/* xdrv_07_domoticz.ino - domoticz support for Tasmota Copyright (C) 2019 Theo Arends This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . */ #ifdef USE_DOMOTICZ #define XDRV_07 7 #define D_PRFX_DOMOTICZ "Domoticz" #define D_CMND_IDX "Idx" #define D_CMND_KEYIDX "KeyIdx" #define D_CMND_SWITCHIDX "SwitchIdx" #define D_CMND_SENSORIDX "SensorIdx" #define D_CMND_UPDATETIMER "UpdateTimer" const char kDomoticzCommands[] PROGMEM = D_PRFX_DOMOTICZ "|" // Prefix D_CMND_IDX "|" D_CMND_KEYIDX "|" D_CMND_SWITCHIDX "|" D_CMND_SENSORIDX "|" D_CMND_UPDATETIMER ; void (* const DomoticzCommand[])(void) PROGMEM = { &CmndDomoticzIdx, &CmndDomoticzKeyIdx, &CmndDomoticzSwitchIdx, &CmndDomoticzSensorIdx, &CmndDomoticzUpdateTimer }; const char DOMOTICZ_MESSAGE[] PROGMEM = "{\"idx\":%d,\"nvalue\":%d,\"svalue\":\"%s\",\"Battery\":%d,\"RSSI\":%d}"; #if MAX_DOMOTICZ_SNS_IDX < DZ_MAX_SENSORS #error "Domoticz: Too many sensors or change settings.h layout" #endif const char kDomoticzSensors[] PROGMEM = D_DOMOTICZ_TEMP "|" D_DOMOTICZ_TEMP_HUM "|" D_DOMOTICZ_TEMP_HUM_BARO "|" D_DOMOTICZ_POWER_ENERGY "|" D_DOMOTICZ_ILLUMINANCE "|" D_DOMOTICZ_COUNT "|" D_DOMOTICZ_VOLTAGE "|" D_DOMOTICZ_CURRENT "|" D_DOMOTICZ_AIRQUALITY "|" D_DOMOTICZ_P1_SMART_METER "|" D_DOMOTICZ_SHUTTER ; char domoticz_in_topic[] = DOMOTICZ_IN_TOPIC; int domoticz_update_timer = 0; uint32_t domoticz_fan_debounce = 0; // iFan02 state debounce timer bool domoticz_subscribe = false; bool domoticz_update_flag = true; int DomoticzBatteryQuality(void) { // Battery 0%: ESP 2.6V (minimum operating voltage is 2.5) // Battery 100%: ESP 3.6V (maximum operating voltage is 3.6) // Battery 101% to 200%: ESP over 3.6V (means over maximum operating voltage) int quality = 100; // Voltage range from 2,6V > 0% to 3,6V > 100% #ifdef USE_ADC_VCC uint16_t voltage = ESP.getVcc(); if (voltage <= 2600) { quality = 0; } else if (voltage >= 4600) { quality = 200; } else { quality = (voltage - 2600) / 10; } #endif return quality; } int DomoticzRssiQuality(void) { // RSSI range: 0% to 10% (12 means disable RSSI in Domoticz) return WifiGetRssiAsQuality(WiFi.RSSI()) / 10; } #ifdef USE_SONOFF_IFAN void MqttPublishDomoticzFanState(void) { if (Settings.flag.mqtt_enabled && Settings.domoticz_relay_idx[1]) { // SetOption3 - Enable MQTT char svalue[8]; // Fanspeed value int fan_speed = GetFanspeed(); snprintf_P(svalue, sizeof(svalue), PSTR("%d"), fan_speed * 10); Response_P(DOMOTICZ_MESSAGE, (int)Settings.domoticz_relay_idx[1], (0 == fan_speed) ? 0 : 2, svalue, DomoticzBatteryQuality(), DomoticzRssiQuality()); MqttPublish(domoticz_in_topic); domoticz_fan_debounce = millis(); } } void DomoticzUpdateFanState(void) { if (domoticz_update_flag) { MqttPublishDomoticzFanState(); } domoticz_update_flag = true; } #endif // USE_SONOFF_IFAN void MqttPublishDomoticzPowerState(uint8_t device) { if (Settings.flag.mqtt_enabled) { // SetOption3 - Enable MQTT if ((device < 1) || (device > devices_present)) { device = 1; } if (Settings.domoticz_relay_idx[device -1]) { #ifdef USE_SONOFF_IFAN if (IsModuleIfan() && (device > 1)) { // Fan handled by MqttPublishDomoticzFanState } else { #endif // USE_SONOFF_IFAN char svalue[8]; // Dimmer value snprintf_P(svalue, sizeof(svalue), PSTR("%d"), Settings.light_dimmer); Response_P(DOMOTICZ_MESSAGE, (int)Settings.domoticz_relay_idx[device -1], (power & (1 << (device -1))) ? 