/*
  cs-CZ.h - localization for Czech with diacritics - Czech for Sonoff-Tasmota

  Copyright (C) 2019  Vladimír Synek

  This program is free software: you can redistribute it and/or modify
  it under the terms of the GNU General Public License as published by
  the Free Software Foundation, either version 3 of the License, or
  (at your option) any later version.

  This program is distributed in the hope that it will be useful,
  but WITHOUT ANY WARRANTY; without even the implied warranty of
  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  GNU General Public License for more details.

  You should have received a copy of the GNU General Public License
  along with this program.  If not, see <http://www.gnu.org/licenses/>.
*/

#ifndef _LANGUAGE_CS_CZ_H_
#define _LANGUAGE_CS_CZ_H_

/*************************** ATTENTION *******************************\
 *
 * Due to memory constraints only UTF-8 is supported.
 * To save code space keep text as short as possible.
 * Time and Date provided by SDK can not be localized (yet).
 * Use online command StateText to translate ON, OFF, HOLD and TOGGLE.
 * Use online command Prefix to translate cmnd, stat and tele.
 *
 * Updated until v6.5.0.9
\*********************************************************************/

//#define LANGUAGE_MODULE_NAME         // Enable to display "Module Generic" (ie Spanish), Disable to display "Generic Module" (ie English)

#define LANGUAGE_LCID 1029
// HTML (ISO 639-1) Language Code
#define D_HTML_LANGUAGE "cs"

// "2017-03-07T11:08:02" - ISO8601:2004
#define D_YEAR_MONTH_SEPARATOR "-"
#define D_MONTH_DAY_SEPARATOR "-"
#define D_DATE_TIME_SEPARATOR "T"
#define D_HOUR_MINUTE_SEPARATOR ":"
#define D_MINUTE_SECOND_SEPARATOR ":"

#define D_DAY3LIST "Ne Po Út St Čt Pá So "
#define D_MONTH3LIST "LedÚnoBřeDubKvěČvnČvcSrpZářŘíjLisPro"

// Non JSON decimal separator
#define D_DECIMAL_SEPARATOR ","

// Common
#define D_ADMIN "Admin"
#define D_AIR_QUALITY "Kvalita vzduchu"
#define D_AP "AP"                    // Access Point
#define D_AS "jako"
#define D_AUTO "AUTO"
#define D_BLINK "Blikání"
#define D_BLINKOFF "BlikáníVyp"
#define D_BOOT_COUNT "Počítadlo spuštění"
#define D_BRIGHTLIGHT "Světlý"
#define D_BSSID "BSSId"
#define D_BUTTON "Tlačítko"
#define D_BY "by"                    // Written by me
#define D_BYTES "Bytů"
#define D_CELSIUS "°C"
#define D_CHANNEL "Channel"
#define D_CO2 "CO2"
#define D_CODE "kód"                 // Button code
#define D_COLDLIGHT "Studené světlo"
#define D_COMMAND "Příkaz"
#define D_CONNECTED "...připojeno"
#define D_COUNT "Počítej"
#define D_COUNTER "Počítadlo"
#define D_CURRENT "Proud"          // As in Voltage and Current
#define D_DATA "Data"
#define D_DARKLIGHT "Tmavý"
#define D_DEBUG "Debug"
#define D_DISABLED "Zablokováno"
#define D_DISTANCE "Distance"
#define D_DNS_SERVER "Server DNS"
#define D_DONE "Provedeno"
#define D_DST_TIME "DST"
#define D_ECO2 "eCO2"
#define D_EMULATION "Emulace"
#define D_ENABLED "Otevřený"
#define D_ERASE "Smaž"
#define D_ERROR "Chyba"
#define D_FAHRENHEIT "Fahrenheita"
#define D_FAILED "chyba"
#define D_FALLBACK "Záložní"
#define D_FALLBACK_TOPIC "Záložní topic"
#define D_FALSE "Nepravda"
#define D_FILE "Soubor"
#define D_FLOW_RATE "Flow rate"
#define D_FREE_MEMORY "Volná paměť"
#define D_FREQUENCY "Kmitočet"
#define D_GAS "Plyn"
#define D_GATEWAY "Výchozí brána"
#define D_GROUP "Skupina"
#define D_HOST "Server"
#define D_HOSTNAME "Název serveru"
#define D_HUMIDITY "Vlhkost"
#define D_ILLUMINANCE "Osvětlení"
#define D_IMMEDIATE "Okamžité"      // Button immediate
#define D_INDEX "Index"
#define D_INFO "Informace"
#define D_INFRARED "Infrared"
#define D_INITIALIZED "Inicializovaný"
#define D_IP_ADDRESS "Adresa IP"
#define D_LIGHT "Světlo"
#define D_LWT "LWT"
#define D_MODULE "Modul"
#define D_MQTT "MQTT"
#define D_MULTI_PRESS "několikeré-stisknutí"
#define D_NOISE "Hluk"
#define D_NONE "Žádný"
#define D_OFF "Vyp."
#define D_OFFLINE "Neaktivní"
#define D_OK "OK"
#define D_ON "Zap."
#define D_ONLINE "Aktivní"
#define D_PASSWORD "Heslo"
#define D_PORT "Port"
#define D_POWER_FACTOR "Účiník"
#define D_POWERUSAGE "Příkon"
#define D_POWERUSAGE_ACTIVE "Činný příkon"
#define D_POWERUSAGE_APPARENT "Zdánlivý příkon"
#define D_POWERUSAGE_REACTIVE "Jalový příkon"
#define D_PRESSURE "Tlak"
#define D_PRESSUREATSEALEVEL "Tlak na hladině moře"
#define D_PROGRAM_FLASH_SIZE "Velikost paměti flash"
#define D_PROGRAM_SIZE "Velikost programu"
#define D_PROJECT "Projekt"
#define D_RAIN "Rain"
#define D_RECEIVED "Přijatý"
#define D_RESTART "Restart"
#define D_RESTARTING "Restartování"
#define D_RESTART_REASON "Příčina restartu"
#define D_RESTORE "Obnovit"
#define D_RETAINED "Zachováno"
#define D_RULE "Rule"
#define D_SAVE "Ulož"
#define D_SENSOR "Sensor"
#define D_SSID "SSID"
#define D_START "Start"
#define D_STD_TIME "STD"
#define D_STOP "Stop"
#define D_SUBNET_MASK "Maska podsítě"
#define D_SUBSCRIBE_TO "Přihlaš se do"
#define D_UNSUBSCRIBE_FROM "Unsubscribe from"
#define D_SUCCESSFUL "úspěšné."
#define D_SUNRISE "Svítání"
#define D_SUNSET "Soumrak"
#define D_TEMPERATURE "Teplota"
#define D_TO "do"
#define D_TOGGLE "Přepni"
#define D_TOPIC "Topic"
#define D_TOTAL_USAGE "Total Usage"
#define D_TRANSMIT "Odešli"
#define D_TRUE "Pravda"
#define D_TVOC "TVOC"
#define D_UPGRADE "aktualizace"
#define D_UPLOAD "Nahrání..."
#define D_UPTIME "Uptime"
#define D_USER "Uživatel"
#define D_UTC_TIME "UTC"
#define D_UV_INDEX "UV Index"
#define D_UV_INDEX_1 "Nízký"
#define D_UV_INDEX_2 "Střední"
#define D_UV_INDEX_3 "Vysoký"
#define D_UV_INDEX_4 "Nebezpečný"
#define D_UV_INDEX_5 "Popál1/2"
#define D_UV_INDEX_6 "Popál3"
#define D_UV_INDEX_7 "MimoRozsah"
#define D_UV_LEVEL "úroveň UV"
#define D_UV_POWER "UV Power"
#define D_VERSION "Verze"
#define D_VOLTAGE "Napětí"
#define D_WEIGHT "Hmotnost"
#define D_WARMLIGHT "Teplé světlo"
#define D_WEB_SERVER "Web Server"

