switch Devices SONOFF_T11, SONOFF_T12, SONOFF_T13, #ifdef USE_SONOFF_D1 SONOFF_D1, // Sonoff D1 #endif SONOFF_LED, // Sonoff Light Devices SONOFF_BN, #ifdef USE_SONOFF_L1 SONOFF_L1, #endif SONOFF_B1, // Sonoff Light Bulbs SLAMPHER, #ifdef USE_SONOFF_SC SONOFF_SC, // Sonoff Environmemtal Sensor #endif #ifdef USE_SONOFF_IFAN SONOFF_IFAN02, // Sonoff Fan SONOFF_IFAN03, #endif #ifdef USE_SONOFF_RF SONOFF_BRIDGE, // Sonoff Bridge #endif #ifdef USE_ZIGBEE_EZSP SONOFF_ZB_BRIDGE, #endif SONOFF_SV, // Sonoff Development Devices SONOFF_DEV, CH1, // Relay Devices CH4, MOTOR, ELECTRODRAGON, EXS_RELAY, SUPLA1, LUANIHVIO, YUNSHAN, WION, SHELLY1, SHELLY2, BLITZWOLF_BWSHP, // Socket Relay Devices with Energy Monitoring TECKIN, TECKIN_US, APLIC_WDP303075, GOSUND, ZX2820, SK03_TUYA, DIGOO, KA10, SP10, WAGA, NEO_COOLCAM, // Socket Relay Devices OBI, OBI2, MANZOKU_EU_4, ESP_SWITCH, // Switch Devices #ifdef USE_TUYA_MCU TUYA_DIMMER, // Dimmer Devices #endif #ifdef USE_ARMTRONIX_DIMMERS ARMTRONIX_DIMMERS, #endif #ifdef USE_PS_16_DZ PS_16_DZ, #endif #ifdef USE_EXS_DIMMER EXS_DIMMER, #endif #ifdef USE_PWM_DIMMER PWM_DIMMER, #endif H801, // Light Devices MAGICHOME, ARILUX_LC01, ARILUX_LC06, ARILUX_LC11, ZENGGE_ZF_WF017, HUAFAN_SS, #ifdef ROTARY_V1 MI_DESK_LAMP, #endif KMC_70011, AILIGHT, // Light Bulbs PHILIPS, SYF05, YTF_IR_BRIDGE, WITTY, // Development Devices WEMOS }; enum SupportedTemplates8285 { TMP_SONOFF_BASIC, TMP_SONOFF_SV, TMP_SONOFF_DUAL, TMP_SONOFF_POW, TMP_SONOFF_LED, TMP_ELECTRODRAGON, TMP_EXS_RELAY, TMP_WION, TMP_SONOFF_DEV, TMP_H801, TMP_SONOFF_SC, TMP_SONOFF_BN, TMP_HUAFAN_SS, TMP_SONOFF_BRIDGE, TMP_SONOFF_B1, TMP_AILIGHT, TMP_SONOFF_T11, TMP_SUPLA1, TMP_WITTY, TMP_YUNSHAN, TMP_MAGICHOME, TMP_LUANIHVIO, TMP_KMC_70011, TMP_ARILUX_LC01, TMP_ARILUX_LC11, TMP_ARILUX_LC06, TMP_ZENGGE_ZF_WF017, TMP_SONOFF_POW_R2, TMP_BLITZWOLF_BWSHP, TMP_SHELLY1, TMP_SHELLY2, TMP_PHILIPS, TMP_NEO_COOLCAM, TMP_ESP_SWITCH, TMP_OBI, TMP_TECKIN, TMP_APLIC_WDP303075, TMP_TUYA_DIMMER, TMP_GOSUND, TMP_ARMTRONIX_DIMMERS, TMP_SK03_TUYA, TMP_PS_16_DZ, TMP_TECKIN_US, TMP_MANZOKU_EU_4, TMP_OBI2, TMP_YTF_IR_BRIDGE, TMP_DIGOO, TMP_KA10, TMP_ZX2820, TMP_MI_DESK_LAMP, TMP_SP10, TMP_WAGA, TMP_SYF05, TMP_EXS_DIMMER, TMP_PWM_DIMMER, TMP_SONOFF_ZB_BRIDGE, TMP_MAXMODULE_8285 }; enum SupportedTemplates8266 { TMP_WEMOS = TMP_MAXMODULE_8285, TMP_SONOFF_4CH, TMP_SONOFF_T12, TMP_SONOFF_T13, TMP_SONOFF_DUAL_R2, TMP_SONOFF_IFAN03, TMP_MAXMODULE_8266 }; const uint8_t kModuleTemplateList[MAXMODULE] PROGMEM = { TMP_SONOFF_BASIC, TMP_SONOFF_BASIC, // SONOFF_RF TMP_SONOFF_SV, TMP_SONOFF_BASIC, // SONOFF_TH TMP_SONOFF_DUAL, TMP_SONOFF_POW, TMP_SONOFF_4CH, TMP_SONOFF_BASIC, // SONOFF_S2X TMP_SONOFF_BASIC, // SLAMPHER TMP_SONOFF_T11, // SONOFF_TOUCH TMP_SONOFF_LED, TMP_SONOFF_BASIC, // CH1 TMP_SONOFF_DUAL, // CH4 TMP_SONOFF_BASIC, // MOTOR TMP_ELECTRODRAGON, TMP_EXS_RELAY, TMP_WION, TMP_WEMOS, TMP_SONOFF_DEV, TMP_H801, TMP_SONOFF_SC, TMP_SONOFF_BN, TMP_SONOFF_4CH, // SONOFF_4CHPRO TMP_HUAFAN_SS, TMP_SONOFF_BRIDGE, TMP_SONOFF_B1, TMP_AILIGHT, TMP_SONOFF_T11, TMP_SONOFF_T12, TMP_SONOFF_T13, TMP_SUPLA1, TMP_WITTY, TMP_YUNSHAN, TMP_MAGICHOME, TMP_LUANIHVIO, TMP_KMC_70011, TMP_ARILUX_LC01, TMP_ARILUX_LC11, TMP_SONOFF_DUAL_R2, TMP_ARILUX_LC06, TMP_SONOFF_POW_R2, // SONOFF_S31 TMP_ZENGGE_ZF_WF017, TMP_SONOFF_POW_R2, TMP_SONOFF_4CH, // SONOFF_IFAN02 TMP_BLITZWOLF_BWSHP, TMP_SHELLY1, TMP_SHELLY2, TMP_PHILIPS, TMP_NEO_COOLCAM, TMP_ESP_SWITCH, TMP_OBI, TMP_TECKIN, TMP_APLIC_WDP303075, TMP_TUYA_DIMMER, TMP_GOSUND, TMP_ARMTRONIX_DIMMERS, TMP_SK03_TUYA, TMP_PS_16_DZ, TMP_TECKIN_US, TMP_MANZOKU_EU_4, TMP_OBI2, TMP_YTF_IR_BRIDGE, TMP_DIGOO, TMP_KA10, TMP_ZX2820, TMP_MI_DESK_LAMP, TMP_SP10, TMP_WAGA, TMP_SYF05, TMP_SONOFF_DUAL, // SONOFF_L1 TMP_SONOFF_IFAN03, TMP_EXS_DIMMER, TMP_PWM_DIMMER, TMP_SONOFF_DUAL, // SONOFF_D1 TMP_SONOFF_ZB_BRIDGE, }; /*********************************************************************************************\ * Templates with 12 usable pins (ESP8266) \*********************************************************************************************/ const mytmplt8266 kModules8266[TMP_MAXMODULE_8285] PROGMEM = { { // SONOFF_BASIC - Sonoff Basic (ESP8266) GPI8_KEY1, // GPIO00 Button GPI8_USER, // GPIO01 Serial RXD and Optional sensor GPI8_USER, // GPIO02 Only available on newer Sonoff Basic R2 V1 GPI8_USER, // GPIO03 Serial TXD and Optional sensor GPI8_USER, // GPIO04 Optional sensor 0, // GPIO05 // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) // GPIO09 (SD_DATA2 Flash QIO or ESP8285) // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPI8_REL1, // GPIO12 Red Led and Relay (0 = Off, 1 = On) GPI8_LED1_INV, // GPIO13 Green Led (0 = On, 1 = Off) - Link and Power status GPI8_USER, // GPIO14 Optional sensor 0, // GPIO15 0, // GPIO16 0 // ADC0 Analog input }, { // SONOFF_SV - Sonoff SV (ESP8266) GPI8_KEY1, // GPIO00 Button GPI8_USER, // GPIO01 Serial RXD and Optional sensor 0, GPI8_USER, // GPIO03 Serial TXD and Optional sensor GPI8_USER, // GPIO04 Optional sensor GPI8_USER, // GPIO05 Optional sensor // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) // GPIO09 (SD_DATA2 Flash QIO or ESP8285) // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPI8_REL1, // GPIO12 Red Led and Relay (0 = Off, 1 = On) GPI8_LED1_INV, // GPIO13 Green Led (0 = On, 1 = Off) - Link and Power status GPI8_USER, // GPIO14 Optional sensor 0, 0, GPI8_USER // ADC0 Analog input }, { // SONOFF_DUAL - Sonoff Dual (ESP8266) GPI8_USER, // GPIO00 Pad GPI8_TXD, // GPIO01 Relay control 0, GPI8_RXD, // GPIO03 Relay control GPI8_USER, // GPIO04 Optional sensor 0, // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) // GPIO09 (SD_DATA2 Flash QIO or ESP8285) // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) 0, GPI8_LED1_INV, // GPIO13 Blue Led (0 = On, 1 = Off) - Link and Power status GPI8_USER, // GPIO14 Optional sensor 0, 0, 0 }, { // SONOFF_POW - Sonoff Pow (ESP8266 - HLW8012) GPI8_KEY1, // GPIO00 Button 0, 0, 0, 0, GPI8_NRG_SEL, // GPIO05 HLW8012 Sel output (1 = Voltage) // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) // GPIO09 (SD_DATA2 Flash QIO or ESP8285) // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPI8_REL1, // GPIO12 Red Led and Relay (0 = Off, 1 = On) GPI8_NRG_CF1, // GPIO13 HLW8012 CF1 voltage / current GPI8_HLW_CF, // GPIO14 HLW8012 CF power GPI8_LED1, // GPIO15 Blue Led (0 = On, 1 = Off) - Link and Power status 0, 0 }, { // SONOFF_LED - Sonoff LED (ESP8266) GPI8_KEY1, // GPIO00 Button 0, 0, 0, GPI8_USER, // GPIO04 Optional sensor (PWM3 Green) GPI8_USER, // GPIO05 Optional sensor (PWM2 Red) // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) // GPIO09 (SD_DATA2 Flash QIO or ESP8285) // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPI8_PWM1, // GPIO12 Cold light (PWM0 Cold) GPI8_LED1_INV, // GPIO13 Blue Led (0 = On, 1 = Off) - Link and Power status GPI8_PWM2, // GPIO14 Warm light (PWM1 Warm) GPI8_USER, // GPIO15 Optional sensor (PWM4 Blue) 0, 0 }, { // ELECTRODRAGON - ElectroDragon IoT Relay Board (ESP8266) GPI8_KEY2, // GPIO00 Button 2 GPI8_USER, // GPIO01 Serial RXD and Optional sensor GPI8_KEY1, // GPIO02 Button 1 GPI8_USER, // GPIO03 Serial TXD and Optional sensor GPI8_USER, // GPIO04 Optional sensor GPI8_USER, // GPIO05 Optional sensor // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) // GPIO09 (SD_DATA2 Flash QIO or ESP8285) // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPI8_REL2, // GPIO12 