/* xsns_60_GPS.ino - GPS UBLOX support for Tasmota Copyright (C) 2020 Theo Arends, Christian Baars and Adrian Scillato This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . */ #ifdef USE_GPS #if defined(ESP32) && defined(USE_FLOG) #undef USE_FLOG #warning FLOG deactivated on ESP32 #endif //ESP32 /*********************************************************************************************\ -------------------------------------------------------------------------------------------- Version Date Action Description -------------------------------------------------------------------------------------------- 0.9.3.0 20200214 integrate - fix set lat/lon via commandd 13, V-Port now works parallel --- 0.9.2.0 20200110 integrate - Added UART-over-TCP/IP-bridge (virtual serial port). Minor tweaks. --- 0.9.1.0 20191216 integrate - Added pin specifications from Tasmota WEB UI. Minor tweaks. --- 0.9.0.0 20190817 started - further development by Christian Baars - https://github.com/Staars/Sonoff-Tasmota forked - from arendst/tasmota - https://github.com/arendst/Sonoff-Tasmota base - code base from arendst and - https://www.youtube.com/watch?v=TwhCX0c8Xe0 ## GPS-driver for the Ublox-series 6-8 Driver is tested on a NEO-6m and a Beitian-220. Series 7 should work too. This adds only about 6kb to the program size, because the efficient UBX-protocol is used. These modules are quite cheap, starting at about 3.50€ for the NEO-6m. ## Features: - get position and time data - sets system time automatically and Settings.latitude and Settings.longitude via command - can log postion data with timestamp to flash with a small memory footprint of only 12 Bytes per record - constructs a GPX-file for download of this data - Web-UI - simplified NTP-server and UART-over-TCP/IP-bridge (virtual serial port) - command interface ## Usage: The serial pins are GPS_RX and GPS_TX, no further installation steps needed. To get more debug information compile it with option "DEBUG_TASMOTA_SENSOR". ## Commands: + sensor60 0 write to all available sectors, then restart and overwrite the older ones + sensor60 1 write to all available sectors, then restart and overwrite the older ones + sensor60 2 filter out horizontal drift noise + sensor60 3 turn off noise filter + sensor60 4 start recording, new data will be appended + sensor60 5 start new recording, old data will lost + sensor60 6 stop recording, download link will be visible in Web-UI + sensor60 7 send mqtt on new postion + TELE -> consider to set TELE to a very high value + sensor60 8 only TELE message + sensor60 9 start NTP-server + sensor60 10 deactivate NTP-server + sensor60 11 force update of Tasmota-system-UTC with every new GPS-time-message + sensor60 12 do not update of Tasmota-system-UTC with every new GPS-time-message + sensor60 13 set latitude and longitude in settings + sensor60 14 open virtual serial port over TCP, usable for u-center + sensor60 15 pause virtual serial port over TCP ## Rules examples for SSD1306 32x128 rule1 on tele-GPS#lat do DisplayText [s1p21c1l01f1]LAT: %value% endon on tele-GPS#lon do DisplayText [s1p21c1l2]LON: %value% endon on switch1#state==3 do sensor60 4 endon on switch1#state==2 do sensor60 6 endon rule2 on tele-GPS#int>9 do DisplayText [f0c9l4]I%value% endon on tele-GPS#int<10 do DisplayText [f0c9l4]I0%value% endon on tele-GPS#fil==1 do DisplayText [f0c18l4]F endon on tele-GPS#fil==0 do DisplayText [f0c18l4]N endon rule3 on tele-FLOG#sec do DisplayText [f0c1l4]SAV:%value% endon on tele-FLOG#rec==1 do DisplayText [f0c1l4]REC: endon on tele-FLOG#mode do DisplayText [f0c14l4]M%value% endon \*********************************************************************************************/ #define XSNS_60 60 #include "NTPServer.h" #include "NTPPacket.h" #ifdef ESP32 #include #endif /*********************************************************************************************\ * constants \*********************************************************************************************/ #define D_CMND_UBX "UBX" const char S_JSON_UBX_COMMAND_NVALUE[] PROGMEM = "{\"" D_CMND_UBX "%s\":%d}"; const char kUBXTypes[] PROGMEM = "UBX"; #define UBX_LAT_LON_THRESHOLD 1000 // filter out some noise of local drift #define UBX_SERIAL_BUFFER_SIZE 256 #define UBX_TCP_PORT 1234 #define NTP_MILLIS_OFFSET 50 // estimated latency in milliseconds /********************************************************************************************\ | *globals \*********************************************************************************************/ const char UBLOX_INIT[] PROGMEM = { // Disable NMEA 0xB5,0x62,0x06,0x01,0x08,0x00,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x24, // GxGGA off 0xB5,0x62,0x06,0x01,0x08,0x00,0xF0,0x01,0x00,0x00,0x00,0x00,0x00,0x01,0x01,0x2B, // GxGLL off 0xB5,0x62,0x06,0x01,0x08,0x00,0xF0,0x02,0x00,0x00,0x00,0x00,0x00,0x01,0x02,0x32, // GxGSA off 0xB5,0x62,0x06,0x01,0x08,0x00,0xF0,0x03,0x00,0x00,0x00,0x00,0x00,0x01,0x03,0x39, // GxGSV off 0xB5,0x62,0x06,0x01,0x08,0x00,0xF0,0x04,0x00,0x00,0x00,0x00,0x00,0x01,0x04,0x40, // GxRMC off 0xB5,0x62,0x06,0x01,0x08,0x00,0xF0,0x05,0x00,0x00,0x00,0x00,0x00,0x01,0x05,0x47, // GxVTG off // Disable UBX 0xB5,0x62,0x06,0x01,0x08,0x00,0x01,0x07,0x00,0x00,0x00,0x00,0x00,0x00,0x17,0xDC, //NAV-PVT off 0xB5,0x62,0x06,0x01,0x08,0x00,0x01,0x02,0x00,0x00,0x00,0x00,0x00,0x00,0x12,0xB9, //NAV-POSLLH off 0xB5,0x62,0x06,0x01,0x08,0x00,0x01,0x03,0x00,0x00,0x00,0x00,0x00,0x00,0x13,0xC0, //NAV-STATUS off 0xB5,0x62,0x06,0x01,0x08,0x00,0x01,0x21,0x00,0x00,0x00,0x00,0x00,0x00,0x31,0x92, //NAV-TIMEUTC off // Enable UBX // 0xB5,0x62,0x06,0x01,0x08,0x00,0x01,0x07,0x00,0x01,0x00,0x00,0x00,0x00,0x18,0xE1, //NAV-PVT on 0xB5,0x62,0x06,0x01,0x08,0x00,0x01,0x02,0x00,0x01,0x00,0x00,0x00,0x00,0x13,0xBE, //NAV-POSLLH on 0xB5,0x62,0x06,0x01,0x08,0x00,0x01,0x03,0x00,0x01,0x00,0x00,0x00,0x00,0x14,0xC5, //NAV-STATUS on 0xB5,0x62,0x06,0x01,0x08,0x00,0x01,0x21,0x00,0x01,0x00,0x00,0x00,0x00,0x32,0x97, //NAV-TIMEUTC on // Rate - we will not reset it for the moment after restart // 0xB5,0x62,0x06,0x08,0x06,0x00,0x64,0x00,0x01,0x00,0x01,0x00,0x7A,0x12, //(10Hz) // 0xB5,0x62,0x06,0x08,0x06,0x00,0xC8,0x00,0x01,0x00,0x01,0x00,0xDE,0x6A, //(5Hz) // 0xB5,0x62,0x06,0x08,0x06,0x00,0xE8,0x03,0x01,0x00,0x01,0x00,0x01,0x39 //(1Hz) // 0xB5,0x62,0x06,0x08,0x06,0x00,0xD0,0x07,0x01,0x00,0x01,0x00,0xED,0xBD //(0.5Hz) }; char UBX_name[4]; struct UBX_t { const char UBX_HEADER[2] = { 0xB5, 0x62 }; // TODO: Check if we really save space here inside the struct const char NAV_POSLLH_HEADER[2] = { 0x01, 0x02 }; const char NAV_STATUS_HEADER[2] = { 0x01, 0x03 }; const char NAV_TIME_HEADER[2] = { 0x01, 0x21 }; struct entry_t { int32_t lat; //raw sensor value int32_t lon; //raw