/* sonoff_template.h - template settings for Sonoff-Tasmota Copyright (C) 2017 Theo Arends This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . */ // User selectable GPIO functionality enum upins_t { GPIO_NONE, // Not used GPIO_DHT11, // DHT11 GPIO_DHT21, // DHT21, AM2301 GPIO_DHT22, // DHT22, AM2302, AM2321 GPIO_DSB, // Single wire DS18B20 or DS18S20 GPIO_I2C_SCL, // I2C SCL GPIO_I2C_SDA, // I2C SDA GPIO_WS2812, // WS2812 Led string GPIO_IRSEND, // IR remote GPIO_SWT1, // User connected external switches GPIO_SWT2, GPIO_SWT3, GPIO_SWT4, GPIO_KEY1, // Button usually connected to GPIO0 GPIO_KEY2, GPIO_KEY3, GPIO_KEY4, GPIO_REL1, // Relays GPIO_REL2, GPIO_REL3, GPIO_REL4, GPIO_REL1_INV, GPIO_REL2_INV, GPIO_REL3_INV, GPIO_REL4_INV, GPIO_LED1, // Leds GPIO_LED2, GPIO_LED3, GPIO_LED4, GPIO_LED1_INV, GPIO_LED2_INV, GPIO_LED3_INV, GPIO_LED4_INV, GPIO_PWM1, // Sonoff Led Cold GPIO_PWM2, // Sonoff Led Warm GPIO_PWM3, // Red (swapped with Blue from original) GPIO_PWM4, // Green GPIO_PWM5, // Blue (swapped with Red from original) GPIO_CNTR1, GPIO_CNTR2, GPIO_CNTR3, GPIO_CNTR4, GPIO_SENSOR_END }; // Text in webpage Module Parameters and commands GPIOS and GPIO const char sensors[GPIO_SENSOR_END][9] PROGMEM = { D_SENSOR_NONE, D_SENSOR_DHT11, D_SENSOR_AM2301, D_SENSOR_DHT22, D_SENSOR_DS18X20, D_SENSOR_I2C_SCL, D_SENSOR_I2C_SDA, D_SENSOR_WS2812, D_SENSOR_IRREMOTE, D_SENSOR_SWITCH "1", D_SENSOR_SWITCH "2", D_SENSOR_SWITCH "3", D_SENSOR_SWITCH "4", D_SENSOR_BUTTON "1", D_SENSOR_BUTTON "2", D_SENSOR_BUTTON "3", D_SENSOR_BUTTON "4", D_SENSOR_RELAY "1", D_SENSOR_RELAY "2", D_SENSOR_RELAY "3", D_SENSOR_RELAY "4", D_SENSOR_RELAY "1I", D_SENSOR_RELAY "2I", D_SENSOR_RELAY "3I", D_SENSOR_RELAY "4I", D_SENSOR_LED "1", D_SENSOR_LED "2", D_SENSOR_LED "3", D_SENSOR_LED "4", D_SENSOR_LED "1I", D_SENSOR_LED "2I", D_SENSOR_LED "3I", D_SENSOR_LED "4I", D_SENSOR_PWM "1", D_SENSOR_PWM "2", D_SENSOR_PWM "3", D_SENSOR_PWM "4", D_SENSOR_PWM "5", D_SENSOR_COUNTER "1", D_SENSOR_COUNTER "2", D_SENSOR_COUNTER "3", D_SENSOR_COUNTER "4" }; // Programmer selectable GPIO functionality offset by user selectable GPIOs enum fpins_t { GPIO_RXD = GPIO_SENSOR_END, // Serial interface GPIO_TXD, // Serial interface GPIO_HLW_SEL, // HLW8012 Sel output (Sonoff Pow) GPIO_HLW_CF1, // HLW8012 CF1 voltage / current (Sonoff Pow) GPIO_HLW_CF, // HLW8012 CF power (Sonoff Pow) GPIO_ADC0, // ADC GPIO_DI, // my92x1 PWM input GPIO_DCKI, // my92x1 CLK input GPIO_USER, // User configurable GPIO_MAX }; /********************************************************************************************/ // Supported hardware modules enum module_t { SONOFF_BASIC, SONOFF_RF, SONOFF_SV, SONOFF_TH, SONOFF_DUAL, SONOFF_POW, SONOFF_4CH, S20, SLAMPHER, SONOFF_TOUCH, SONOFF_LED, CH1, CH4, MOTOR, ELECTRODRAGON, EXS_RELAY, WION, WEMOS, SONOFF_DEV, H801, SONOFF_SC, SONOFF_BN, SONOFF_4CHPRO, HUAFAN_SS, SONOFF_BRIDGE, SONOFF_B1, AILIGHT, SONOFF_T11, SONOFF_T12, SONOFF_T13, SUPLA1, WITTY, YUNSHAN, MAXMODULE }; /********************************************************************************************/ #define MAX_GPIO_PIN 18 // Number of supported GPIO typedef struct MYIO { uint8_t io[MAX_GPIO_PIN]; } myio; typedef struct MYTMPLT { char name[15]; myio gp; } mytmplt; const uint8_t nicelist[MAXMODULE] PROGMEM = { SONOFF_BASIC, SONOFF_RF, SONOFF_TH, SONOFF_DUAL, SONOFF_POW, SONOFF_4CH, SONOFF_4CHPRO, SONOFF_SV, SONOFF_DEV, S20, SLAMPHER, SONOFF_TOUCH, SONOFF_T11, SONOFF_T12, SONOFF_T13, SONOFF_SC, SONOFF_B1, SONOFF_LED, SONOFF_BN, SONOFF_BRIDGE, CH1, CH4, MOTOR, ELECTRODRAGON, EXS_RELAY, SUPLA1, YUNSHAN, WION, H801, HUAFAN_SS, AILIGHT, WEMOS, WITTY }; // Default module settings const mytmplt modules[MAXMODULE] PROGMEM = { { "Sonoff Basic", // Sonoff Basic (ESP8266) GPIO_KEY1, // GPIO00 Button GPIO_USER, // GPIO01 Serial RXD and Optional sensor 0, // GPIO02 GPIO_USER, // GPIO03 Serial TXD and Optional sensor GPIO_USER, // GPIO04 Optional sensor 0, // GPIO05 0, // GPIO06 (SD_CLK Flash) 0, // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) 0, // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) 0, // GPIO09 (SD_DATA2 Flash QIO) 0, // GPIO10 (SD_DATA3 Flash QIO) 0, // GPIO11 (SD_CMD Flash) GPIO_REL1, // GPIO12 Red Led and Relay (0 = Off, 1 = On) GPIO_LED1_INV, // GPIO13 Green Led (0 = On, 1 = Off) GPIO_USER, // GPIO14 Optional sensor 0, // GPIO15 0, // GPIO16 0 // ADC0 Analog input }, { "Sonoff RF", // Sonoff RF (ESP8266) GPIO_KEY1, // GPIO00 Button GPIO_USER, // GPIO01 Serial RXD and Optional sensor 0, GPIO_USER, // GPIO03 Serial TXD and Optional sensor GPIO_USER, // GPIO04 Optional sensor 0, 0, 0, 0, 0, 0, 0, // Flash connection GPIO_REL1, // GPIO12 Red Led and Relay (0 = Off, 1 = On) GPIO_LED1_INV, // GPIO13 Green Led (0 = On, 1 = Off) GPIO_USER, // GPIO14 Optional sensor 0, 0, 0 }, { "Sonoff SV", // Sonoff SV (ESP8266) GPIO_KEY1, // GPIO00 Button GPIO_USER, // GPIO01 Serial RXD and Optional sensor 0, GPIO_USER, // GPIO03 Serial TXD and Optional sensor GPIO_USER, // GPIO04 Optional sensor GPIO_USER, // GPIO05 Optional sensor 0, 0, 0, 0, 0, 0, // Flash connection GPIO_REL1, // GPIO12 Red Led and Relay (0 = Off, 1 = On) GPIO_LED1_INV, // GPIO13 Green Led (0 = On, 1 = Off) GPIO_USER, // GPIO14 Optional sensor 0, 0, GPIO_ADC0 // ADC0 Analog input }, { "Sonoff TH", // Sonoff TH10/16 (ESP8266) GPIO_KEY1, // GPIO00 Button