## Migration Information See [wiki migration path](https://github.com/arendst/Sonoff-Tasmota/wiki/Upgrade#migration-path) for instructions how to migrate to a major version. Pay attention to the following version breaks due to dynamic settings updates: 1. Migrate to **Sonoff-Tasmota 3.9.x** 2. Migrate to **Sonoff-Tasmota 4.x** 3. Migrate to **Sonoff-Tasmota 5.14** 4. Migrate to **Sonoff-Tasmota 6.x** ## Release notes ### Change in default initial configuration tool Firmware binary **sonoff-classic.bin** supports **WifiManager, Wps and SmartConfig** for initial configuration. The default tool is **Wps**. To save memory space all other binaries support **WifiManager only**. See _changelog.ino how to enable them again. - Define WIFI_CONFIG_TOOL now contains the default behaviour once a SSID has been configured. - If no SSID is configured making a wifi connection impossible the new define WIFI_CONFIG_NO_SSID will be used. - While define WIFI_CONFIG_NO_SSID is set to WIFI_WPSCONFIG in my_user_config.h the compiler will check for define USE_WPS and if not enabled WIFI_CONFIG_NO_SSID will default to WIFI_MANAGER using the webserver. If define USE_WEBSERVER is also not enabled WIFI_CONFIG_NO_SSID will default to WIFI_SMARTCONFIG. If define USE_SMARTCONFIG is also not enabled WIFI_CONFIG_NO_SSID will default to a new option WIFI_SERIAL allowing to enter wifi parameters to serial which is always possible. ## Supported Modules The following hardware modules are supported. Module | Description ------------------|----------------------- 01 Sonoff Basic | Sonoff Basic Wifi Smart Switch 02 Sonoff RF | Sonoff RF Wifi Smart Switch with RF (434MHz) receiver 03 Sonoff SV | Sonoff SV Safe Voltage Wifi Smart Switch 04 Sonoff TH | Sonoff TH10/TH16 Wifi Smart Switch with Sensor connection 05 Sonoff Dual | Sonoff Dual Wifi Smart Switch 06 Sonoff Pow | Sonoff Pow Wifi Smart Switch with Energy Monitoring 07 Sonoff 4CH | Sonoff 4CH 4-gang Wifi Smart Switch 08 Sonoff S2X | Sonoff S20/S26 Wifi Smart Socket 09 Slampher | Sonoff Slampher Wifi Smart Light Bulb Socket with RF (434MHz) receiver 10 Sonoff Touch | Sonoff Touch Wifi Light Switch 11 Sonoff LED | Sonoff Led Wifi Led Pack (Retired) 12 1 Channel | 1 Channel Inching/Self Locking Wifi Switch 5V/12V 13 4 Channel | 4 Channel Inching/Self Locking Wifi Switch (Retired) 14 Motor C/AC | Motor Clockwise/Antoclockwise Wifi Switch (Retired) 15 ElectroDragon | Electrodragon Wifi IoT Board 16 EXS Relay(s) | Electronic Experience Store 1 or 2-gang Wifi Module 17 WiOn | WiOn Wifi Smart Socket 18 Generic | Any ESP8266/ESP8285 device like WeMos and NodeMCU 19 Sonoff Dev | Sonoff Dev Wifi Development Board 20 H801 | H801 Wifi RGBWW Led Controller 21 Sonoff SC | Sonoff SC Wifi Environmental Monitor 22 Sonoff BN-SZ | Sonoff BN-SZ01 Wifi Ceiling Led (Retired) 23 Sonoff 4CH Pro | Sonoff 4CH Pro 4-gang Wifi Smart Switch 24 Huafan SS | HuaFan Wifi Smart Socket 25 Sonoff Bridge | Sonoff RF (434MHz) transceive to Wifi Bridge 26 Sonoff B1 | Sonoff B1 Wifi RGBWW Led Bulb 27 AiLight | Ai-Thinker RGBW Led Bulb 28 Sonoff T1 1CH | Sonoff T1 1-gang Wifi Light Switch 29 Sonoff T1 2CH | Sonoff T1 2-gang Wifi Light Switch 30 Sonoff T1 3CH | Sonoff T1 3-gang