Red Led and Relay 2 (0 = Off, 1 = On) GPI8_REL1, // GPIO13 Red Led and Relay 1 (0 = Off, 1 = On) GPI8_USER, // GPIO14 Optional sensor GPI8_USER, // GPIO15 Optional sensor GPI8_LED1, // GPIO16 Green/Blue Led (1 = On, 0 = Off) - Link and Power status GPI8_USER // ADC0 A0 Analog input }, { // EXS_RELAY - ES-Store Latching relay(s) (ESP8266) // https://ex-store.de/ESP8266-WiFi-Relay-V31 // V3.1 Module Pin 1 VCC 3V3, Module Pin 6 GND // https://ex-store.de/2-Kanal-WiFi-WLan-Relay-V5-Blackline-fuer-Unterputzmontage GPI8_USER, // GPIO00 V3.1 Module Pin 8 - V5.0 Module Pin 4 GPI8_USER, // GPIO01 UART0_TXD V3.1 Module Pin 2 - V5.0 Module Pin 3 GPI8_USER, // GPIO02 V3.1 Module Pin 7 GPI8_USER, // GPIO03 UART0_RXD V3.1 Module Pin 3 GPI8_USER, // GPIO04 V3.1 Module Pin 10 - V5.0 Module Pin 2 GPI8_USER, // GPIO05 V3.1 Module Pin 9 - V5.0 Module Pin 1 // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) // GPIO09 (SD_DATA2 Flash QIO or ESP8285) // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPI8_REL1, // GPIO12 Relay1 ( 1 = Off) GPI8_REL2, // GPIO13 Relay1 ( 1 = On) GPI8_USER, // GPIO14 V3.1 Module Pin 5 - V5.0 GPI8_REL3_INV Relay2 ( 1 = Off) GPI8_LED1, // GPIO15 V5.0 LED1 - Link and Power status GPI8_USER, // GPIO16 V3.1 Module Pin 4 - V5.0 GPI8_REL4_INV Relay2 ( 1 = On) 0 }, { // WION - Indoor Tap (ESP8266) // https://www.amazon.com/gp/product/B00ZYLUBJU/ref=s9_acsd_al_bw_c_x_3_w GPI8_USER, // GPIO00 Optional sensor (pm clock) 0, GPI8_LED1, // GPIO02 Green Led (1 = On, 0 = Off) - Link and Power status 0, 0, 0, // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) // GPIO09 (SD_DATA2 Flash QIO or ESP8285) // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPI8_USER, // GPIO12 Optional sensor (pm data) GPI8_KEY1, // GPIO13 Button 0, GPI8_REL1, // GPIO15 Relay (0 = Off, 1 = On) 0, 0 }, { // SONOFF_DEV - Sonoff Dev (ESP8266) GPI8_KEY1, // GPIO00 E-FW Button GPI8_USER, // GPIO01 TX Serial RXD and Optional sensor 0, // GPIO02 GPI8_USER, // GPIO03 RX Serial TXD and Optional sensor GPI8_USER, // GPIO04 Optional sensor GPI8_USER, // GPIO05 Optional sensor // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) // GPIO09 (SD_DATA2 Flash QIO or ESP8285) // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPI8_USER, // GPIO12 GPI8_USER, // GPIO13 BLUE LED GPI8_USER, // GPIO14 Optional sensor 0, // GPIO15 0, // GPIO16 GPI8_USER // ADC0 A0 Analog input }, { // H801 - Lixada H801 Wifi (ESP8266) GPI8_USER, // GPIO00 E-FW Button GPI8_LED1, // GPIO01 Green LED - Link and Power status GPI8_USER, // GPIO02 TX and Optional sensor - Pin next to TX on the PCB GPI8_USER, // GPIO03 RX and Optional sensor - Pin next to GND on the PCB GPI8_PWM5, // GPIO04 W2 - PWM5 GPI8_LED2_INV, // GPIO05 Red LED // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) // GPIO09 (SD_DATA2 Flash QIO or ESP8285) // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPI8_PWM3, // GPIO12 Blue GPI8_PWM2, // GPIO13 Green GPI8_PWM4, // GPIO14 W1 - PWM4 GPI8_PWM1, // GPIO15 Red 0, 0 }, { // SONOFF_SC - onoff SC (ESP8266) GPI8_KEY1, // GPIO00 Button GPI8_TXD, // GPIO01 RXD to ATMEGA328P GPI8_USER, // GPIO02 Optional sensor GPI8_RXD, // GPIO03 TXD to ATMEGA328P 0, 0, // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) // GPIO09 (SD_DATA2 Flash QIO or ESP8285) // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) 0, GPI8_LED1_INV, // GPIO13 Green Led (0 = On, 1 = Off) - Link and Power status 0, 0, 0, 0 }, { // SONOFF_BN - Sonoff BN-SZ01 Ceiling led (ESP8285) 0, 0, 0, 0, 0, 0, // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) // GPIO09 (SD_DATA2 Flash QIO or ESP8285) // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPI8_PWM1, // GPIO12 Light GPI8_LED1_INV, // GPIO13 Red Led (0 = On, 1 = Off) - Link and Power status 0, 0, 0, 0 }, { // HUAFAN_SS - Hua Fan Smart Socket (ESP8266) - like Sonoff Pow GPI8_LEDLNK_INV, // GPIO00 Blue Led (0 = On, 1 = Off) - Link status 0, 0, GPI8_LED1_INV, // GPIO03 Red Led (0 = On, 1 = Off) - Power status GPI8_KEY1, // GPIO04 Button GPI8_REL1_INV, // GPIO05 Relay (0 = On, 1 = Off) // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) // GPIO09 (SD_DATA2 Flash QIO or ESP8285) // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPI8_NRG_CF1, // GPIO12 HLW8012 CF1 voltage / current GPI8_NRG_SEL, // GPIO13 HLW8012 Sel output (1 = Voltage) GPI8_HLW_CF, // GPIO14 HLW8012 CF power 0, 0, 0 }, { // SONOFF_BRIDGE - Sonoff RF Bridge 433 (ESP8285) GPI8_KEY1, // GPIO00 Button GPI8_TXD, // GPIO01 RF bridge control GPI8_USER, // GPIO02 Optional sensor GPI8_RXD, // GPIO03 RF bridge control GPI8_USER, // GPIO04 Optional sensor GPI8_USER, // GPIO05 Optional sensor // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) // GPIO09 (SD_DATA2 Flash QIO or ESP8285) // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPI8_USER, // GPIO12 Optional sensor GPI8_LED1_INV, // GPIO13 Blue Led (0 = On, 1 = Off) - Link and Power status GPI8_USER, // GPIO14 Optional sensor 0, 0, 0 }, { // SONOFF_B1 - Sonoff B1 (ESP8285 - my9231) GPI8_KEY1, // GPIO00 Pad GPI8_USER, // GPIO01 Serial RXD and Optional sensor pad GPI8_USER, // GPIO02 Optional sensor SDA pad GPI8_USER, // GPIO03 Serial TXD and Optional sensor pad 0, 0, // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) // GPIO09 (SD_DATA2 Flash QIO or ESP8285) // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPI8_DI, // GPIO12 my9231 DI 0, GPI8_DCKI, // GPIO14 my9231 DCKI 0, 0, 0 }, { // AILIGHT - Ai-Thinker RGBW led (ESP8266 - my9291) GPI8_KEY1, // GPIO00 Pad GPI8_USER, // GPIO01 Serial RXD and Optional sensor pad GPI8_USER, // GPIO02 Optional sensor SDA pad GPI8_USER, // GPIO03 Serial TXD and Optional sensor pad 0, 0, // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) // GPIO09 (SD_DATA2 Flash QIO or ESP8285) // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) 0, GPI8_DI, // GPIO13 my9291 DI 0, GPI8_DCKI, // GPIO15 my9291 DCKI 0, 0 }, { // SONOFF_T11 - Sonoff T1 1CH (ESP8285) GPI8_KEY1, // GPIO00 Button 1 GPI8_USER, // GPIO01 Serial RXD and Optional sensor GPI8_USER, // GPIO02 Optional Sensor (J3 Pin 5) GPI8_USER, // GPIO03 Serial TXD and Optional sensor 0, 0, // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) // GPIO09 (SD_DATA2 Flash QIO or ESP8285) // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPI8_REL1, // GPIO12 Blue Led and Relay 1 (0 = Off, 1 = On) GPI8_LED1_INV, // GPIO13 Blue Led (0 = On, 1 = Off) - Link and Power status 0, 0, 0, 0 }, { // SUPLA1 - Supla Espablo (ESP8266) // http://www.wykop.pl/ramka/3325399/diy-supla-do-puszki-instalacyjnej-podtynkowej-supla-org/ 0, // GPIO00 Flash jumper GPI8_USER, // GPIO01 Serial RXD and Optional sensor #ifdef USE_DS18x20 GPI8_DSB, // GPIO02 DS18B20 sensor #else GPI8_USER, // GPIO02 Optional sensor #endif GPI8_USER, // GPIO03 Serial TXD and Optional sensor GPI8_KEY1, // GPIO04 Button 1 GPI8_REL1, // GPIO05 Relay 1 (0 = Off, 1 = On) // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) // GPIO09 (SD_DATA2 Flash QIO or ESP8285) // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPI8_USER, // GPIO12 Optional sensor GPI8_REL2, // GPIO13 Relay 2 (0 = Off, 1 = On) GPI8_USER, // GPIO14 Optional sensor 0, GPI8_LED1, // GPIO16 Led (1 = On, 0 = Off) - Link and Power status GPI8_USER // ADC0 A0 Analog input }, { // WITTY - Witty Cloud Dev Board (ESP8266) // https://www.aliexpress.com/item/ESP8266-serial-WIFI-Witty-cloud-Development-Board-ESP-12F-module-MINI-nodemcu/32643464555.html