// sonoff.ino
#define D_WARNING_MINIMAL_VERSION "UPOZORNĚNÍ Tato verze nepodporuje trvalé nastavení"
#define D_LEVEL_10 "úroveň 1-0"
#define D_LEVEL_01 "úroveň 0-1"
#define D_SERIAL_LOGGING_DISABLED "Logování na sériovém portu ukončeno"
#define D_SYSLOG_LOGGING_REENABLED "Obnoven zápis do Syslog"

#define D_SET_BAUDRATE_TO "Nastavení rychlosti přenosu na"
#define D_RECEIVED_TOPIC "Přijatý topic"
#define D_DATA_SIZE "Velikost dat"
#define D_ANALOG_INPUT "Analogový vstup"

// support.ino
#define D_OSWATCH "osWatch"
#define D_BLOCKED_LOOP "Zablokování smyčky"
#define D_WPS_FAILED_WITH_STATUS "Chyba WPSconfig se statusem"
#define D_ACTIVE_FOR_3_MINUTES "aktivní 3 minuty"
#define D_FAILED_TO_START "nepodařilo se spustit"
#define D_PATCH_ISSUE_2186 "Chyba 2186"
#define D_CONNECTING_TO_AP "Připojování k AP"
#define D_IN_MODE "v módu"
#define D_CONNECT_FAILED_NO_IP_ADDRESS "Chyba připojení, nebyla obdržena IP adresa"
#define D_CONNECT_FAILED_AP_NOT_REACHED "Chyba připojení, nedostupný AP"
#define D_CONNECT_FAILED_WRONG_PASSWORD "Chyba připojení, nesprávné heslo pro AP"
#define D_CONNECT_FAILED_AP_TIMEOUT "Chyba připojení, uplynul AP timeout"
#define D_ATTEMPTING_CONNECTION "Připojování..."
#define D_CHECKING_CONNECTION "Zkouška spojení..."
#define D_QUERY_DONE "Vyslání dotazu. Nalezena služba MQTT"
#define D_MQTT_SERVICE_FOUND "Služba MQTT byla nalezena"
#define D_FOUND_AT "znalezeno v"
#define D_SYSLOG_HOST_NOT_FOUND "Syslog Host nebyl nalezen"

