/* xnrg_15_Teleinfo.ino - Teleinfo support for Tasmota Copyright (C) 2021 Charles-Henri Hallard This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . */ #ifdef USE_ENERGY_SENSOR #ifdef USE_TELEINFO /*********************************************************************************************\ * Teleinfo : French energy provider metering telemety data * Source: http://hallard.me/category/tinfo/ * * Denky ESP32 Teleinfo Template * {"NAME":"Denky (Teleinfo)","GPIO":[1,1,1,1,5664,1,1,1,1,1,1,1,1,1,1,1,0,1,1,1,0,1376,1,1,0,0,0,0,1,5632,1,1,1,0,0,1],"FLAG":0,"BASE":1} * Denky D4 ESP Pico V3 Teleinfo Template * {"NAME":"DenkyD4","GPIO":[32,0,0,0,1,0,0,0,0,1,0,1,0,0,0,0,0,640,608,0,0,450,449,448,0,0,0,0,0,0,0,0,0,0,0,0],"FLAG":0,"BASE":1} * * Denky (aka WifInfo) ESP8266 Teleinfo Template * {"NAME":"WifInfo v1.0a","GPIO":[17,255,255,255,6,5,255,255,7,210,255,255,255],"FLAG":15,"BASE":18} * {"NAME":"WifInfo","GPIO":[7,255,255,210,6,5,255,255,255,255,255,255,255],"FLAG":15,"BASE":18} * \*********************************************************************************************/ #define XNRG_15 15 #include "LibTeleinfo.h" #include #define TINFO_READ_TIMEOUT 400 #define D_NAME_TELEINFO "Teleinfo" // Json Command //const char S_JSON_TELEINFO_COMMAND_STRING[] PROGMEM = "{\"" D_NAME_TELEINFO "\":{\"%s\":%s}}"; //const char S_JSON_TELEINFO_COMMAND_NVALUE[] PROGMEM = "{\"" D_NAME_TELEINFO "\":{\"%s\":%d}}"; const char TELEINFO_COMMAND_SETTINGS[] PROGMEM = "TIC: Settings Mode:%s, RX:%s, EN:%s, Raw:%s, Skip:%d, Limit:%d"; #define MAX_TINFO_COMMAND_NAME 16+1 // Change this if one of the following kTInfo_Commands is higher then 16 char const char kTInfo_Commands[] PROGMEM = "historique|standard|noraw|full|changed|skip|limit"; enum TInfoCommands { // commands for Console CMND_TELEINFO_HISTORIQUE=0, // Set Legacy mode CMND_TELEINFO_STANDARD, // Set Standard Mode CMND_TELEINFO_RAW_DISABLE, // Disable Raw frame sending CMND_TELEINFO_RAW_FULL, // Enable all RAW frame send CMND_TELEINFO_RAW_CHANGE, // Enable only changed values RAW frame send CMND_TELEINFO_SKIP, // Set number of frame to skip when raw mode is enabled CMND_TELEINFO_LIMIT // Limit RAW frame to values subject to fast change (Power, Current, ...), TBD }; // All contract type for legacy, standard mode has in clear text enum TInfoContrat{ CONTRAT_BAS = 1, // BASE => Option Base. CONTRAT_HC, // HC.. => Option Heures Creuses. CONTRAT_EJP, // EJP. => Option EJP. CONTRAT_BBR, // BBRx => Option Tempo CONTRAT_END }; // contract displayed name for legacy, standard mode has in clear text const char kContratName[] PROGMEM = "|Base|Heures Creuses|EJP|Bleu Blanc Rouge" ; // Received current contract value for legacy, standard mode has in clear text const char kContratValue[] PROGMEM = "|BASE|HC..|EJP.|BBR" ; // all tariff type for legacy, standard mode has in clear text enum TInfoTarif{ TARIF_TH = 1, TARIF_HC, TARIF_HP, TARIF_HN, TARIF_PM, TARIF_CB, TARIF_CW, TARIF_CR, TARIF_PB, TARIF_PW, TARIF_PR, TARIF_END }; // Legacy mode Received current tariff values const char kTarifValue[] PROGMEM = "|TH..|HC..|HP.." "|HN..|PM.." "|HCJB|HCJW|HCJR" "|HPJB|HPJW|HPJR" ; // legacy mode tariff displayed name const char kTarifName[] PROGMEM = "|Toutes|Creuses|Pleines" "|Normales|Pointe Mobile" "|Creuses Bleu|Creuses Blanc|Creuse Rouges" "|Pleines Bleu|Pleines Blanc|Pleines Rouges" ; // contract name for standard mode #define TELEINFO_STD_CONTRACT_BASE PSTR("BASE") #define TELEINFO_STD_CONTRACT_HCHP PSTR("H CREUSE/PLEINE") // tariff values for standard mode #define TELEINFO_STD_TARIFF_BASE PSTR("BASE") #define TELEINFO_STD_TARIFF_HC PSTR("HEURE CREUSE") #define TELEINFO_STD_TARIFF_HP PSTR("HEURE PLEINE") // Label used to do some post processing and/or calculation enum TInfoLabel{ LABEL_BASE = 