GPI8_USER, // GPIO00 D3 flash push button on interface board GPI8_USER, // GPIO01 Serial RXD and Optional sensor GPI8_LED1_INV, // GPIO02 D4 Blue Led (0 = On, 1 = Off) on ESP-12F - Link and Power status GPI8_USER, // GPIO03 Serial TXD and Optional sensor GPI8_KEY1, // GPIO04 D2 push button on ESP-12F board GPI8_USER, // GPIO05 D1 optional sensor // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) // GPIO09 (SD_DATA2 Flash QIO or ESP8285) // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPI8_PWM2, // GPIO12 D6 RGB LED Green GPI8_PWM3, // GPIO13 D7 RGB LED Blue GPI8_USER, // GPIO14 D5 optional sensor GPI8_PWM1, // GPIO15 D8 RGB LED Red GPI8_USER, // GPIO16 D0 optional sensor GPI8_USER // ADC0 A0 Light sensor / Requires USE_ADC_VCC in user_config.h to be disabled }, { // YUNSHAN - Yunshan Wifi Relay (ESP8266) // https://www.ebay.com/p/Esp8266-220v-10a-Network-Relay-WiFi-Module/1369583381 // Schematics and Info https://ucexperiment.wordpress.com/2016/12/18/yunshan-esp8266-250v-15a-acdc-network-wifi-relay-module/ 0, // GPIO00 Flash jumper - Module Pin 8 GPI8_USER, // GPIO01 Serial RXD and Optional sensor - Module Pin 2 GPI8_LED1_INV, // GPIO02 Blue Led (0 = On, 1 = Off) on ESP-12F - Module Pin 7 - Link and Power status GPI8_USER, // GPIO03 Serial TXD and Optional sensor - Module Pin 3 GPI8_REL1, // GPIO04 Red Led and Relay (0 = Off, 1 = On) - Module Pin 10 GPI8_KEY1, // GPIO05 Blue Led and OptoCoupler input - Module Pin 9 // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) // GPIO09 (SD_DATA2 Flash QIO or ESP8285) // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) 0, 0, 0, 0, 0, 0 }, { // MAGICHOME - Magic Home (aka Flux-light) (ESP8266) and Arilux LC10 (ESP8285) // https://www.aliexpress.com/item/Magic-Home-Mini-RGB-RGBW-Wifi-Controller-For-Led-Strip-Panel-light-Timing-Function-16million-colors/32686853650.html 0, GPI8_USER, // GPIO01 Serial RXD and Optional sensor GPI8_LED1_INV, // GPIO02 Blue onboard LED - Link and Power status GPI8_USER, // GPIO03 Serial TXD and Optional sensor GPI8_ARIRFRCV, // GPIO04 IR or RF receiver (optional) (Arilux LC10) GPI8_PWM2, // GPIO05 RGB LED Green // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) // GPIO09 (SD_DATA2 Flash QIO or ESP8285) // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPI8_PWM3, // GPIO12 RGB LED Blue GPI8_USER, // GPIO13 RGBW LED White (optional - set to PWM4 for Cold White or Warm White as used on Arilux LC10) GPI8_PWM1, // GPIO14 RGB LED Red GPI8_ARIRFSEL, // GPIO15 RF receiver control (Arilux LC10) 0, 0 }, { // LUANIHVIO - ESP8266_HVIO // https://luani.de/projekte/esp8266-hvio/ 0, // GPIO00 Flash jumper GPI8_USER, // GPIO01 Serial RXD and Optional sensor GPI8_USER, // GPIO02 Optional sensor / I2C SDA pad GPI8_USER, // GPIO03 Serial TXD and Optional sensor GPI8_REL1, // GPIO04 Relay 1 (0 = Off, 1 = On) GPI8_REL2, // GPIO05 Relay 2 (0 = Off, 1 = On) // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) // GPIO09 (SD_DATA2 Flash QIO or ESP8285) // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPI8_SWT1, // GPIO12 External input 1 (0 = On, 1 = Off) GPI8_SWT2, // GPIO13 External input 2 (0 = On, 1 = Off) GPI8_USER, // GPIO14 Optional sensor / I2C SCL pad GPI8_LED1, // GPIO15 Led (1 = On, 0 = Off) - Link and Power status 0, GPI8_USER // ADC0 A0 Analog input }, { // KMC_70011 - KMC 70011 // https://www.amazon.com/KMC-Timing-Monitoring-Network-125V-240V/dp/B06XRX2GTQ GPI8_KEY1, // GPIO00 Button 0, 0, 0, GPI8_HLW_CF, // GPIO04 HLW8012 CF power GPI8_NRG_CF1, // GPIO05 HLW8012 CF1 voltage / current // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) // GPIO09 (SD_DATA2 Flash QIO or ESP8285) // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPI8_NRG_SEL, // GPIO12 HLW8012 SEL (1 = Voltage) GPI8_LED1_INV, // GPIO13 Green Led - Link and Power status GPI8_REL1, // GPIO14 Relay 0, 0, 0 }, { // ARILUX_LC01 - Arilux AL-LC01 (ESP8285) // https://www.banggood.com/nl/ARILUX-AL-LC01-Super-Mini-LED-WIFI-Smart-RGB-Controller-For-RGB-LED-Strip-Light-DC-9-12V-p-1058603.html // (PwmFrequency 1111Hz) GPI8_KEY1, // GPIO00 Optional Button GPI8_USER, // GPIO01 Serial RXD and Optional sensor GPI8_ARIRFSEL, // GPIO02 RF receiver control GPI8_USER, // GPIO03 Serial TXD and Optional sensor GPI8_ARIRFRCV, // GPIO04 IR or RF receiver (optional) GPI8_PWM1, // GPIO05 RGB LED Red // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) // GPIO09 (SD_DATA2 Flash QIO or ESP8285) // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPI8_PWM2, // GPIO12 RGB LED Green GPI8_PWM3, // GPIO13 RGB LED Blue GPI8_USER, // GPIO14 RGBW LED White (optional - set to PWM4 for Cold White or Warm White) 0, 0, 0 }, { // ARILUX_LC11 - Arilux AL-LC11 (ESP8266) // https://www.banggood.com/nl/ARILUX-AL-LC11-Super-Mini-LED-WIFI-APP-Controller-RF-Remote-Control-For-RGBWW-LED-Strip-DC9-28V-p-1085112.html // (PwmFrequency 540Hz) GPI8_KEY1, // GPIO00 Optional Button GPI8_USER, // GPIO01 Serial RXD and Optional sensor GPI8_ARIRFSEL, // GPIO02 RF receiver control GPI8_USER, // GPIO03 Serial TXD and Optional sensor GPI8_PWM2, // GPIO04 RGB LED Green GPI8_PWM1, // GPIO05 RGB LED Red // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) // GPIO09 (SD_DATA2 Flash QIO or ESP8285) // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPI8_PWM5, // GPIO12 RGBCW LED Warm GPI8_PWM4, // GPIO13 RGBW LED Cold GPI8_PWM3, // GPIO14 RGB LED Blue GPI8_ARIRFRCV, // GPIO15 RF receiver input 0, 0 }, { // ARILUX_LC06 - Arilux AL-LC06 (ESP8285) // https://www.banggood.com/ARILUX-AL-LC06-LED-WIFI-Smartphone-Controller-Romote-5-Channels-DC12-24V-For-RGBWW-Strip-light-p-1061476.html GPI8_KEY1, // GPIO00 Optional Button GPI8_USER, // GPIO01 Serial RXD and Optional sensor GPI8_USER, // GPIO02 Empty pad GPI8_USER, // GPIO03 Serial TXD and Optional sensor GPI8_USER, // GPIO04 W2 - PWM5 0, // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) // GPIO09 (SD_DATA2 Flash QIO or ESP8285) // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPI8_PWM2, // GPIO12 RGB LED Green GPI8_PWM3, // GPIO13 RGB LED Blue GPI8_PWM1, // GPIO14 RGB LED Red GPI8_USER, // GPIO15 RGBW LED White 0, 0 }, { // ZENGGE_ZF_WF017 - Zenggee ZJ-WF017-A (ESP12S)) // https://www.ebay.com/p/Smartphone-Android-IOS-WiFi-Music-Controller-for-RGB-5050-3528-LED-Strip-Light/534446632?