Wifi Light Switch 31 Supla Espablo | 2-gang Wifi Module 32 Witty Cloud | Witty Cloud ESP8266 Wifi Development Board 33 Yunshan Relay | ESP8266 Wifi Network Relay Module 34 MagicHome | MagicHome, Flux-light and some Arilux LC10 RGB(W) Led Controller 35 Luani HVIO | Luani ESP8266 Wifi I/O Module 36 KMC 70011 | KMC Wifi Smart Socket with Energy Monitoring 37 Arilux LC01 | Arilux AL-LC01 RGB Led Controller 38 Arilux LC11 | Arilux AL-LC11 RGBWW Led Controller 39 Sonoff Dual R2 | Sonoff Dual R2 Wifi Smart Switch 40 Arilux LC06 | Arilux AL-LC06 RGB(WW) Led Controller 41 Sonoff S31 | Sonoff S31 Wifi Smart Socket with Energy Monitoring 42 Zengge WF017 | Zengge WF017 Wifi RGB(W) Led Controller 43 Sonoff Pow R2 | Sonoff Pow R2 Wifi Smart Switch with Energy Monitoring 44 Sonoff iFan02 | Sonoff iFan02 Wifi Smart Ceiling Fan with Light 45 BlitzWolf SHP | BlitzWolf BW-SHP2, BW-SHP6, HomeCube SP1, Gosund SP111, Teckin SP22 Wifi Smart Switch with Energy Monitoring 46 Shelly 1 | Shelly 1 Open Source Wifi Relay Module 47 Shelly 2 | Shelly 2 Wifi 2-gang Relay Module with Energy Monitoring 48 Xiaomi Philips | Xiaomi Philips Wifi WW Led Bulb 49 Neo Coolcam | Neo Coolcam Wifi Smart Socket 50 ESP Switch | ESP Switch 4-gang Wifi Switch with Leds 51 OBI Socket | OBI Wifi Smart Socket 52 Teckin | Teckin SP20 Wifi Smart Switch with Energy Monitoring 53 AplicWDP303075 | Aplic WDP 303075 CSL Wifi Smart Switch with Energy Monitoring 54 Tuya Dimmer | MIUO (and other Tuya based) Wifi Dimmer for Incandescent Lights and Led 55 Gosund SP1 v23 | Gosund SP1 v2.3 Wifi Smart Switch with Energy Monitoring 56 ARMTR Dimmer | ARMtronix Wifi dimmer for Incandescent Lights and Led 57 SK03 Outdoor | SK03 Outdoor Wifi Smart Switch with Energy Monitoring 58 PS-16-DZ | PS-16-DZ Wifi dimmer for Incandescent Lights and Led 59 Teckin US | Teckin US and ZooZee SA102 Wifi Smart Switch with Energy Monitoring ## Provided Binary Downloads The following binary downloads have been compiled with ESP8266/Arduino library version **2.3.0** - **sonoff-minimal.bin** = The Minimal version allows intermediate OTA uploads to support larger versions and does NOT change any persistent parameter. This version **should NOT be used for initial installation**. - **sonoff-classic.bin** = The Classic version allows **initial installation** using either WifiManager, Wps or SmartConfig. - **sonoff.bin** = The Sonoff version without Wps and SmartConfig configuration but adds more sensors. - **sonoff-BG.bin** to **sonoff-TW.bin** = The Sonoff version without Wps and SmartConfig configuration in different languages. - **sonoff-sensors.bin** = The Sensors version without Wps and SmartConfig configuration but adds even more useful sensors. - **sonoff-display.bin** = The Display version without Wps and SmartConfig configuration but adds display support. - **sonoff-knx.bin** = The Knx version without Wps and SmartConfig configuration and some other features but adds KNX support. See [Tasmota ESP/Arduino library version related issues](https://github.com/arendst/Sonoff-Tasmota/wiki/Theo's-Tasmota-Tips#20180523---relation-tasmota-and-esp8266arduino-core-version) why these files are still released using ESP/Arduino library version