/* * IRremoteESP8266: IRServer - demonstrates sending IR codes controlled from a webserver * Version 0.2 June, 2017 * Copyright 2015 Mark Szabo * * An IR LED circuit *MUST* be connected to ESP8266 pin 4 (D2). * * TL;DR: The IR LED needs to be driven by a transistor for a good result. * * Suggested circuit: * https://github.com/markszabo/IRremoteESP8266/wiki#ir-sending * * Common mistakes & tips: * * Don't just connect the IR LED directly to the pin, it won't * have enough current to drive the IR LED effectively. * * Make sure you have the IR LED polarity correct. * See: https://learn.sparkfun.com/tutorials/polarity/diode-and-led-polarity * * Typical digital camera/phones can be used to see if the IR LED is flashed. * Replace the IR LED with a normal LED if you don't have a digital camera * when debugging. * * Avoid using the following pins unless you really know what you are doing: * * Pin 0/D3: Can interfere with the boot/program mode & support circuits. * * Pin 1/TX/TXD0: Any serial transmissions from the ESP8266 will interfere. * * Pin 3/RX/RXD0: Any serial transmissions to the ESP8266 will interfere. * * ESP-01 modules are tricky. We suggest you use a module with more GPIOs * for your first time. e.g. ESP-12 etc. */ #ifndef UNIT_TEST #include #endif #include #include #include #include #include #include const char* ssid = "....."; const char* password = "....."; MDNSResponder mdns; ESP8266WebServer server(80); IRsend irsend(4); // An IR LED is controlled by GPIO pin 4 (D2) void handleRoot() { server.send(200, "text/html", "" \ "ESP8266 Demo" \ "" \ "

Hello from ESP8266, you can send NEC encoded IR" \ "signals from here!

" \ "

Send 0xFFE01F

" \ "

Send 0xFAB123

" \ "

Send 0xFFE896

" \ "" \ ""); } void handleIr() { for (uint8_t i = 0; i < server.args(); i++) { if (server.argName(i) == "code") { uint32_t code = strtoul(server.arg(i).c_str(), NULL, 10); irsend.sendNEC(code, 32); } } handleRoot(); } void handleNotFound() { String message = "File Not Found\n\n"; message += "URI: "; message += server.uri(); message += "\nMethod: "; message += (server.method() == HTTP_GET)?"GET":"POST"; message += "\nArguments: "; message += server.args(); message += "\n"; for (uint8_t i = 0; i < server.args(); i++) message += " " + server.argName(i) + ": " + server.arg(i) + "\n"; server.send(404, "text/plain", message); } void setup(void) { irsend.begin(); Serial.begin(115200); WiFi.begin(ssid, password); Serial.println(""); // Wait for connection while (WiFi.status() != WL_CONNECTED) { delay(500); Serial.print("."); } Serial.println(""); Serial.print("Connected to "); Serial.println(ssid); Serial.print("IP address: "); Serial.println(WiFi.localIP()); if (mdns.begin("esp8266", WiFi.localIP())) { Serial.println("MDNS responder started"); } server.on("/", handleRoot); server.on("/ir", handleIr); server.on("/inline", [](){ server.send(200, "text/plain", "this works as well"); }); server.onNotFound(handleNotFound); server.begin(); Serial.println("HTTP server started"); } void loop(void) { server.handleClient(); }