1, LABEL_ADCO, LABEL_ADSC, LABEL_HCHC, LABEL_HCHP, LABEL_EAST, LABEL_EASF01, LABEL_EASF02, LABEL_OPTARIF, LABEL_NGTF, LABEL_ISOUSC, LABEL_PREF, LABEL_PTEC, LABEL_LTARF, LABEL_NTARF, LABEL_PAPP, LABEL_SINSTS, LABEL_IINST, LABEL_IINST1, LABEL_IINST2, LABEL_IINST3, LABEL_IRMS1, LABEL_IRMS2, LABEL_IRMS3, LABEL_TENSION, LABEL_URMS1, LABEL_URMS2, LABEL_URMS3, LABEL_IMAX, LABEL_IMAX1, LABEL_IMAX2, LABEL_IMAX3, LABEL_PMAX, LABEL_SMAXSN, LABEL_DEMAIN, LABEL_END }; const char kLabel[] PROGMEM = "|BASE|ADCO|ADSC" "|HCHC|HCHP|EAST|EASF01|EASF02" "|OPTARIF|NGTF|ISOUSC|PREF|PTEC|LTARF|NTARF" "|PAPP|SINSTS|IINST|IINST1|IINST2|IINST3|IRMS1|IRMS2|IRMS3" "|TENSION|URMS1|URMS2|URMS3" "|IMAX|IMAX1|IMAX2|IMAX3|PMAX|SMAXSN" "|DEMAIN" ; // Blacklisted label from telemetry // Each label shoud be enclosed by pipe const char kLabelBlacklist[] // declared as progmem for ESP8266 just crash and reset on strstr() #ifndef ESP8266 PROGMEM #endif = "|PJOURF+1" "|MSG1" "|" ; #define TELEINFO_SERIAL_BUFFER_STANDARD 512 // Receive buffer size for Standard mode #define TELEINFO_SERIAL_BUFFER_HISTORIQUE 512 // Receive buffer size for Legacy mode #define TELEINFO_PROCESS_BUFFER 32 // Local processing buffer TInfo tinfo; // Teleinfo object TasmotaSerial *TInfoSerial = nullptr; _Mode_e tinfo_mode = TINFO_MODE_HISTORIQUE; uint8_t tic_rx_pin = NOT_A_PIN; char serialNumber[13] = ""; // Serial number is 12 char long bool tinfo_found = false; int serial_buffer_size; int contrat; int tarif; int isousc; int raw_skip; /*********************************************************************************************/ /* ====================================================================== Function: getValueFromLabelIndex Purpose : return label value from label index Input : label index to search for Output : value filled Comments: - ====================================================================== */ char * getValueFromLabelIndex(int labelIndex, char * value) { char labelName[16]; // Get the label name GetTextIndexed(labelName, sizeof(labelName), labelIndex, kLabel); // Get value of label name return tinfo.valueGet(labelName, value) ; } /* ====================================================================== Function: ADPSCallback Purpose : called by library when we detected a ADPS on any phased Input : phase number 0 for ADPS (monophase) 1 for ADIR1 triphase 2 for ADIR2 triphase 3 for ADIR3 triphase label (different on Normal, 3 phases, historique or standard) Output : - Comments: should have been initialised with a tinfo.attachADPSCallback(ADPSCallback()) ====================================================================== */ void ADPSCallback(uint8_t phase, char * label) { // n = phase number 1 to 3 if (phase == 0){ phase = 1; } Response_P(PSTR("{\"TIC\":{\"%s\":%i}}"), label, phase ); // Publish adding ADCO serial number into the topic MqttPublishPrefixTopicRulesProcess_P(TELE, PSTR(D_RSLT_SENSOR), false); AddLog(LOG_LEVEL_INFO, PSTR("ADPS on phase %d"), phase); } /* ====================================================================== Function: DataCallback Purpose : callback when we detected new or modified data received Input : linked list pointer on the concerned data current flags value Output : - Comments: - ====================================================================== */ void DataCallback(struct _ValueList * me, uint8_t flags) { char c = ' '; int ilabel ; char labelName[17]; // Find the label index for ( ilabel = 1 ; ilabel < LABEL_END ; ilabel++) { GetTextIndexed(labelName, sizeof(labelName), ilabel, kLabel); if (!strcmp(labelName, me->name)) { break; } } // We found valid label if (ilabelvalue); AddLog(LOG_LEVEL_DEBUG, PSTR("TIC: Voltage %s=%s, now %d"), me->name, me->value, (int) volt); if ( ilabel == LABEL_URMS2) { Energy.voltage[1] = volt; } else if ( ilabel == LABEL_URMS3) { Energy.voltage[2] = volt; } else { Energy.voltage[0] = volt; } } // Current I phase 1 to 3 else if (ilabel == LABEL_IINST || ilabel == LABEL_IINST1 || ilabel == LABEL_IRMS1 || ilabel == LABEL_IINST2 || ilabel == LABEL_IRMS2 || ilabel == LABEL_IINST3 || ilabel == LABEL_IRMS3 ) { Energy.current_available = true; float current = (float) atoi(me->value); AddLog(LOG_LEVEL_DEBUG, PSTR("TIC: Current %s=%s, now %d"), me->name, me->value, (int) current); if (ilabel == LABEL_IINST2 || ilabel == LABEL_IRMS2) { Energy.current[1] = current; } else if (ilabel == LABEL_IINST3 || ilabel == LABEL_IRMS3) { Energy.phase_count = 3; Energy.current[2] = current; } else { Energy.current[0] = current; } } // Power P else if (ilabel == LABEL_PAPP || ilabel == LABEL_SINSTS) { Energy.active_power[0] = (float) atoi(me->value);; AddLog(LOG_LEVEL_DEBUG, PSTR("TIC: Power %s, now %d"), me->value, (int) Energy.active_power[0]); } // Ok now not so real time values Does this value is new or changed? else if (flags & (TINFO_FLAGS_ADDED | TINFO_FLAGS_UPDATED) ) { if (flags & TINFO_FLAGS_ADDED) { c = '#'; } if (flags & TINFO_FLAGS_UPDATED) { c = '*'; } AddLog(LOG_LEVEL_DEBUG, PSTR("TIC: [%d]%c %s=%s"), ilabel, c , me->name, me->value); // Current tariff (legacy) if (ilabel == LABEL_PTEC) { char tarif_value[] = " "; // 4 spaces // Find the tariff index for (tarif = TARIF_TH ; tarif < TARIF_END ; tarif++) { GetTextIndexed(tarif_value, sizeof(tarif_value), tarif-1, kTarifValue); if (!strcmp(tarif_value, me->value)) { break; } } AddLog(LOG_LEVEL_DEBUG, PSTR("TIC: Tariff changed, now '%s' (%d)"), me->value, tarif); } // Current tariff (standard) else if (ilabel == LABEL_LTARF) { if (!strcmp_P(me->value, TELEINFO_STD_TARIFF_BASE)) { tarif = TARIF_TH; } else if (!strcmp_P(me->value, TELEINFO_STD_TARIFF_HC)) { tarif = TARIF_HC; } else if (!strcmp_P(me->value, TELEINFO_STD_TARIFF_HP)) { tarif = TARIF_HP; } AddLog(LOG_LEVEL_DEBUG, PSTR("TIC: Tariff name changed, now '%s'"), me->value); } // Current tariff index (standard) // This is the index on pointer counter (not used just for information) else if (ilabel == LABEL_NTARF) { int index = atoi(me->value); AddLog(LOG_LEVEL_DEBUG, PSTR("TIC: Tariff index changed, now '%d'"), index); } // Wh indexes (legacy) else if ( ilabel == LABEL_HCHC || ilabel == LABEL_HCHP || ilabel == LABEL_BASE) { char value[32]; uint32_t hc = 0; uint32_t hp = 0; uint32_t total = 0; // Base, un seul index if (ilabel == LABEL_BASE) { total = atol(me->value); AddLog(LOG_LEVEL_DEBUG, PSTR("TIC: Base:%ld"), total); // Heures creuses/pleines calculer total } else { // Heures creuses get heures pleines if (ilabel == LABEL_HCHC) { hc = atol(me->value); if ( getValueFromLabelIndex(LABEL_HCHP, value) ) { hp = atol(value) ; } // Heures pleines, get heures creuses } else if (ilabel == LABEL_HCHP) { hp = atol(me->value); if ( getValueFromLabelIndex(LABEL_HCHC, value) ) { hc = atol(value) ; } } if (hc>0 && hp>0) { total = hc + hp; } AddLog(LOG_LEVEL_DEBUG, PSTR("TIC: HC:%ld HP:%ld Total:%ld"), hc, hp, total); } AddLog (LOG_LEVEL_INFO, PSTR ("TIC: Total counter updated to %ld Wh"), total); if (total>0) { Energy.import_active[0] = (float)total/1000.0f; EnergyUpdateTotal(); AddLog (LOG_LEVEL_DEBUG_MORE, PSTR ("TIC: import_active[0]=%.3fKWh"), Energy.import_active[0] ); } } // Wh total index (all contract) else if ( ilabel == LABEL_EAST) { uint32_t total = atol(me->value); Energy.import_active[0] = (float)total/1000.0f; EnergyUpdateTotal(); AddLog(LOG_LEVEL_DEBUG, PSTR("TIC: Total:%ldWh"), total); } // Wh indexes (standard) else if ( ilabel == LABEL_EASF01) { AddLog(LOG_LEVEL_DEBUG, PSTR("TIC: HC:%ld"), atol(me->value)); } else if ( ilabel == LABEL_EASF02) { AddLog(LOG_LEVEL_DEBUG, PSTR("TIC: HP:%ld"), atol(me->value)); } // Contract subscribed (legacy) else if (ilabel == LABEL_OPTARIF) { char contrat_value[] = " "; // 4 spaces // Find the contract index for (contrat = CONTRAT_BAS ; contrat < CONTRAT_END ; contrat++) { GetTextIndexed(contrat_value, sizeof(contrat_value), contrat, kContratValue); if (!strcmp(contrat_value, me->value)) { break; } } AddLog(LOG_LEVEL_DEBUG, PSTR("TIC: Contract changed, now '%s' (%d)"), me->value, contrat); } // Contract subscribed (standard is in clear text in value) else if (ilabel == LABEL_NGTF) { if (!strcmp_P(me->value, TELEINFO_STD_CONTRACT_BASE)) { contrat = CONTRAT_BAS; } else if (!strcmp_P(me->value, TELEINFO_STD_CONTRACT_HCHP)) { contrat = CONTRAT_HC; } AddLog(LOG_LEVEL_DEBUG, PSTR("TIC: Contract changed, now '%s'"), me->value); } // Contract subscribed (Power) else if (ilabel == LABEL_ISOUSC || ilabel == LABEL_PREF) { isousc = atoi( me->value); AddLog(LOG_LEVEL_DEBUG, PSTR("TIC: ISousc set to %d"), isousc); } // Serial Number of device else if (ilabel == LABEL_ADCO || ilabel == LABEL_ADSC) { strcpy(serialNumber, me->value); AddLog(LOG_LEVEL_DEBUG, PSTR("TIC: %s set to %s"), me->name, serialNumber); } } } } /* ====================================================================== Function: isBlacklistedLabel Purpose : check is a label is blacklisted for telemetry data Input : label name Output : true if blacklisted Comments: - ====================================================================== */ bool isBlacklistedLabel(char * name) { bool bl = false; // return strstr( kLabelBlacklist, name)==nullptr ? false : true; if ( strstr(kLabelBlacklist, name) ) { //if ( strstr("|PJOURF+1|MSG1|ADCO|", name) ) { bl = true; AddLog(LOG_LEVEL_DEBUG, PSTR("TIC: %s is blacklisted"), name); } return bl; } /* ====================================================================== Function: responseDumpTInfo Purpose : add teleinfo values into JSON response Input : 1st separator space if begining of JSON, else comma : select if append all data or just changed one Output : false if asked for changed value and none has changed else true Comments: - ====================================================================== */ bool ResponseAppendTInfo(char sep, bool all) { struct _ValueList * me = tinfo.getList(); char * p ; bool isNumber ; bool hasValue = false; // Loop thru all the teleinfo frame but // always check we don't buffer overflow of MQTT data while (me->next) { // go to next node me = me->next; if (me->name && me->value && *me->name && *me->value) { // Does this label blacklisted ? if (!isBlacklistedLabel(me->name)) { // Add values only if we want all data or if data has changed if (all || ( Settings->teleinfo.raw_report_changed && (me->flags & (TINFO_FLAGS_UPDATED | TINFO_FLAGS_ADDED | TINFO_FLAGS_ALERT) ) ) ) { isNumber = true; hasValue = true; p = me->value; // Specific treatment serial number don't convert to number later if (strcmp(me->name, "ADCO")==0 || strcmp(me->name, "ADSC")==0) { isNumber = false; } else { // check if value is number while (*p && isNumber) { if ( *p < '0' || *p > '9' ) { isNumber = false; } p++; } } // Avoid unneeded space if (sep == ' ') { ResponseAppend_P( PSTR("\"%s\":"), me->name ); } else { ResponseAppend_P( PSTR("%c\"%s\":"), sep, me->name ); } if (!isNumber) { ResponseAppend_P( PSTR("\"%s\""), me->value ); } else { ResponseAppend_P( PSTR("%ld"), atol(me->value)); } // Now JSON separator is needed sep =','; } } } } return hasValue; } /* ====================================================================== Function: NewFrameCallback Purpose : callback when we received a complete Teleinfo frama Input : linked list pointer on the concerned data Output : - Comments: - ====================================================================== */ void NewFrameCallback(struct _ValueList * me) { // Reset Energy Watchdog Energy.data_valid[0] = 0; // Deprecated see setOption108 // send teleinfo raw data only if setup like that if (Settings->teleinfo.raw_send) { // Do we need to skip this frame if (raw_skip == 0 ) { Response_P(PSTR("{\"TIC\":{")); // send teleinfo full frame or only changed data bool hasData = ResponseAppendTInfo(' ', Settings->teleinfo.raw_report_changed ? false : true ); ResponseJsonEndEnd(); // Publish adding ADCO serial number into the topic // Need setOption4 to be enabled // No need to send empty payload if (hasData) { MqttPublishPrefixTopicRulesProcess_P(TELE, PSTR(D_RSLT_SENSOR), false); } // Reset frame skip counter (if 0 it's disabled) raw_skip = Settings->teleinfo.raw_skip; } else { AddLog(LOG_LEVEL_DEBUG, PSTR("TIC: not sending yet, will do in %d frame(s)"), raw_skip); raw_skip--; } } } /* ====================================================================== Function: TInfoDrvInit Purpose : Tasmota core driver init Input : - Output : - Comments: - ====================================================================== */ void TInfoDrvInit(void) { // If one TInfo RX pin declared use it if (PinUsed(GPIO_TELEINFO_RX)) { tic_rx_pin = Pin(GPIO_TELEINFO_RX); TasmotaGlobal.energy_driver = XNRG_15; Energy.voltage_available = false; Energy.phase_count = 1; // init hardware energy counters Settings->flag3.hardware_energy_total = true; Settings->energy_kWhtotal = 0; } } /* ====================================================================== Function: TInfoInit Purpose : Tasmota core device init Input : - Output : - Comments: - ====================================================================== */ void TInfoInit(void) { if (!PinUsed(GPIO_TELEINFO_RX)) { return; } // ignore if pin not set int baudrate; // Deprecated SetOption102 - Set Baud rate for Teleinfo serial communication (0 = 1200 or 1 = 9600) // now set in bit field TeleinfoCfg if (Settings->teleinfo.mode_standard) { baudrate = 9600; tinfo_mode = TINFO_MODE_STANDARD; serial_buffer_size = TELEINFO_SERIAL_BUFFER_STANDARD; } else { baudrate = 1200; tinfo_mode = TINFO_MODE_HISTORIQUE; serial_buffer_size = TELEINFO_SERIAL_BUFFER_HISTORIQUE; } AddLog(LOG_LEVEL_INFO, PSTR("TIC: RX on GPIO%d, baudrate %d"), tic_rx_pin, baudrate); // Enable Teleinfo pin used, control it if (PinUsed(GPIO_TELEINFO_ENABLE)) { int8_t en_pin = Pin(GPIO_TELEINFO_ENABLE); pinMode(en_pin, OUTPUT); digitalWrite(en_pin, HIGH); AddLog(LOG_LEVEL_INFO, PSTR("TIC: Enable with GPIO%d"), en_pin); } AddLog(0,PSTR("TIC:Init:TSerial=0x%08X"),TInfoSerial); #ifdef ESP8266 // Allow GPIO3 AND GPIO13 with hardware fallback to 2 // Set buffer to nnn char to support 250ms loop at 9600 baud // In case of "on-the-fly" re-init, serial is already there, don't re-allocate if (!TInfoSerial) { TInfoSerial = new TasmotaSerial(tic_rx_pin, -1, 2, 0, serial_buffer_size); } //pinMode(rx_pin, INPUT_PULLUP); #endif // ESP8266 #ifdef ESP32 // Set buffer to nnn char to support 250ms loop at 9600 baud // In case of "on-the-fly" re-init, serial is already there, don't re-allocate if (!TInfoSerial) { TInfoSerial = new TasmotaSerial(tic_rx_pin, -1, 1, 0, serial_buffer_size); } #endif // ESP32 if (TInfoSerial && TInfoSerial->begin(baudrate, SERIAL_7E1)) { #ifdef ESP8266 if (TInfoSerial->hardwareSerial() ) { ClaimSerial(); // This is a hack, looks like begin does not take into account // the TS_SERIAL_7E1 configuration so on ESP8266 this is // working only on Serial RX pin (Hardware Serial) for now //SetSerialConfig(TS_SERIAL_7E1); //TInfoSerial->setTimeout(TINFO_READ_TIMEOUT); AddLog(LOG_LEVEL_INFO, PSTR("TIC: using hardware serial")); } else { AddLog(LOG_LEVEL_INFO, PSTR("TIC: using software serial")); } #endif // ESP8266 #ifdef ESP32 AddLog(LOG_LEVEL_DEBUG, PSTR("TIC: using hardserial %d"), TInfoSerial->getUart()); #endif // Init teleinfo tinfo.init(tinfo_mode); // Attach needed callbacks tinfo.attachADPS(ADPSCallback); tinfo.attachData(DataCallback); tinfo.attachNewFrame(NewFrameCallback); tinfo_found = true; if (Settings->teleinfo.raw_send) { raw_skip = Settings->teleinfo.raw_skip; AddLog(LOG_LEVEL_INFO, PSTR("TIC: Raw mode enabled")); if (raw_skip) { AddLog(LOG_LEVEL_INFO, PSTR("TIC: Sending only one frame