/* settings.h - setting variables for Sonoff-Tasmota Copyright (C) 2018 Theo Arends This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . */ #ifndef _SETTINGS_H_ #define _SETTINGS_H_ #define PARAM8_SIZE 23 // Number of param bytes typedef union { // Restricted by MISRA-C Rule 18.4 but so usefull... uint32_t data; // Allow bit manipulation using SetOption struct { uint32_t save_state : 1; // bit 0 uint32_t button_restrict : 1; // bit 1 uint32_t value_units : 1; // bit 2 uint32_t mqtt_enabled : 1; // bit 3 uint32_t mqtt_response : 1; // bit 4 uint32_t mqtt_power_retain : 1; uint32_t mqtt_button_retain : 1; uint32_t mqtt_switch_retain : 1; uint32_t temperature_conversion : 1; // bit 8 uint32_t mqtt_sensor_retain : 1; uint32_t mqtt_offline : 1; // bit 10 uint32_t button_swap : 1; // bit 11 (v5.1.6) uint32_t stop_flash_rotate : 1; // bit 12 (v5.2.0) uint32_t button_single : 1; // bit 13 (v5.4.0) uint32_t interlock : 1; // bit 14 (v5.6.0) uint32_t pwm_control : 1; // bit 15 (v5.8.1) uint32_t ws_clock_reverse : 1; // bit 16 (v5.8.1) uint32_t decimal_text : 1; // bit 17 (v5.8.1) uint32_t light_signal : 1; // bit 18 (v5.10.0c) uint32_t hass_discovery : 1; // bit 19 (v5.11.1a) uint32_t not_power_linked : 1; // bit 20 (v5.11.1f) uint32_t no_power_on_check : 1; // bit 21 (v5.11.1i) uint32_t mqtt_serial : 1; // bit 22 (v5.12.0f) uint32_t rules_enabled : 1; // bit 23 (v5.12.0j) uint32_t rules_once : 1; // bit 24 (v5.12.0k) uint32_t knx_enabled : 1; // bit 25 (v5.12.0l) KNX uint32_t spare26 : 1; uint32_t spare27 : 1; uint32_t spare28 : 1; uint32_t spare29 : 1; uint32_t spare30 : 1; uint32_t spare31 : 1; }; } SysBitfield; typedef union { uint32_t data; // Allow bit manipulation using SetOption struct { uint32_t spare00 : 1; uint32_t spare01 : 1; uint32_t spare02 : 1; uint32_t spare03 : 1; uint32_t spare04 : 1; uint32_t spare05 : 1; uint32_t spare06 : 1; uint32_t spare07 : 1; uint32_t spare08 : 1; uint32_t spare09 : 1; uint32_t spare10 : 1; uint32_t spare11 : 1; uint32_t spare12 : 1; uint32_t spare13 : 1; uint32_t spare14 : 1; uint32_t current_resolution : 2; uint32_t voltage_resolution : 2; uint32_t wattage_resolution : 2; uint32_t emulation : 2; uint32_t energy_resolution : 3; uint32_t pressure_resolution : 2; uint32_t humidity_resolution : 2; uint32_t temperature_resolution : 2; }; } SysBitfield2; typedef union { uint32_t data; struct { uint32_t time : 11; // bits 0 - 10 = minutes in a day uint32_t window : 4; // bits 11 - 14 = minutes random window uint32_t repeat : 1; // bit 15 uint32_t days : 7; // bits 16 - 22 = week day mask uint32_t device : 4; // bits 23 - 26 = 16 devices uint32_t power : 2; // bits 27 - 28 = 4 power states - Off, On, Toggle, Blink or Rule uint32_t mode : 2; // bits 29 - 30 = timer modes - 0 = Scheduler, 1 = Sunrise, 2 = Sunset uint32_t arm : 1; // bit 31 }; } Timer; struct SYSCFG { unsigned long cfg_holder; // 000 unsigned long save_flag; // 004 unsigned long version; // 008 unsigned long bootcount; // 00C SysBitfield flag; // 010 Add flag since 5.0.2 int16_t save_data; // 014 int8_t timezone; // 016 char ota_url[101]; // 017 char mqtt_prefix[3][11]; // 07C uint8_t baudrate; // 09D byte seriallog_level; // 