GPIO_USER, // GPIO01 Serial RXD and Optional sensor 0, GPIO_USER, // GPIO03 Serial TXD and Optional sensor GPIO_USER, // GPIO04 Optional sensor 0, 0, 0, 0, 0, 0, 0, // Flash connection GPIO_REL1, // GPIO12 Red Led and Relay (0 = Off, 1 = On) GPIO_LED1_INV, // GPIO13 Green Led (0 = On, 1 = Off) GPIO_USER, // GPIO14 Optional sensor 0, 0, 0 }, { "Sonoff Dual", // Sonoff Dual (ESP8266) 0, GPIO_TXD, // GPIO01 Relay control 0, GPIO_RXD, // GPIO03 Relay control GPIO_USER, // GPIO04 Optional sensor 0, 0, 0, 0, 0, 0, 0, // Flash connection 0, GPIO_LED1_INV, // GPIO13 Blue Led (0 = On, 1 = Off) GPIO_USER, // GPIO14 Optional sensor 0, 0, 0 }, { "Sonoff Pow", // Sonoff Pow (ESP8266) GPIO_KEY1, // GPIO00 Button 0, 0, 0, 0, GPIO_HLW_SEL, // GPIO05 HLW8012 Sel output 0, 0, 0, 0, 0, 0, // Flash connection GPIO_REL1, // GPIO12 Red Led and Relay (0 = Off, 1 = On) GPIO_HLW_CF1, // GPIO13 HLW8012 CF1 voltage / current GPIO_HLW_CF, // GPIO14 HLW8012 CF power GPIO_LED1, // GPIO15 Green Led (0 = On, 1 = Off) 0, 0 }, { "Sonoff 4CH", // Sonoff 4CH (ESP8285) GPIO_KEY1, // GPIO00 Button 1 GPIO_USER, // GPIO01 Serial RXD and Optional sensor GPIO_USER, // GPIO02 Optional sensor GPIO_USER, // GPIO03 Serial TXD and Optional sensor GPIO_REL3, // GPIO04 Sonoff 4CH Red Led and Relay 3 (0 = Off, 1 = On) GPIO_REL2, // GPIO05 Sonoff 4CH Red Led and Relay 2 (0 = Off, 1 = On) 0, 0, 0, // Flash connection GPIO_KEY2, // GPIO09 Button 2 GPIO_KEY3, // GPIO10 Button 3 0, // Flash connection GPIO_REL1, // GPIO12 Red Led and Relay 1 (0 = Off, 1 = On) GPIO_LED1_INV, // GPIO13 Blue Led (0 = On, 1 = Off) GPIO_KEY4, // GPIO14 Button 4 GPIO_REL4, // GPIO15 Red Led and Relay 4 (0 = Off, 1 = On) 0, 0 }, { "S20 Socket", // S20 Smart Socket (ESP8266) GPIO_KEY1, // GPIO00 Button GPIO_USER, // GPIO01 Serial RXD and Optional sensor 0, GPIO_USER, // GPIO03 Serial TXD and Optional sensor 0, 0, 0, 0, 0, 0, 0, 0, // Flash connection GPIO_REL1, // GPIO12 Red Led and Relay (0 = Off, 1 = On) GPIO_LED1_INV, // GPIO13 Green Led (0 = On, 1 = Off) 0, 0, 0, 0 }, { "Slampher", // Slampher (ESP8266) GPIO_KEY1, // GPIO00 Button GPIO_USER, // GPIO01 Serial RXD and Optional sensor 0, GPIO_USER, // GPIO03 Serial TXD and Optional sensor 0, 0, 0, 0, 0, 0, 0, 0, // Flash connection GPIO_REL1, // GPIO12 Red Led and Relay (0 = Off, 1 = On) GPIO_LED1_INV, // GPIO13 Blue Led (0 = On, 1 = Off) 0, 0, 0, 0 }, { "Sonoff Touch", // Sonoff Touch (ESP8285) GPIO_KEY1, // GPIO00 Button GPIO_USER, // GPIO01 Serial RXD and Optional sensor 0, GPIO_USER, // GPIO03 Serial TXD and Optional sensor 0, 0, 0, 0, 0, // Flash connection 0, 0, 0, // Flash connection GPIO_REL1, // GPIO12 Red Led and Relay (0 = Off, 1 = On) GPIO_LED1_INV, // GPIO13 Blue Led (0 = On, 1 = Off) 0, 0, 0, 0 }, { "Sonoff LED", // Sonoff LED (ESP8266) GPIO_KEY1, // GPIO00 Button 0, 0, 0, GPIO_USER, // GPIO04 Optional sensor (PWM3 Green) GPIO_USER, // GPIO05 Optional sensor (PWM2 Red) 0, 0, 0, 0, 0, 0, // Flash connection GPIO_PWM1, // GPIO12 Cold light (PWM0 Cold) GPIO_LED1_INV, // GPIO13 Blue Led (0 = On, 1 = Off) GPIO_PWM2, // GPIO14 Warm light (PWM1 Warm) GPIO_USER, // GPIO15 Optional sensor (PWM4 Blue) 0, 0 }, { "1 Channel", // 1 Channel Inching/Latching Relay using (PSA-B01 - ESP8266 and PSF-B01 - ESP8285) GPIO_KEY1, // GPIO00 Button 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, // Flash connection GPIO_REL1, // GPIO12 Red Led and Relay (0 = Off, 1 = On) GPIO_LED1_INV, // GPIO13 Green Led (0 = On, 1 = Off) 0, 0, 0, 0 }, { "4 Channel", // 4 Channel Inching/Latching Relays (ESP8266) 0, GPIO_TXD, // GPIO01 Relay control 0, GPIO_RXD, // GPIO03 Relay control 0, 0, 0, 0, 0, 0, 0, 0, // Flash connection 0, GPIO_LED1_INV, // GPIO13 Blue Led (0 = On, 1 = Off) 0, 0, 0, 0 }, { "Motor C/AC", // Motor Clockwise / Anti clockwise (PSA-B01 - ESP8266) GPIO_KEY1, // GPIO00 Button 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, // Flash connection GPIO_REL1, // GPIO12 Red Led and Relay (0 = Off, 1 = On) GPIO_LED1_INV, // GPIO13 Green Led (0 = On, 1 = Off) 0, 0, 0, 0 }, { "ElectroDragon", // ElectroDragon IoT Relay Board (ESP8266) GPIO_KEY2, // GPIO00 Button 2 GPIO_USER, // GPIO01 Serial RXD and Optional sensor GPIO_KEY1, // GPIO02 Button 1 GPIO_USER, // GPIO03 Serial TXD and Optional sensor GPIO_USER, // GPIO04 Optional sensor GPIO_USER, // GPIO05 Optional sensor 0, 0, 0, 0, 0, 0, // Flash connection GPIO_REL2, // GPIO12 Red Led and Relay 2 (0 = Off, 1 = On) GPIO_REL1, // GPIO13 Red Led and Relay 1 (0 = Off, 1 = On) GPIO_USER, // GPIO14 Optional sensor GPIO_USER, // GPIO15 Optional sensor GPIO_LED1, // GPIO16 Green/Blue Led (1 = On, 0 = Off) GPIO_ADC0 // ADC0 A0 Analog input }, { "EXS Relay", // Latching relay https://ex-store.de/ESP8266-WiFi-Relay-V31 (ESP8266) // Module Pin 1 VCC 3V3, Module Pin 6 GND GPIO_KEY1, // GPIO00 Module Pin 8 - Button (firmware flash) GPIO_USER, // GPIO01 Module Pin 2 = UART0_TXD GPIO_USER, // GPIO02 Module Pin 7 GPIO_USER, // GPIO03 Module Pin 3 = UART0_RXD GPIO_USER, // GPIO04 Module Pin 10 GPIO_USER, // GPIO05 Module Pin 9 0, 0, 0, 0, 0, 0, // Flash connection GPIO_REL1, // GPIO12 Relay1 ( 1 = Off) GPIO_REL2, // GPIO13 Relay1 ( 1 = On) GPIO_USER, // GPIO14 Module Pin 5 0, GPIO_USER, // GPIO16 Module Pin 4 0 }, { "WiOn", // Indoor Tap https://www.amazon.com/gp/product/B00ZYLUBJU/ref=s9_acsd_al_bw_c_x_3_w (ESP8266) GPIO_USER, // GPIO00 Optional