/* nl-NL.h - localization for Dutch - Nederland for Tasmota Copyright (C) 2020 Theo Arends This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . */ #ifndef _LANGUAGE_NL_NL_H_ #define _LANGUAGE_NL_NL_H_ /*************************** ATTENTION *******************************\ * * Due to memory constraints only UTF-8 is supported. * To save code space keep text as short as possible. * Time and Date provided by SDK can not be localized (yet). * Use online command StateText to translate ON, OFF, HOLD and TOGGLE. * Use online command Prefix to translate cmnd, stat and tele. * * Updated until v8.0.0 \*********************************************************************/ //#define LANGUAGE_MODULE_NAME // Enable to display "Module Generic" (ie Spanish), Disable to display "Generic Module" (ie English) #define LANGUAGE_LCID 1043 // HTML (ISO 639-1) Language Code #define D_HTML_LANGUAGE "nl" // "2017-03-07T11:08:02" - ISO8601:2004 #define D_YEAR_MONTH_SEPARATOR "-" #define D_MONTH_DAY_SEPARATOR "-" #define D_DATE_TIME_SEPARATOR "T" #define D_HOUR_MINUTE_SEPARATOR ":" #define D_MINUTE_SECOND_SEPARATOR ":" #define D_DAY3LIST "Zo Ma Di Wo Do Vr Za " #define D_MONTH3LIST "JanFebMarAprMeiJunJulAugSepOktNovDec" // Non JSON decimal separator #define D_DECIMAL_SEPARATOR "," // Common #define D_ADMIN "Admin" #define D_AIR_QUALITY "Lucht kwaliteit" #define D_AP "AP" // Access Point #define D_AS "als" #define D_AUTO "AUTO" #define D_BLINK "Knipper" #define D_BLINKOFF "KnipperUit" #define D_BOOT_COUNT "Herstarts" #define D_BRIGHTLIGHT "Fel" #define D_BSSID "BSSId" #define D_BUTTON "DrukKnop" #define D_BY "door" // Written by me #define D_BYTES "Bytes" #define D_CELSIUS "Celsius" #define D_CHANNEL "Kanaal" #define D_CO2 "Koolstofdioxide" #define D_CODE "code" // Button code #define D_COLDLIGHT "Koud" #define D_COMMAND "Opdracht" #define D_CONNECTED "Verbonden" #define D_COUNT "Aantal" #define D_CORS_DOMAIN "CORS Domain" #define D_COUNTER "Teller" #define D_CT_POWER "CT Power" #define D_CURRENT "Stroom" // As in Voltage and Current #define D_DATA "Data" #define D_DARKLIGHT "Donker" #define D_DEBUG "Debug" #define D_DEWPOINT "Dauwpunt" #define D_DISABLED "Uitgeschakeld" #define D_DISTANCE "Afstand" #define D_DNS_SERVER "DNS Server" #define D_DONE "Klaar" #define D_DST_TIME "ZT" #define D_ECO2 "eCO₂" #define D_EMULATION "Emulatie" #define D_ENABLED "Geactiveerd" #define D_ERASE "Wissen" #define D_ERROR "Fout" #define D_FAHRENHEIT "Fahrenheit" #define D_FAILED "Mislukt" #define D_FALLBACK "Fallback" #define D_FALLBACK_TOPIC "Fallback Topic" #define D_FALSE "Onwaar" #define D_FILE "Bestand" #define D_FLOW_RATE "Debiet" #define D_FREE_MEMORY "Vrij geheugen" #define D_FREQUENCY "Frequentie" #define D_GAS "Gas" #define D_GATEWAY "Gateway" #define D_GROUP "Groep" #define D_HOST "Host" #define D_HOSTNAME "Hostnaam" #define D_HUMIDITY "Luchtvochtigheid" #define D_ILLUMINANCE "Verlichtingssterkte" #define D_IMMEDIATE "onmiddelijk" // Button immediate #define D_INDEX "Index" #define D_INFO "Info" #define D_INFRARED "Infrarood" #define D_INITIALIZED "Geinitialiseerd" #define D_IP_ADDRESS "IP Adres" #define D_LIGHT "Licht" #define D_LWT "LWT" #define D_MODULE "Module" #define D_MOISTURE "Moisture" #define D_MQTT "MQTT" #define D_MULTI_PRESS "meervoudig" #define D_NOISE "Lawaai" #define D_NONE "Geen" #define D_OFF "Uit" #define D_OFFLINE "Offline" #define D_OK "Ok" #define D_ON "Aan" #define D_ONLINE "Online" #define D_PASSWORD "Wachtwoord" #define D_PORT "Poort" #define D_POWER_FACTOR "Arbeidsfactor" #define D_POWERUSAGE "Vermogen" #define D_POWERUSAGE_ACTIVE "Werkelijk vermogen" #define D_POWERUSAGE_APPARENT "Schijnbaar vermogen" #define D_POWERUSAGE_REACTIVE "Blindvermogen" #define D_PRESSURE "Luchtdruk" #define D_PRESSUREATSEALEVEL "ZeeLuchtdruk" #define D_PROGRAM_FLASH_SIZE "Programma Flash Grootte" #define D_PROGRAM_SIZE "Programma Grootte" #define D_PROJECT "Project" #define D_RAIN "Regen" #define D_RANGE "Range" #define D_RECEIVED "Ontvangen" #define D_RESTART "Herstart" #define D_RESTARTING "Herstarten" #define D_RESTART_REASON "Reden herstart" #define D_RESTORE "herstellen" #define D_RETAINED "retained" #define D_RULE "Regel" #define D_SAVE "Opslaan" #define D_SENSOR "Sensor" #define D_SSID "SSId" #define D_START "Start" #define D_STD_TIME "WT" #define D_STOP "Stop" #define D_SUBNET_MASK "Subnet Masker" #define D_SUBSCRIBE_TO "Abonneer op" #define D_UNSUBSCRIBE_FROM "Uitschrijven van" #define D_SUCCESSFUL "Gelukt" #define D_SUNRISE "Zonsopgang" #define D_SUNSET "Zonsondergang" #define D_TEMPERATURE "Temperatuur" #define D_TO "naar" #define D_TOGGLE "Toggle" // Wissel, Tuimel #define D_TOPIC "Topic" // Onderwerp #define D_TOTAL_USAGE "Totaal verbruik" #define D_TRANSMIT "Verzend" #define D_TRUE "Waar" #define D_TVOC "TVOC" #define D_UPGRADE "opwaarderen" #define D_UPLOAD "Verzenden" #define D_UPTIME "Bedrijfstijd" #define D_USER "Gebruiker" #define D_UTC_TIME "UTC" #define D_UV_INDEX "UV-index" #define D_UV_INDEX_1 "Laag" #define D_UV_INDEX_2 "Gemiddeld" #define D_UV_INDEX_3 "Hoog" #define D_UV_INDEX_4 "Intens" #define D_UV_INDEX_5 "Gevaarlijk" #define D_UV_INDEX_6 "Schadelijk" #define D_UV_INDEX_7 "Uitzonderlijk" #define D_UV_LEVEL "UV niveau" #define D_UV_POWER "UV intensiteit" #define D_VERSION "Versie" #define D_VOLTAGE "Spanning" #define D_WEIGHT "Gewicht" #define D_WARMLIGHT "Warm" #define D_WEB_SERVER "Webserver" // tasmota.ino #define D_WARNING_MINIMAL_VERSION "WAARSCHUWING Deze versie bewaart geen instellingen" #define D_LEVEL_10 "niveau 1-0" #define D_LEVEL_01 "niveau 0-1" #define D_SERIAL_LOGGING_DISABLED "Serieel logging uitgeschakeld" #define D_SYSLOG_LOGGING_REENABLED "Syslog logging weer ingeschakeld" #define D_SET_BAUDRATE_TO "Zet baudrate op" #define D_RECEIVED_TOPIC "Ontvangen topic" #define D_DATA_SIZE "Data lengte" #define D_ANALOG_INPUT "Analoog" // support.ino #define D_OSWATCH "osWatch" #define D_BLOCKED_LOOP "Blocked Loop" #define D_WPS_FAILED_WITH_STATUS "WPSconfig mislukt met status" #define D_ACTIVE_FOR_3_MINUTES "3 minuten actief" #define D_FAILED_TO_START "mislukt" #define D_PATCH_ISSUE_2186 "Patch issue 2186" #define D_CONNECTING_TO_AP "Verbinden met AP" #define D_IN_MODE "in stand" #define D_CONNECT_FAILED_NO_IP_ADDRESS "Verbinding mislukt omdat geen IP adres werd ontvangen" #define D_CONNECT_FAILED_AP_NOT_REACHED "Verbinding mislukt omdat AP onbereikbaar is" #define D_CONNECT_FAILED_WRONG_PASSWORD "Verbinding mislukt" #define D_CONNECT_FAILED_AP_TIMEOUT "Verbinding mislukt door AP time-out" #define D_ATTEMPTING_CONNECTION "Verbinden..." #define D_CHECKING_CONNECTION "Controleer verbinding..." #define D_QUERY_DONE "Aanvraag klaar. Aantal MQTT diensten gevonden" #define D_MQTT_SERVICE_FOUND "MQTT dienst gevonden op" #define D_FOUND_AT "gevonden op" #define D_SYSLOG_HOST_NOT_FOUND "Syslog Host niet gevonden" // settings.ino #define D_SAVED_TO_FLASH_AT "Opgeslagen in flash op" #define D_LOADED_FROM_FLASH_AT "Geladen vanuit flash op" #define D_USE_DEFAULTS "Gebruik standaardwaarden" #define D_ERASED_SECTOR "Wis sector" // xdrv_02_webserver.ino #define D_NOSCRIPT "Zet JavaScript aan voor Tasmota" #define D_MINIMAL_FIRMWARE_PLEASE_UPGRADE "MINIMAL firmware