over %d "), raw_skip+1); } } } else { AddLog(LOG_LEVEL_INFO, PSTR("TIC: failed init serial")); } } /* ====================================================================== Function: TInfoCmd Purpose : Tasmota core command engine for Teleinfo commands Input : - Output : - Comments: - ====================================================================== */ bool TInfoCmd(void) { bool serviced = false; char command[CMDSZ]; //uint8_t name_len = strlen(D_NAME_TELEINFO); // At least "EnergyConfig" if (CMND_ENERGYCONFIG == Energy.command_code) { AddLog(LOG_LEVEL_DEBUG, PSTR("TIC: len %d, data '%s'"), XdrvMailbox.data_len, XdrvMailbox.data ? XdrvMailbox.data : "null" ); // Just "EnergyConfig" no more parameter // Show Teleinfo configuration if (XdrvMailbox.data_len == 0) { char mode_name[MAX_TINFO_COMMAND_NAME]; char raw_name[MAX_TINFO_COMMAND_NAME]; char rx_pin[8] = "None"; char en_pin[8] = "None" ; int index_mode = Settings->teleinfo.mode_standard ? CMND_TELEINFO_STANDARD : CMND_TELEINFO_HISTORIQUE; int index_raw = Settings->teleinfo.raw_send ? CMND_TELEINFO_RAW_FULL : CMND_TELEINFO_RAW_DISABLE; if (Settings->teleinfo.raw_send && Settings->teleinfo.raw_report_changed) { index_raw = CMND_TELEINFO_RAW_CHANGE; } // Get the mode and raw name GetTextIndexed(mode_name, MAX_TINFO_COMMAND_NAME, index_mode, kTInfo_Commands); GetTextIndexed(raw_name, MAX_TINFO_COMMAND_NAME, index_raw, kTInfo_Commands); if (PinUsed(GPIO_TELEINFO_RX)) { sprintf_P(rx_pin, PSTR("GPIO%d"), tic_rx_pin); } if (PinUsed(GPIO_TELEINFO_ENABLE)) { sprintf_P(en_pin, PSTR("GPIO%d"), Pin(GPIO_TELEINFO_ENABLE)); } AddLog(LOG_LEVEL_INFO, TELEINFO_COMMAND_SETTINGS, mode_name, rx_pin, en_pin, raw_name, Settings->teleinfo.raw_skip, Settings->teleinfo.raw_limit); serviced = true; // At least "EnergyConfig xyz" plus one space and one (or more) char // so "EnergyConfig 0" or "EnergyConfig Teleinfo Standard" } else if (XdrvMailbox.data_len) { // Now point on parameter char *pParam = XdrvMailbox.data; char *p = pParam; char *pValue = nullptr; // Check for sub parameter ie : EnergyConfig Teleinfo Skip value while(*p) { if (*p == ' ') { if (*(p+1)) { // Skip parameter by emptying th string so below getcommandcode works *p++ = 0x00; // Save parameter value for later pValue = p; } break; } p++; } int command_code = GetCommandCode(command, sizeof(command), pParam, kTInfo_Commands); AddLog(LOG_LEVEL_DEBUG, PSTR("TIC: param '%s' cmnd %d"), pParam, command_code); switch (command_code) { case CMND_TELEINFO_STANDARD: case CMND_TELEINFO_HISTORIQUE: { char mode_name[MAX_TINFO_COMMAND_NAME]; // Get the mode name GetTextIndexed(mode_name, MAX_TINFO_COMMAND_NAME, command_code, kTInfo_Commands); // Only if current settings is different than previous if ( (tinfo_mode==TINFO_MODE_STANDARD && command_code==CMND_TELEINFO_HISTORIQUE) || (tinfo_mode==TINFO_MODE_HISTORIQUE && command_code==CMND_TELEINFO_STANDARD) ) { // Change mode Settings->teleinfo.mode_standard = command_code == CMND_TELEINFO_STANDARD ? 1 : 0; AddLog(LOG_LEVEL_INFO, PSTR("TIC: '%s' mode"), mode_name); // Re init teleinfo (LibTeleinfo always free linked list on init) TInfoInit(); serviced = true; } else { AddLog(LOG_LEVEL_INFO, PSTR("TIC: No change to '%s' mode"), mode_name); } } break; case CMND_TELEINFO_RAW_DISABLE: case CMND_TELEINFO_RAW_FULL: case CMND_TELEINFO_RAW_CHANGE: { // Enable all RAW frame send char raw_name[MAX_TINFO_COMMAND_NAME]; // Get the raw name GetTextIndexed(raw_name, MAX_TINFO_COMMAND_NAME, command_code, kTInfo_Commands); if (command_code == CMND_TELEINFO_RAW_DISABLE) { // disable raw mode Settings->teleinfo.raw_send = 0; } else { // enable raw mode Settings->teleinfo.raw_send = 1; Settings->teleinfo.raw_report_changed = command_code == CMND_TELEINFO_RAW_CHANGE ? 