// settings.ino
#define D_SAVED_TO_FLASH_AT "Uloženo do paměti flash v"
#define D_LOADED_FROM_FLASH_AT "Staženo z paměti flash z"
#define D_USE_DEFAULTS "Použij defaultní hodnoty"
#define D_ERASED_SECTOR "Smazaný sektor"

// xdrv_02_webserver.ino
#define D_NOSCRIPT "Pro používání prostředí Tasmota povolte JavaScript"
#define D_MINIMAL_FIRMWARE_PLEASE_UPGRADE "Firmware MINIMÁLNÍ<br>prosím zaktualizujte"
#define D_WEBSERVER_ACTIVE_ON "Aktivní Web server"
#define D_WITH_IP_ADDRESS "na IP adrese"
#define D_WEBSERVER_STOPPED "Web server zastaven"
#define D_FILE_NOT_FOUND "Soubor nebyl nalezen"
#define D_REDIRECTED "Přesměrování na vlastní portál"
#define D_WIFIMANAGER_SET_ACCESSPOINT_AND_STATION "Wi-Fi manager nastaví AP a zachová STA"
#define D_WIFIMANAGER_SET_ACCESSPOINT "Wi-Fi manager nastaví Access Point"
#define D_TRYING_TO_CONNECT "Zkouším připojit zařízení k síti"

#define D_RESTART_IN "Restart"
#define D_SECONDS "sekund"
#define D_DEVICE_WILL_RESTART "Zařízení bude zrestartováno během několika sekund"
#define D_BUTTON_TOGGLE "Přepínač"
#define D_CONFIGURATION "Nastavení"
#define D_INFORMATION "Informace"
#define D_FIRMWARE_UPGRADE "Aktualizace firmware"
#define D_CONSOLE "Konzole"
#define D_CONFIRM_RESTART "Potvrzení restartu"

#define D_CONFIGURE_MODULE "Nastavení modulu"
#define D_CONFIGURE_WIFI "Nastavení WiFi"
#define D_CONFIGURE_MQTT "Nastavení MQTT"
#define D_CONFIGURE_DOMOTICZ "Nastavení Domoticz"
#define D_CONFIGURE_LOGGING "Nastavení logování"
#define D_CONFIGURE_OTHER "Jiná nastavení"
#define D_CONFIRM_RESET_CONFIGURATION "Potvrzení resetu nastavení"
#define D_RESET_CONFIGURATION "Reset nastavení"
#define D_BACKUP_CONFIGURATION "Záloha nastavení"
#define D_RESTORE_CONFIGURATION "Obnovení nastavení"
#define D_MAIN_MENU "Hlavní menu"

#define D_MODULE_PARAMETERS "Nastavení modulu"
#define D_MODULE_TYPE "Typ modulu"
#define D_PULLUP_ENABLE "Tlačítko/Spínač bez pull-up"
#define D_ADC "ADC"
#define D_GPIO "GPIO"
#define D_SERIAL_IN "Serial In"
#define D_SERIAL_OUT "Serial Out"

#define D_WIFI_PARAMETERS "Nastavení WiFi"
#define D_SCAN_FOR_WIFI_NETWORKS "Scan sítí WiFi"
#define D_SCAN_DONE "Scan dokončen"
#define D_NO_NETWORKS_FOUND "Síť nebyla nalezena"
#define D_REFRESH_TO_SCAN_AGAIN "Zopakovat scan"
#define D_DUPLICATE_ACCESSPOINT "Kopie AP"
#define D_SKIPPING_LOW_QUALITY "Přeskočení z důvodu kvality signálu"
#define D_RSSI "RSSI"
#define D_WEP "WEP"
#define D_WPA_PSK "WPA PSK"
#define D_WPA2_PSK "WPA2 PSK"
#define D_AP1_SSID "AP1 SSID"
#define D_AP1_PASSWORD "Heslo AP1"
#define D_AP2_SSID "AP2 SSID"
#define D_AP2_PASSWORD "Heslo AP2"

#define D_MQTT_PARAMETERS "Nastavení MQTT"
#define D_CLIENT "Klient"
#define D_FULL_TOPIC "Celý topic"

#define D_LOGGING_PARAMETERS "Volba logování"
#define D_SERIAL_LOG_LEVEL "Seriová úroveň logu"
#define D_MQTT_LOG_LEVEL "Mqtt log level"
#define D_WEB_LOG_LEVEL "Webová úroveň logu"
#define D_SYS_LOG_LEVEL "Systemová úroveň logu"
#define D_MORE_DEBUG "Více debug informací"
#define D_SYSLOG_HOST "Syslog host"
#define D_SYSLOG_PORT "Syslog port"
#define D_TELEMETRY_PERIOD "Interval telemetrie"

#define D_OTHER_PARAMETERS "Další nastavení"
#define D_TEMPLATE "Šablona"
#define D_ACTIVATE "Aktivovat"
#define D_WEB_ADMIN_PASSWORD "Heslo Web administrátora"
#define D_MQTT_ENABLE "MQTT aktivní"
#define D_FRIENDLY_NAME "Friendly Name"
#define D_BELKIN_WEMO "Belkin WeMo"
#define D_HUE_BRIDGE "Hue Bridge"
#define D_SINGLE_DEVICE "single device"
#define D_MULTI_DEVICE "multi device"