sensor value uint32_t time; //local time from system (maybe provided by the sensor) }; union { entry_t values; uint8_t bytes[sizeof(entry_t)]; } rec_buffer; struct POLL_MSG { uint8_t cls; uint8_t id; uint16_t zero; }; struct NAV_POSLLH { uint8_t cls; uint8_t id; uint16_t len; uint32_t iTOW; int32_t lon; int32_t lat; int32_t alt; int32_t hMSL; uint32_t hAcc; uint32_t vAcc; }; struct NAV_STATUS { uint8_t cls; uint8_t id; uint16_t len; uint32_t iTOW; uint8_t gpsFix; uint8_t flags; //bit 0 - gpsfix valid uint8_t fixStat; uint8_t flags2; uint32_t ttff; uint32_t msss; }; struct NAV_TIME_UTC { uint8_t cls; uint8_t id; uint16_t len; uint32_t iTOW; uint32_t tAcc; int32_t nano; // Nanoseconds of second, range -1e9 .. 1e9 (UTC) uint16_t year; uint8_t month; uint8_t day; uint8_t hour; uint8_t min; uint8_t sec; struct { uint8_t UTC:1; uint8_t WKN:1; // week number uint8_t TOW:1; // time of week uint8_t padding:5; } valid; }; struct CFG_RATE { uint8_t cls; //0x06 uint8_t id; //0x08 uint16_t len; // 6 bytes uint16_t measRate; // in every ms -> 1 Hz = 1000 ms; 10 Hz = 100 ms -> x = 1000 ms / Hz uint16_t navRate; // x measurements for 1 navigation event uint16_t timeRef; // align to time system: 0= UTC, 1 = GPS, 2 = GLONASS, ... char CK[2]; // checksum }; struct { uint32_t last_iTOW; int32_t last_alt; uint32_t last_hAcc; uint32_t last_vAcc; uint8_t gpsFix; uint8_t non_empty_loops; // in case of an unintended reset of the GPS, the serial interface will get flooded with NMEA uint16_t log_interval; // in tenth of seconds int32_t timeOffset; // roughly computed offset millis() - iTOW } state; struct { uint32_t init:1; uint32_t filter_noise:1; uint32_t send_when_new:1; // no teleinterval uint32_t send_UI_only:1; uint32_t runningNTP:1; // uint32_t blockedNTP:1; uint32_t forceUTCupdate:1; uint32_t runningVPort:1; // TODO: more to come } mode; union { NAV_POSLLH navPosllh; NAV_STATUS navStatus; NAV_TIME_UTC navTime; POLL_MSG pollMsg; CFG_RATE cfgRate; } Message; uint8_t TCPbuf[UBX_SERIAL_BUFFER_SIZE]; size_t TCPbufSize; } UBX; enum UBXMsgType { MT_NONE, MT_NAV_POSLLH, MT_NAV_STATUS, MT_NAV_TIME, MT_POLL }; #ifdef USE_FLOG FLOG *Flog = nullptr; #endif //USE_FLOG #ifdef ESP8266 TasmotaSerial *UBXSerial; #else HardwareSerial *UBXSerial; #endif NtpServer timeServer(PortUdp); WiFiServer vPortServer(UBX_TCP_PORT); WiFiClient vPortClient; /*********************************************************************************************\ * helper function \*********************************************************************************************/ void UBXcalcChecksum(char* CK, size_t msgSize) { memset(CK, 0, 2); for (int i = 0; i < msgSize; i++) { CK[0] += ((char*)(&UBX.Message))[i]; CK[1] += CK[0]; } } bool UBXcompareMsgHeader(const char* msgHeader) { char* ptr = (char*)(&UBX.Message); return ptr[0] == msgHeader[0] && ptr[1] == msgHeader[1]; } void UBXinitCFG(void) { for (uint32_t i = 0; i < sizeof(UBLOX_INIT); i++) { UBXSerial->write( pgm_read_byte(UBLOX_INIT+i) ); } DEBUG_SENSOR_LOG(PSTR("UBX: turn off NMEA")); } void UBXsendCFGLine(uint8_t _line) { if (_line>sizeof(UBLOX_INIT)/16) return; for (uint32_t i = 0; i < 16; i++) { UBXSerial->write( pgm_read_byte(UBLOX_INIT+i+(_line*16)) ); } DEBUG_SENSOR_LOG(PSTR("UBX: send line %u of UBLOX_INIT"), _line); } void UBXTriggerTele(void) { mqtt_data[0] = '\0'; if (MqttShowSensor()) { MqttPublishPrefixTopic_P(TELE, PSTR(D_RSLT_SENSOR), Settings.flag.mqtt_sensor_retain); #ifdef USE_RULES RulesTeleperiod(); // Allow rule based HA messages #endif // USE_RULES } } /********************************************************************************************/ void UBXDetect(void) { UBX.mode.init = 0; if ((pin[GPIO_GPS_RX] < 99) && (pin[GPIO_GPS_TX] < 99)) { #ifdef ESP8266 UBXSerial = new TasmotaSerial(pin[GPIO_GPS_RX], pin[GPIO_GPS_TX], 1, 0, UBX_SERIAL_BUFFER_SIZE); // 64 byte buffer is NOT enough if (UBXSerial->begin(9600)) { #else UBXSerial = new HardwareSerial(2); UBXSerial->begin(9600,SERIAL_8N1,pin[GPIO_GPS_RX], pin[GPIO_GPS_TX]); { #endif DEBUG_SENSOR_LOG(PSTR("UBX: started serial")); #ifdef ESP8266 if (UBXSerial->hardwareSerial()) { ClaimSerial(); DEBUG_SENSOR_LOG(PSTR("UBX: claim HW")); } #endif } } else { return; } UBXinitCFG(); // turn off NMEA, only use "our" UBX-messages UBX.mode.init = 1; #ifdef USE_FLOG if (!Flog) { Flog = new FLOG; // init Flash Log Flog->init(); } #endif // USE_FLOG UBX.state.log_interval = 10; // 1 second UBX.mode.send_UI_only = true; // send UI data ... UBXTriggerTele(); // ... once at after start } uint32_t UBXprocessGPS() { static uint32_t fpos = 0; static char checksum[2]; static uint8_t currentMsgType = MT_NONE; static size_t payloadSize = sizeof(UBX.Message); // DEBUG_SENSOR_LOG(PSTR("UBX: check for serial data")); uint32_t data_bytes = 0; while ( UBXSerial->available() ) { data_bytes++; byte c = UBXSerial->read(); if (UBX.mode.runningVPort){ UBX.TCPbuf[data_bytes-1] = c; // immediately copy byte to TCP-buf UBX.TCPbufSize = data_bytes; } if ( fpos < 2 ) { // For the first two bytes we are simply looking for a match with the UBX header bytes (0xB5,0x62) if ( c == UBX.UBX_HEADER[fpos] ) { fpos++; } else { fpos = 0; // Reset to beginning state. } } else { // If we come here then fpos >= 2, which means we have found a match with the UBX_HEADER // and we are now reading in the bytes that make up the payload. // Place the incoming byte into the ubxMessage struct. The position is fpos-2 because // the struct does not include the initial two-byte header (UBX_HEADER). if ( (fpos-2) < payloadSize ) { ((char*)(&UBX.Message))[fpos-2] = c; } fpos++; if ( fpos == 4 ) { // We have just received the second byte of the message type header, // so now we can check to see what kind of message it is. if ( UBXcompareMsgHeader(UBX.NAV_POSLLH_HEADER) ) { currentMsgType = MT_NAV_POSLLH; payloadSize = sizeof(UBX_t::NAV_POSLLH); DEBUG_SENSOR_LOG(PSTR("UBX: got NAV_POSLLH")); } else if ( UBXcompareMsgHeader(UBX.NAV_STATUS_HEADER) ) { currentMsgType = MT_NAV_STATUS; payloadSize = sizeof(UBX_t::NAV_STATUS); DEBUG_SENSOR_LOG(PSTR("UBX: got NAV_STATUS")); } else if ( UBXcompareMsgHeader(UBX.NAV_TIME_HEADER) ) { currentMsgType = MT_NAV_TIME; payloadSize = sizeof(UBX_t::NAV_TIME_UTC); DEBUG_SENSOR_LOG(PSTR("UBX: got NAV_TIME_UTC")); } else { // unknown message type, bail fpos = 0; continue; } } if ( fpos == (payloadSize+2) ) { // All payload bytes have now been received, so we can calculate the // expected checksum value to compare with the next two incoming bytes. UBXcalcChecksum(checksum, payloadSize); } else if ( fpos == (payloadSize+3) ) { // First byte after the payload, ie. first byte of the checksum. // Does it match the first byte of the checksum we calculated? if ( c != checksum[0] ) { // Checksum doesn't match, reset to beginning state and try again. fpos = 0; } } else if ( fpos == (payloadSize+4) ) { // Second byte after the payload, ie. second byte of the checksum. // Does it match the second byte of the checksum we calculated? fpos = 0; // We will reset the state regardless of whether the checksum matches. if ( c == checksum[1] ) { // Checksum matches, we have a valid message. return currentMsgType; } } else if ( fpos > (payloadSize+4) ) { // We have now read more bytes than both the expected payload and checksum // together, so something went wrong. Reset to beginning state and try again. fpos = 0; } } } // DEBUG_SENSOR_LOG(PSTR("UBX: got none or unknown Message")); if (data_bytes!=0) { UBX.state.non_empty_loops++; DEBUG_SENSOR_LOG(PSTR("UBX: got %u bytes, non-empty-loop: %u"), data_bytes, UBX.state.non_empty_loops); } else { UBX.state.non_empty_loops = 0; // now a hidden GPS-device reset is unlikely } return MT_NONE; } /********************************************************************************************\ | * callback functions for the download \*********************************************************************************************/ #ifdef USE_FLOG void UBXsendHeader(void) { Webserver->setContentLength(CONTENT_LENGTH_UNKNOWN); Webserver->sendHeader(F("Content-Disposition"), F("attachment; filename=TASMOTA.gpx")); WSSend(200, CT_STREAM, F( "\r\n" "\r\n" "\r\n\r\n")); } void UBXsendRecord(uint8_t *buf) { char record[100]; char stime[32]; UBX_t::entry_t *entry = (UBX_t::entry_t*)buf; snprintf_P(stime, sizeof(stime), GetDT(entry->time).c_str()); char lat[12]; char lon[12]; dtostrfd((double)entry->lat/10000000.0f,7,lat); dtostrfd((double)entry->lon/10000000.0f,7,lon); snprintf_P(record, sizeof(record),PSTR("\n\t\n\n"),lat ,lon, stime); // DEBUG_SENSOR_LOG(PSTR("FLOG: DL %u %u"), Flog->sector.dword_buffer[k+j],Flog->sector.dword_buffer[k+j+1]); Webserver->sendContent_P(record); } void UBXsendFooter(void) { Webserver->sendContent(F("\n\n")); Webserver->sendContent(""); Rtc.user_time_entry = false; // we have blocked the main loop and want a new valid time } /********************************************************************************************/ void UBXsendFile(void) { if (!HttpCheckPriviledgedAccess()) { return; } Flog->startDownload(sizeof(UBX.rec_buffer),UBXsendHeader,UBXsendRecord,UBXsendFooter); } #endif //USE_FLOG /********************************************************************************************/ void UBXSetRate(uint16_t interval) { UBX.Message.cfgRate.cls = 0x06; UBX.Message.cfgRate.id = 0x08; UBX.Message.cfgRate.len = 6; uint32_t measRate = (1000*(uint32_t)interval); //seconds to milliseconds if (measRate > 0xffff) { measRate = 0xffff; // max. 65535 ms interval } UBX.Message.cfgRate.measRate = (uint16_t)measRate; UBX.Message.cfgRate.navRate = 1; UBX.Message.cfgRate.timeRef = 1; UBXcalcChecksum(UBX.Message.cfgRate.CK, sizeof(UBX.Message.cfgRate)-sizeof(UBX.Message.cfgRate.CK)); DEBUG_SENSOR_LOG(PSTR("UBX: requested interval: %u seconds measRate: %u ms"), interval, UBX.Message.cfgRate.measRate); UBXSerial->write(UBX.UBX_HEADER[0]); UBXSerial->write(UBX.UBX_HEADER[1]); for (uint32_t i =0; iwrite(((uint8_t*)(&UBX.Message.cfgRate))[i]); DEBUG_SENSOR_LOG(PSTR("UBX: cfgRate byte %u: %x"), i, ((uint8_t*)(&UBX.Message.cfgRate))[i]); } UBX.state.log_interval = 10*interval; } void UBXSelectMode(uint16_t mode) { DEBUG_SENSOR_LOG(PSTR("UBX: set mode to %u"),mode); switch(mode){ #ifdef USE_FLOG case 0: Flog->mode = 0; // write once to all available sectors, then stop break; case 1: Flog->mode = 1; // write to all available sectors, then restart and overwrite the older ones break; case 2: UBX.mode.filter_noise = true; // filter out horizontal drift noise, TODO: find useful values break; case 3: UBX.mode.filter_noise = false; break; case 4: Flog->startRecording(true); AddLog_P(LOG_LEVEL_INFO, PSTR("UBX: start recording - appending")); break; case 5: Flog->startRecording(false); AddLog_P(LOG_LEVEL_INFO, PSTR("UBX: start recording - new log")); break; case 6: if(Flog->recording == true){ Flog->stopRecording(); } AddLog_P(LOG_LEVEL_INFO, PSTR("UBX: stop recording")); break; #endif //USE_FLOG case 7: UBX.mode.send_when_new = 1; // send mqtt on new postion + TELE -> consider to set TELE to a very high value break; case 8: UBX.mode.send_when_new = 0; // only TELE break; case 9: if (timeServer.beginListening()) { UBX.mode.runningNTP = true; } break; case 10: UBX.mode.runningNTP = false; UBXsendCFGLine(10); //NAV-POSLLH on UBXsendCFGLine(11); //NAV-STATUS on break; case 11: UBX.mode.forceUTCupdate = true; break; case 12: UBX.mode.forceUTCupdate = false; break; case 13: Settings.latitude = UBX.rec_buffer.values.lat/10; Settings.longitude = UBX.rec_buffer.values.lon/10; break; case 14: vPortServer.begin(); UBX.mode.runningVPort = 1; break; case 15: // vPortServer.stop(); // seems not to work reliably UBX.mode.runningVPort = 0; break; default: if (mode>1000 && mode <1066) { UBXSetRate(mode-1000); // set interval between measurements in seconds from 1 to 65 } break; } UBX.mode.send_UI_only = true; UBXTriggerTele(); } /********************************************************************************************/ bool UBXHandlePOSLLH() { DEBUG_SENSOR_LOG(PSTR("UBX: iTOW: %u"),UBX.Message.navPosllh.iTOW); if (UBX.state.gpsFix>1) { if (UBX.mode.filter_noise) { if ((UBX.Message.navPosllh.lat-UBX.rec_buffer.values.lat go to pure NTP-mode UBXsendCFGLine(7); //NAV-POSLLH off UBXsendCFGLine(8); //NAV-STATUS off } return true; // new position } else { DEBUG_SENSOR_LOG(PSTR("UBX: no valid position data")); } return false; // no GPS-fix } void UBXHandleSTATUS() { DEBUG_SENSOR_LOG(PSTR("UBX: gpsFix: %u, valid: %u"), UBX.Message.navStatus.gpsFix, (UBX.Message.navStatus.flags)&1); if ((UBX.Message.navStatus.flags)&1) { UBX.state.gpsFix = UBX.Message.navStatus.gpsFix; //only store fixed status if flag is valid } else { UBX.state.gpsFix = 0; // without valid flag, everything is "no fix" } } void UBXHandleTIME() { DEBUG_SENSOR_LOG(PSTR("UBX: UTC-Time: %u-%u-%u %u:%u:%u"), UBX.Message.navTime.year, UBX.Message.navTime.month ,UBX.Message.navTime.day,UBX.Message.navTime.hour,UBX.Message.navTime.min,UBX.Message.navTime.sec); if (UBX.Message.navTime.valid.UTC == 1) { UBX.state.timeOffset = millis(); // iTOW%1000 should be 0 here, when NTP-server is enabled and in "pure mode" DEBUG_SENSOR_LOG(PSTR("UBX: UTC-Time is valid")); if (Rtc.user_time_entry == false || UBX.mode.forceUTCupdate || UBX.mode.runningNTP) { TIME_T gpsTime; gpsTime.year = UBX.Message.navTime.year - 1970; gpsTime.month = UBX.Message.navTime.month; gpsTime.day_of_month = UBX.Message.navTime.day; gpsTime.hour = UBX.Message.navTime.hour; gpsTime.minute = UBX.Message.navTime.min; gpsTime.second = UBX.Message.navTime.sec; UBX.rec_buffer.values.time = MakeTime(gpsTime); if (UBX.mode.forceUTCupdate || Rtc.user_time_entry == false){ AddLog_P(LOG_LEVEL_INFO, PSTR("UBX: UTC-Time is valid, set system time")); Rtc.utc_time = UBX.rec_buffer.values.time; } Rtc.user_time_entry = true; } } } void UBXHandleOther(void) { if (UBX.state.non_empty_loops>6) { // we expect only 4-5 non-empty loops in a row, could change with other sensor speed (Hz) if(UBX.mode.runningVPort) return; UBXinitCFG(); // this should only happen with lots of NMEA-messages, but it is only a guess!! AddLog_P(LOG_LEVEL_ERROR, PSTR("UBX: possible device-reset, will re-init")); UBXSerial->flush(); UBX.state.non_empty_loops = 0; } } /********************************************************************************************/ void UBXLoop50msec(void) { // handle virtual serial port if (UBX.mode.runningVPort){ if(!vPortClient.connected()) { vPortClient = vPortServer.available(); } while(vPortClient.available()) { byte _newByte = vPortClient.read(); UBXSerial->write(_newByte); } if (UBX.TCPbufSize!=0){ vPortClient.write((char*)UBX.TCPbuf, UBX.TCPbufSize); UBX.TCPbufSize = 0; } } // handle NTP-server if(UBX.mode.runningNTP){ timeServer.processOneRequest(UBX.rec_buffer.values.time, UBX.state.timeOffset - NTP_MILLIS_OFFSET); } } void UBXLoop(void) { static uint16_t counter; //count up every 100 msec static bool new_position; uint32_t msgType = UBXprocessGPS(); switch(msgType){ case MT_NAV_POSLLH: new_position = UBXHandlePOSLLH(); break; case MT_NAV_STATUS: UBXHandleSTATUS(); break; case MT_NAV_TIME: UBXHandleTIME(); break; default: UBXHandleOther(); break; } #ifdef USE_FLOG if (counter>UBX.state.log_interval) { if (Flog->recording && new_position) { UBX.rec_buffer.values.time = Rtc.local_time; Flog->addToBuffer(UBX.rec_buffer.bytes, sizeof(UBX.rec_buffer.bytes)); counter = 0; } } #endif // USE_FLOG counter++; } /********************************************************************************************/ // normaly in i18n.h #ifdef USE_WEBSERVER // {s} = , {m} = , {e} = #ifdef USE_FLOG #ifdef DEBUG_TASMOTA_SENSOR const char HTTP_SNS_FLOGVER[] PROGMEM = "{s}
{m}
{e}{s} FLOG with %u sectors: {m}%u bytes{e}" "{s} FLOG next sector for REC: {m} %u {e}" "{s} %u sector(s) with data at sector: {m} %u {e}"; const char HTTP_SNS_FLOGREC[] PROGMEM = "{s} RECORDING (bytes in buffer) {m}%u{e}"; #endif // DEBUG_TASMOTA_SENSOR const char HTTP_SNS_FLOG[] PROGMEM = "{s}
{m}
{e}{s} Flash-Log {m} %s{e}"; const char kFLOG_STATE0[] PROGMEM = "ready"; const char kFLOG_STATE1[] PROGMEM = "recording"; const char * kFLOG_STATE[] ={kFLOG_STATE0, kFLOG_STATE1}; const char HTTP_BTN_FLOG_DL[] PROGMEM = ""; #endif //USE_FLOG const char HTTP_SNS_NTPSERVER[] PROGMEM = "{s} NTP server {m}active{e}"; const char HTTP_SNS_GPS[] PROGMEM = "{s} GPS latitude {m}%s{e}" "{s} GPS longitude {m}%s{e}" "{s} GPS altitude {m}%s m{e}" "{s} GPS hor. Accuracy {m}%s m{e}" "{s} GPS vert. Accuracy {m}%s m{e}" "{s} GPS sat-fix status {m}%s{e}"; const char kGPSFix0[] PROGMEM = "no fix"; const char kGPSFix1[] PROGMEM = "dead reckoning only"; const char kGPSFix2[] PROGMEM = "2D-fix"; const char kGPSFix3[] PROGMEM = "3D-fix"; const char kGPSFix4[] PROGMEM = "GPS + dead reckoning combined"; const char kGPSFix5[] PROGMEM = "Time