sensor (pm clock) 0, GPIO_LED1, // GPIO02 Green Led (1 = On, 0 = Off) 0, 0, 0, 0, 0, 0, 0, 0, 0, // Flash connection GPIO_USER, // GPIO12 Optional sensor (pm data) GPIO_KEY1, // GPIO13 Button 0, GPIO_REL1, // GPIO15 Relay (0 = Off, 1 = On) 0, 0 }, { "WeMos D1 mini", // WeMos and NodeMCU hardware (ESP8266) GPIO_USER, // GPIO00 D3 Wemos Button Shield GPIO_USER, // GPIO01 TX Serial RXD GPIO_USER, // GPIO02 D4 Wemos DHT Shield GPIO_USER, // GPIO03 RX Serial TXD and Optional sensor GPIO_USER, // GPIO04 D2 Wemos I2C SDA GPIO_USER, // GPIO05 D1 Wemos I2C SCL / Wemos Relay Shield (0 = Off, 1 = On) / Wemos WS2812B RGB led Shield 0, 0, 0, 0, 0, 0, // Flash connection GPIO_USER, // GPIO12 D6 GPIO_USER, // GPIO13 D7 GPIO_USER, // GPIO14 D5 GPIO_USER, // GPIO15 D8 GPIO_USER, // GPIO16 D0 Wemos Wake GPIO_ADC0 // ADC0 A0 Analog input }, { "Sonoff Dev", // Sonoff Dev (ESP8266) GPIO_KEY1, // GPIO00 E-FW Button GPIO_USER, // GPIO01 TX Serial RXD and Optional sensor 0, // GPIO02 GPIO_USER, // GPIO03 RX Serial TXD and Optional sensor GPIO_USER, // GPIO04 Optional sensor GPIO_USER, // GPIO05 Optional sensor 0, 0, 0, 0, 0, 0, // Flash connection GPIO_USER, // GPIO12 GPIO_LED1_INV, // GPIO13 BLUE LED GPIO_USER, // GPIO14 Optional sensor 0, // GPIO15 0, // GPIO16 GPIO_ADC0 // ADC0 A0 Analog input }, { "H801", // Lixada H801 Wifi (ESP8266) GPIO_KEY1, // GPIO00 E-FW Button GPIO_LED1, // GPIO01 Green LED GPIO_TXD, // GPIO02 RX - Pin next to TX on the PCB GPIO_RXD, // GPIO03 TX - Pin next to GND on the PCB GPIO_PWM2, // GPIO04 W2 GPIO_LED2_INV, // GPIO05 Red LED 0, 0, 0, 0, 0, 0, // Flash connection GPIO_PWM3, // GPIO12 Blue GPIO_PWM4, // GPIO13 Green GPIO_PWM1, // GPIO14 W1 GPIO_PWM5, // GPIO15 Red 0, 0 }, { "Sonoff SC", // Sonoff SC (ESP8266) GPIO_KEY1, // GPIO00 Button GPIO_TXD, // GPIO01 RXD to ATMEGA328P GPIO_USER, // GPIO02 Optional sensor GPIO_RXD, // GPIO03 TXD to ATMEGA328P 0, 0, 0, 0, 0, 0, 0, 0, // Flash connection 0, GPIO_LED1_INV, // GPIO13 Green Led (0 = On, 1 = Off) 0, 0, 0, 0 }, { "Sonoff BN-SZ", // Sonoff BN-SZ01 Ceiling led (ESP8285) 0, 0, 0, 0, 0, 0, 0, 0, 0, // Flash connection 0, 0, 0, // Flash connection GPIO_PWM1, // GPIO12 Light GPIO_LED1_INV, // GPIO13 Red Led (0 = On, 1 = Off) 0, 0, 0, 0 }, { "Sonoff 4CH Pro", // Sonoff 4CH Pro (ESP8285) GPIO_KEY1, // GPIO00 Button 1 GPIO_USER, // GPIO01 Serial RXD and Optional sensor GPIO_USER, // GPIO02 Optional sensor GPIO_USER, // GPIO03 Serial TXD and Optional sensor GPIO_REL3, // GPIO04 Sonoff 4CH Red Led and Relay 3 (0 = Off, 1 = On) GPIO_REL2, // GPIO05 Sonoff 4CH Red Led and Relay 2 (0 = Off, 1 = On) 0, 0, 0, // Flash connection GPIO_KEY2, // GPIO09 Button 2 GPIO_KEY3, // GPIO10 