_trksid=p2047675.l2644 GPI8_KEY1, // GPIO00 Optional Button 0, GPI8_USER, // GPIO02 Empty pad 0, GPI8_USER, // GPIO04 W2 - PWM5 0, // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) // GPIO09 (SD_DATA2 Flash QIO or ESP8285) // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPI8_PWM2, // GPIO12 RGB LED Green GPI8_PWM1, // GPIO13 RGB LED Red GPI8_PWM3, // GPIO14 RGB LED Blue 0, 0, 0 }, { // SONOFF_POW_R2 - Sonoff Pow R2 (ESP8285 - CSE7766) GPI8_KEY1, // GPIO00 Button GPI8_CSE7766_TX, // GPIO01 Serial RXD 4800 baud 8E1 CSE7766 energy sensor 0, GPI8_CSE7766_RX, // GPIO03 Serial TXD 0, 0, // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) // GPIO09 (SD_DATA2 Flash QIO or ESP8285) // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPI8_REL1, // GPIO12 Red Led and Relay (0 = Off, 1 = On) GPI8_LED1_INV, // GPIO13 Blue Led (0 = On, 1 = Off) - Link and Power status 0, 0, 0, 0 }, { // BLITZWOLF_BWSHP - BlitzWolf BW-SHP2 and BW-SHP6 (ESP8285 - BL0937 or HJL-01 Energy Monitoring) // https://www.banggood.com/BlitzWolf-BW-SHP2-Smart-WIFI-Socket-EU-Plug-220V-16A-Work-with-Amazon-Alexa-Google-Assistant-p-1292899.html // https://www.amazon.de/Steckdose-Homecube-intelligente-Verbrauchsanzeige-funktioniert/dp/B076Q2LKHG/ref=sr_1_fkmr0_1 // https://www.amazon.de/Intelligente-Stromverbrauch-Fernsteurung-Schaltbare-Energieklasse/dp/B076WZQS4S/ref=sr_1_1 // https://www.aliexpress.com/store/product/BlitzWolf-BW-SHP6-EU-Plug-Metering-Version-WIFI-Smart-Socket-220V-240V-10A-Work-with-Amazon/1965360_32945504669.html GPI8_LED1_INV, // GPIO00 Red Led (1 = On, 0 = Off) - Power status GPI8_USER, // GPIO01 Serial RXD and Optional sensor GPI8_LEDLNK_INV, // GPIO02 Blue Led (1 = On, 0 = Off) - Link status GPI8_USER, // GPIO03 Serial TXD and Optional sensor 0, GPI8_HJL_CF, // GPIO05 BL0937 or HJL-01 CF power // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) // GPIO09 (SD_DATA2 Flash QIO or ESP8285) // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPI8_NRG_SEL_INV, // GPIO12 BL0937 or HJL-01 Sel output (0 = Voltage) GPI8_KEY1, // GPIO13 Button GPI8_NRG_CF1, // GPIO14 BL0937 or HJL-01 CF1 current / voltage GPI8_REL1, // GPIO15 Relay (0 = Off, 1 = On) 0, 0 }, { // SHELLY1 - Shelly1 Open Source (ESP8266 - 2MB) - https://shelly.cloud/shelly1-open-source/ GPI8_USER, // GPIO00 - Can be changed to GPI8_USER, only if Shelly is powered with 12V DC GPI8_USER, // GPIO01 Serial RXD - Can be changed to GPI8_USER, only if Shelly is powered with 12V DC 0, GPI8_USER, // GPIO03 Serial TXD - Can be changed to GPI8_USER, only if Shelly is powered with 12V DC GPI8_REL1, // GPIO04 Relay (0 = Off, 1 = On) GPI8_SWT1_NP, // GPIO05 SW pin // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) // GPIO09 (SD_DATA2 Flash QIO or ESP8285) // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) 0, 0, 0, 0, 0, 0 }, { // SHELLY2 - Shelly2 (ESP8266 - 2MB) - https://shelly.cloud/shelly2/ 0, GPI8_MCP39F5_TX, // GPIO01 MCP39F501 Serial input 0, GPI8_MCP39F5_RX, // GPIO03 MCP39F501 Serial output GPI8_REL1, // GPIO04 GPI8_REL2, // GPIO05 // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) // GPIO09 (SD_DATA2 Flash QIO or ESP8285) // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPI8_SWT1, // GPIO12 0, GPI8_SWT2, // GPIO14 GPI8_MCP39F5_RST, // GPIO15 MCP39F501 Reset 0, 0 }, { // PHILIPS - Xiaomi Philips bulb (ESP8266) 0, 0, 0, 0, 0, 0, // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) // GPIO09 (SD_DATA2 Flash QIO or ESP8285) // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPI8_PWM2, // GPIO12 cold/warm light 0, 0, GPI8_PWM1, // GPIO15 light intensity 0, 0 }, { // NEO_COOLCAM - Neo Coolcam (ESP8266) // https://www.banggood.com/NEO-COOLCAM-WiFi-Mini-Smart-Plug-APP-Remote-Control-Timing-Smart-Socket-EU-Plug-p-1288562.html?cur_warehouse=CN 0, 0, 0, 0, GPI8_LED1_INV, // GPIO04 Red Led (0 = On, 1 = Off) - Link and Power status 0, // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) // GPIO09 (SD_DATA2 Flash QIO or ESP8285) // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPI8_REL1, // GPIO12 Red Led and Relay (0 = Off, 1 = On) GPI8_KEY1, // GPIO13 Button 0, 0, 0, 0 }, { // ESP_SWITCH - Michael Haustein 4 channel wall switch (ESP07 = ESP8266) // Use rules for further actions like - rule on power1#state do publish cmnd/other_device/power %value% endon GPI8_KEY2, // GPIO00 Button 2 GPI8_USER, // GPIO01 Serial RXD and Optional sensor GPI8_REL3_INV, // GPIO02 Yellow Led 3 (0 = On, 1 = Off) GPI8_USER, // GPIO03 Serial TXD and Optional sensor GPI8_KEY1, // GPIO04 Button 1 GPI8_REL2_INV, // GPIO05 Red Led 2 (0 = On, 1 = Off) // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) // GPIO09 (SD_DATA2 Flash QIO or ESP8285) // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPI8_REL4_INV, // GPIO12 Blue Led 4 (0 = On, 1 = Off) GPI8_KEY4, // GPIO13 Button 4 GPI8_KEY3, // GPIO14 Button 3 GPI8_LED1, // GPIO15 Optional sensor GPI8_REL1_INV, // GPIO16 Green Led 1 (0 = On, 1 = Off) 0 }, { // OBI - OBI socket (ESP8266) - https://www.obi.de/hausfunksteuerung/wifi-stecker-schuko/p/2291706 GPI8_USER, // GPIO00 GPI8_USER, // GPIO01 Serial RXD 0, GPI8_USER, // GPIO03 Serial TXD GPI8_LED1, // GPIO04 Blue LED - Link and Power status GPI8_REL1, // GPIO05 (Relay OFF, but used as Relay Switch) // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) // GPIO09 (SD_DATA2 Flash QIO or ESP8285) // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPI8_LED3, // GPIO12 (Relay ON, but set to LOW, so we can switch with GPIO05) GPI8_USER, // GPIO13 GPI8_KEY1, // GPIO14 Button 0, GPI8_USER, // GPIO16 GPI8_USER // ADC0 A0 Analog input }, { // TECKIN - https://www.amazon.de/gp/product/B07D5V139R 0, GPI8_KEY1, // GPIO01 Serial TXD and Button 0, GPI8_LED1_INV, // GPIO03 Serial RXD and Red Led (0 = On, 1 = Off) - Power status GPI8_HJL_CF, // GPIO04 BL0937 or HJL-01 CF power GPI8_NRG_CF1, // GPIO05 BL0937 or HJL-01 CF1 current / voltage // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) // GPIO09 (SD_DATA2 Flash QIO or ESP8285) // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPI8_NRG_SEL_INV, // GPIO12 BL0937 or HJL-01 Sel output (0 = Voltage) GPI8_LEDLNK_INV, // GPIO13 Blue Led (0 = On, 1 = Off) - Link status GPI8_REL1, // GPIO14 Relay (0 = Off, 1 = On) 0, 0, 0 }, { // APLIC_WDP303075 - Aplic WDP 303075 (ESP8285 - HLW8012 Energy Monitoring) // https://www.amazon.de/dp/B07CNWVNJ2 0, 0, 0, GPI8_KEY1, // GPIO03 Button GPI8_HLW_CF, // GPIO04 HLW8012 CF power GPI8_NRG_CF1, // GPIO05 HLW8012 CF1 current / voltage // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) // GPIO09 (SD_DATA2 Flash QIO or ESP8285) // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPI8_NRG_SEL_INV, // GPIO12 HLW8012 CF Sel output (0 = Voltage) GPI8_LED1_INV, // GPIO13 LED (0 = On, 1 = Off) - Link and Power status GPI8_REL1, // GPIO14 Relay SRU 5VDC SDA (0 = Off, 1 = On ) 0, 0, 0 }, { // TUYA_DIMMER - Tuya MCU device (ESP8266 w/ separate MCU) // https://www.amazon.com/gp/product/B07CTNSZZ8/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1 GPI8_USER, // Virtual Button (controlled by MCU) GPI8_USER, // GPIO01 MCU serial control GPI8_USER, GPI8_USER, // GPIO03 MCU serial control GPI8_USER, GPI8_USER, // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) // GPIO09 (SD_DATA2 Flash QIO or ESP8285) // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPI8_USER, GPI8_USER, GPI8_USER, // GPIO14 Green Led GPI8_USER, GPI8_USER, 0 }, { // GOSUND - https://www.amazon.de/gp/product/B0777BWS1P 0, GPI8_LEDLNK_INV, // GPIO01 Serial RXD and LED1 (blue) inv - Link status 0, GPI8_KEY1, // GPIO03 Serial TXD and Button GPI8_HJL_CF, // GPIO04 BL0937 or HJL-01 CF power GPI8_NRG_CF1, // GPIO05 BL0937 or HJL-01 CF1 current / voltage // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) // GPIO09 (SD_DATA2 Flash QIO or ESP8285) // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPI8_NRG_SEL_INV, // GPIO12 BL0937 or HJL-01 Sel output (0 = Voltage) GPI8_LED1_INV, // GPIO13 LED2 (red) inv - Power status GPI8_REL1, // GPIO14 Relay (0 = Off, 1 = On) 0, 0, 0 }, { // ARMTRONIX_DIMMERS - ARMTRONIX Dimmer, one or two channel (ESP8266 w/ separate MCU dimmer) // https://www.tindie.com/products/Armtronix/wifi-ac-dimmer-two-triac-board/ // https://www.tindie.com/products/Armtronix/wifi-ac-dimmer-esp8266-one-triac-board-alexaecho/ GPI8_USER, GPI8_TXD, // GPIO01 MCU serial control GPI8_USER, GPI8_RXD, // GPIO03 MCU serial control GPI8_USER, GPI8_USER, // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) // GPIO09 (SD_DATA2 Flash QIO or ESP8285) // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPI8_USER, GPI8_USER, GPI8_USER, GPI8_USER, GPI8_USER, 0 }, { // SK03_TUYA - Outdoor smart plug with power monitoring HLW8012 chip - https://www.amazon.com/gp/product/B07CG7MBPV GPI8_KEY1, // GPIO00 Button 0, 0, 0, GPI8_HLW_CF, // GPIO04 HLW8012 CF power GPI8_NRG_CF1, // GPIO05 HLW8012 CF1 current / voltage // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) // GPIO09 (SD_DATA2 Flash QIO or ESP8285) // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPI8_NRG_SEL_INV, // GPIO12 HLW8012 CF Sel output (0 = Voltage) GPI8_LED1_INV, // GPIO13 Red Led (0 = On, 1 = Off) - Power status GPI8_LEDLNK_INV, // GPIO14 Blue Led (0 = On, 1 = Off) - Link status GPI8_REL1, // GPIO15 Relay (0 = Off, 1 = On) 0, 0 }, { // PS_16_DZ - PS-16-DZ Dimmer (ESP8266 w/ separate Nuvoton MCU dimmer) // https://www.aliexpress.com/item/SM-Smart-WIFI-Wall-Dimmer-Light-Switch-US-Ewelink-APP-Remote-Control-Wi-Fi-Wirele-Work/32871151902.html GPI8_USER, GPI8_TXD, // GPIO01 MCU serial control GPI8_USER, GPI8_RXD, // GPIO03 MCU serial control GPI8_USER, GPI8_USER, // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) // GPIO09 (SD_DATA2 Flash QIO or ESP8285) // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPI8_USER, GPI8_LED1, // GPIO13 WiFi LED - Link and Power status GPI8_USER, GPI8_USER, GPI8_USER, 0 }, { // TECKIN_US - Teckin SP20 US with Energy Monitoring // https://www.amazon.com/Outlet-Compatible-Monitoring-Function-Required/dp/B079Q5W22B // https://www.amazon.com/Outlet-ZOOZEE-Monitoring-Function-Compatible/dp/B07J2LR5KN GPI8_LED1_INV, // GPIO00 Red Led (1 = On, 0 = Off) - Power status 0, GPI8_LEDLNK_INV, // GPIO02 Blue Led (1 = On, 0 = Off) - Link status 0, GPI8_REL1, // GPIO04 Relay (0 = Off, 1 = On) GPI8_HJL_CF, // GPIO05 BL0937 or HJL-01 CF power // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) // GPIO09 (SD_DATA2 Flash QIO or ESP8285) // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPI8_NRG_SEL_INV, // GPIO12 BL0937 or HJL-01 Sel output (0 = Voltage) GPI8_KEY1, // GPIO13 Button GPI8_NRG_CF1, // GPIO14 BL0937 or HJL-01 CF1 current / voltage 0, 0, 0 }, { // MANZOKU_EU_4 - "MANZOKU" labeled power strip, EU version // https://www.amazon.de/Steckdosenleiste-AOFO-Mehrfachsteckdose-Ãœberspannungsschutz-Sprachsteuerung/dp/B07GBSD11P/ // https://www.amazon.de/Steckdosenleiste-Geekbes-USB-Anschluss-Kompatibel-gesteuert/dp/B078W23BW9/ 0, // GPIO00 0, // GPIO01 Serial RXD 0, GPI8_KEY1, // GPIO03 Serial TXD + Button GPI8_REL2, // GPIO04 Relay 2 GPI8_REL1, // GPIO05 Relay 1 // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) // GPIO09 (SD_DATA2 Flash QIO or ESP8285) // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPI8_REL3, // GPIO12 Relay 3 GPI8_REL4, // GPIO13 Relay 4 GPI8_USER, // GPIO14 0, GPI8_USER, // GPIO16 0 }, { // OBI2 - OBI socket (ESP8266) - https://www.obi.de/hausfunksteuerung/wifi-stecker-schuko-2-stueck-weiss/p/4077673 0, // GPIO00 0, // GPIO01 Serial RXD 0, 0, // GPIO03 Serial TXD GPI8_REL1, // GPIO04 Relay 1 GPI8_KEY1, // GPIO05 Button // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) // GPIO09 (SD_DATA2 Flash QIO or ESP8285) // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPI8_LEDLNK_INV, // GPIO12 Green LED - Link status GPI8_LED1, // GPIO13 Red LED - Power status 0, 0, 0, 0 }, { // YTF_IR_BRIDGE - https://www.aliexpress.com/item/Tuya-universal-Smart-IR-Hub-remote-control-Voice-Control-AC-TV-Work-With-Alexa-Google-Home/32951202513.html GPI8_USER, // GPIO00 GPI8_USER, // GPIO01 Serial RXD GPI8_USER, // GPIO02 GPI8_USER, // GPIO03 Serial TXD GPI8_LED1_INV, // GPIO04 Blue Led - Link status GPI8_IRRECV, // GPIO05 IR Receiver // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) // GPIO09 (SD_DATA2 Flash QIO or ESP8285) // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) 0, // GPIO12 GPI8_KEY1, // GPIO13 Button GPI8_IRSEND, // GPIO14 IR Transmitter 0, 0, 0 }, { // DIGOO - Digoo DG-SP202 // https://www.banggood.com/DIGOO-DG-SP202-Dual-EU-Plug-Smart-WIFI-Socket-Individual-Controllable-Energy-Monitor-Remote-Control-Timing-Smart-Home-Outlet-let-p-1375323.html GPI8_KEY1, // GPIO00 Button1 0, // GPIO01 Serial RXD 0, // GPIO02 0, // GPIO03 Serial TXD GPI8_HJL_CF, // GPIO04 BL0937 or HJL-01 CF power GPI8_NRG_CF1, // GPIO05 BL0937 or HJL-01 CF1 current / voltage // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) // GPIO09 (SD_DATA2 Flash QIO or ESP8285) // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPI8_NRG_SEL_INV, // GPIO12 BL0937 or HJL-01 Sel output (0 = Voltage) GPI8_LED1, // GPIO13 Blue Leds - Link Status GPI8_REL2, // GPIO14 Relay2 (0 = Off, 1 = On) and Red Led GPI8_REL1, // GPIO15 Relay1 (0 = Off, 1 = On) and Red Led GPI8_KEY2_NP, // GPIO16 Button2, externally pulled up 0 }, { // KA10 - SMANERGY KA10 (ESP8285 - BL0937 Energy Monitoring) - https://www.amazon.es/dp/B07MBTCH2Y 0, // GPIO00 GPI8_LEDLNK_INV, // GPIO01 Blue LED - Link status 0, // GPIO02 GPI8_KEY1, // GPIO03 Button GPI8_HJL_CF, // GPIO04 BL0937 CF power GPI8_NRG_CF1, // GPIO05 BL0937 CF1 voltage / current // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) // GPIO09 (SD_DATA2 Flash QIO or ESP8285) // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPI8_NRG_SEL_INV, // GPIO12 BL0937 Sel output (1 = Voltage) GPI8_LED1, // GPIO13 Red LED - Power status GPI8_REL1, // GPIO14 Relay 1 0, 0, 0 }, { // ZX2820 GPI8_KEY1, // GPIO00 Button 0, 0, 0, GPI8_HLW_CF, // GPIO04 HLW8012 CF power GPI8_NRG_CF1, // GPIO05 HLW8012 CF1 voltage / current // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) // GPIO09 (SD_DATA2 Flash QIO or ESP8285) // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPI8_NRG_SEL_INV, // GPIO12 HLW8012 SEL (0 = Voltage) GPI8_LED1_INV, // GPIO13 Green Led - Link and Power status GPI8_REL1, // GPIO14 Relay 0, 0, 0 }, { // MI_DESK_LAMP - Mi LED Desk Lamp - https://www.mi.com/global/smartlamp/ 0, 0, GPI8_KEY1, // GPIO02 Button 0, GPI8_PWM1, // GPIO04 Cold White GPI8_PWM2, // GPIO05 Warm White // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) // GPIO09 (SD_DATA2 Flash QIO or ESP8285) // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPI8_ROT1A, // GPIO12 Rotary switch A pin GPI8_ROT1B, // GPIO13 Rotary switch B pin 0, 0, 0, 0 }, { // SP10 - Tuya SP10 (BL0937 Energy Monitoring) // https://www.aliexpress.com/item/Smart-Mini-WiFi-Plug-Outlet-Switch-Work-With-ForEcho-Alexa-Google-Home-Remote-EU-Smart-Socket/32963670423.html 0, // GPIO00 GPI8_PWM1, // GPIO01 Nightlight 0, // GPIO02 GPI8_KEY1, // GPIO03 Button GPI8_HJL_CF, // GPIO04 BL0937 CF power GPI8_NRG_CF1, // GPIO05 BL0937 CF1 voltage / current // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) // GPIO09 (SD_DATA2 Flash QIO or ESP8285) // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPI8_NRG_SEL_INV, // GPIO12 BL0937 Sel output (1 = Voltage) GPI8_LED1, // GPIO13 Blue LED - Link status GPI8_REL1, // GPIO14 Relay and red LED 0, 0, 0 }, { // WAGA - WAGA life CHCZ02MB (HJL-01 Energy Monitoring) // https://www.ebay.com/itm/332595697006 GPI8_LED1_INV, // GPIO00 Red LED 0, // GPIO01 Serial RXD 0, // GPIO02 GPI8_NRG_SEL_INV, // GPIO03 HJL-01 Sel output (1 = Voltage) 0, // GPIO04 GPI8_HJL_CF, // GPIO05 HJL-01 CF power // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) // GPIO09 (SD_DATA2 Flash QIO or ESP8285) // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPI8_REL1, // GPIO12 