#define D_CONFIGURE_TEMPLATE "Nastavení šablony"
#define D_TEMPLATE_PARAMETERS "Parametry šablony"
#define D_TEMPLATE_NAME "Název"
#define D_BASE_TYPE "Vzor z"
#define D_TEMPLATE_FLAGS "Volby"

#define D_SAVE_CONFIGURATION "Ulož nastavení"
#define D_CONFIGURATION_SAVED "Nastavení uloženo"
#define D_CONFIGURATION_RESET "Nastavení resetováno"

#define D_PROGRAM_VERSION "Verze programu"
#define D_BUILD_DATE_AND_TIME "Datum a čas kompilace"
#define D_CORE_AND_SDK_VERSION "Verze Core/SDK"
#define D_FLASH_WRITE_COUNT "Počet zápisů do paměti"
#define D_MAC_ADDRESS "Adresa MAC"
#define D_MQTT_HOST "Host MQTT"
#define D_MQTT_PORT "Port MQTT"
#define D_MQTT_CLIENT "Klient MQTT"
#define D_MQTT_USER "Uživatel MQTT"
#define D_MQTT_TOPIC "Topic MQTT"
#define D_MQTT_GROUP_TOPIC "Topic skupiny MQTT"
#define D_MQTT_FULL_TOPIC "Celý topic MQTT"
#define D_MDNS_DISCOVERY "Získávání mDNS"
#define D_MDNS_ADVERTISE "Rozesílání mDNS"
#define D_ESP_CHIP_ID "ID systému ESP"
#define D_FLASH_CHIP_ID "ID systému paměti flash"
#define D_FLASH_CHIP_SIZE "Velikost flash"
#define D_FREE_PROGRAM_SPACE "Volné místo pro program"

#define D_UPGRADE_BY_WEBSERVER "Aktualizace z Web serveru"
#define D_OTA_URL "URL OTA"
#define D_START_UPGRADE "Start aktualizace"
#define D_UPGRADE_BY_FILE_UPLOAD "Aktualizace nahráním souboru"
#define D_UPLOAD_STARTED "Nahrávání zahájeno"
#define D_UPGRADE_STARTED "Zahájení aktualizace"
#define D_UPLOAD_DONE "Nahrávání ukončeno"
#define D_UPLOAD_ERR_1 "Soubor nebyl vybrán"
#define D_UPLOAD_ERR_2 "Málo místa"
#define D_UPLOAD_ERR_3 "Magický byte má hodnotu jinou než 0xE9"
#define D_UPLOAD_ERR_4 "Velikost programu je větší než skutečná velikost paměti flash"
#define D_UPLOAD_ERR_5 "Chyba nahrávání, nesouhlasí porovnávané bity"
#define D_UPLOAD_ERR_6 "Chyba nahrávání. Spuštěn zápis do logu na úrovni 3"
#define D_UPLOAD_ERR_7 "Nahrávání přerušeno"
#define D_UPLOAD_ERR_8 "Špatný soubor"
#define D_UPLOAD_ERR_9 "Soubor je příliš velký"
#define D_UPLOAD_ERR_10 "Chyba inicializace RF chipu"
#define D_UPLOAD_ERR_11 "Chyba smazání RF chipu"
#define D_UPLOAD_ERR_12 "Chyba při zápisu do RF chipu"
#define D_UPLOAD_ERR_13 "Chyba dekódování RF firmwaru"
#define D_UPLOAD_ERROR_CODE "Chyba nahrávání"

#define D_ENTER_COMMAND "Vlož příkaz"
#define D_ENABLE_WEBLOG_FOR_RESPONSE "Zapni úroveň 2 zápisu Weblog, pokud je očekávána odpověď"
#define D_NEED_USER_AND_PASSWORD "Vyžadován uživatel=<username>&heslo=<password>"

// xdrv_01_mqtt.ino
#define D_FINGERPRINT "Verifikuj otisk TLS..."
#define D_TLS_CONNECT_FAILED_TO "Nepřipojeno TLS do"
#define D_RETRY_IN "Zopakuji za"
#define D_VERIFIED "Ověřeno otisk "
#define D_INSECURE "Nesprávné připojení z důvodu chybného otisku TLS"
#define D_CONNECT_FAILED_TO "Spojení se nepodařilo navázat"

// xplg_wemohue.ino
#define D_MULTICAST_DISABLED "Multicast je vypnutý"
#define D_MULTICAST_REJOINED "Multicast opět připojený"
#define D_MULTICAST_JOIN_FAILED "Multicast neúspěšný"
#define D_FAILED_TO_SEND_RESPONSE "Nepodařilo se odeslat odpověď"

#define D_WEMO "WeMo"
#define D_WEMO_BASIC_EVENT "WeMo základní událost"
#define D_WEMO_EVENT_SERVICE "WeMo servisní událost"
#define D_WEMO_META_SERVICE "WeMo meta událost"
#define D_WEMO_SETUP "WeMo setup"
#define D_RESPONSE_SENT "Odpověď odeslána"