opwaarderen" #define D_WEBSERVER_ACTIVE_ON "Webserver actief op" #define D_WITH_IP_ADDRESS "met IP adres" #define D_WEBSERVER_STOPPED "Webserver gestopt" #define D_FILE_NOT_FOUND "Bestand niet gevonden" #define D_REDIRECTED "Omleiding naar captive portal" #define D_WIFIMANAGER_SET_ACCESSPOINT_AND_STATION "Wifimanager start AccessPoint en hou Station" #define D_WIFIMANAGER_SET_ACCESSPOINT "Wifimanager start AccessPoint" #define D_TRYING_TO_CONNECT "Apparaat probeert te verbinden met netwerk" #define D_RESTART_IN "Herstart over" #define D_SECONDS "seconden" #define D_DEVICE_WILL_RESTART "Herstart over enkele seconden" #define D_BUTTON_TOGGLE "Toggle" // Wissel, Tuimel #define D_CONFIGURATION "Configuratie" #define D_INFORMATION "Informatie" #define D_FIRMWARE_UPGRADE "Opwaarderen" #define D_CONSOLE "Console" #define D_CONFIRM_RESTART "Bevestig herstart" #define D_CONFIGURE_MODULE "Configureer Module" #define D_CONFIGURE_WIFI "Configureer WiFi" #define D_CONFIGURE_MQTT "Configureer MQTT" #define D_CONFIGURE_DOMOTICZ "Configureer Domoticz" #define D_CONFIGURE_LOGGING "Configureer Logging" #define D_CONFIGURE_OTHER "Configureer Overige" #define D_CONFIRM_RESET_CONFIGURATION "Bevestig reset configuratie" #define D_RESET_CONFIGURATION "Reset Configuratie" #define D_BACKUP_CONFIGURATION "Bewaar Configuratie" #define D_RESTORE_CONFIGURATION "Herstel Configuration" #define D_MAIN_MENU "Hoofdmenu" #define D_MODULE_PARAMETERS "Module parameters" #define D_MODULE_TYPE "Module soort" #define D_PULLUP_ENABLE "Geen schakelaar pull-up" #define D_ADC "ADC" #define D_GPIO "GPIO" #define D_SERIAL_IN "Serieel In" #define D_SERIAL_OUT "Serieel Uit" #define D_WIFI_PARAMETERS "Wifi parameters" #define D_SCAN_FOR_WIFI_NETWORKS "Zoek wifi netwerken" #define D_SCAN_DONE "Scan klaar" #define D_NO_NETWORKS_FOUND "Geen netwerken gevonden" #define D_REFRESH_TO_SCAN_AGAIN "Vernieuw om opnieuw te zoeken" #define D_DUPLICATE_ACCESSPOINT "Dubbel AccessPoint" #define D_SKIPPING_LOW_QUALITY "Overslaan agv lage ontvangskwaliteit" #define D_RSSI "RSSI" #define D_WEP "WEP" #define D_WPA_PSK "WPA PSK" #define D_WPA2_PSK "WPA2 PSK" #define D_AP1_SSID "AP1 SSId" #define D_AP1_PASSWORD "AP1 Wachtwoord" #define D_AP2_SSID "AP2 SSId" #define D_AP2_PASSWORD "AP2 Wachtwoord" #define D_MQTT_PARAMETERS "MQTT parameters" #define D_CLIENT "Client" #define D_FULL_TOPIC "Volledig Topic" #define D_LOGGING_PARAMETERS "Logging parameters" #define D_SERIAL_LOG_LEVEL "Serieel log niveau" #define D_MQTT_LOG_LEVEL "Mqtt log niveau" #define D_WEB_LOG_LEVEL "Web log niveau" #define D_SYS_LOG_LEVEL "Syslog niveau" #define D_MORE_DEBUG "Meer debug" #define D_SYSLOG_HOST "Syslog host" #define D_SYSLOG_PORT "Syslog poort" #define D_TELEMETRY_PERIOD "Telemetry periode" #define D_OTHER_PARAMETERS "Overige parameters" #define D_TEMPLATE "Sjabloon" #define D_ACTIVATE "Activeer" #define D_WEB_ADMIN_PASSWORD "Web Admin Wachtwoord" #define D_MQTT_ENABLE "MQTT ingeschakeld" #define D_FRIENDLY_NAME "Beschrijvende naam" #define D_BELKIN_WEMO "Belkin WeMo" #define D_HUE_BRIDGE "Hue Bridge" #define D_SINGLE_DEVICE "een apparaat" #define D_MULTI_DEVICE "meer apparaten" #define D_CONFIGURE_TEMPLATE "Configureer Sjabloon" #define D_TEMPLATE_PARAMETERS "Sjabloon parameters" #define D_TEMPLATE_NAME "Naam" #define D_BASE_TYPE "Op basis van" #define D_TEMPLATE_FLAGS "Opties" #define D_SAVE_CONFIGURATION "Bewaar configuratie" #define D_CONFIGURATION_SAVED "Configuratie opgeslagen" #define D_CONFIGURATION_RESET "Configuratie ge-reset" #define D_PROGRAM_VERSION "Programma Versie" #define D_BUILD_DATE_AND_TIME "Compileer Datum & Tijd" #define D_CORE_AND_SDK_VERSION "Core/SDK Versie" #define D_FLASH_WRITE_COUNT "Aantal Flash opslagen" #define D_MAC_ADDRESS "MAC Adres" #define D_MQTT_HOST "MQTT Host" #define D_MQTT_PORT "MQTT Poort" #define D_MQTT_CLIENT "MQTT Client" #define D_MQTT_USER "MQTT Gebruiker" #define D_MQTT_TOPIC "MQTT Topic" #define D_MQTT_GROUP_TOPIC "MQTT Groep Topic" #define D_MQTT_FULL_TOPIC "MQTT Volledig Topic" #define D_MDNS_DISCOVERY "mDNS Discovery" #define D_MDNS_ADVERTISE "mDNS Advertise" #define D_ESP_CHIP_ID "ESP Chip Id" #define D_FLASH_CHIP_ID "Flash Chip Id" #define D_FLASH_CHIP_SIZE "Flash Grootte" #define D_FREE_PROGRAM_SPACE "Programma ruimte over" #define D_UPGRADE_BY_WEBSERVER "Opwaarderen dmv webserver" #define D_OTA_URL "OTA Url" #define D_START_UPGRADE "Start opwaarderen" #define D_UPGRADE_BY_FILE_UPLOAD "Opwaarderen dmv verzenden bestand" #define D_UPLOAD_STARTED "Verzending gestart" #define D_UPGRADE_STARTED "Opwaarderen gestart" #define D_UPLOAD_DONE "Opwaarderen klaar" #define D_UPLOAD_ERR_1 "Geen bestand gekozen" #define D_UPLOAD_ERR_2 "Onvoldoende geheugen ruimte" #define D_UPLOAD_ERR_3 "Magische byte is niet 0xE9" #define D_UPLOAD_ERR_4 "Programma flash grootte is groter dan werkelijke flash grootte" #define D_UPLOAD_ERR_5 "Opwaardeer buffer verschil" #define D_UPLOAD_ERR_6 "Opwaarderen mislukt. Schakel logging 3 in" #define D_UPLOAD_ERR_7 "Opwaarderen afgebroken" #define D_UPLOAD_ERR_8 "Ongeldig bestand" #define D_UPLOAD_ERR_9 "Bestand is te groot" #define D_UPLOAD_ERR_10 "Init RF chip mislukt" #define D_UPLOAD_ERR_11 "Wissen RF chip mislukt" #define D_UPLOAD_ERR_12 "Opwaarderen RF chip mislukt" #define D_UPLOAD_ERR_13 "Decoderen RF bestand mislukt" #define D_UPLOAD_ERR_14 "Niet geschikt" #define D_UPLOAD_ERROR_CODE "Opwaardeer foutcode" #define D_ENTER_COMMAND "Geef opdracht" #define D_ENABLE_WEBLOG_FOR_RESPONSE "Schakel weblog 2 in indien antwoord verwacht" #define D_NEED_USER_AND_PASSWORD "Benodig user=&password=" // xdrv_01_mqtt.ino #define D_FINGERPRINT "Controleer TLS vingerafdruk..." #define D_TLS_CONNECT_FAILED_TO "TLS Verbinding mislukt naar" #define D_RETRY_IN "Opnieuw proberen over" #define D_VERIFIED "Gecontroleerd met vingerafdruk" #define D_INSECURE "Door ongeldige vingerafdruk een onveilige verbinding" #define D_CONNECT_FAILED_TO "Verbinding mislukt naar" // xplg_wemohue.ino #define D_MULTICAST_DISABLED "Multicast uitgeschakeld" #define D_MULTICAST_REJOINED "Multicast verbonden" #define D_MULTICAST_JOIN_FAILED "Multicast verbinding mislukt" #define D_FAILED_TO_SEND_RESPONSE "Antwoord versturen mislukt" #define D_WEMO "WeMo" #define D_WEMO_BASIC_EVENT "WeMo basis gebeurtenis" #define D_WEMO_EVENT_SERVICE "WeMo gebeurtenis dienst" #define D_WEMO_META_SERVICE "WeMo meta service" #define D_WEMO_SETUP "WeMo installatie" #define D_RESPONSE_SENT "Antwoord verstuurd" #define D_HUE "Hue" #define D_HUE_BRIDGE_SETUP "Hue installatie" #define D_HUE_API_NOT_IMPLEMENTED "Hue API niet beschikbaar" #define D_HUE_API "Hue API" #define D_HUE_POST_ARGS "Hue POST argumenten" #define D_3_RESPONSE_PACKETS_SENT "3 antwoord paketten verstuurd" // xdrv_07_domoticz.ino #define D_DOMOTICZ_PARAMETERS "Domoticz parameters" #define D_DOMOTICZ_IDX "Idx" #define D_DOMOTICZ_KEY_IDX "Toets idx" #define D_DOMOTICZ_SWITCH_IDX "Schakelaar idx" #define D_DOMOTICZ_SENSOR_IDX "Sensor idx" #define D_DOMOTICZ_TEMP "Temp" #define D_DOMOTICZ_TEMP_HUM "Temp,Hum" #define