Button 3 0, // Flash connection GPIO_REL1, // GPIO12 Red Led and Relay 1 (0 = Off, 1 = On) GPIO_LED1_INV, // GPIO13 Blue Led (0 = On, 1 = Off) GPIO_KEY4, // GPIO14 Button 4 GPIO_REL4, // GPIO15 Red Led and Relay 4 (0 = Off, 1 = On) 0, 0 }, { "Huafan SS", // Hua Fan Smart Socket (ESP8266) - like Sonoff Pow GPIO_LED1_INV, // GPIO0 Blue Led (0 = On, 1 = Off) 0, 0, GPIO_LED2_INV, // GPIO3 Red Led (0 = On, 1 = Off) GPIO_KEY1, // GPIO4 Button GPIO_REL1_INV, // GPIO5 Relay (0 = On, 1 = Off) 0, 0, 0, 0, 0, 0, // Flash connection GPIO_HLW_CF1, // GPIO12 HLW8012 CF1 voltage / current GPIO_HLW_SEL, // GPIO13 HLW8012 Sel output GPIO_HLW_CF, // GPIO14 HLW8012 CF power 0, 0, 0 }, { "Sonoff Bridge", // Sonoff RF Bridge 433 (ESP8285) GPIO_KEY1, // GPIO00 Button GPIO_TXD, // GPIO01 RF bridge control GPIO_USER, // GPIO02 Optional sensor GPIO_RXD, // GPIO03 RF bridge control GPIO_USER, // GPIO04 Optional sensor GPIO_USER, // GPIO05 Optional sensor 0, 0, 0, // Flash connection 0, 0, 0, // Flash connection 0, GPIO_LED1_INV, // GPIO13 Blue Led (0 = On, 1 = Off) 0, 0, 0, 0 }, { "Sonoff B1", // Sonoff B1 (ESP8285 - my9231) GPIO_KEY1, // GPIO00 Pad GPIO_USER, // GPIO01 Serial RXD and Optional sensor pad GPIO_USER, // GPIO02 Optional sensor SDA pad GPIO_USER, // GPIO03 Serial TXD and Optional sensor pad 0, 0, 0, 0, 0, // Flash connection 0, 0, 0, // Flash connection GPIO_DI, // GPIO12 my9231 DI 0, GPIO_DCKI, // GPIO14 my9231 DCKI 0, 0, 0 }, { "AiLight", // Ai-Thinker RGBW led (ESP8266 - my9291) GPIO_KEY1, // GPIO00 Pad GPIO_USER, // GPIO01 Serial RXD and Optional sensor pad GPIO_USER, // GPIO02 Optional sensor SDA pad GPIO_USER, // GPIO03 Serial TXD and Optional sensor pad 0, 0, 0, 0, 0, // Flash connection 0, 0, 0, // Flash connection 0, GPIO_DI, // GPIO13 my9291 DI 0, GPIO_DCKI, // GPIO15 my9291 DCKI 0, 0 }, { "Sonoff T1 1CH", // Sonoff T1 1CH (ESP8285) GPIO_KEY1, // GPIO00 Button 1 GPIO_USER, // GPIO01 Serial RXD and Optional sensor 0, GPIO_USER, // GPIO03 Serial TXD and Optional sensor 0, 0, 0, 0, 0, // Flash connection 0, 0, 0, // Flash connection GPIO_REL1, // GPIO12 Blue Led and Relay 1 (0 = Off, 1 = On) GPIO_LED1_INV, // GPIO13 Blue Led (0 = On, 1 = Off) 0, 0, 0, 0 }, { "Sonoff T1 2CH", // Sonoff T1 2CH (ESP8285) GPIO_KEY1, // GPIO00 Button 1 GPIO_USER, // GPIO01 Serial RXD and Optional sensor 0, GPIO_USER, // GPIO03 Serial TXD and Optional sensor 0, GPIO_REL2, // GPIO05 Blue Led and Relay 2 (0 = Off, 1 = On) 0, 0, 0, // Flash connection GPIO_KEY2, // GPIO09 Button 2 0, 0, // Flash connection GPIO_REL1, // GPIO12 Blue Led and Relay 1 (0 = Off, 1 = On) GPIO_LED1_INV, // GPIO13 Blue Led (0 = On, 1 = Off) 0, 0, 0, 0 }, { "Sonoff T1 3CH", // Sonoff