#define D_HUE "Hue"
#define D_HUE_BRIDGE_SETUP "Hue setup"
#define D_HUE_API_NOT_IMPLEMENTED "Hue API není implementováno"
#define D_HUE_API "Hue API"
#define D_HUE_POST_ARGS "Hue POST args"
#define D_3_RESPONSE_PACKETS_SENT "3 pakety odpovědi odeslány"

// xdrv_07_domoticz.ino
#define D_DOMOTICZ_PARAMETERS "Nastavení Domoticz"
#define D_DOMOTICZ_IDX "Idx"
#define D_DOMOTICZ_KEY_IDX "Key idx"
#define D_DOMOTICZ_SWITCH_IDX "Spinac idx"
#define D_DOMOTICZ_SENSOR_IDX "Sensor idx"
  #define D_DOMOTICZ_TEMP "Temp"
  #define D_DOMOTICZ_TEMP_HUM "Temp,Vlhk"
  #define D_DOMOTICZ_TEMP_HUM_BARO "Temp,Vlhk,Tlak"
  #define D_DOMOTICZ_POWER_ENERGY "Příkon,Energie"
  #define D_DOMOTICZ_ILLUMINANCE "Osvětlení"
  #define D_DOMOTICZ_COUNT "Počítadlo/PM1"
  #define D_DOMOTICZ_VOLTAGE "Napětí/PM2,5"
  #define D_DOMOTICZ_CURRENT "Proud/PM10"
  #define D_DOMOTICZ_AIRQUALITY "AirQuality"
  #define D_DOMOTICZ_P1_SMART_METER "P1SmartMeter"
#define D_DOMOTICZ_UPDATE_TIMER "Aktualizace stopek"

// xdrv_09_timers.ino
#define D_CONFIGURE_TIMER "Nastavení Časovače"
#define D_TIMER_PARAMETERS "Časovač"
#define D_TIMER_ENABLE "Povol časovače"
#define D_TIMER_ARM "Aktivní"
#define D_TIMER_TIME "Čas"
#define D_TIMER_DAYS "Dny"
#define D_TIMER_REPEAT "Opakovat"
#define D_TIMER_OUTPUT "Výstup"
#define D_TIMER_ACTION "Napájení"

// xdrv_10_knx.ino
#define D_CONFIGURE_KNX "Nastavení KNX"
#define D_KNX_PARAMETERS "KNX parametry"
#define D_KNX_GENERAL_CONFIG "Obecné"
#define D_KNX_PHYSICAL_ADDRESS "Fyzická adresa"
#define D_KNX_PHYSICAL_ADDRESS_NOTE "( Musí být jedinečná v síti KNX )"
#define D_KNX_ENABLE "Povol KNX"
#define D_KNX_GROUP_ADDRESS_TO_WRITE "Data k odeslání na skupinové adresy"
#define D_ADD "Přidej"
#define D_DELETE "Smaž"
#define D_REPLY "Odpověď"
#define D_KNX_GROUP_ADDRESS_TO_READ "Skupinové adresy pro příjem dat z"
#define D_LOG_KNX "KNX: "
#define D_RECEIVED_FROM "Přijato z"
#define D_KNX_COMMAND_WRITE "Zapiš"
#define D_KNX_COMMAND_READ "Čti"
#define D_KNX_COMMAND_OTHER "Jiné"
#define D_SENT_TO "pošli"
#define D_KNX_WARNING "Skupinová adresa ( 0 / 0 / 0 ) je rezervována a nemůže být použita."
#define D_KNX_ENHANCEMENT "Communication Enhancement"
#define D_KNX_TX_SLOT "KNX TX"
#define D_KNX_RX_SLOT "KNX RX"

// xdrv_03_energy.ino
#define D_ENERGY_TODAY "Spotřeba Dnes"
#define D_ENERGY_YESTERDAY "Spotřeba Včera"
#define D_ENERGY_TOTAL "Celková spotřeba"

// xdrv_27_shutter.ino
#define D_OPEN "Open"
#define D_CLOSE "Close"
#define D_DOMOTICZ_SHUTTER "Shutter"

// xdrv_28_pcf8574.ino
#define D_CONFIGURE_PCF8574 "Configure PCF8574"
#define D_PCF8574_PARAMETERS "PCF8574 parameters"
#define D_INVERT_PORTS "Invert Ports"
#define D_DEVICE "Device"
#define D_DEVICE_INPUT "Input"
#define D_DEVICE_OUTPUT "Output"

// xsns_05_ds18b20.ino
#define D_SENSOR_BUSY "Sensor DS18x20 obsazen"
#define D_SENSOR_CRC_ERROR "Sensor DS18x20 chyba CRC"
#define D_SENSORS_FOUND "Nalezen sensor DS18x20"

// xsns_06_dht.ino
#define D_TIMEOUT_WAITING_FOR "Čekání na"
#define D_START_SIGNAL_LOW "nízký startovní signál"
#define D_START_SIGNAL_HIGH "vysoký startovní signál"
#define D_PULSE "impuls"
#define D_CHECKSUM_FAILURE "Chybný kontrolní součet"

// xsns_07_sht1x.ino
#define D_SENSOR_DID_NOT_ACK_COMMAND "Sensor neobdržel příkaz ACK"
#define D_SHT1X_FOUND "SHT1X nalezen"