1 : 0, (light_type) ? svalue : "", DomoticzBatteryQuality(), DomoticzRssiQuality()); MqttPublish(domoticz_in_topic); #ifdef USE_SONOFF_IFAN } #endif // USE_SONOFF_IFAN } } } void DomoticzUpdatePowerState(uint8_t device) { if (domoticz_update_flag) { MqttPublishDomoticzPowerState(device); } domoticz_update_flag = true; } void DomoticzMqttUpdate(void) { if (domoticz_subscribe && (Settings.domoticz_update_timer || domoticz_update_timer)) { domoticz_update_timer--; if (domoticz_update_timer <= 0) { domoticz_update_timer = Settings.domoticz_update_timer; for (uint32_t i = 1; i <= devices_present; i++) { #ifdef USE_SONOFF_IFAN if (IsModuleIfan() && (i > 1)) { MqttPublishDomoticzFanState(); break; } else { #endif // USE_SONOFF_IFAN MqttPublishDomoticzPowerState(i); #ifdef USE_SONOFF_IFAN } #endif // USE_SONOFF_IFAN } } } } void DomoticzMqttSubscribe(void) { uint8_t maxdev = (devices_present > MAX_DOMOTICZ_IDX) ? MAX_DOMOTICZ_IDX : devices_present; for (uint32_t i = 0; i < maxdev; i++) { if (Settings.domoticz_relay_idx[i]) { domoticz_subscribe = true; } } if (domoticz_subscribe) { char stopic[TOPSZ]; snprintf_P(stopic, sizeof(stopic), PSTR(DOMOTICZ_OUT_TOPIC "/#")); // domoticz topic MqttSubscribe(stopic); } } /* * ArduinoJSON Domoticz Switch entry used to calculate jsonBuf: JSON_OBJECT_SIZE(11) + 129 = 313 { "Battery" : 255, "RSSI" : 12, "dtype" : "Light/Switch", "id" : "000140E7", "idx" : 159, "name" : "Sonoff1", "nvalue" : 1, "stype" : "Switch", "svalue1" : "0", "switchType" : "Dimmer", "unit" : 1 } * Fail on this one { "LastUpdate" : "2018-10-02 20:39:45", "Name" : "Sfeerverlichting", "Status" : "Off", "Timers" : "true", "Type" : "Group", "idx" : "2" } */ bool DomoticzMqttData(void) { domoticz_update_flag = true; if (strncasecmp_P(XdrvMailbox.topic, PSTR(DOMOTICZ_OUT_TOPIC), strlen(DOMOTICZ_OUT_TOPIC)) != 0) { return false; // Process unchanged data } // topic is domoticz/out so try to analyse if (XdrvMailbox.data_len < 20) { return true; // No valid data } StaticJsonBuffer<400> jsonBuf; JsonObject& domoticz = jsonBuf.parseObject(XdrvMailbox.data); if (!domoticz.success()) { return true; // To much or invalid data } // if (strcmp_P(domoticz["dtype"],PSTR("Light/Switch"))) { // return true; // } uint32_t idx = domoticz["idx"]; int16_t nvalue = -1; if (domoticz.containsKey("nvalue")) { nvalue = domoticz["nvalue"]; } AddLog_P2(LOG_LEVEL_DEBUG_MORE, PSTR(D_LOG_DOMOTICZ "idx %d, nvalue %d"), idx, nvalue); bool found = false; if ((idx > 0) && (nvalue >= 0) && (nvalue <= 15)) { uint8_t maxdev = (devices_present > MAX_DOMOTICZ_IDX) ? MAX_DOMOTICZ_IDX : devices_present; for (uint32_t i = 0; i < maxdev; i++) { if (idx == Settings.domoticz_relay_idx[i]) { bool iscolordimmer = strcmp_P(domoticz["dtype"],PSTR("Color Switch")) == 0; char