T1 3CH (ESP8285) GPIO_KEY1, // GPIO00 Button 1 GPIO_USER, // GPIO01 Serial RXD and Optional sensor 0, GPIO_USER, // GPIO03 Serial TXD and Optional sensor GPIO_REL3, // GPIO04 Blue Led and Relay 3 (0 = Off, 1 = On) GPIO_REL2, // GPIO05 Blue Led and Relay 2 (0 = Off, 1 = On) 0, 0, 0, // Flash connection GPIO_KEY2, // GPIO09 Button 2 GPIO_KEY3, // GPIO10 Button 3 0, // Flash connection GPIO_REL1, // GPIO12 Blue Led and Relay 1 (0 = Off, 1 = On) GPIO_LED1_INV, // GPIO13 Blue Led (0 = On, 1 = Off) 0, 0, 0, 0 }, { "Supla Espablo", // Supla Espablo (ESP8266) - http://www.wykop.pl/ramka/3325399/diy-supla-do-puszki-instalacyjnej-podtynkowej-supla-org/ 0, // GPIO00 Flash jumper GPIO_USER, // GPIO01 Serial RXD and Optional sensor GPIO_DSB, // GPIO02 DS18B20 sensor GPIO_USER, // GPIO03 Serial TXD and Optional sensor GPIO_KEY1, // GPIO04 Button 1 GPIO_REL1, // GPIO05 Relay 1 (0 = Off, 1 = On) 0, 0, 0, 0, 0, 0, // Flash connection GPIO_USER, // GPIO12 Optional sensor GPIO_REL2, // GPIO13 Relay 2 (0 = Off, 1 = On) GPIO_USER, // GPIO14 Optional sensor 0, GPIO_LED1, // GPIO16 Led (1 = On, 0 = Off) GPIO_ADC0 // ADC0 A0 Analog input }, { "Witty Cloud", // Witty Cloud Dev Board (ESP8266) - https://www.aliexpress.com/item/ESP8266-serial-WIFI-Witty-cloud-Development-Board-ESP-12F-module-MINI-nodemcu/32643464555.html GPIO_USER, // GPIO00 D3 flash push button on interface board GPIO_USER, // GPIO01 Serial RXD and Optional sensor GPIO_LED1_INV, // GPIO02 D4 Blue Led (0 = On, 1 = Off) on ESP-12F GPIO_USER, // GPIO03 Serial TXD and Optional sensor GPIO_KEY1, // GPIO04 D2 push button on ESP-12F board GPIO_USER, // GPIO05 D1 optional sensor 0, 0, 0, 0, 0, 0, // Flash connection GPIO_PWM4, // GPIO12 D6 RGB LED Green GPIO_PWM5, // GPIO13 D7 RGB LED Blue GPIO_USER, // GPIO14 D5 optional sensor GPIO_PWM3, // GPIO15 D8 RGB LED Red GPIO_USER, // GPIO16 D0 optional sensor GPIO_ADC0 // ADC0 A0 Light sensor / Requires USE_ADC_VCC in user_config.h to be disabled }, { "Yunshan Relay", // Yunshan Wifi Relay (ESP8266) - https://www.ebay.com/p/Esp8266-220v-10a-Network-Relay-WiFi-Module/1369583381 // Schematics and Info https://ucexperiment.wordpress.com/2016/12/18/yunshan-esp8266-250v-15a-acdc-network-wifi-relay-module/ 0, // GPIO00 Flash jumper - Module Pin 8 GPIO_USER, // GPIO01 Serial RXD and Optional sensor - Module Pin 2 GPIO_LED1_INV, // GPIO02 Blue Led (0 = On, 1 = Off) on ESP-12F - Module Pin 7 GPIO_USER, // GPIO03 Serial TXD and Optional sensor - Module Pin 3 GPIO_REL1, // GPIO04 Red Led and Relay (0 = Off, 1 = On) - Module Pin 10 GPIO_KEY1, // GPIO05 Blue Led and OptoCoupler input - Module Pin 9 0, 0, 0, 0, 0, 0, // Flash connection 0, 0, 0, 0, 0 } };