Relay GPI8_KEY1, // GPIO13 Button GPI8_NRG_CF1, // GPIO14 HJL-01 CF1 voltage / current GPI8_LEDLNK_INV, // GPIO15 Blue LED - Link status 0, 0 }, { // SYF05 - Sunyesmart SYF05 (a.k.a. Fcmila) = TYWE3S + SM16726 // Also works with Merkury 904 RGBW Bulbs with 13 set to GPI8_SM16716_SEL // https://www.flipkart.com/fc-mila-bxav-xs-ad-smart-bulb/p/itmf85zgs45fzr7n // https://docs.tuya.com/en/hardware/WiFi-module/wifi-e3s-module.html // http://www.datasheet-pdf.com/PDF/SM16716-Datasheet-Sunmoon-932771 GPI8_USER, // GPIO00 N.C. 0, // GPIO01 Serial RXD GPI8_USER, // GPIO02 N.C. 0, // GPIO03 Serial TXD GPI8_SM16716_CLK, // GPIO04 SM16716 Clock GPI8_PWM1, // GPIO05 White // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) // GPIO09 (SD_DATA2 Flash QIO or ESP8285) // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPI8_USER, // GPIO12 Alt. White on some devices GPI8_USER, // GPIO13 SM16716 Enable on some devices GPI8_SM16716_DAT, // GPIO14 SM16716 Data 0, // GPIO15 wired to GND GPI8_USER, // GPIO16 N.C. GPI8_USER // ADC0 A0 Analog input }, { // EXS_DIMMER - EX-Store WiFi Dimmer v4, two channel (ESP8266 w/ separate MCU dimmer) // https://ex-store.de/2-Kanal-RS232-WiFi-WLan-Dimmer-Modul-V4-fuer-Unterputzmontage-230V-3A // https://ex-store.de/2-Kanal-RS232-WiFi-WLan-Dimmer-Modul-V4-fuer-Unterputzmontage-230V-3A-ESP8266-V12-Stift-und-Buchsenleisten 0, GPI8_TXD, // GPIO01 MCU serial control GPI8_LEDLNK, // GPIO02 LED Link GPI8_RXD, // GPIO03 MCU serial control GPI8_USER, // GPIO04 GPI8_USER, // GPIO05 // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) // GPIO09 (SD_DATA2 Flash QIO or ESP8285) // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPI8_USER, // GPIO12 GPI8_EXS_ENABLE, // GPIO13 EXS MCU Enable GPI8_USER, // GPIO14 0, // GPIO15 0, 0 }, { // PWM_DIMMER - Support for Martin Jerry/acenx/Tessan/NTONPOWER SD0x PWM // dimmer switches. The brightness of the load for these dimmers is // controlled by a PWM GPIO pin. There are typically power, up & down // buttons and 4 LED's. Examples are: // https://www.amazon.com/dp/B07FXYSVR1 // https://www.amazon.com/dp/B07V26Q3VD // https://www.amazon.com/dp/B07K67D43J // https://www.amazon.com/dp/B07TTGFWFM GPI8_KEY3, // GPIO00 Up button GPI8_KEY2, // GPIO01 Down button 0, // GPIO02 GPI8_LED4_INV, // GPIO03 Level 5 LED GPI8_LEDLNK_INV, // GPIO04 LED Link GPI8_LED3_INV, // GPIO05 Level 4 LED // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) // GPIO09 (SD_DATA2 Flash QIO or ESP8285) // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPI8_LED2_INV, // GPIO12 Level 3 LED GPI8_PWM1, // GPIO13 Dimmer PWM GPI8_LED1_INV, // GPIO12 Level 2 LED GPI8_KEY1_INV, // GPIO15 Power button GPI8_REL1_INV, // GPIO16 Power relay/Level 1 LED 0 }, { // SONOFF_ZB_BRIDGE - Sonoff Zigbee Bridge (ESP8266) GPI8_LED1_INV, // GPIO00 Green Led (0 = On, 1 = Off) - Traffic between ESP and EFR GPI8_ZIGBEE_TX, // GPIO01 Zigbee Serial control 0, // GPIO02 GPI8_ZIGBEE_RX, // GPIO03 Zigbee Serial control GPI8_ZIGBEE_RST, // GPIO04 Zigbee Reset 0, // GPIO05 EFR32 Bootloader mode (drive Low for Gecko Bootloader, inactive or high for Zigbee EmberZNet) // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) // GPIO09 (SD_DATA2 Flash QIO or ESP8285) // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPI8_I2C_SDA, // GPIO12 I2C SDA - connected to 512KB EEPROM GPI8_LEDLNK_INV, // GPIO13 Blue Led (0 = On, 1 = Off) - Link status GPI8_I2C_SCL, // GPIO14 I2C SCL - connected to 512KB EEPROM 0, // GPIO15 connected to IO15 pad, also used for logging GPI8_KEY1, // GPIO16 Button 0 } }; /*********************************************************************************************\ * Templates with 14 usable pins (ESP8285) \*********************************************************************************************/ const mytmplt8285 kModules8285[TMP_MAXMODULE_8266 - TMP_WEMOS] PROGMEM = { { // WEMOS - Any ESP8266/ESP8285 device like WeMos and NodeMCU hardware (ESP8266) GPI8_USER, // GPIO00 D3 Wemos Button Shield GPI8_USER, // GPIO01 TX Serial RXD GPI8_USER, // GPIO02 D4 Wemos DHT Shield GPI8_USER, // GPIO03 RX Serial TXD and Optional sensor GPI8_USER, // GPIO04 D2 Wemos I2C SDA GPI8_USER, // GPIO05 D1 Wemos I2C SCL / Wemos Relay Shield (0 = Off, 1 = On) / Wemos WS2812B RGB led Shield // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) GPI8_USER, // GPIO09 (SD_DATA2 Flash QIO or ESP8285) GPI8_USER, // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPI8_USER, // GPIO12 D6 GPI8_USER, // GPIO13 D7 GPI8_USER, // GPIO14 D5 GPI8_USER, // GPIO15 D8 GPI8_USER, // GPIO16 D0 Wemos Wake GPI8_USER // ADC0 A0 Analog input }, { // SONOFF_4CH - Sonoff 4CH (ESP8285) GPI8_KEY1, // GPIO00 Button 1 GPI8_USER, // GPIO01 Serial RXD and Optional sensor GPI8_USER, // GPIO02 Optional sensor GPI8_USER, // GPIO03 Serial TXD and Optional sensor GPI8_REL3, // GPIO04 Sonoff 4CH Red Led and Relay 3 (0 = Off, 1 = On) GPI8_REL2, // GPIO05 Sonoff 4CH Red Led and Relay 2 (0 = Off, 1 = On) // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) GPI8_KEY2, // GPIO09 Button 2 GPI8_KEY3, // GPIO10 Button 3 // GPIO11 (SD_CMD Flash) GPI8_REL1, // GPIO12 Red Led and Relay 1 (0 = Off, 1 = On) - Link and Power status GPI8_LED1_INV, // GPIO13 Blue Led (0 = On, 1 = Off) GPI8_KEY4, // GPIO14 Button 4 GPI8_REL4, // GPIO15 Red Led and Relay 4 (0 = Off, 1 = On) 0, 0 }, { // SONOFF_T12 - Sonoff T1 2CH (ESP8285) GPI8_KEY1, // GPIO00 Button 1 GPI8_USER, // GPIO01 Serial RXD and Optional sensor GPI8_USER, // GPIO02 Optional Sensor (J3 Pin 5) GPI8_USER, // GPIO03 Serial TXD and Optional sensor 0, GPI8_REL2, // GPIO05 Blue Led and Relay 2 (0 = Off, 1 = On) // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) GPI8_KEY2, // GPIO09 Button 2 0, // GPIO10 // GPIO11 (SD_CMD Flash) GPI8_REL1, // GPIO12 Blue Led and Relay 1 (0 = Off, 1 = On) GPI8_LED1_INV, // GPIO13 Blue Led (0 = On, 1 = Off) - Link and Power status 0, 0, 0, 0 }, { // SONOFF_T13 - Sonoff T1 3CH (ESP8285) GPI8_KEY1, // GPIO00 Button 1 GPI8_USER, // GPIO01 Serial RXD and Optional sensor GPI8_USER, // GPIO02 Optional Sensor (J3 Pin 5) GPI8_USER, // GPIO03 Serial TXD and Optional sensor GPI8_REL3, // GPIO04 Blue Led and Relay 3 (0 = Off, 1 = On) GPI8_REL2, // GPIO05 Blue Led and Relay 2 (0 = Off, 1 = On) // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) GPI8_KEY2, // GPIO09 Button 2 GPI8_KEY3, // GPIO10 Button 3 // GPIO11 (SD_CMD Flash) GPI8_REL1, // GPIO12 Blue Led and Relay 1 (0 = Off, 1 = On) GPI8_LED1_INV, // GPIO13 Blue Led (0 = On, 1 = Off) - Link and Power status 0, 0, 0, 0 }, { // SONOFF_DUAL_R2 - Sonoff Dual R2 (ESP8285) GPI8_USER, // GPIO00 Button 0 on header (0 = On, 1 = Off) GPI8_USER, // GPIO01 Serial RXD and Optional sensor 0, GPI8_USER, // GPIO03 Serial TXD and Optional sensor 0, GPI8_REL2, // GPIO05 Relay 2 (0 = Off, 1 = On) // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) GPI8_USER, // GPIO09 Button 1 on header (0 = On, 1 = Off) GPI8_KEY1, // GPIO10 Button on casing // GPIO11 (SD_CMD Flash) GPI8_REL1, // GPIO12 Relay 1 (0 = Off, 1 = On) GPI8_LED1_INV, // GPIO13 Blue Led (0 = On, 1 = Off) - Link and Power status 0, 0, 0, 0 }, { // SONOFF_IFAN03 - Sonoff iFan03 (ESP8285) GPI8_KEY1, // GPIO00 WIFI_KEY0 Button 1 GPI8_TXD, // GPIO01 ESP_TXD Serial RXD connection to P0.5 of RF microcontroller 0, // GPIO02 ESP_LOG GPI8_RXD, // GPIO03 ESP_RXD Serial TXD connection to P0.4 of RF