1 : 0; } AddLog(LOG_LEVEL_INFO, PSTR("TIC: Raw to '%s'"), raw_name); serviced = true; } break; case CMND_TELEINFO_SKIP: { // Set Raw mode skip frame number char skip_name[MAX_TINFO_COMMAND_NAME]; // Get the raw name GetTextIndexed(skip_name, MAX_TINFO_COMMAND_NAME, command_code, kTInfo_Commands); int l = strlen(skip_name); // At least "EnergyConfig Teleinfo skip" plus one space and one (or more) digit // so "EnergyConfig Skip 0" or "EnergyConfig Skip 123" if ( pValue ) { int value = atoi(pValue); if (value >= 0 && value <= 255) { raw_skip = value; Settings->teleinfo.raw_skip = raw_skip; if (raw_skip ==0) { AddLog(LOG_LEVEL_INFO, PSTR("TIC: Raw no skip")); } else { AddLog(LOG_LEVEL_INFO, PSTR("TIC: Raw each %d frame(s)"), raw_skip+1); } serviced = true; } else { AddLog(LOG_LEVEL_INFO, PSTR("TIC: skip can be 0 to 255")); } } else { AddLog(LOG_LEVEL_INFO, PSTR("TIC: no skip value")); } } break; default: AddLog(LOG_LEVEL_INFO, PSTR("TIC: bad cmd param '%s'"), pParam); break; } } } return serviced ; } /* ====================================================================== Function: TInfoProcess Purpose : Tasmota callback executed often enough to read serial Input : - Output : - Comments: - ====================================================================== */ //#define MEASURE_PERF // Define to enable performance measurments void TInfoProcess(void) { static char buff[TELEINFO_PROCESS_BUFFER]; #ifdef MEASURE_PERF static unsigned long max_time = 0; unsigned long duration = millis(); static int max_size = 0; int tmp_size = 0; #endif if (!tinfo_found) { return; } int size = TInfoSerial->read(buff,TELEINFO_PROCESS_BUFFER); while ( size ) { #ifdef MEASURE_PERF tmp_size += size; #endif // Process as many bytes as available in serial buffer for(int i = 0; size; i++, size--) { buff[i] &= 0x7F; // data processing tinfo.process(buff[i]); } size = TInfoSerial->read(buff,TELEINFO_PROCESS_BUFFER); } #ifdef MEASURE_PERF duration = millis()-duration; if (duration > max_time) { max_time = duration; AddLog(LOG_LEVEL_INFO,PSTR("TIC: max_time=%lu"), max_time); } if (tmp_size > max_size) { max_size = tmp_size; AddLog(LOG_LEVEL_INFO,PSTR("TIC: max_size=%d"), max_size); } #endif } /* ====================================================================== Function: TInfoShow Purpose : Tasmota callback executed to send telemetry or WEB display Input : - Output : - Comments: - ====================================================================== */ #ifdef USE_WEBSERVER const char HTTP_ENERGY_ID_TELEINFO[] PROGMEM = "{s}ID{m}%s{e}" ; const char HTTP_ENERGY_INDEX_TELEINFO[] PROGMEM = "{s}%s{m}%s " D_UNIT_WATTHOUR "{e}" ; const char HTTP_ENERGY_PAPP_TELEINFO[] PROGMEM = "{s}" D_POWERUSAGE "{m}%d " D_UNIT_WATT "{e}" ; //const char HTTP_ENERGY_IINST_TELEINFO[] PROGMEM = "{s}" D_CURRENT "%s{m}%d " D_UNIT_AMPERE "{e}" ; const char HTTP_ENERGY_TARIF_TELEINFO[] PROGMEM = "{s}" D_CURRENT_TARIFF "{m}Heures %s{e}" ; const char HTTP_ENERGY_CONTRAT_TELEINFO[] PROGMEM = "{s}" D_CONTRACT "{m}%s %d" D_UNIT_AMPERE "{e}" ; const char HTTP_ENERGY_LOAD_TELEINFO[] PROGMEM = "{s}" D_POWER_LOAD "{m}%d" D_UNIT_PERCENT "{e}" ; const char HTTP_ENERGY_IMAX_TELEINFO[] PROGMEM = "{s}" D_MAX_CURRENT "{m}%d" D_UNIT_AMPERE "{e}" ; const char HTTP_ENERGY_IMAX3_TELEINFO[] PROGMEM = "{s}" D_MAX_CURRENT "{m}%d / %d / %d " D_UNIT_AMPERE "{e}" ; const char HTTP_ENERGY_PMAX_TELEINFO[] PROGMEM = "{s}" D_MAX_POWER "{m}%d" D_UNIT_WATT "{e}" ; const char HTTP_ENERGY_PMAX3_TELEINFO[] PROGMEM = "{s}" D_MAX_POWER "{m}%d / %d / %d " D_UNIT_WATT "{e}" ; const char HTTP_ENERGY_LOAD_BAR[] PROGMEM = "
" "
" "%d%%
" "