// xsns_18_pms5003.ino
#define D_STANDARD_CONCENTRATION "CF-1 PM"     // Standard Particle CF-1 Particle Matter
#define D_ENVIRONMENTAL_CONCENTRATION "PM"     // Environmetal Particle Matter
#define D_PARTICALS_BEYOND "částic"

// xsns_32_mpu6050.ino
#define D_AX_AXIS "Accel. osa-X"
#define D_AY_AXIS "Accel. osa-Y"
#define D_AZ_AXIS "Accel. osa-Z"
#define D_GX_AXIS "Gyro osa-X"
#define D_GY_AXIS "Gyro osa-Y"
#define D_GZ_AXIS "Gyro osa-Z"

// xsns_34_hx711.ino
#define D_HX_CAL_REMOVE "Odstraňte zátěž"
#define D_HX_CAL_REFERENCE "Vložte referenční zátěž"
#define D_HX_CAL_DONE "Zkalibrováno"
#define D_HX_CAL_FAIL "Chyba kalibrace"
#define D_RESET_HX711 "Reset váhy"
#define D_CONFIGURE_HX711 "Konfigurace váhy"
#define D_HX711_PARAMETERS "Parametry váhy"
#define D_ITEM_WEIGHT "Vlastní hmotnost"
#define D_REFERENCE_WEIGHT "Referenční hmotnost"
#define D_CALIBRATE "Kalibruj"
#define D_CALIBRATION "Kalibrace"

//xsns_35_tx20.ino
#define D_TX20_WIND_DIRECTION "Směr větru"
#define D_TX20_WIND_SPEED "Rychlost větru"
#define D_TX20_WIND_SPEED_AVG "Průměrná rychlost větru"
#define D_TX20_WIND_SPEED_MAX "Maximální rychlost větru"
#define D_TX20_NORTH "S"
#define D_TX20_EAST "V"
#define D_TX20_SOUTH "J"
#define D_TX20_WEST "Z"

//xsns_43_hre.ino
#define D_LOG_HRE "HRE: "