v2.3.0. ### Available Features and Sensors | Feature or Sensor | minimal | basic | classic | sonoff | knx | sensors | Remarks |--------------------------------|---------|-------|---------|--------|------|---------|-------- | ESP/Arduino lib v2.3.0 | 343k | 425k | 484k | 490k | 508k | 517k | | ESP/Arduino lib v2.4.2 | 372k | 451k | 497k | 517k | 533k | 541k | No sleep | | | | | | | | | MY_LANGUAGE en-GB | x | x | x | x | x | x | | MQTT_LIBRARY_TYPE PUBSUBCLIENT | x | x | x | x | x | x | | USE_WPS | - | - | x | - | - | - | WPS | USE_SMARTCONFIG | - | - | x | - | - | - | SmartConfig | USE_ARDUINO_OTA | - | - | - | - | - | - | | USE_DOMOTICZ | - | - | x | x | x | x | | USE_HOME_ASSISTANT | - | - | x | x | x | x | | USE_MQTT_TLS | - | - | - | - | - | - | | USE_KNX | - | - | - | - | x | - | | USE_WEBSERVER | x | x | x | x | x | x | WifiManager | USE_EMULATION | - | x | x | x | - | x | | USE_DISCOVERY | - | - | x | x | x | x | | WEBSERVER_ADVERTISE | - | - | x | x | x | x | | MQTT_HOST_DISCOVERY | - | - | x | x | x | x | | USE_TIMERS | - | x | - | x | x | x | | USE_TIMERS_WEB | - | x | - | x | x | x | | USE_SUNRISE | - | x | - | x | x | x | | USE_RULES | - | x | - | x | x | x | | | | | | | | | USE_ADC_VCC | x | x | x | x | x | - | | USE_DS18B20 | - | - | - | - | - | - | Single sensor | USE_DS18x20 | - | - | x | x | x | x | Multiple sensors | USE_DS18x20_LEGACY | - | - | - | - | - | - | Multiple sensors | | | | | | | | | Feature or Sensor | minimal | basic | classic | sonoff | knx | sensors | | USE_I2C | - | - | - | x | x | x | | USE_SHT | - | - | - | x | x | x | | USE_HTU | - | - | - | x | x | x | | USE_BMP | - | - | - | x | x | x | | USE_BME680 | - | - | - | - | - | x | | USE_BH1750 | - | - | - | x | x | x | | USE_VEML6070 | - | - | - | - | - | x | | USE_ADS1115 | - | - | - | - | - | x | | USE_ADS1115_I2CDEV | - | - | - | - | - | - | | USE_INA219 | - | - | - | - | - | x | | USE_SHT3X | - | - | - | x | x | x | | USE_TSL2561 | - | - | - | - | - | x | | USE_MGS | - | - | - | - | - | x | | USE_SGP30 | - | - | - | x | x | x | | USE_SI1145 | - | - | - | - | - | x | | USE_LM75AD | - | - | - | x | x | x | | USE_APDS9960 | - | - | - | - | - | - | | USE_MCP230xx | - | - | - | - | - | - | | USE_PCA9685 | - | - | - | - | - | - | | USE_MPR121 | - | - | - | - | - | - | | USE_CCS811 | - | - | - | - | - | - | | USE_MPU6050 | - | - | - | - | - | - | | USE_DS3231 | - | - | - | - | - | - | | | | | | | | | | Feature or Sensor | minimal | basic | classic | sonoff | knx | sensors | | USE_SPI | - | - | - | - | - | - | | USE_MHZ19 | - | - | - | x | x | x | | USE_SENSEAIR | - | - | - | x | x | x | | USE_PMS5003 | - | - | - | x | x | x | | USE_NOVA_SDS | - | - | - | x | x | x | | USE_PZEM004T | - | - | - | x | x | x | | USE_PZEM_AC | - | - | - | x | x | x | | USE_PZEM_DC | - | - | - | x | x | x | | USE_MCP39F501 | - | x | - | x | x | x | | USE_SERIAL_BRIDGE | - | - | - | x | x | x | | USE_SDM120 | - | - | - | - | - | x | | USE_SDM630 | - | - | - | - | - | x | | USE_MP3_PLAYER | - | - | - | - | - | x | | USE_TUYA_DIMMER | - | x | - | x | x | x | | USE_IR_REMOTE | - | - | - | x | x | x | | USE_IR_HVAC | - | - | - | - | - | x | | USE_IR_RECEIVE | - | - | - | x | x | x | | USE_WS2812 | - | - | x | x | x | x | | USE_WS2812_DMA | - | - | - | - | - | - | | USE_ARILUX_RF | - | - | - | x | x | x | | USE_SR04 | - | - | - | x | x | x | | USE_TM1638 | - | - | - | - | - | x | | USE_HX711 | - | - | - | x | x | x | | USE_RF_FLASH | - | - | - | x | x | x | | USE_TX20_WIND_SENSOR | - | - | - | x | x | x | | USE_RC_SWITCH | - | - | - | x | x | x | | USE_DISPLAY | - | - | - | - | - | - | ## Changelog Version 6.3.0 20181030 * Change web Configure Module GPIO drop down list order for better readability * Change status JSON message providing more switch and retain information * Change xsns_17_senseair.ino to use TasmotaModbus library * Change MCP230xx driver * Change PubSubClient Mqtt library to non-blocking EspEasy version * Change energy monitoring using energy sensor driver modules * Change Webserver page handler for easier extension (thx to Adrian Scillato) * Change pinmode for no-pullup defined switches to pullup when configured as switchmode PUSHBUTTON (=3 and up) (#3896) * Change default OTA Url to http://thehackbox.org/tasmota/release/sonoff.bin (#4170) * Remove support for MQTT Client esp-mqtt-arduino by #define MQTT_LIBRARY_TYPE MQTT_ESPMQTTARDUINO * Remove commands PowerCal, VoltageCal and CurrentCal as more functionality is provided by commands PowerSet, VoltageSet and CurrentSet * Remove restart after ntpserver change and force NTP re-sync (#3890) * Fix showing Period Power in energy threshold messages * Fix header file execution order by renaming user_config.h to my_user_config.h * Fix some TSL2561 driver issues (#3681) * Fix KNX PA exception. Regression from 6.2.1 buffer overflow caused by subStr() (#3700, #3710) * Fix setting and getting color temperature for Philips Hue emulation (#3733) * Fix ButtonRetain to not use default topic for clearing retain messages (#3737) * Fix syslog when emulation is selected (#2109, #3784) * Fix rule trigger POWER1#STATE execution after restart and SetOption0 is 0 (#3856) * Fix Home Assistant forced light discovery (#3908) * Fix invalid configuration restores and decode_config.py crc error when savedata = 0 (#3918) * Fix timer offset -00:00 causing 12:00 hour offset (#3923) * Fix I2CScan invalid JSON error message (#3925) * Fix exception when wrong Domoticz JSON message is received (#3963) * Fix Sonoff Bridge RfRaw receive (#4080, #4085) * Fix possible wifi connection error (#4044, #4083) * Fix invalid JSON floating point result from nan (Not a Number) and inf (Infinity) into null (#4147) * Fix rule mqtt#connected trigger when mqtt is disabled (#4149) * Add support for LCD, Matrix, TFT and Oled displays * Add support for Neo Coolcam Wifi Smart Power Plug * Add support for Michael Haustein ESP Switch * Add support for MQTT Client based on lwmqtt to be selected by #define MQTT_LIBRARY_TYPE MQTT_ARDUINOMQTT * Add support for Neo Coolcam Wifi Smart Power Plug * Add support for Michael Haustein ESP Switch * Add support for MQTT Client based on lwmqtt to be selected by #define MQTT_LIBRARY_TYPE MQTT_ARDUINOMQTT * Add support for DS3231 Real Time Clock * Add support for HX711 Load Cell with optional web GUI scale interface to demonstrate easy GUI plug-in * Add support for serial 8N2 communication