only fix"; const char * kGPSFix[] PROGMEM ={kGPSFix0, kGPSFix1, kGPSFix2, kGPSFix3, kGPSFix4, kGPSFix5}; // const char UBX_GOOGLE_MAPS[] =""; #endif // USE_WEBSERVER /********************************************************************************************/ void UBXShow(bool json) { char lat[12]; char lon[12]; char alt[12]; char hAcc[12]; char vAcc[12]; dtostrfd((double)UBX.rec_buffer.values.lat/10000000.0f,7,lat); dtostrfd((double)UBX.rec_buffer.values.lon/10000000.0f,7,lon); dtostrfd((double)UBX.state.last_alt/1000.0f,3,alt); dtostrfd((double)UBX.state.last_vAcc/1000.0f,3,hAcc); dtostrfd((double)UBX.state.last_hAcc/1000.0f,3,vAcc); if (json) { ResponseAppend_P(PSTR(",\"GPS\":{")); if (UBX.mode.send_UI_only) { uint32_t i = UBX.state.log_interval / 10; ResponseAppend_P(PSTR("\"fil\":%u,\"int\":%u}"), UBX.mode.filter_noise, i); } else { ResponseAppend_P(PSTR("\"lat\":%s,\"lon\":%s,\"alt\":%s,\"hAcc\":%s,\"vAcc\":%s}"), lat, lon, alt, hAcc, vAcc); } #ifdef USE_FLOG ResponseAppend_P(PSTR(",\"FLOG\":{\"rec\":%u,\"mode\":%u,\"sec\":%u}"), Flog->recording, Flog->mode, Flog->sectors_left); #endif //USE_FLOG UBX.mode.send_UI_only = false; #ifdef USE_WEBSERVER } else { WSContentSend_PD(HTTP_SNS_GPS, lat, lon, alt, hAcc, vAcc, kGPSFix[UBX.state.gpsFix]); //WSContentSend_P(UBX_GOOGLE_MAPS, lat, lon); #ifdef DEBUG_TASMOTA_SENSOR #ifdef USE_FLOG WSContentSend_PD(HTTP_SNS_FLOGVER, Flog->num_sectors, Flog->size, Flog->current_sector, Flog->sectors_left, Flog->sector.header.physical_start_sector); if (Flog->recording) { WSContentSend_PD(HTTP_SNS_FLOGREC, Flog->sector.header.buf_pointer - 8); } #endif //USE_FLOG #endif // DEBUG_TASMOTA_SENSOR #ifdef USE_FLOG if (Flog->ready) { WSContentSend_P(HTTP_SNS_FLOG,kFLOG_STATE[Flog->recording]); } if (!Flog->recording && Flog->found_saved_data) { WSContentSend_P(HTTP_BTN_FLOG_DL); } #endif //USE_FLOG if (UBX.mode.runningNTP) { WSContentSend_P(HTTP_SNS_NTPSERVER); } #endif // USE_WEBSERVER } } /*********************************************************************************************\ * check the UBX commands \*********************************************************************************************/ bool UBXCmd(void) { bool serviced = true; if (XdrvMailbox.data_len > 0) { UBXSelectMode(XdrvMailbox.payload); Response_P(S_JSON_UBX_COMMAND_NVALUE, XdrvMailbox.command, XdrvMailbox.payload); } return serviced; } /*********************************************************************************************\ * Interface \*********************************************************************************************/ bool Xsns60(uint8_t function) { bool result = false; if (FUNC_INIT == function) { UBXDetect(); } if (UBX.mode.init) { switch (function) { case FUNC_COMMAND_SENSOR: if (XSNS_60 == XdrvMailbox.index) { result = UBXCmd(); } break; case FUNC_EVERY_50_MSECOND: UBXLoop50msec(); // handles virtual serial port and NTP server break; case FUNC_EVERY_100_MSECOND: #ifdef USE_FLOG if (!Flog->running_download) #endif //USE_FLOG { UBXLoop(); } break; #ifdef USE_FLOG case FUNC_WEB_ADD_HANDLER: Webserver->on("/UBX", UBXsendFile); break; #endif //USE_FLOG case FUNC_JSON_APPEND: UBXShow(1); break; #ifdef USE_WEBSERVER case FUNC_WEB_SENSOR: #ifdef USE_FLOG if (!Flog->running_download) #endif //USE_FLOG { UBXShow(0); } break; #endif // USE_WEBSERVER } } return result; } #endif // USE_GPS