// sonoff_template.h - keep them as short as possible to be able to fit them in GUI drop down box
#define D_SENSOR_NONE          "Není"
#define D_SENSOR_USER          "User"
#define D_SENSOR_DHT11         "DHT11"
#define D_SENSOR_AM2301        "AM2301"
#define D_SENSOR_SI7021        "SI7021"
#define D_SENSOR_DS18X20       "DS18x20"
#define D_SENSOR_I2C_SCL       "I2C SCL"
#define D_SENSOR_I2C_SDA       "I2C SDA"
#define D_SENSOR_WS2812        "WS2812"
#define D_SENSOR_DFR562        "MP3 Player"
#define D_SENSOR_IRSEND        "IRsend"
#define D_SENSOR_SWITCH        "Spínač"     // Suffix "1"
#define D_SENSOR_BUTTON        "Tlačítko"   // Suffix "1"
#define D_SENSOR_RELAY         "Relé"       // Suffix "1i"
#define D_SENSOR_LED           "Led"        // Suffix "1i"
#define D_SENSOR_LED_LINK      "LedLink"    // Suffix "i"
#define D_SENSOR_PWM           "PWM"        // Suffix "1",
#define D_SENSOR_COUNTER       "Počítadlo"  // Suffix "1"
#define D_SENSOR_IRRECV        "IRrecv"
#define D_SENSOR_MHZ_RX        "MHZ Rx"
#define D_SENSOR_MHZ_TX        "MHZ Tx"
#define D_SENSOR_PZEM004_RX    "PZEM004 Rx"
#define D_SENSOR_PZEM016_RX    "PZEM016 Rx"
#define D_SENSOR_PZEM017_RX    "PZEM017 Rx"
#define D_SENSOR_PZEM0XX_TX    "PZEM0XX Tx"
#define D_SENSOR_SAIR_RX       "SAir Rx"
#define D_SENSOR_SAIR_TX       "SAir Tx"
#define D_SENSOR_SPI_CS        "SPI CS"
#define D_SENSOR_SPI_DC        "SPI DC"
#define D_SENSOR_SPI_MISO      "SPI MISO"
#define D_SENSOR_SPI_MOSI      "SPI MOSI"
#define D_SENSOR_SPI_CLK       "SPI CLK"
#define D_SENSOR_BACKLIGHT     "Backlight"
#define D_SENSOR_PMS5003       "PMS5003"
#define D_SENSOR_SDS0X1_RX     "SDS0X1 Rx"
#define D_SENSOR_SDS0X1_TX     "SDS0X1 Tx"
#define D_SENSOR_SBR_RX        "SerBr Rx"
#define D_SENSOR_SBR_TX        "SerBr Tx"
#define D_SENSOR_SR04_TRIG     "SR04 Tri"
#define D_SENSOR_SR04_ECHO     "SR04 Ech"
#define D_SENSOR_SDM120_TX     "SDMx20 Tx"
#define D_SENSOR_SDM120_RX     "SDMx20 Rx"
#define D_SENSOR_SDM630_TX     "SDM630 Tx"
#define D_SENSOR_SDM630_RX     "SDM630 Rx"
#define D_SENSOR_TM1638_CLK    "TM16 CLK"
#define D_SENSOR_TM1638_DIO    "TM16 DIO"
#define D_SENSOR_TM1638_STB    "TM16 STB"
#define D_SENSOR_HX711_SCK     "HX711 SCK"
#define D_SENSOR_HX711_DAT     "HX711 DAT"
#define D_SENSOR_TX20_TX       "TX20"
#define D_SENSOR_RFSEND        "RFSend"
#define D_SENSOR_RFRECV        "RFrecv"
#define D_SENSOR_TUYA_TX       "Tuya Tx"
#define D_SENSOR_TUYA_RX       "Tuya Rx"
#define D_SENSOR_MGC3130_XFER  "MGC3130 Xfr"
#define D_SENSOR_MGC3130_RESET "MGC3130 Rst"
#define D_SENSOR_SSPI_MISO     "SSPI MISO"
#define D_SENSOR_SSPI_MOSI     "SSPI MOSI"
#define D_SENSOR_SSPI_SCLK     "SSPI SCLK"
#define D_SENSOR_SSPI_CS       "SSPI CS"
#define D_SENSOR_SSPI_DC       "SSPI DC"
#define D_SENSOR_RF_SENSOR     "RF Sensor"
#define D_SENSOR_AZ_RX         "AZ Rx"
#define D_SENSOR_AZ_TX         "AZ Tx"
#define D_SENSOR_MAX31855_CS   "MX31855 CS"
#define D_SENSOR_MAX31855_CLK  "MX31855 CLK"
#define D_SENSOR_MAX31855_DO   "MX31855 DO"
#define D_SENSOR_NRG_SEL       "HLWBL SEL"  // Suffix "i"
#define D_SENSOR_NRG_CF1       "HLWBL CF1"
#define D_SENSOR_HLW_CF        "HLW8012 CF"
#define D_SENSOR_HJL_CF        "BL0937 CF"
#define D_SENSOR_MCP39F5_TX    "MCP39F5 Tx"
#define D_SENSOR_MCP39F5_RX    "MCP39F5 Rx"
#define D_SENSOR_MCP39F5_RST   "MCP39F5 Rst"
#define D_SENSOR_CSE7766_TX    "CSE7766 Tx"
#define D_SENSOR_CSE7766_RX    "CSE7766 Rx"
#define D_SENSOR_PN532_TX      "PN532 Tx"
#define D_SENSOR_PN532_RX      "PN532 Rx"
#define D_SENSOR_SM16716_CLK   "SM16716 CLK"
#define D_SENSOR_SM16716_DAT   "SM16716 DAT"
#define D_SENSOR_SM16716_POWER "SM16716 PWR"
#define D_SENSOR_MY92X1_DI     "MY92x1 DI"
#define D_SENSOR_MY92X1_DCKI   "MY92x1 DCKI"
#define D_SENSOR_ARIRFRCV      "ALux IrRcv"
#define D_SENSOR_ARIRFSEL      "ALux IrSel"
#define D_SENSOR_TXD           "Serial Tx"
#define D_SENSOR_RXD           "Serial Rx"
#define D_SENSOR_ROTARY        "Rotary"     // Suffix "1A"
#define D_SENSOR_HRE_CLOCK     "HRE Clock"
#define D_SENSOR_HRE_DATA      "HRE Data"
#define D_SENSOR_ADE7953_IRQ   "ADE7953 IRQ"
#define D_SENSOR_BUZZER        "Buzzer"
#define D_SENSOR_OLED_RESET    "OLED Reset"
#define D_SENSOR_ZIGBEE_TXD    "Zigbee Tx"
#define D_SENSOR_ZIGBEE_RXD    "Zigbee Rx"
#define D_SENSOR_SOLAXX1_TX    "SolaxX1 Tx"
#define D_SENSOR_SOLAXX1_RX    "SolaxX1 Rx"
#define D_SENSOR_IBEACON_TX    "iBeacon TX"
#define D_SENSOR_IBEACON_RX    "iBeacon RX"
#define D_SENSOR_RDM6300_RX    "RDM6300 RX"
#define D_SENSOR_CC1101_CS     "CC1101 CS"
#define D_SENSOR_A4988_DIR     "A4988 DIR"
#define D_SENSOR_A4988_STP     "A4988 STP"
#define D_SENSOR_A4988_ENA     "A4988 ENA"
#define D_SENSOR_A4988_MS1     "A4988 MS1"
#define D_SENSOR_A4988_MS2     "A4988 MS2"
#define D_SENSOR_A4988_MS3     "A4988 MS3"
#define D_SENSOR_DDS2382_TX    "DDS238-2 Tx"
#define D_SENSOR_DDS2382_RX    "DDS238-2 Rx"
#define D_SENSOR_DDSU666_TX    "DDSU666 Tx"
#define D_SENSOR_DDSU666_RX    "DDSU666 Rx"
#define D_SENSOR_SM2135_CLK    "SM2135 Clk"
#define D_SENSOR_SM2135_DAT    "SM2135 Dat"
#define D_SENSOR_DEEPSLEEP     "DeepSleep"
#define D_SENSOR_EXS_MCU_RESET "EXS Reset"