to TasmotaModbus and TasmotaSerial libraries * Add support for RF transceiving using library RcSwitch (#2702) * Add support for Shelly 1 and Shelly 2 (#2789) * Add support for La Crosse TX20 Anemometer (#2654, #3146) * Add support for MP3 player using DFRobot RB-DFR-562 (#3723) * Add Support for Xiaomi-Philips Bulbs (#3787) * Add support for PCA9685 12bit 16pin hardware PWM driver (#3866) * Add support for EXS Relay V5.0 (#3810) * Add support for OBI Power Socket (#1988, #3944) * Add support for Teckin Power Socket with Energy Monitoring (#3950) * Add support for Pzem-003/017 DC Energy monitoring module (#3694) * Add support for Pzem-014/016 AC Energy monitoring module (#3694) * Add support for CSL Aplic WDP 303075 Power Socket with Energy Monitoring (#3991, #3996) * Add support for Tuya Dimmer (#469, #4075) * Add command Display to show all settings at once * Add command SerialSend5 to send raw serial data like "A5074100545293" * Add command WebRefresh 1000..10000 to control web page refresh in milliseconds. Default is 2345 * Add command WeightRes 0..3 to control display of decimals for kilogram * Add command RGBWWTable to support color calibration (#3933) * Add command Reset 4 (reset to defaults but keep wifi params) and Reset 5 (as reset 4 and also erase flash) (#4061) * Add command SetOption35 0..255 (seconds) to delay mDNS initialization to control possible Wifi connect problems * Add command SetOption52 0/1 to control display of optional time offset from UTC in JSON messages (#3629, #3711) * Add command SetOption53 0/1 to toggle gui display of Hostname and IP address (#1006, #2091) * Add authentication to HTTP web pages * Add decimals as input to commands PowerSet, VoltageSet and CurrentSet * Add tools/decode-config.py by Norbert Richter to decode configuration data. See file for information * Add define USE_DISPLAYS for selecting image sonoff-display * Add define USE_BASIC for selecting image sonoff-basic without most sensors * Add auto reload of main web page to some web restarts * Add TasmotaModbus library as very basic modbus wrapper for TasmotaSerial * Add more API callbacks and document API.md * Add Apparent Power and Reactive Power to Energy Monitoring devices (#251) * Add token %hostname% to command FullTopic (#3018) * Add Wifi channel number to state message (#3664) * Add user configurable GPIO02 and GPIO03 on H801 devices (#3692) * Add toggle function RGBW lights (#3695, #3697) * Add network information to display start screen (#3704) * Add sleep to Nova Fitness SDS01X sensor (#2841, #3724, #3749) * Add Analog input AD0 enabled to sonoff-sensors.bin (#3756, #3757) * Add power value below 5W to Sonoff Pow R2 and S31 (#3745) * Add RF Receiver control to module MagicHome to be used on Arilux LC10 (#3792) * Add userid/password option to decode-status.py (#3796) * Add delay after restart before processing rule sensor data (#3811) * Add force_update to Home Assistant discovery (#3873) * Add rule triggers SWITCH1#BOOT and POWER1#BOOT (#3904, #3910) * Add Hebrew language file (#3960) * Add TotalStartTime to Energy JSON message (#3971) * Add whitespace removal from RfRaw and SerialSend5 (#4020) * Add support for two BMP/BME sensors (#4195)