microcontroller 0, // GPIO04 DEBUG_RX 0, // GPIO05 DEBUG_TX // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) GPI8_REL1_INV, // GPIO09 WIFI_O0 Relay 1 (0 = Off, 1 = On) controlling the light GPI8_BUZZER_INV, // GPIO10 WIFI_O4 Buzzer (0 = Off, 1 = On) // GPIO11 (SD_CMD Flash) GPI8_REL3, // GPIO12 WIFI_O2 Relay 3 (0 = Off, 1 = On) controlling the fan GPI8_LED1_INV, // GPIO13 WIFI_CHK Blue Led on PCA (0 = On, 1 = Off) - Link and Power status GPI8_REL2, // GPIO14 WIFI_O1 Relay 2 (0 = Off, 1 = On) controlling the fan GPI8_REL4, // GPIO15 WIFI_O3 Relay 4 (0 = Off, 1 = On) controlling the fan 0, 0 } }; #endif // ESP8266 #ifdef ESP32 /********************************************************************************************\ * ESP32 Module templates \********************************************************************************************/ #define USER_MODULE 255 // Supported hardware modules enum SupportedModules { WEMOS, ESP32_CAM_AITHINKER, ODROID_GO, ESP32_SOLO, WT32_ETH01, TTGO_WATCH, M5STACK_CORE2, MAXMODULE }; // Default module settings const uint8_t kModuleNiceList[] PROGMEM = { WEMOS, #ifdef USE_WEBCAM ESP32_CAM_AITHINKER, #endif // USE_WEBCAM #ifdef USE_ODROID_GO ODROID_GO, #endif // USE_ODROID_GO #ifdef USE_ESP32_SOLO // ESP32_SOLO, // To be defined #endif // USE_ESP32_SOLO #ifdef USE_WT32_ETH01 WT32_ETH01, #endif // USE_WT32_ETH01 #ifdef USE_TTGO_WATCH // TTGO_WATCH, // To be defined #endif // USE_TTGO_WATCH #ifdef USE_M5STACK_CORE2 M5STACK_CORE2, #endif // USE_M5STACK_CORE2 }; const char kModuleNames[] PROGMEM = "ESP32-DevKit|" #ifdef USE_WEBCAM "ESP32-Cam|" #endif // USE_WEBCAM #ifdef USE_ODROID_GO "Odroid Go|" #endif // USE_ODROID_GO #ifdef USE_ESP32_SOLO // "ESP32-Solo|" // To be defined #endif // USE_ESP32_SOLO #ifdef USE_WT32_ETH01 "WT32-Eth01|" #endif // USE_WT32_ETH01 #ifdef USE_TTGO_WATCH // "TTGO Watch|" // To be defined #endif // USE_TTGO_WATCH #ifdef USE_M5STACK_CORE2 "M5Stack Core2|" #endif // USE_M5STACK_CORE2 ; const mytmplt kModules[] PROGMEM = { { // WEMOS - Espressif ESP32-DevKitC - Any ESP32 device like WeMos and NodeMCU hardware (ESP32) AGPIO(GPIO_USER), // 0 (I)O GPIO0, ADC2_CH1, TOUCH1, RTC_GPIO11, CLK_OUT1, EMAC_TX_CLK AGPIO(GPIO_USER), // 1 IO TXD0 GPIO1, U0TXD, CLK_OUT3, EMAC_RXD2 AGPIO(GPIO_USER), // 2 IO GPIO2, ADC2_CH2, TOUCH2, RTC_GPIO12, HSPIWP, HS2_DATA0, SD_DATA0 AGPIO(GPIO_USER), // 3 IO RXD0 GPIO3, U0RXD, CLK_OUT2 AGPIO(GPIO_USER), // 4 IO GPIO4, ADC2_CH0, TOUCH0, RTC_GPIO10, HSPIHD, HS2_DATA1, SD_DATA1, EMAC_TX_ER AGPIO(GPIO_USER), // 5 IO GPIO5, VSPICS0, HS1_DATA6, EMAC_RX_CLK // 6 IO GPIO6, Flash CLK // 7 IO GPIO7, Flash D0 // 8 IO GPIO8, Flash D1 AGPIO(GPIO_USER), // 9 IO GPIO9, Flash D2, U1RXD AGPIO(GPIO_USER), // 10 IO GPIO10, Flash D3, U1TXD // 11 IO GPIO11, Flash CMD AGPIO(GPIO_USER), // 12 (I)O GPIO12, ADC2_CH5, TOUCH5, RTC_GPIO15, MTDI, HSPIQ, HS2_DATA2, SD_DATA2, EMAC_TXD3 (If driven High, flash voltage (VDD_SDIO) is 1.8V not default 3.3V. Has internal pull-down, so unconnected = Low = 3.3V. May prevent flashing and/or booting if 3.3V flash is connected and pulled high. See ESP32 datasheet for more details.) AGPIO(GPIO_USER), // 13 IO GPIO13, ADC2_CH4, TOUCH4, RTC_GPIO14, MTCK, HSPID, HS2_DATA3, SD_DATA3, EMAC_RX_ER AGPIO(GPIO_USER), // 14 IO GPIO14, ADC2_CH6, TOUCH6, RTC_GPIO16, MTMS, HSPICLK, HS2_CLK, SD_CLK, EMAC_TXD2 AGPIO(GPIO_USER), // 15 (I)O GPIO15, ADC2_CH3, TOUCH3, MTDO, HSPICS0, RTC_GPIO13, HS2_CMD, SD_CMD, EMAC_RXD3 (If driven Low, silences boot messages from normal boot. Has internal pull-up, so unconnected = High = normal output.) AGPIO(GPIO_USER), // 16 IO GPIO16, HS1_DATA4, U2RXD, EMAC_CLK_OUT AGPIO(GPIO_USER), // 17 IO GPIO17, HS1_DATA5, U2TXD, EMAC_CLK_OUT_180 AGPIO(GPIO_USER), // 18 IO GPIO18, VSPICLK, HS1_DATA7 AGPIO(GPIO_USER), // 19 IO GPIO19, VSPIQ, U0CTS, EMAC_TXD0 0, // 20 AGPIO(GPIO_USER), // 21 IO GPIO21, VSPIHD, EMAC_TX_EN AGPIO(GPIO_USER), // 22 IO LED GPIO22, VSPIWP, U0RTS, EMAC_TXD1 AGPIO(GPIO_USER), // 23 IO GPIO23, VSPID, HS1_STROBE 0, // 24 AGPIO(GPIO_USER), // 25 IO GPIO25, DAC_1, ADC2_CH8, RTC_GPIO6, EMAC_RXD0 AGPIO(GPIO_USER), // 26 IO GPIO26, DAC_2, ADC2_CH9, RTC_GPIO7, EMAC_RXD1 AGPIO(GPIO_USER), // 27 IO GPIO27, ADC2_CH7, TOUCH7, RTC_GPIO17, EMAC_RX_DV 0, // 28 0, // 29 0, // 30 0, // 31 AGPIO(GPIO_USER), // 32 IO GPIO32, XTAL_32K_P (32.768 kHz crystal oscillator input), ADC1_CH4, TOUCH9, RTC_GPIO9 AGPIO(GPIO_USER), // 33 IO GPIO33, XTAL_32K_N (32.768 kHz crystal oscillator output), ADC1_CH5, TOUCH8, RTC_GPIO8 AGPIO(GPIO_USER), // 34 I NO PULLUP GPIO34, ADC1_CH6, RTC_GPIO4 AGPIO(GPIO_USER), // 35 I NO PULLUP GPIO35, ADC1_CH7, RTC_GPIO5 AGPIO(GPIO_USER), // 36 I NO PULLUP GPIO36, SENSOR_VP, ADC_H, ADC1_CH0, RTC_GPIO0 0, // 37 NO PULLUP 0, // 38 NO PULLUP AGPIO(GPIO_USER), // 39 I NO PULLUP GPIO39, SENSOR_VN, ADC1_CH3, ADC_H, RTC_GPIO3 0 // Flag }, #ifdef USE_WEBCAM { // ESP32_CAM_AITHINKER - Any ESP32 device with webcam (ESP32) AGPIO(GPIO_WEBCAM_XCLK), // 0 (I)O GPIO0, CAM_XCLK AGPIO(GPIO_USER), // 1 IO TXD0 GPIO1, U0TXD, CLK_OUT3, EMAC_RXD2 AGPIO(GPIO_USER), // 2 IO GPIO2, ADC2_CH2, TOUCH2, RTC_GPIO12, HSPIWP, HS2_DATA0, SD_DATA0 AGPIO(GPIO_USER), // 3 IO RXD0 GPIO3, U0RXD, CLK_OUT2 AGPIO(GPIO_USER), // 4 IO GPIO4, ADC2_CH0, TOUCH0, RTC_GPIO10, HSPIHD, HS2_DATA1, SD_DATA1, EMAC_TX_ER AGPIO(GPIO_WEBCAM_DATA), // 5 IO GPIO5, CAM_DATA1 // 6 IO GPIO6, Flash CLK // 7 IO GPIO7, Flash D0 // 8 IO GPIO8, Flash D1 AGPIO(GPIO_USER), // 9 IO GPIO9, Flash D2, U1RXD AGPIO(GPIO_USER), // 10 IO GPIO10, Flash D3, U1TXD // 11 IO GPIO11, Flash CMD AGPIO(GPIO_USER), // 12 (I)O GPIO12, ADC2_CH5, TOUCH5, RTC_GPIO15, MTDI, HSPIQ, HS2_DATA2, SD_DATA2, EMAC_TXD3 (If driven High, flash voltage (VDD_SDIO) is 1.8V not default 3.3V. Has internal pull-down, so unconnected = Low = 3.3V. May prevent flashing and/or booting if 3.3V flash is connected and pulled high. See ESP32 datasheet for more details.) AGPIO(GPIO_USER), // 13 IO GPIO13, ADC2_CH4, TOUCH4, RTC_GPIO14, MTCK, HSPID, HS2_DATA3, SD_DATA3, EMAC_RX_ER AGPIO(GPIO_USER), // 14 IO GPIO14, ADC2_CH6, TOUCH6, RTC_GPIO16, MTMS, HSPICLK, HS2_CLK, SD_CLK, EMAC_TXD2 AGPIO(GPIO_USER), // 15 (I)O GPIO15, ADC2_CH3, TOUCH3, MTDO, HSPICS0, RTC_GPIO13, HS2_CMD, SD_CMD, EMAC_RXD3 (If driven Low, silences boot messages from normal boot. Has internal pull-up, so unconnected = High = normal output.) AGPIO(GPIO_USER), // 16 IO GPIO16, HS1_DATA4, U2RXD, EMAC_CLK_OUT AGPIO(GPIO_USER), // 17 IO GPIO17, HS1_DATA5, U2TXD, EMAC_CLK_OUT_180 AGPIO(GPIO_WEBCAM_DATA) +1, // 18 IO GPIO18, CAM_DATA2 AGPIO(GPIO_WEBCAM_DATA) +2, // 19 IO GPIO19, CAM_DATA3 0, // 20 AGPIO(GPIO_WEBCAM_DATA) +3, // 21 IO GPIO21, CAM_DATA4 AGPIO(GPIO_WEBCAM_PCLK), // 22 IO LED GPIO22, CAM_PCLK AGPIO(GPIO_WEBCAM_HREF), // 23 IO GPIO23, CAM_HREF 0, // 24 AGPIO(GPIO_WEBCAM_VSYNC), // 25 IO GPIO25, CAM_VSYNC AGPIO(GPIO_WEBCAM_SIOD), // 26 IO GPIO26, CAM_SIOD AGPIO(GPIO_WEBCAM_SIOC), // 27 IO GPIO27, CAM_SIOC 0, // 28 0, // 29 0, // 30 0, // 31 AGPIO(GPIO_WEBCAM_PWDN), // 32 IO GPIO32, CAM_PWDN AGPIO(GPIO_USER), // 33 IO GPIO33, XTAL_32K_N (32.768 kHz crystal oscillator output), ADC1_CH5, TOUCH8, RTC_GPIO8 AGPIO(GPIO_WEBCAM_DATA) +6, // 34 I NO PULLUP GPIO34, CAM_DATA7 AGPIO(GPIO_WEBCAM_DATA) +7, // 35 I NO PULLUP GPIO35, CAM_DATA8 AGPIO(GPIO_WEBCAM_DATA) +4, // 36 I NO PULLUP GPIO36, CAM_DATA5 0, // 37 NO PULLUP 0, // 38 NO PULLUP AGPIO(GPIO_WEBCAM_DATA) +5, // 39 I NO PULLUP GPIO39, CAM_DATA6 