D_DOMOTICZ_TEMP_HUM_BARO "Temp,Hum,Baro" #define D_DOMOTICZ_POWER_ENERGY "Power,Energy" #define D_DOMOTICZ_ILLUMINANCE "Illuminance" #define D_DOMOTICZ_COUNT "Count/PM1" #define D_DOMOTICZ_VOLTAGE "Spanning/PM2,5" #define D_DOMOTICZ_CURRENT "Stroom/PM10" #define D_DOMOTICZ_AIRQUALITY "AirQuality" #define D_DOMOTICZ_P1_SMART_METER "P1SmartMeter" #define D_DOMOTICZ_UPDATE_TIMER "Bijwerk timer" // xdrv_09_timers.ino #define D_CONFIGURE_TIMER "Configureer Tijdschakelaar" #define D_TIMER_PARAMETERS "Tijdschakelaar parameters" #define D_TIMER_ENABLE "Tijdschakelaars inschakelen" #define D_TIMER_ARM "Actief" #define D_TIMER_TIME "Tijd" #define D_TIMER_DAYS "Dagen" #define D_TIMER_REPEAT "Herhaal" #define D_TIMER_OUTPUT "Uitgang" #define D_TIMER_ACTION "Actie" // xdrv_10_knx.ino #define D_CONFIGURE_KNX "Configureer KNX" #define D_KNX_PARAMETERS "KNX Parameters" #define D_KNX_GENERAL_CONFIG "Algemeen" #define D_KNX_PHYSICAL_ADDRESS "Eigen adres" #define D_KNX_PHYSICAL_ADDRESS_NOTE "(Moet uniek zijn op het KNX netwerk)" #define D_KNX_ENABLE "KNX inschakelen" #define D_KNX_GROUP_ADDRESS_TO_WRITE "Stuur gegevens naar groep adressen" #define D_ADD "Toevoegen" #define D_DELETE "Verwijder" #define D_REPLY "Antwoord" #define D_KNX_GROUP_ADDRESS_TO_READ "Ontvang gegevens van groep adressen" #define D_RECEIVED_FROM "Ontvangen van" #define D_KNX_COMMAND_WRITE "Schrijven" #define D_KNX_COMMAND_READ "Lezen" #define D_KNX_COMMAND_OTHER "Overige" #define D_SENT_TO "verzend naar" #define D_KNX_WARNING "Groep adres (0/0/0) is gereserveerd en mag niet worden gebruikt." #define D_KNX_ENHANCEMENT "Verbeter verbinding" #define D_KNX_TX_SLOT "KNX TX" #define D_KNX_RX_SLOT "KNX RX" // xdrv_03_energy.ino #define D_ENERGY_TODAY "Verbruik vandaag" #define D_ENERGY_YESTERDAY "Verbruik gisteren" #define D_ENERGY_TOTAL "Verbruik totaal" // xdrv_27_shutter.ino #define D_OPEN "Openen" #define D_CLOSE "Sluiten" #define D_DOMOTICZ_SHUTTER "Rolluik" // xdrv_28_pcf8574.ino #define D_CONFIGURE_PCF8574 "Configureer PCF8574" #define D_PCF8574_PARAMETERS "PCF8574 Parameters" #define D_INVERT_PORTS "Inverteer Poorten" #define D_DEVICE "Apparaat" #define D_DEVICE_INPUT "Ingang" #define D_DEVICE_OUTPUT "Uitgang" // xsns_05_ds18b20.ino #define D_SENSOR_BUSY "Sensor bezet" #define D_SENSOR_CRC_ERROR "Sensor CRC fout" #define D_SENSORS_FOUND "Aantal sensoren" // xsns_06_dht.ino #define D_TIMEOUT_WAITING_FOR "Te lang wachten op" #define D_START_SIGNAL_LOW "laag start signaal" #define D_START_SIGNAL_HIGH "hoog start signaal" #define D_PULSE "signaal" #define D_CHECKSUM_FAILURE "Controle mislukt" // xsns_07_sht1x.ino #define D_SENSOR_DID_NOT_ACK_COMMAND "Geen opdracht ACK van sensor" #define D_SHT1X_FOUND "SHT1X gevonden" // xsns_18_pms5003.ino #define D_STANDARD_CONCENTRATION "CF-1 PM" // Standard Particle CF-1 Particle Matter #define D_ENVIRONMENTAL_CONCENTRATION "PM" // Environmetal Particle Matter #define D_PARTICALS_BEYOND "Stofdeeltjes" // xsns_32_mpu6050.ino #define D_AX_AXIS "Versn. X-as" #define D_AY_AXIS "Versn. Y-as" #define D_AZ_AXIS "Versn. Z-as" #define D_GX_AXIS "Gyro X-as" #define D_GY_AXIS "Gyro Y-as" #define D_GZ_AXIS "Gyro Z-as" // xsns_34_hx711.ino #define D_HX_CAL_REMOVE "Verwijder gewicht" #define D_HX_CAL_REFERENCE "Plaats ijkgewicht" #define D_HX_CAL_DONE "Ge-ijkt" #define D_HX_CAL_FAIL "Ijken is mislukt" #define D_RESET_HX711 "Nulstelling weegschaal" #define D_CONFIGURE_HX711 "Configureer Weegschaal" #define D_HX711_PARAMETERS "Weegschaal parameters" #define D_ITEM_WEIGHT "Gewicht van onderdeel" #define D_REFERENCE_WEIGHT "Ijkgewicht" #define