stemp1[10]; snprintf_P(stemp1, sizeof(stemp1), PSTR("%d"), i +1); #ifdef USE_SONOFF_IFAN if (IsModuleIfan() && (1 == i)) { // Idx 2 is fanspeed uint8_t svalue = 0; if (domoticz.containsKey("svalue1")) { svalue = domoticz["svalue1"]; } else { return true; // Invalid data } svalue = (nvalue == 2) ? svalue / 10 : 0; if (GetFanspeed() == svalue) { return true; // Stop loop as already set } if (TimePassedSince(domoticz_fan_debounce) < 1000) { return true; // Stop loop if device in limbo } snprintf_P(XdrvMailbox.topic, XdrvMailbox.index, PSTR("/" D_CMND_FANSPEED)); snprintf_P(XdrvMailbox.data, XdrvMailbox.data_len, PSTR("%d"), svalue); found = true; } else #endif // USE_SONOFF_IFAN if (iscolordimmer && 10 == nvalue) { // Color_SetColor JsonObject& color = domoticz["Color"]; uint16_t level = nvalue = domoticz["svalue1"]; uint16_t r = color["r"]; r = r * level / 100; uint16_t g = color["g"]; g = g * level / 100; uint16_t b = color["b"]; b = b * level / 100; uint16_t cw = color["cw"]; cw = cw * level / 100; uint16_t ww = color["ww"]; ww = ww * level / 100; snprintf_P(XdrvMailbox.topic, XdrvMailbox.index, PSTR("/" D_CMND_COLOR)); snprintf_P(XdrvMailbox.data, XdrvMailbox.data_len, PSTR("%02x%02x%02x%02x%02x"), r, g, b, cw, ww); found = true; } else if ((!iscolordimmer && 2 == nvalue) || // gswitch_sSetLevel (iscolordimmer && 15 == nvalue)) { // Color_SetBrightnessLevel if (domoticz.containsKey("svalue1")) { nvalue = domoticz["svalue1"]; } else { return true; // Invalid data } if (light_type && (Settings.light_dimmer == nvalue) && ((power >> i) &1)) { return true; // State already set } snprintf_P(XdrvMailbox.topic, XdrvMailbox.index, PSTR("/" D_CMND_DIMMER)); snprintf_P(XdrvMailbox.data, XdrvMailbox.data_len, PSTR("%d"), nvalue); found = true; } else if (1 == nvalue || 0 == nvalue) { if (((power >> i) &1) == (power_t)nvalue) { return true; // Stop loop } snprintf_P(XdrvMailbox.topic, XdrvMailbox.index, PSTR("/" D_CMND_POWER "%s"), (devices_present > 1) ? stemp1 : ""); snprintf_P(XdrvMailbox.data, XdrvMailbox.data_len, PSTR("%d"), nvalue); found = true; } break; } } } if (!found) { return true; } // No command received AddLog_P2(LOG_LEVEL_DEBUG_MORE, PSTR(D_LOG_DOMOTICZ D_RECEIVED_TOPIC " %s, " D_DATA " %s"), XdrvMailbox.topic, XdrvMailbox.data); domoticz_update_flag = false; return false; // Process new data } /*********************************************************************************************/ bool DomoticzSendKey(uint8_t key, uint8_t device, uint8_t state, uint8_t svalflg) { bool result = false; if (device <= MAX_DOMOTICZ_IDX) { if ((Settings.domoticz_key_idx[device -1] || Settings.domoticz_switch_idx[device -1]) && (svalflg)) { Response_P(PSTR("{\"command\":\"switchlight\",\"idx\":%d,\"switchcmd\":\"%s\"}"), (key) ? Settings.domoticz_switch_idx[device -1] : Settings.domoticz_key_idx[device -1], (state) ? (POWER_TOGGLE == state) ? "Toggle" : "On" : "Off"); MqttPublish(domoticz_in_topic); result = true; } } return result; } /*********************************************************************************************\ * Sensors * * Source : https://www.domoticz.com/wiki/Domoticz_API/JSON_URL%27s * https://www.domoticz.com/wiki/MQTT * * Percentage, Barometric, Air Quality: * {\"idx\":%d,\"nvalue\":%s}, Idx, Value * * Humidity: * {\"idx\":%d,\"nvalue\":%s,\"svalue\":\"%s\"}, Idx, Humidity, HumidityStatus * * All other: * {\"idx\":%d,\"nvalue\":0,\"svalue\":\"%s\"}, Idx, Value(s) * \*********************************************************************************************/ uint8_t DomoticzHumidityState(char *hum) { uint8_t h = atoi(hum); return (!h) ? 0 : (h < 40) ? 2 : (h > 70) ? 3 : 1; } void DomoticzSensor(uint8_t idx, char *data) { if (Settings.domoticz_sensor_idx[idx]) { char dmess[128]; // {"idx":26700,"nvalue":0,"svalue":"22330.1;10234.4;22000.5;10243.4;1006;3000","Battery":100,"RSSI":10} memcpy(dmess, mqtt_data, sizeof(dmess)); if (DZ_AIRQUALITY == idx) { Response_P(PSTR("{\"idx\":%d,\"nvalue\":%s,\"Battery\":%d,\"RSSI\":%d}"), Settings.domoticz_sensor_idx[idx], data, DomoticzBatteryQuality(), DomoticzRssiQuality()); } else { uint8_t nvalue = 0; #ifdef USE_SHUTTER if (DZ_SHUTTER == idx) { uint8_t position = atoi(data); nvalue = position < 2 ? 0 : (position == 100 ? 1 : 2); } #endif // USE_SHUTTER Response_P(DOMOTICZ_MESSAGE, Settings.domoticz_sensor_idx[idx], nvalue, data, DomoticzBatteryQuality(), DomoticzRssiQuality()); } MqttPublish(domoticz_in_topic); memcpy(mqtt_data, dmess, sizeof(dmess)); } } void DomoticzSensor(uint8_t idx, uint32_t value) { char data[16]; snprintf_P(data, sizeof(data), PSTR("%d"), value); DomoticzSensor(idx, data); } void DomoticzTempHumSensor(char *temp, char *hum) { char data[16]; snprintf_P(data, sizeof(data), PSTR("%s;%s;%d"), temp, hum, DomoticzHumidityState(hum)); DomoticzSensor(DZ_TEMP_HUM, data); } void DomoticzTempHumPressureSensor(char *temp, char *hum, char *baro) { char data[32]; snprintf_P(data, sizeof(data), PSTR("%s;%s;%d;%s;5"), temp, hum, DomoticzHumidityState(hum), baro); DomoticzSensor(DZ_TEMP_HUM_BARO, data); } void DomoticzSensorPowerEnergy(int power, char *energy) { char data[16]; snprintf_P(data, sizeof(data), PSTR("%d;%s"), power, energy); DomoticzSensor(DZ_POWER_ENERGY, data); } void DomoticzSensorP1SmartMeter(char *usage1, char *usage2, char *return1, char *return2, int power) { //usage1 = energy usage meter tariff 1, This is an incrementing counter //usage2 = energy usage meter tariff 2, This is an incrementing counter //return1 = energy return meter tariff 1, This is an incrementing counter //return2 = energy return meter tariff 2, This is an incrementing counter //power = if >= 0 actual usage power. if < 0 actual return power (Watt) int consumed = power; int produced = 0; if (power < 0) { consumed = 0; produced = -power; } char data[64]; snprintf_P(data, sizeof(data), PSTR("%s;%s;%s;%s;%d;%d"), usage1, usage2, return1, return2, consumed, produced); DomoticzSensor(DZ_P1_SMART_METER, data); } /*********************************************************************************************\ * Commands \*********************************************************************************************/ void CmndDomoticzIdx(void) { if ((XdrvMailbox.index > 0) && (XdrvMailbox.index <= MAX_DOMOTICZ_IDX)) { if (XdrvMailbox.payload >= 0) { Settings.domoticz_relay_idx[XdrvMailbox.index -1] = XdrvMailbox.payload; restart_flag = 2; } ResponseCmndIdxNumber(Settings.domoticz_relay_idx[XdrvMailbox.index -1]); } } void CmndDomoticzKeyIdx(void) { if ((XdrvMailbox.index > 0) && (XdrvMailbox.index <= MAX_DOMOTICZ_IDX)) { if (XdrvMailbox.payload >= 0) { Settings.domoticz_key_idx[XdrvMailbox.index -1] = XdrvMailbox.payload; } ResponseCmndIdxNumber(Settings.domoticz_key_idx[XdrvMailbox.index -1]); } } void CmndDomoticzSwitchIdx(void) { if ((XdrvMailbox.index > 0) && (XdrvMailbox.index <= MAX_DOMOTICZ_IDX)) { if (XdrvMailbox.payload >= 0) { Settings.domoticz_switch_idx[XdrvMailbox.index -1] = XdrvMailbox.payload; } ResponseCmndIdxNumber(Settings.domoticz_switch_idx[XdrvMailbox.index -1]); } } void CmndDomoticzSensorIdx(void) { if ((XdrvMailbox.index > 0) && (XdrvMailbox.index <= DZ_MAX_SENSORS)) { if (XdrvMailbox.payload >= 0) { Settings.domoticz_sensor_idx[XdrvMailbox.index -1] = XdrvMailbox.payload; } ResponseCmndIdxNumber(Settings.domoticz_sensor_idx[XdrvMailbox.index -1]); } } void CmndDomoticzUpdateTimer(void) { if ((XdrvMailbox.payload >= 0) && (XdrvMailbox.payload < 3601)) { Settings.domoticz_update_timer = XdrvMailbox.payload; } ResponseCmndNumber(Settings.domoticz_update_timer); } /*********************************************************************************************\ * Presentation \*********************************************************************************************/ #ifdef USE_WEBSERVER #define WEB_HANDLE_DOMOTICZ "dm" const char S_CONFIGURE_DOMOTICZ[] PROGMEM = D_CONFIGURE_DOMOTICZ; const char HTTP_BTN_MENU_DOMOTICZ[] PROGMEM = "

"; const char HTTP_FORM_DOMOTICZ[] PROGMEM = "
 " D_DOMOTICZ_PARAMETERS " " "
" ""; const char HTTP_FORM_DOMOTICZ_RELAY[] PROGMEM = "" ""; const char HTTP_FORM_DOMOTICZ_SWITCH[] PROGMEM = ""; const char HTTP_FORM_DOMOTICZ_SENSOR[] PROGMEM = ""; const char HTTP_FORM_DOMOTICZ_TIMER[] PROGMEM = ""; void HandleDomoticzConfiguration(void) { if (!HttpCheckPriviledgedAccess()) { return; } AddLog_P(LOG_LEVEL_DEBUG, S_LOG_HTTP, S_CONFIGURE_DOMOTICZ); if (WebServer->hasArg("save")) { DomoticzSaveSettings(); WebRestart(1); return; } char stemp[40]; WSContentStart_P(S_CONFIGURE_DOMOTICZ); WSContentSendStyle(); WSContentSend_P(HTTP_FORM_DOMOTICZ); for (uint32_t i = 0; i < MAX_DOMOTICZ_IDX; i++) { if (i < devices_present) { WSContentSend_P(HTTP_FORM_DOMOTICZ_RELAY, i +1, i, Settings.domoticz_relay_idx[i], i +1, i, Settings.domoticz_key_idx[i]); } if (pin[GPIO_SWT1 +i] < 99) { WSContentSend_P(HTTP_FORM_DOMOTICZ_SWITCH, i +1, i, Settings.domoticz_switch_idx[i]); } #ifdef USE_SONOFF_IFAN if (IsModuleIfan() && (1 == i)) { break; } #endif // USE_SONOFF_IFAN } for (uint32_t i = 0; i < DZ_MAX_SENSORS; i++) { WSContentSend_P(HTTP_FORM_DOMOTICZ_SENSOR, i +1, GetTextIndexed(stemp, sizeof(stemp), i, kDomoticzSensors), i, Settings.domoticz_sensor_idx[i]); } WSContentSend_P(HTTP_FORM_DOMOTICZ_TIMER, Settings.domoticz_update_timer); WSContentSend_P(PSTR("