09E uint8_t sta_config; // 09F byte sta_active; // 0A0 char sta_ssid[2][33]; // 0A1 char sta_pwd[2][65]; // 0E3 char hostname[33]; // 165 char syslog_host[33]; // 186 byte free_1A7[1]; // 1A7 uint16_t syslog_port; // 1A8 byte syslog_level; // 1AA uint8_t webserver; // 1AB byte weblog_level; // 1AC uint8_t mqtt_fingerprint[2][20]; // 1AD byte free_1D5[20]; // 1D5 Free since 5.12.0e char mqtt_host[33]; // 1E9 uint16_t mqtt_port; // 20A char mqtt_client[33]; // 20C char mqtt_user[33]; // 22D char mqtt_pwd[33]; // 24E char mqtt_topic[33]; // 26F char button_topic[33]; // 290 char mqtt_grptopic[33]; // 2B1 uint8_t display_model; // 2D2 uint8_t display_mode; // 2D3 uint8_t display_refresh; // 2D4 uint8_t display_rows; // 2D5 uint8_t display_cols[2]; // 2D6 uint8_t display_address[8]; // 2D8 uint8_t display_dimmer; // 2E0 uint8_t display_size; // 2E1 uint8_t free_2E2[4]; // 2E2 uint16_t pwm_frequency; // 2E6 power_t power; // 2E8 uint16_t pwm_value[MAX_PWMS]; // 2EC int16_t altitude; // 2F6 Add since 5.8.0i uint16_t tele_period; // 2F8 uint8_t ex_power; // 2FA Not used since 5.8.0j uint8_t ledstate; // 2FB uint8_t param[PARAM8_SIZE]; // 2FC was domoticz_in_topic until 5.1.6 char state_text[4][11]; // 313 uint8_t energy_power_delta; // 33F uint16_t domoticz_update_timer; // 340 uint16_t pwm_range; // 342 unsigned long domoticz_relay_idx[MAX_DOMOTICZ_IDX]; // 344 unsigned long domoticz_key_idx[MAX_DOMOTICZ_IDX]; // 354 unsigned long energy_power_calibration; // 364 unsigned long energy_voltage_calibration; // 368 unsigned long energy_current_calibration; // 36C unsigned long energy_kWhtoday; // 370 unsigned long energy_kWhyesterday; // 374 uint16_t energy_kWhdoy; // 378 uint16_t energy_min_power; // 37A uint16_t energy_max_power; // 37C uint16_t energy_min_voltage; // 37E uint16_t energy_max_voltage; // 380 uint16_t energy_min_current; // 382 uint16_t energy_max_current; // 384 uint16_t energy_max_power_limit; // 386 MaxPowerLimit uint16_t energy_max_power_limit_hold; // 388 MaxPowerLimitHold uint16_t energy_max_power_limit_window; // 38A MaxPowerLimitWindow uint16_t energy_max_power_safe_limit; // 38C MaxSafePowerLimit uint16_t energy_max_power_safe_limit_hold; // 38E MaxSafePowerLimitHold uint16_t energy_max_power_safe_limit_window; // 390 MaxSafePowerLimitWindow uint16_t energy_max_energy; // 392 MaxEnergy uint16_t energy_max_energy_start; // 394 MaxEnergyStart uint16_t mqtt_retry; // 396 uint8_t poweronstate; // 398 uint8_t last_module; // 399 uint16_t blinktime; // 39A uint16_t blinkcount; // 39C uint16_t light_rotation; // 39E uint8_t ws_red; // 3A0 Not used since 5.8.0 uint8_t ws_green; // 3A1 Not used since 5.8.0 uint8_t ws_blue; // 3A2 Not used since 5.8.0 uint8_t ws_ledtable; // 3A3 Not used since 5.8.0 uint8_t ws_dimmer; // 3A4 Not used since 5.8.0 uint8_t ws_fade; // 3A5 Not used since 5.8.0 uint8_t ws_speed; // 3A6 Not used since 5.8.0 uint8_t ws_scheme; // 3A7 Not used since 5.8.0 uint8_t ex_ws_width; // 3A8 Not used since 5.8.0 byte free_3A9[1]; // 3A9 uint16_t ws_wakeup; // 3AA Not used since 5.8.0 char friendlyname[MAX_FRIENDLYNAMES][33]; // 3AC char switch_topic[33]; // 430 char serial_delimiter; // 451 uint8_t