/*
  xsns_39_max31855.ino - MAX31855 thermocouple sensor support for Tasmota

  Copyright (C) 2021  Markus Past

  This program is free software: you can redistribute it and/or modify
  it under the terms of the GNU General Public License as published by
  the Free Software Foundation, either version 3 of the License, or
  (at your option) any later version.

  This program is distributed in the hope that it will be useful,
  but WITHOUT ANY WARRANTY; without even the implied warranty of
  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  GNU General Public License for more details.

  You should have received a copy of the GNU General Public License
  along with this program.  If not, see <http://www.gnu.org/licenses/>.
*/

#ifdef USE_MAX31855
/*********************************************************************************************\
 * MAX31855 and MAX6675 - Thermocouple
 *
 * SetOption94 0 - MAX31855
 * SetOption94 1 - MAX6675
\*********************************************************************************************/

#define XSNS_39              39

const char kMax31855Types[] PROGMEM = "MAX31855|MAX6675";

bool max31855_initialized = false;

struct MAX31855_ResultStruct {
  uint8_t ErrorCode;                  // Error Codes: 0 = No Error / 1 = TC open circuit / 2 = TC short to GND / 4 = TC short to VCC
  float ProbeTemperature;             // Measured temperature of the 'hot' TC junction (probe temp)
  float ReferenceTemperature;         // Measured temperature of the 'cold' TC junction (reference temp)
} MAX31855_Result;

void MAX31855_Init(void) {
  if (PinUsed(GPIO_MAX31855CS) && PinUsed(GPIO_MAX31855CLK) && PinUsed(GPIO_MAX31855DO)) {

    // Set GPIO modes for SW-SPI
    pinMode(Pin(GPIO_MAX31855CS), OUTPUT);
    pinMode(Pin(GPIO_MAX31855CLK), OUTPUT);
    pinMode(Pin(GPIO_MAX31855DO), INPUT);

    // Chip not selected / Clock low
    digitalWrite(Pin(GPIO_MAX31855CS), HIGH);
    digitalWrite(Pin(GPIO_MAX31855CLK), LOW);

    max31855_initialized = true;
  }
}

/*
*   MAX31855_ShiftIn(uint8_t Length)
*   Communicates with MAX31855 via SW-SPI and returns the raw data read from the chip
*/
int32_t MAX31855_ShiftIn(uint8_t Length) {
  int32_t dataIn = 0;

  digitalWrite(Pin(GPIO_MAX31855CS), LOW);       // CS = LOW -> Start SPI communication
  delayMicroseconds(1);                          // CS fall to output enable = max. 100ns

  for (uint32_t i = 0; i < Length; i++) {
    digitalWrite(Pin(GPIO_MAX31855CLK), LOW);
    delayMicroseconds(1);                        // CLK pulse width low = min. 100ns / CLK fall to output valid = max. 40ns
    dataIn <<= 1;
    if (digitalRead(Pin(GPIO_MAX31855DO))) {
      dataIn |= 1;
    }
    digitalWrite(Pin(GPIO_MAX31855CLK), HIGH);
    delayMicroseconds(1);                        // CLK pulse width high = min. 100ns
  }

  digitalWrite(Pin(GPIO_MAX31855CS), HIGH);      // CS = HIGH -> End SPI communication
  digitalWrite(Pin(GPIO_MAX31855CLK), LOW);
  return dataIn;
}

/*
*   MAX31855_GetProbeTemperature(int32_t RawData)
*   Decodes and returns the temperature of TCs 'hot' junction from RawData
*/
float MAX31855_GetProbeTemperature(int32_t RawData) {
  if (RawData & 0x80000000) {
    RawData = (RawData >> 18) | 0xFFFFC000;      // Negative value - Drop lower 18 bits and extend to negative number
  } else {
    RawData >>= 18;                              // Positiv value - Drop lower 18 bits
  }
  float result = (RawData * 0.25);               // MAX31855 LSB resolution is 0.25°C for probe temperature

  return ConvertTemp(result);                    // Check if we have to convert to Fahrenheit
}