0 // Flag }, #endif // USE_WEBCAM #ifdef USE_ODROID_GO { // ODROID_GO - (ESP32) AGPIO(GPIO_KEY1), // 0 (I)O GPIO0, BTN-VOLUME AGPIO(GPIO_TXD), // 1 IO TXD0 GPIO1, TXD0 AGPIO(GPIO_LEDLNK), // 2 IO GPIO2, STATUS LED AGPIO(GPIO_RXD), // 3 IO RXD0 GPIO3, RXD0 AGPIO(GPIO_USER), // 4 IO GPIO4, ADC2_CH0, TOUCH0, RTC_GPIO10, HSPIHD, HS2_DATA1, SD_DATA1, EMAC_TX_ER AGPIO(GPIO_ILI9341_CS), // 5 IO GPIO5, VSPI_CS0_LCD // 6 IO GPIO6, Flash CLK // 7 IO GPIO7, Flash D0 // 8 IO GPIO8, Flash D1 0, // 9 IO GPIO9, Flash D2, U1RXD 0, // 10 IO GPIO10, Flash D3, U1TXD // 11 IO GPIO11, Flash CMD AGPIO(GPIO_USER), // 12 (I)O GPIO12, ADC2_CH5, TOUCH5, RTC_GPIO15, MTDI, HSPIQ, HS2_DATA2, SD_DATA2, EMAC_TXD3 (If driven High, flash voltage (VDD_SDIO) is 1.8V not default 3.3V. Has internal pull-down, so unconnected = Low = 3.3V. May prevent flashing and/or booting if 3.3V flash is connected and pulled high. See ESP32 datasheet for more details.) AGPIO(GPIO_KEY1) +1, // 13 IO GPIO13, BTN-MENU AGPIO(GPIO_PWM1), // 14 IO GPIO14, LCD Backlight AGPIO(GPIO_USER), // 15 (I)O GPIO15, ADC2_CH3, TOUCH3, MTDO, HSPICS0, RTC_GPIO13, HS2_CMD, SD_CMD, EMAC_RXD3 (If driven Low, silences boot messages from normal boot. Has internal pull-up, so unconnected = High = normal output.) AGPIO(GPIO_USER), // 16 IO GPIO16, HS1_DATA4, U2RXD, EMAC_CLK_OUT AGPIO(GPIO_USER), // 17 IO GPIO17, HS1_DATA5, U2TXD, EMAC_CLK_OUT_180 AGPIO(GPIO_SPI_CLK), // 18 IO GPIO18, VSPI_CLK AGPIO(GPIO_SPI_MISO), // 19 IO GPIO19, VSPI_MISO 0, // 20 AGPIO(GPIO_ILI9341_DC), // 21 IO GPIO21, SPI_DC_LCD AGPIO(GPIO_SDCARD_CS), // 22 IO LED GPIO22, VSPI_CS1_TFLASH AGPIO(GPIO_SPI_MOSI), // 23 IO GPIO23, VSPI_MOSI 0, // 24 0, // 25 IO GPIO25, DAC_1 (PAM8304A) 0, // 26 IO GPIO26, DAC_2 (PAM8304A) AGPIO(GPIO_KEY1) +2, // 27 IO GPIO27, BTN-SELECT 0, // 28 0, // 29 0, // 30 0, // 31 AGPIO(GPIO_SWT1) +4, // 32 IO GPIO32, BTN-A AGPIO(GPIO_SWT1) +5, // 33 IO GPIO33, BTN-B AGPIO(GPIO_ADC_JOY), // 34 I NO PULLUP GPIO34, JOY-X (LEFT-RIGHT) AGPIO(GPIO_ADC_JOY) +1, // 35 I NO PULLUP GPIO35, JOY-Y (UP-DOWN) AGPIO(GPIO_ADC_RANGE) +2, // 36 I NO PULLUP GPIO36, SENSOR_VP (BATTERY CARGER) 0, // 37 NO PULLUP 0, // 38 NO PULLUP AGPIO(GPIO_KEY1) +3, // 39 I NO PULLUP GPIO39, BTN-START 0 // Flag }, #endif // USE_ODROID_GO #ifdef USE_ESP32_SOLO // { // ESP32 Solo (ESP32) - To be defined // }, #endif // USE_ESP32_SOLO #ifdef USE_WT32_ETH01 { // WT32_ETH01 - (ESP32) 0, // 0 (I)O GPIO0, Ethernet EMAC_REF_CLK AGPIO(GPIO_USER), // 1 IO TXD0 GPIO1, U0TXD, CLK_OUT3, EMAC_RXD2 AGPIO(GPIO_USER), // 2 IO GPIO2, ADC2_CH2, TOUCH2, RTC_GPIO12, HSPIWP, HS2_DATA0, SD_DATA0 AGPIO(GPIO_USER), // 3 IO RXD0 GPIO3, U0RXD, CLK_OUT2 AGPIO(GPIO_USER), // 4 IO GPIO4, ADC2_CH0, TOUCH0, RTC_GPIO10, HSPIHD, HS2_DATA1, SD_DATA1, EMAC_TX_ER AGPIO(GPIO_USER), // 5 IO GPIO5, RXD Led green // 6 IO GPIO6, Flash CLK // 7 IO GPIO7, Flash D0 // 8 IO GPIO8, Flash D1 0, // 9 IO GPIO9, Flash D2, U1RXD 0, // 10 IO GPIO10, Flash D3, U1TXD // 11 IO GPIO11, Flash CMD AGPIO(GPIO_USER), // 12 (I)O GPIO12, ADC2_CH5, TOUCH5, RTC_GPIO15, MTDI, HSPIQ, HS2_DATA2, SD_DATA2, EMAC_TXD3 (If driven High, flash voltage (VDD_SDIO) is 1.8V not default 3.3V. Has internal pull-down, so unconnected = Low = 3.3V. May prevent flashing and/or booting if 3.3V flash is connected and pulled high. See ESP32 datasheet for more details.) 0, // 13 IO GPIO13, Ethernet EMAC_RX_ER AGPIO(GPIO_USER), // 14 IO GPIO14, ADC2_CH6, TOUCH6, RTC_GPIO16, MTMS, HSPICLK, HS2_CLK, SD_CLK, EMAC_TXD2 AGPIO(GPIO_USER), // 15 (I)O GPIO15, ADC2_CH3, TOUCH3, MTDO, HSPICS0, RTC_GPIO13, HS2_CMD, SD_CMD, EMAC_RXD3 (If driven Low, silences boot messages from normal boot. Has internal pull-up, so unconnected = High = normal output.) AGPIO(GPIO_OUTPUT_HI), // 16 IO GPIO16, Ethernet OSC_ENA AGPIO(GPIO_LEDLNK_INV), // 17 IO GPIO17, Network link led (green) AGPIO(GPIO_ETH_PHY_MDIO), // 18 IO GPIO18, Ethernet MDIO 0, // 19 IO GPIO19, Ethernet TXD0 0, // 20 0, // 21 IO GPIO21, Ethernet EMAC_TX_EN 0, // 22 IO LED GPIO22, Ethernet EMAC_TXD1 AGPIO(GPIO_ETH_PHY_MDC), // 23 IO GPIO23, Ethernet MDC 0, // 24 0, // 25 IO GPIO25, Ethernet EMAC_RXD0 0, // 26 IO GPIO26, Ethernet EMAC_RXD1 0, // 27 IO GPIO27, Ethernet EMAC_RX_DV 0, // 28 0, // 29 0, // 30 0, // 31 AGPIO(GPIO_USER), // 32 IO GPIO32, CFG AGPIO(GPIO_USER), // 33 IO GPIO33, 485_EN 0, // 34 I NO PULLUP GPIO34, ADC1_CH6, RTC_GPIO4 AGPIO(GPIO_USER), // 35 I NO PULLUP GPIO35, ADC1_CH7, RTC_GPIO5 AGPIO(GPIO_USER), // 36 I NO PULLUP GPIO36, SENSOR_VP, ADC_H, ADC1_CH0, RTC_GPIO0 0, // 37 NO PULLUP 0, // 38 NO PULLUP AGPIO(GPIO_USER), // 39 I NO PULLUP GPIO39, SENSOR_VN, ADC1_CH3, ADC_H, RTC_GPIO3 0 // Flag }, #endif // USE_WT32_ETH01 #ifdef USE_TTGO_WATCH // { // TTGO Watch (ESP32) - To be defined // }, #endif // USE_TTGO_WATCH #ifdef USE_M5STACK_CORE2 { // M5STACK CORE2 - (ESP32) AGPIO(GPIO_USER), // 0 (I)O GPIO0, SPKR_LRCK AGPIO(GPIO_USER), // 1 IO TXD0 GPIO1, U0TXD AGPIO(GPIO_USER), // 2 IO GPIO2, SPKR_DATA AGPIO(GPIO_USER), // 3 IO RXD0 GPIO3, U0RXD AGPIO(GPIO_SDCARD_CS), // 4 IO GPIO4, SPI_CS_CARD 0, // 5 IO GPIO5, SPI_CS_LCD // 6 IO GPIO6, Flash CLK // 7 IO GPIO7, Flash D0 // 8 IO GPIO8, Flash D1 0, // 9 IO GPIO9, Flash D2, PSRAM_D3 0, // 10 IO GPIO10, Flash D3, PSRAM_D2 // 11 IO GPIO11, Flash CMD 0, // 12 (I)O GPIO12, SPKR_CLK AGPIO(GPIO_USER), // 13 IO GPIO13, ADC2_CH4, TOUCH4, RTC_GPIO14, MTCK, HSPID, HS2_DATA3, SD_DATA3, EMAC_RX_ER AGPIO(GPIO_USER), // 14 IO GPIO14, ADC2_CH6, TOUCH6, RTC_GPIO16, MTMS, HSPICLK, HS2_CLK, SD_CLK, EMAC_TXD2 0, // 15 (I)O GPIO15, SPI_DC_LCD 0, // 16 IO GPIO16, PSRAM_CS 0, // 17 IO GPIO17, PSRAM_CLK AGPIO(GPIO_SPI_CLK), // 18 IO GPIO18, SPI_CLK AGPIO(GPIO_USER), // 19 IO GPIO19, VSPIQ, U0CTS, EMAC_TXD0 0, // 20 0, // 21 IO GPIO21, I2C_SDA_INTERNAL 0, // 22 IO LED GPIO22, I2C_SCL_INTERNAL AGPIO(GPIO_SPI_MOSI), // 23 IO GPIO23, SPI_MOSI 0, // 24 AGPIO(GPIO_USER), // 25 IO GPIO25, DAC_1, ADC2_CH8, RTC_GPIO6, EMAC_RXD0 AGPIO(GPIO_USER), // 26 IO GPIO26, DAC_2, ADC2_CH9, RTC_GPIO7, EMAC_RXD1 AGPIO(GPIO_USER), // 27 IO GPIO27, ADC2_CH7, TOUCH7, RTC_GPIO17, EMAC_RX_DV 0, // 28 0, // 29 0, // 30 0, // 31 AGPIO(GPIO_I2C_SDA), // 32 IO GPIO32, I2C_SDA AGPIO(GPIO_I2C_SCL), // 33 IO GPIO33, I2C_SCL AGPIO(GPIO_USER), // 34 I NO PULLUP GPIO34, ADC1_CH6, RTC_GPIO4 AGPIO(GPIO_USER), // 35 I NO PULLUP GPIO35, ADC1_CH7, RTC_GPIO5 AGPIO(GPIO_USER), // 36 I NO PULLUP GPIO36, SENSOR_VP, ADC_H, ADC1_CH0, RTC_GPIO0 0, // 37 NO PULLUP AGPIO(GPIO_SPI_MISO), // 38 NO PULLUP GPIO38, SPI_MISO 0, // 39 I NO PULLUP GPIO39, INT_TOUCHPAD 0 // Flag } #endif // USE_M5STACK_CORE2 }; /*********************************************************************************************\ Known templates {"NAME":"AITHINKER CAM","GPIO":[4992,1,1,1,1,5088,1,1,1,1,1,1,1,1,5089,5090,0,5091,5184,5152,0,5120,5024,5056,0,0,0,0,4928,1,5094,5095,5092,0,0,5093],"FLAG":0,"BASE":1} {"NAME":"Olimex ESP32-PoE","GPIO":[1,1,1,1,1,1,0,0,5536,1,1,1,1,0,5600,0,0,0,0,5568,0,0,0,0,0,0,0,0,1,1,1,1,1,0,0,1],"FLAG":0,"BASE":1} {"NAME":"wESP32","GPIO":[1,1,1,1,1,1,0,0,0,1,1,1,5568,5600,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,1,1,1,1,0,0,1],"FLAG":0,"BASE":1} {"NAME":"Denky (Teleinfo)","GPIO":[1,1,1,1,5664,1,1,1,1,1,1,1,1,1,1,1,0,1,1,1,0,1376,1,1,0,0,0,0,1,5632,1,1,1,0,0,1],"FLAG":0,"BASE":1} \*********************************************************************************************/ #endif // ESP32 #endif // _TASMOTA_TEMPLATE_H_