sbaudrate; // 452 uint8_t sleep; // 453 uint16_t domoticz_switch_idx[MAX_DOMOTICZ_IDX]; // 454 uint16_t domoticz_sensor_idx[MAX_DOMOTICZ_SNS_IDX]; // 45C uint8_t module; // 474 uint8_t ws_color[4][3]; // 475 uint8_t ws_width[3]; // 481 myio my_gp; // 484 uint16_t light_pixels; // 496 uint8_t light_color[5]; // 498 uint8_t light_correction; // 49D uint8_t light_dimmer; // 49E byte free_49F[2]; // 49F uint8_t light_fade; // 4A1 uint8_t light_speed; // 4A2 uint8_t light_scheme; // 4A3 uint8_t light_width; // 4A4 byte knx_GA_registered; // 4A5 Number of Group Address to read uint16_t light_wakeup; // 4A6 byte knx_CB_registered; // 4A8 Number of Group Address to write char web_password[33]; // 4A9 uint8_t switchmode[MAX_SWITCHES]; // 4CA char ntp_server[3][33]; // 4CE byte ina219_mode; // 531 uint16_t pulse_timer[MAX_PULSETIMERS]; // 532 byte free_542[2]; // 542 uint32_t ip_address[4]; // 544 unsigned long energy_kWhtotal; // 554 char mqtt_fulltopic[100]; // 558 SysBitfield2 flag2; // 5BC Add flag2 since 5.9.2 unsigned long pulse_counter[MAX_COUNTERS]; // 5C0 uint16_t pulse_counter_type; // 5D0 uint16_t pulse_counter_debounce; // 5D2 uint8_t rf_code[17][9]; // 5D4 byte free_66d[3]; // 66D Timer timer[MAX_TIMERS]; // 670 int latitude; // 6B0 int longitude; // 6B4 uint16_t knx_physsical_addr; // 6B8 (address_t is a uint16_t) uint16_t knx_GA_addr[MAX_KNX_GA]; // 6BA (address_t is a uint16_t) x KNX_max_GA uint16_t knx_CB_addr[MAX_KNX_CB]; // 6CE (address_t is a uint16_t) x KNX_max_CB byte knx_GA_param[MAX_KNX_GA]; // 6E2 Type of Input (relay changed, button pressed, sensor read <-teleperiod) byte knx_CB_param[MAX_KNX_CB]; // 6EC Type of Output (set relay, toggle relay, reply sensor value) byte free_6f6[266]; // 6F6 char rules[MAX_RULE_SIZE]; // 800 uses 512 bytes in v5.12.0m // A00 - FFF free locations } Settings; struct RTCMEM { uint16_t valid; // 000 byte oswatch_blocked_loop; // 002 uint8_t ota_loader; // 003 unsigned long energy_kWhtoday; // 004 unsigned long energy_kWhtotal; // 008 unsigned long pulse_counter[MAX_COUNTERS]; // 00C power_t power; // 01C } RtcSettings; struct TIME_T { uint8_t second; uint8_t minute; uint8_t hour; uint8_t day_of_week; // sunday is day 1 uint8_t day_of_month; uint8_t month; char name_of_month[4]; uint16_t day_of_year; uint16_t year; unsigned long days; unsigned long valid; } RtcTime; struct TimeChangeRule { uint8_t hemis; // 0-Northern, 1=Southern Hemisphere (=Opposite DST/STD) uint8_t week; // 1=First, 2=Second, 3=Third, 4=Fourth, or 0=Last week of the month uint8_t dow; // day of week, 1=Sun, 2=Mon, ... 7=Sat uint8_t month; // 1=Jan, 2=Feb, ... 12=Dec uint8_t hour; // 0-23 int offset; // offset from UTC in minutes }; TimeChangeRule DaylightSavingTime = { TIME_DST }; // Daylight Saving Time TimeChangeRule StandardTime = { TIME_STD }; // Standard Time struct XDRVMAILBOX { uint16_t valid; uint16_t index; uint16_t data_len; uint16_t payload16; int16_t payload; uint8_t grpflg; uint8_t notused; char *topic; char *data; } XdrvMailbox; // See issue https://github.com/esp8266/Arduino/issues/2913 #ifdef USE_ADC_VCC ADC_MODE(ADC_VCC); // Set ADC input for Power Supply Voltage usage #endif #endif // _SETTINGS_H_