/*
*   MAX31855_GetReferenceTemperature(int32_t RawData)
*   Decodes and returns the temperature of TCs 'cold' junction from RawData
*/
float MAX31855_GetReferenceTemperature(int32_t RawData) {
  if (RawData & 0x8000) {
    RawData = (RawData >> 4) | 0xFFFFF000;       // Negative value - Drop lower 4 bits and extend to negative number
  } else {
    RawData = (RawData >> 4) & 0x00000FFF;       // Positiv value - Drop lower 4 bits and mask out remaining bits (probe temp, error bit, etc.)
  }
  float result = (RawData * 0.0625);             // MAX31855 LSB resolution is 0.0625°C for reference temperature

  return ConvertTemp(result);                    // Check if we have to convert to Fahrenheit
}

/*
*   MAX31855_GetResult(void)
*   Acquires the raw data via SPI, checks for MAX31855 errors and fills result structure
*/
void MAX31855_GetResult(void) {
  if (Settings.flag4.max6675) {                  // SetOption94 - Implement simpler MAX6675 protocol instead of MAX31855
    int32_t RawData = MAX31855_ShiftIn(16);
    int32_t temp = (RawData >> 3) & ((1 << 12) - 1);

    /* Occasionally the sensor returns 0xfff, consider it an error */
    if (temp == ((1 << 12) - 1)) { return; }

    MAX31855_Result.ErrorCode = 0;
    MAX31855_Result.ReferenceTemperature = NAN;
    MAX31855_Result.ProbeTemperature = ConvertTemp(0.25 * temp);
  } else {
    int32_t RawData = MAX31855_ShiftIn(32);
    uint8_t probeerror = RawData & 0x7;

    MAX31855_Result.ErrorCode = probeerror;
    MAX31855_Result.ReferenceTemperature = MAX31855_GetReferenceTemperature(RawData);
    if (probeerror) {
      MAX31855_Result.ProbeTemperature = NAN;    // Return NaN if MAX31855 reports an error
    } else {
      MAX31855_Result.ProbeTemperature = MAX31855_GetProbeTemperature(RawData);
    }
  }
}

void MAX31855_Show(bool Json) {
  char sensor_name[10];
  GetTextIndexed(sensor_name, sizeof(sensor_name), Settings.flag4.max6675, kMax31855Types);

  if (Json) {
    ResponseAppend_P(PSTR(",\"%s\":{\"" D_JSON_PROBETEMPERATURE "\":%*_f,\"" D_JSON_REFERENCETEMPERATURE "\":%*_f,\"" D_JSON_ERROR "\":%d}"), \
      sensor_name,
      Settings.flag2.temperature_resolution, &MAX31855_Result.ProbeTemperature,
      Settings.flag2.temperature_resolution, &MAX31855_Result.ReferenceTemperature,
      MAX31855_Result.ErrorCode);
#ifdef USE_DOMOTICZ
    if (0 == TasmotaGlobal.tele_period) {
      DomoticzFloatSensor(DZ_TEMP, MAX31855_Result.ProbeTemperature);
    }
#endif  // USE_DOMOTICZ
#ifdef USE_KNX
    if (0 == TasmotaGlobal.tele_period) {
      KnxSensor(KNX_TEMPERATURE, MAX31855_Result.ProbeTemperature);
    }
#endif  // USE_KNX
#ifdef USE_WEBSERVER
  } else {
    WSContentSend_Temp(sensor_name, MAX31855_Result.ProbeTemperature);
#endif  // USE_WEBSERVER
  }
}

/*********************************************************************************************\
 * Interface
\*********************************************************************************************/

bool Xsns39(uint8_t function)
{
  bool result = false;

  if (FUNC_INIT == function) {
    MAX31855_Init();
  }
  else if (max31855_initialized) {
    switch (function) {
      case FUNC_EVERY_SECOND:
        MAX31855_GetResult();
        break;
      case FUNC_JSON_APPEND:
        MAX31855_Show(true);
        break;
#ifdef USE_WEBSERVER
      case FUNC_WEB_SENSOR:
        MAX31855_Show(false);
        break;
#endif  // USE_WEBSERVER
    }
  }
  return result;
}

#endif  // USE_MAX31855