"; #endif // USE_WEBSERVER void TInfoShow(bool json) { // Since it's an Energy device , current, voltage and power are // already present on the telemetry frame. No need to add here // Just add the raw label/values of the teleinfo frame if (json) { // Add new value (not part of TIC JSON Object) if (isousc) { ResponseAppend_P(PSTR(",\"Load\":%d"),(int) ((Energy.current[0]*100.0f) / isousc)); } // add teleinfo TIC object ResponseAppend_P(PSTR("},\"TIC\":{")); ResponseAppendTInfo(' ', true); #ifdef USE_WEBSERVER } else { char name[33]; char value[33]; int percent; if (isousc) { uint8_t hue; uint8_t red, green, blue; char phase_color[8]; for (int i=0; i 100) { percent = 100; } // Gradiant from green (low load), yellow, orange and ending red (high load) // Hue from 128 (green) to 0 (red) so reversed from percent hue = changeUIntScale(100-percent, 0, 100, 0, 128); HsToRgb(hue, 128, &red, &green, &blue); snprintf_P(phase_color, sizeof(phase_color), PSTR("#%02X%02X%02X"), red, green, blue); WSContentSend_P(HTTP_ENERGY_LOAD_BAR, phase_color, percent, percent); } } if (tinfo_mode==TINFO_MODE_HISTORIQUE ) { if (getValueFromLabelIndex(LABEL_BASE, value) ) { GetTextIndexed(name, sizeof(name), LABEL_BASE, kLabel); WSContentSend_P(HTTP_ENERGY_INDEX_TELEINFO, name, value); } if (getValueFromLabelIndex(LABEL_HCHC, value) ) { GetTextIndexed(name, sizeof(name), LABEL_HCHC, kLabel); WSContentSend_P(HTTP_ENERGY_INDEX_TELEINFO, name, value); } if (getValueFromLabelIndex(LABEL_HCHP, value) ) { GetTextIndexed(name, sizeof(name), LABEL_HCHP, kLabel); WSContentSend_P(HTTP_ENERGY_INDEX_TELEINFO, name, value); } if (Energy.phase_count==3) { int imax[3]; for (int i=LABEL_IMAX1; i<=LABEL_IMAX3; i++) { if (getValueFromLabelIndex(i, value) ) { imax[i-LABEL_IMAX1] = atoi(value); } } WSContentSend_P(HTTP_ENERGY_IMAX3_TELEINFO, imax[0], imax[1], imax[2]); } else { if (getValueFromLabelIndex(LABEL_IMAX, value) ) { WSContentSend_P(HTTP_ENERGY_IMAX_TELEINFO, atoi(value)); } } if (getValueFromLabelIndex(LABEL_PMAX, value) ) { WSContentSend_P(HTTP_ENERGY_PMAX_TELEINFO, atoi(value)); } if (tarif) { GetTextIndexed(name, sizeof(name), tarif-1, kTarifName); WSContentSend_P(HTTP_ENERGY_TARIF_TELEINFO, name); } if (contrat && isousc) { int percent = (int) ((Energy.current[0]*100.0f) / isousc) ; GetTextIndexed(name, sizeof(name), contrat, kContratName); WSContentSend_P(HTTP_ENERGY_CONTRAT_TELEINFO, name, isousc); //WSContentSend_P(HTTP_ENERGY_LOAD_TELEINFO, percent); } } else if (tinfo_mode==TINFO_MODE_STANDARD ) { if (getValueFromLabelIndex(LABEL_EAST, value) ) { GetTextIndexed(name, sizeof(name), LABEL_EAST, kLabel); WSContentSend_P(HTTP_ENERGY_INDEX_TELEINFO, name, value); } if (getValueFromLabelIndex(LABEL_EASF01, value) ) { GetTextIndexed(name, sizeof(name), LABEL_EASF01, kLabel); WSContentSend_P(HTTP_ENERGY_INDEX_TELEINFO, name, value); } if (getValueFromLabelIndex(LABEL_EASF02, value) ) { GetTextIndexed(name, sizeof(name), LABEL_EASF02, kLabel); WSContentSend_P(HTTP_ENERGY_INDEX_TELEINFO, name, value); } if (getValueFromLabelIndex(LABEL_SMAXSN, value) ) { WSContentSend_P(HTTP_ENERGY_PMAX_TELEINFO, atoi(value)); } if (getValueFromLabelIndex(LABEL_LTARF, value) ) { WSContentSend_P(HTTP_ENERGY_TARIF_TELEINFO, value); } if (getValueFromLabelIndex(LABEL_NGTF, value) ) { if (isousc) { WSContentSend_P(HTTP_ENERGY_CONTRAT_TELEINFO, value, isousc); } } } // Serial number ADCO or ADSC if found if (*serialNumber) { WSContentSend_P(HTTP_ENERGY_ID_TELEINFO, serialNumber); } #endif // USE_WEBSERVER } } /*********************************************************************************************\ * Interface \*********************************************************************************************/ bool Xnrg15(uint8_t function) { bool result = false; switch (function) { case FUNC_INIT: TInfoInit(); break; case FUNC_PRE_INIT: TInfoDrvInit(); break; case FUNC_EVERY_250_MSECOND: if (tinfo_found) { TInfoProcess(); } break; case FUNC_COMMAND: if (tinfo_found) { result = TInfoCmd(); } break; case FUNC_JSON_APPEND: if (tinfo_found) { TInfoShow(1); } break; #ifdef USE_WEBSERVER case FUNC_WEB_SENSOR: if (tinfo_found) { TInfoShow(0); } break; #endif // USE_WEBSERVER } return result; } #endif // USE_TELEINFO #endif // USE_ENERGY_SENSOR