D_CALIBRATE "Ijken" #define D_CALIBRATION "Ijken" //xsns_35_tx20.ino #define D_TX20_WIND_DIRECTION "Windrichting" #define D_TX20_WIND_SPEED "Windsnelheid" #define D_TX20_WIND_SPEED_MIN "Windsnelhied minimum" #define D_TX20_WIND_SPEED_MAX "Windsnelhied maximaal" #define D_TX20_NORTH "N" #define D_TX20_EAST "E" #define D_TX20_SOUTH "S" #define D_TX20_WEST "W" // xsns_53_sml.ino #define D_TPWRIN "Energy Total-In" #define D_TPWROUT "Energy Total-Out" #define D_TPWRCURR "Active Power-In/Out" #define D_TPWRCURR1 "Active Power-In p1" #define D_TPWRCURR2 "Active Power-In p2" #define D_TPWRCURR3 "Active Power-In p3" #define D_Strom_L1 "Current L1" #define D_Strom_L2 "Current L2" #define D_Strom_L3 "Current L3" #define D_Spannung_L1 "Voltage L1" #define D_Spannung_L2 "Voltage L2" #define D_Spannung_L3 "Voltage L3" #define D_METERNR "Meter_number" #define D_METERSID "Service ID" #define D_GasIN "Counter" #define D_H2oIN "Counter" #define D_StL1L2L3 "Current L1+L2+L3" #define D_SpL1L2L3 "Voltage L1+L2+L3/3" // tasmota_template.h - keep them as short as possible to be able to fit them in GUI drop down box #define D_SENSOR_NONE "Geen" #define D_SENSOR_USER "Gebruiker" #define D_SENSOR_DHT11 "DHT11" #define D_SENSOR_AM2301 "AM2301" #define D_SENSOR_SI7021 "SI7021" #define D_SENSOR_DS18X20 "DS18x20" #define D_SENSOR_I2C_SCL "I2C SCL" #define D_SENSOR_I2C_SDA "I2C SDA" #define D_SENSOR_WS2812 "WS2812" #define D_SENSOR_DFR562 "MP3 Speler" #define D_SENSOR_IRSEND "IRsend" #define D_SENSOR_SWITCH "Switch" // Suffix "1" #define D_SENSOR_BUTTON "Button" // Suffix "1" #define D_SENSOR_RELAY "Relais" // Suffix "1i" #define D_SENSOR_LED "Led" // Suffix "1i" #define D_SENSOR_LED_LINK "LedLink" // Suffix "i" #define D_SENSOR_PWM "PWM" // Suffix "1" #define D_SENSOR_COUNTER "Teller" // Suffix "1" #define D_SENSOR_IRRECV "IRrecv" #define D_SENSOR_MHZ_RX "MHZ Rx" #define D_SENSOR_MHZ_TX "MHZ Tx" #define D_SENSOR_PZEM004_RX "PZEM004 Rx" #define D_SENSOR_PZEM016_RX "PZEM016 Rx" #define D_SENSOR_PZEM017_RX "PZEM017 Rx" #define D_SENSOR_PZEM0XX_TX "PZEM0XX Tx" #define D_SENSOR_SAIR_RX "SAir Rx" #define D_SENSOR_SAIR_TX "SAir Tx" #define D_SENSOR_SPI_CS "SPI CS" #define D_SENSOR_SPI_DC "SPI DC" #define D_SENSOR_SPI_MISO "SPI MISO" #define D_SENSOR_SPI_MOSI "SPI MOSI" #define D_SENSOR_SPI_CLK "SPI CLK" #define D_SENSOR_BACKLIGHT "Backlight" #define D_SENSOR_PMS5003_TX "PMS5003 Tx" #define D_SENSOR_PMS5003_RX "PMS5003 Rx" #define D_SENSOR_SDS0X1_RX "SDS0X1 Rx" #define D_SENSOR_SDS0X1_TX "SDS0X1 Tx" #define D_SENSOR_HPMA_RX "HPMA Rx" #define D_SENSOR_HPMA_TX "HPMA Tx" #define D_SENSOR_SBR_RX "SerBr Rx" #define D_SENSOR_SBR_TX "SerBr Tx" #define D_SENSOR_SR04_TRIG "SR04 Tri/TX" #define D_SENSOR_SR04_ECHO "SR04 Ech/RX" #define D_SENSOR_SDM120_TX "SDMx20 Tx" #define D_SENSOR_SDM120_RX "SDMx20 Rx" #define D_SENSOR_SDM630_TX "SDM630 Tx" #define D_SENSOR_SDM630_RX "SDM630 Rx" #define D_SENSOR_TM1638_CLK "TM16 CLK" #define D_SENSOR_TM1638_DIO "TM16 DIO" #define D_SENSOR_TM1638_STB "TM16 STB" #define D_SENSOR_HX711_SCK "HX711 SCK" #define D_SENSOR_HX711_DAT "HX711 DAT" #define D_SENSOR_TX2X_TX "TX2x" #define D_SENSOR_RFSEND "RFSend" #define D_SENSOR_RFRECV "RFrecv" #define D_SENSOR_TUYA_TX "Tuya Tx" #define D_SENSOR_TUYA_RX "Tuya Rx" #define D_SENSOR_MGC3130_XFER "MGC3130 Xfr" #define D_SENSOR_MGC3130_RESET "MGC3130 Rst" #define D_SENSOR_SSPI_MISO "SSPI MISO" #define D_SENSOR_SSPI_MOSI "SSPI MOSI" #define D_SENSOR_SSPI_SCLK "SSPI SCLK" #define D_SENSOR_SSPI_CS "SSPI CS" #define D_SENSOR_SSPI_DC "SSPI DC" #define D_SENSOR_RF_SENSOR "RF Sensor" #define D_SENSOR_AZ_RX "AZ Rx" #define D_SENSOR_AZ_TX "AZ Tx" #define D_SENSOR_MAX31855_CS "MX31855 CS" #define D_SENSOR_MAX31855_CLK "MX31855 CLK" #define D_SENSOR_MAX31855_DO "MX31855 DO" #define D_SENSOR_NRG_SEL "HLWBL SEL" // Suffix "i" #define D_SENSOR_NRG_CF1 "HLWBL CF1" #define D_SENSOR_HLW_CF "HLW8012 CF" #define D_SENSOR_HJL_CF "BL0937 CF" #define D_SENSOR_MCP39F5_TX "MCP39F5 Tx" #define D_SENSOR_MCP39F5_RX "MCP39F5 Rx" #define D_SENSOR_MCP39F5_RST "MCP39F5 Rst" #define D_SENSOR_CSE7766_TX "CSE7766 Tx" #define D_SENSOR_CSE7766_RX "CSE7766 Rx" #define D_SENSOR_PN532_TX "PN532 Tx" #define D_SENSOR_PN532_RX "PN532 Rx" #define D_SENSOR_SM16716_CLK "SM16716 CLK" #define D_SENSOR_SM16716_DAT "SM16716 DAT" #define D_SENSOR_SM16716_POWER "SM16716 PWR" #define D_SENSOR_MY92X1_DI "MY92x1 DI" #define D_SENSOR_MY92X1_DCKI "MY92x1 DCKI" #define D_SENSOR_ARIRFRCV "ALux IrRcv" #define D_SENSOR_ARIRFSEL "ALux IrSel" #define D_SENSOR_TXD "Serial Tx" #define D_SENSOR_RXD "Serial Rx" #define D_SENSOR_ROTARY "Rotary" // Suffix "1A" #define D_SENSOR_HRE_CLOCK "HRE Clock" #define D_SENSOR_HRE_DATA "HRE Data" #define D_SENSOR_ADE7953_IRQ "ADE7953 IRQ" #define D_SENSOR_BUZZER "Zoemer" #define D_SENSOR_OLED_RESET "OLED Reset" #define D_SENSOR_ZIGBEE_TXD "Zigbee Tx" #define D_SENSOR_ZIGBEE_RXD "Zigbee Rx" #define D_SENSOR_SOLAXX1_TX "SolaxX1 Tx" #define D_SENSOR_SOLAXX1_RX "SolaxX1 Rx" #define D_SENSOR_IBEACON_TX "iBeacon TX" #define D_SENSOR_IBEACON_RX "iBeacon RX" #define D_SENSOR_RDM6300_RX "RDM6300 RX" #define D_SENSOR_CC1101_CS "CC1101 CS" #define D_SENSOR_A4988_DIR "A4988 DIR" #define D_SENSOR_A4988_STP "A4988 STP" #define D_SENSOR_A4988_ENA "A4988 ENA" #define D_SENSOR_A4988_MS1 "A4988 MS1" #define D_SENSOR_A4988_MS2 "A4988 MS2" #define D_SENSOR_A4988_MS3 "A4988 MS3" #define D_SENSOR_DDS2382_TX "DDS238-2 Tx" #define D_SENSOR_DDS2382_RX "DDS238-2 Rx" #define D_SENSOR_DDSU666_TX "DDSU666 Tx" #define D_SENSOR_DDSU666_RX "DDSU666 Rx" #define D_SENSOR_SM2135_CLK "SM2135 Clk" #define D_SENSOR_SM2135_DAT "SM2135 Dat" #define D_SENSOR_DEEPSLEEP "DeepSleep" #define D_SENSOR_EXS_ENABLE "EXS Enable" #define D_SENSOR_SLAVE_TX "Slave TX" #define D_SENSOR_SLAVE_RX "Slave RX" #define D_SENSOR_SLAVE_RESET "Slave RST" #define D_SENSOR_GPS_RX "GPS RX" #define D_SENSOR_GPS_TX "GPS TX" #define D_SENSOR_HM10_RX "HM10 RX" #define D_SENSOR_HM10_TX "HM10 TX" #define D_SENSOR_LE01MR_RX "LE-01MR Rx" #define D_SENSOR_LE01MR_TX "LE-01MR Tx" #define D_SENSOR_CC1101_GDO0 "CC1101 GDO0" #define D_SENSOR_CC1101_GDO2 "CC1101 GDO2" #define D_SENSOR_HRXL_RX "HRXL Rx" #define D_SENSOR_ELECTRIQ_MOODL "MOODL Tx" #define D_SENSOR_AS3935 "AS3935" #define D_GPIO_WEBCAM_PWDN_GPIO_NUM "CAM_PWDN" #define D_GPIO_WEBCAM_RESET_GPIO_NUM "CAM_RESET" #define D_GPIO_WEBCAM_XCLK_GPIO_NUM "CAM_XCLK" #define D_GPIO_WEBCAM_SIOD_GPIO_NUM "CAM_SIOD" #define D_GPIO_WEBCAM_SIOC_GPIO_NUM "CAM_SIOC" #define D_GPIO_WEBCAM_Y9_GPIO_NUM "CAM_Y9" #define D_GPIO_WEBCAM_Y8_GPIO_NUM "CAM_Y8" #define D_GPIO_WEBCAM_Y7_GPIO_NUM "CAM_Y7" #define D_GPIO_WEBCAM_Y6_GPIO_NUM "CAM_Y6" #define D_GPIO_WEBCAM_Y5_GPIO_NUM "CAM_Y5" #define D_GPIO_WEBCAM_Y4_GPIO_NUM "CAM_Y4" #define D_GPIO_WEBCAM_Y3_GPIO_NUM "CAM_Y3" #define D_GPIO_WEBCAM_Y2_GPIO_NUM "CAM_Y2" #define D_GPIO_WEBCAM_VSYNC_GPIO_NUM "CAM_VSYNC" #define D_GPIO_WEBCAM_HREF_GPIO_NUM "CAM_HREF" #define D_GPIO_WEBCAM_PCLK_GPIO_NUM "CAM_PCLK" #define D_GPIO_WEBCAM_PSCLK_GPIO_NUM "CAM_PSCLK" #define D_GPIO_WEBCAM_HSD1_GPIO_NUM "CAM_HSD1" #define D_GPIO_WEBCAM_HSD2_GPIO_NUM "CAM_HSD2" #define D_GPIO_WEBCAM_HSD3_GPIO_NUM "CAM_HSD3" #define D_GPIO_WEBCAM_PSRCS_GPIO_NUM "CAM_PSRCS" // Units #define D_UNIT_AMPERE "A" #define D_UNIT_CENTIMETER "cm" #define D_UNIT_HERTZ "Hz" #define D_UNIT_HOUR "h" #define D_UNIT_GALLONS "gal" #define D_UNIT_GALLONS_PER_MIN "g/m" #define D_UNIT_INCREMENTS "inc" #define D_UNIT_KILOMETER "km" #define D_UNIT_KILOGRAM "kg" #define D_UNIT_KILOMETER_PER_HOUR "km/h" // or "km/h" #define D_UNIT_KILOOHM "kΩ" #define D_UNIT_KILOWATTHOUR "kWh" #define D_UNIT_LUX "lx" #define D_UNIT_MICROGRAM_PER_CUBIC_METER "µg/m³" #define D_UNIT_MICROMETER "µm" #define D_UNIT_MICROSECOND "µs" #define D_UNIT_MILLIAMPERE "mA" #define D_UNIT_MILLIMETER "mm" #define D_UNIT_MILLIMETER_MERCURY "mmHg" #define D_UNIT_MILLISECOND "ms" #define D_UNIT_MINUTE "Min" #define D_UNIT_PARTS_PER_BILLION "ppb" #define D_UNIT_PARTS_PER_DECILITER "ppd" #define D_UNIT_PARTS_PER_MILLION "ppm" #define D_UNIT_PRESSURE "hPa" #define D_UNIT_SECOND "sec" #define D_UNIT_SECTORS "sectoren" #define D_UNIT_VA "VA" #define D_UNIT_VAR "VAr" #define D_UNIT_VOLT "V" #define D_UNIT_WATT "W" #define D_UNIT_WATTHOUR "Wh" #define D_UNIT_WATT_METER_QUADRAT "W/m²" //SDM220, SDM120, LE01MR #define D_PHASE_ANGLE "Fase hoek" #define D_IMPORT_ACTIVE "Import werkelijk" #define D_EXPORT_ACTIVE "Export werkelijk" #define D_IMPORT_REACTIVE "Import blind" #define D_EXPORT_REACTIVE "Export blind" #define D_TOTAL_REACTIVE "Totaal blind" #define D_UNIT_KWARH "kVArh" #define D_UNIT_ANGLE "Deg" #define D_TOTAL_ACTIVE "Total Active" //SOLAXX1 #define D_PV1_VOLTAGE "PV1 spanning" #define D_PV1_CURRENT "PV1 stroom" #define D_PV1_POWER "PV1 vermogen" #define D_PV2_VOLTAGE "PV2 spanning" #define D_PV2_CURRENT "PV2 stroom" #define D_PV2_POWER "PV2 vermogen" #define D_SOLAR_POWER "Zon vermogen" #define D_INVERTER_POWER "Omvormer vermogen" #define D_STATUS "Status" #define D_WAITING "Wacht" #define D_CHECKING "Controle" #define D_WORKING "Actief" #define D_FAILURE "Fout" #define D_SOLAX_ERROR_0 "Geen" #define D_SOLAX_ERROR_1 "Netverbinding" #define D_SOLAX_ERROR_2 "Netspanning" #define D_SOLAX_ERROR_3 "Netfrequentie" #define D_SOLAX_ERROR_4 "Pv spanning" #define D_SOLAX_ERROR_5 "Isolatie" #define D_SOLAX_ERROR_6 "Overtemperatuur" #define D_SOLAX_ERROR_7 "Ventilator" #define D_SOLAX_ERROR_8 "Overige" //xdrv_10_scripter.ino #define D_CONFIGURE_SCRIPT "Edit script" #define D_SCRIPT "edit script" #define D_SDCARD_UPLOAD "file upload" #define D_SDCARD_DIR "sd card directory" #define D_UPL_DONE "Done" #define D_SCRIPT_CHARS_LEFT "chars left" #define D_SCRIPT_CHARS_NO_MORE "no more chars" #define D_SCRIPT_DOWNLOAD "Download" #define D_SCRIPT_ENABLE "script enable" #define D_SCRIPT_UPLOAD "Upload" #define D_SCRIPT_UPLOAD_FILES "Upload files" //xsns_67_as3935.ino #define D_AS3935_GAIN "gain:" #define D_AS3935_ENERGY "energy:" #define D_AS3935_DISTANCE "distance:" #define D_AS3935_DISTURBER "disturber:" #define D_AS3935_VRMS "µVrms:" #define D_AS3935_APRX "aprx.:" #define D_AS3935_AWAY "away" #define D_AS3935_LIGHT "lightning" #define D_AS3935_OUT "lightning out of range" #define D_AS3935_NOT "distance not determined" #define D_AS3935_ABOVE "lightning overhead" #define D_AS3935_NOISE "noise detected" #define D_AS3935_DISTDET "disturber detected" #define D_AS3935_INTNOEV "Interrupt with no Event!" #define D_AS3935_NOMESS "listening..." #define D_AS3935_ON "On" #define D_AS3935_OFF "Off" #define D_AS3935_INDOORS "Indoors" #define D_AS3935_OUTDOORS "Outdoors" #define D_AS3935_CAL_FAIL "calibration failed" #define D_AS3935_CAL_OK "calibration set to:" #endif // _LANGUAGE_NL_NL_H_