" D_DOMOTICZ_IDX " %d
" D_DOMOTICZ_KEY_IDX " %d
" D_DOMOTICZ_SWITCH_IDX " %d
" D_DOMOTICZ_SENSOR_IDX " %d %s
" D_DOMOTICZ_UPDATE_TIMER " (" STR(DOMOTICZ_UPDATE_TIMER) ")
")); WSContentSend_P(HTTP_FORM_END); WSContentSpaceButton(BUTTON_CONFIGURATION); WSContentStop(); } void DomoticzSaveSettings(void) { char stemp[20]; char ssensor_indices[6 * MAX_DOMOTICZ_SNS_IDX]; char tmp[100]; for (uint32_t i = 0; i < MAX_DOMOTICZ_IDX; i++) { snprintf_P(stemp, sizeof(stemp), PSTR("r%d"), i); WebGetArg(stemp, tmp, sizeof(tmp)); Settings.domoticz_relay_idx[i] = (!strlen(tmp)) ? 0 : atoi(tmp); snprintf_P(stemp, sizeof(stemp), PSTR("k%d"), i); WebGetArg(stemp, tmp, sizeof(tmp)); Settings.domoticz_key_idx[i] = (!strlen(tmp)) ? 0 : atoi(tmp); snprintf_P(stemp, sizeof(stemp), PSTR("s%d"), i); WebGetArg(stemp, tmp, sizeof(tmp)); Settings.domoticz_switch_idx[i] = (!strlen(tmp)) ? 0 : atoi(tmp); } ssensor_indices[0] = '\0'; for (uint32_t i = 0; i < DZ_MAX_SENSORS; i++) { snprintf_P(stemp, sizeof(stemp), PSTR("l%d"), i); WebGetArg(stemp, tmp, sizeof(tmp)); Settings.domoticz_sensor_idx[i] = (!strlen(tmp)) ? 0 : atoi(tmp); snprintf_P(ssensor_indices, sizeof(ssensor_indices), PSTR("%s%s%d"), ssensor_indices, (strlen(ssensor_indices)) ? "," : "", Settings.domoticz_sensor_idx[i]); } WebGetArg("ut", tmp, sizeof(tmp)); Settings.domoticz_update_timer = (!strlen(tmp)) ? DOMOTICZ_UPDATE_TIMER : atoi(tmp); AddLog_P2(LOG_LEVEL_INFO, PSTR(D_LOG_DOMOTICZ D_CMND_IDX " %d,%d,%d,%d, " D_CMND_KEYIDX " %d,%d,%d,%d, " D_CMND_SWITCHIDX " %d,%d,%d,%d, " D_CMND_SENSORIDX " %s, " D_CMND_UPDATETIMER " %d"), Settings.domoticz_relay_idx[0], Settings.domoticz_relay_idx[1], Settings.domoticz_relay_idx[2], Settings.domoticz_relay_idx[3], Settings.domoticz_key_idx[0], Settings.domoticz_key_idx[1], Settings.domoticz_key_idx[2], Settings.domoticz_key_idx[3], Settings.domoticz_switch_idx[0], Settings.domoticz_switch_idx[1], Settings.domoticz_switch_idx[2], Settings.domoticz_switch_idx[3], ssensor_indices, Settings.domoticz_update_timer); } #endif // USE_WEBSERVER /*********************************************************************************************\ * Interface \*********************************************************************************************/ bool Xdrv07(uint8_t function) { bool result = false; if (Settings.flag.mqtt_enabled) { // SetOption3 - Enable MQTT switch (function) { case FUNC_EVERY_SECOND: DomoticzMqttUpdate(); break; case FUNC_MQTT_DATA: result = DomoticzMqttData(); break; #ifdef USE_WEBSERVER case FUNC_WEB_ADD_BUTTON: WSContentSend_P(HTTP_BTN_MENU_DOMOTICZ); break; case FUNC_WEB_ADD_HANDLER: WebServer->on("/" WEB_HANDLE_DOMOTICZ, HandleDomoticzConfiguration); break; #endif // USE_WEBSERVER case FUNC_MQTT_SUBSCRIBE: DomoticzMqttSubscribe(); break; case FUNC_MQTT_INIT: domoticz_update_timer = 2; break; case FUNC_SHOW_SENSOR: // DomoticzSendSensor(); break; case FUNC_COMMAND: result = DecodeCommand(kDomoticzCommands, DomoticzCommand); break; } } return result; } #endif // USE_DOMOTICZ