// Units
#define D_UNIT_AMPERE "A"
#define D_UNIT_CENTIMETER "cm"
#define D_UNIT_HERTZ "Hz"
#define D_UNIT_HOUR "hod"
#define D_UNIT_GALLONS "gal"
#define D_UNIT_GALLONS_PER_MIN "g/m"
#define D_UNIT_KILOGRAM "kg"
#define D_UNIT_INCREMENTS "inc"
#define D_UNIT_KILOMETER_PER_HOUR "km/h"  // or "km/h"
#define D_UNIT_KILOOHM "kOhm"
#define D_UNIT_KILOWATTHOUR "kWh"
#define D_UNIT_LUX "lx"
#define D_UNIT_MICROGRAM_PER_CUBIC_METER "µg/m³"
#define D_UNIT_MICROMETER "µm"
#define D_UNIT_MICROSECOND "µs"
#define D_UNIT_MILLIAMPERE "mA"
#define D_UNIT_MILLIMETER "mm"
#define D_UNIT_MILLIMETER_MERCURY "mmHg"
#define D_UNIT_MILLISECOND "ms"
#define D_UNIT_MINUTE "min"
#define D_UNIT_PARTS_PER_BILLION "ppb"
#define D_UNIT_PARTS_PER_DECILITER "ppd"
#define D_UNIT_PARTS_PER_MILLION "ppm"
#define D_UNIT_PRESSURE "hPa"
#define D_UNIT_SECOND "sec"
#define D_UNIT_SECTORS "sektory"
#define D_UNIT_VA "VA"
#define D_UNIT_VAR "VAr"
#define D_UNIT_VOLT "V"
#define D_UNIT_WATT "W"
#define D_UNIT_WATTHOUR "Wh"
#define D_UNIT_WATT_METER_QUADRAT "W/m²"

// Log message prefix
#define D_LOG_APPLICATION "APP: "  // Application
#define D_LOG_BRIDGE "BRG: "       // Bridge
#define D_LOG_CONFIG "CFG: "       // Settings
#define D_LOG_COMMAND "CMD: "      // Command
#define D_LOG_DEBUG "DBG: "        // Debug
#define D_LOG_DHT "DHT: "          // DHT sensor
#define D_LOG_DOMOTICZ "DOM: "     // Domoticz
#define D_LOG_DSB "DSB: "          // DS18xB20 sensor
#define D_LOG_HTTP "HTP: "         // HTTP webserver
#define D_LOG_I2C "I2C: "          // I2C
#define D_LOG_IRR "IRR: "          // Infra Red Received
#define D_LOG_LOG "LOG: "          // Logging
#define D_LOG_MODULE "MOD: "       // Module
#define D_LOG_MDNS "DNS: "         // mDNS
#define D_LOG_MQTT "MQT: "         // MQTT
#define D_LOG_OTHER "OTH: "        // Other
#define D_LOG_RESULT "RSL: "       // Result
#define D_LOG_RFR "RFR: "          // RF Received
#define D_LOG_SERIAL "SER: "       // Serial
#define D_LOG_SHT1 "SHT: "         // SHT1x sensor
#define D_LOG_UPLOAD "UPL: "       // Upload
#define D_LOG_UPNP "UPP: "         // UPnP
#define D_LOG_WIFI "WIF: "         // Wifi

//SDM220
#define D_PHASE_ANGLE     "Phase Angle"
#define D_IMPORT_ACTIVE   "Import Active"
#define D_EXPORT_ACTIVE   "Export Active"
#define D_IMPORT_REACTIVE "Import Reactive"
#define D_EXPORT_REACTIVE "Export Reactive"
#define D_TOTAL_REACTIVE  "Total Reactive"
#define D_UNIT_KWARH      "kVArh"
#define D_UNIT_ANGLE      "Deg"

//SOLAXX1
#define D_PV1_VOLTAGE     "PV1 Voltage"
#define D_PV1_CURRENT     "PV1 Current"
#define D_PV1_POWER       "PV1 Power"
#define D_PV2_VOLTAGE     "PV2 Voltage"
#define D_PV2_CURRENT     "PV2 Current"
#define D_PV2_POWER       "PV2 Power"
#define D_SOLAR_POWER     "Solar Power"
#define D_INVERTER_POWER  "Inverter Power"
#define D_STATUS          "Status"
#define D_WAITING         "Waiting"
#define D_CHECKING        "Checking"
#define D_WORKING         "Working"
#define D_FAILURE         "Failure"
#define D_SOLAX_ERROR_0   "No Error Code"
#define D_SOLAX_ERROR_1   "Grid Lost Fault"
#define D_SOLAX_ERROR_2   "Grid Voltage Fault"
#define D_SOLAX_ERROR_3   "Grid Frequency Fault"
#define D_SOLAX_ERROR_4   "Pv Voltage Fault"
#define D_SOLAX_ERROR_5   "Isolation Fault"
#define D_SOLAX_ERROR_6   "Over Temperature Fault"
#define D_SOLAX_ERROR_7   "Fan Fault"
#define D_SOLAX_ERROR_8   "Other Device Fault"

#endif  // _LANGUAGE_CS_CZ_H_