# RELEASE NOTES ## Migration Information **This version removes support for direct migration from versions before v8.1.0 (Doris)** See [migration path](https://tasmota.github.io/docs/Upgrading#migration-path) for instructions how to migrate to a major version. **Do not upgrade from minimal to minimal version. It will most likely fail at some point and will require flashing via serial.** If you do have to use minimal versions, always OTA to a full version of the same release before applying next minimal version. Pay attention to the following version breaks due to dynamic settings updates: 1. Migrate to **Sonoff-Tasmota 3.9.x** 2. Migrate to **Sonoff-Tasmota 4.x** 3. Migrate to **Sonoff-Tasmota 5.14** (http://ota.tasmota.com/tasmota/release_5.14.0/sonoff.bin) - NOTICE underscore as a dash is not supported in older versions 4. Migrate to **Sonoff-Tasmota 6.7.1** (http://ota.tasmota.com/tasmota/release_6.7.1/sonoff.bin) - NOTICE underscore as a dash is not supported in older versions 5. Migrate to **Tasmota 7.2.0** (http://ota.tasmota.com/tasmota/release-7.2.0/tasmota.bin) --- Major change in parameter storage layout --- 6. Migrate to **Tasmota 8.5.1** (http://ota.tasmota.com/tasmota/release-8.5.1/tasmota.bin) --- Major change in internal GPIO function representation --- 7. Migrate to **Tasmota 9.1** (http://ota.tasmota.com/tasmota/release-9.1.0/tasmota.bin.gz) 8. Upgrade to **latest release** (http://ota.tasmota.com/tasmota/release/tasmota.bin.gz) While fallback or downgrading is common practice it was never supported due to Settings additions or changes in newer releases. Starting with release **v9.1.0 Imogen** the internal GPIO function representation has changed in such a way that fallback is only possible to the latest GPIO configuration before installing **v9.1.0**. ## Supported Core versions This release will be supported from ESP8266/Arduino library Core version **2.7.7** due to reported security and stability issues on previous Core version. This will also support gzipped binaries. This release will be supported from ESP32/Arduino library Core version **3.0.2**. Support of ESP8266 Core versions before 2.7.7 and ESP32 Core versions before 3.0.2 have been removed. ### Known issues with v14.1.0 Due to the change from ESP32 Arduino Core2/IDF4 to Arduino Core3/IDF5 not all functionality has been restored. The following features are known not to work on ESP32: - Wifi Range Extender [#21200](https://github.com/arendst/Tasmota/issues/21200) ## Support of TLS In addition to TLS using fingerprints now also user supplied CA certs, AWS IoT and Azure IoT is supported. Read [full documentation](https://tasmota.github.io/docs/AWS-IoT) ## Initial configuration tools For initial configuration this release supports Webserver based **WifiManager** or **Serial** based command interface. ## Initial installation Easy initial installation of Tasmota can be performed using the [Tasmota WebInstaller](https://tasmota.github.io/install/). ## Provided Binary Downloads ### ESP8266 or ESP8285 based The following binary downloads have been compiled with ESP8266/Arduino library core version **2.7.7**. - **tasmota.bin** = The Tasmota version with most drivers for 1M+ flash. **RECOMMENDED RELEASE BINARY** - **tasmota-4M.bin** = The Tasmota version with most drivers and filesystem for 4M+ flash. - **tasmota-AD.bin** to **tasmota-VN.bin** = The Tasmota version in different languages for 1M+ flash. - **tasmota-lite.bin** = The Lite version without most drivers and sensors for 1M+ flash. - **tasmota-knx.bin** = The Knx version without some features but adds KNX support for 1M+ flash. - **tasmota-sensors.bin** = The Sensors version adds more useful sensors for 1M+ flash. - **tasmota-ir.bin** = The InfraRed Receiver and transmitter version allowing all available protocols provided by library IRremoteESP8266 but without most other features for 1M+ flash. - **tasmota-display.bin** = The Display version without Energy Monitoring but adds display support for 1M+ flash. - **tasmota-zbbridge.bin** = The dedicated Sonoff Zigbee Bridge version for 2M+ flash. - **tasmota-zigbee.bin** = The dedicated cc25xx Zigbee Bridge version for 4M+ flash. Above binaries are also available as gzipped version allowing faster uploads. Latest released binaries can be downloaded from - https://github.com/arendst/Tasmota-firmware/tree/firmware/release-firmware - http://ota.tasmota.com/tasmota/release Historical binaries can be downloaded from - http://ota.tasmota.com/tasmota/release-14.1.0 The latter links can be used for OTA upgrades too like ``OtaUrl http://ota.tasmota.com/tasmota/release/tasmota.bin.gz`` ### ESP32, ESP32-C2, ESP32-C3, ESP32-C6, ESP32-S2 and ESP32-S3 based The following binary downloads have been compiled with ESP32/Arduino library core version **3.0.2**. - **tasmota32.bin** = The Tasmota version with most drivers including additional sensors and KNX for 4M+ flash. **RECOMMENDED RELEASE BINARY** - **tasmota32solo1.bin** = The Tasmota version with most drivers including additional sensors and KNX for single core ESP32 and 4M+ flash. - **tasmota32s2.bin** = The Tasmota version with most drivers including additional sensors and KNX for ESP32-S2 with serial and 4M+ flash. - **tasmota32s2cdc.bin** = The Tasmota version with most drivers including additional sensors and KNX for ESP32-S2 with serial over embedded USB CDC only and 4M+ flash. - **tasmota32s3.bin** = The Tasmota version with most drivers including additional sensors and KNX for ESP32-S3 with USB HWCDC and fallback to serial and 4M+ flash. - **tasmota32c2.bin** = The Tasmota version with most drivers including additional sensors and KNX for ESP32-C2 with serial and 4M+ flash. - **tasmota32c3.bin** = The Tasmota version with most drivers including additional sensors and KNX for ESP32-C2 with USB HWCDC and fallback to serial and 4M+ flash. - **tasmota32c6.bin** = The Tasmota version with most drivers including additional sensors and KNX for ESP32-C6 with USB HWCDC and fallback to serial and 4M+ flash. - **tasmota32-AD.bin** to **tasmota32-VN.bin** = The Tasmota version in different languages for 4M+ flash. - **tasmota32-bluetooth.bin** = The Bluetooth version adds BLE support for 4M+ flash. - **tasmota32-display.bin** = The Display version without Energy Monitoring but adds display support for 4M+ flash. - **tasmota32-ir.bin** = The InfraRed Receiver and transmitter version allowing all available protocols provided by library IRremoteESP8266 but without most other features for 4M+ flash. - **tasmota32-lvgl.bin** = The LVGL version adds Light and Versatile Graphics Library (LVGL) display support for 4M+ flash. - **tasmota32-nspanel.bin** = The Sonoff NSPanel Smart Scene Wall Switch version with HASPmota display support. - **tasmota32-webcam.bin** = The Webcam version adds webcam support for 4M+ flash. - **tasmota32-zbbridgepro.bin** - The Sonoff Zigbee Bridge Pro version with CC2652P firmware load support. Latest released binaries can be downloaded from - https://github.com/arendst/Tasmota-firmware/tree/firmware/release-firmware - https://ota.tasmota.com/tasmota32/release Historical binaries can be downloaded from - https://ota.tasmota.com/tasmota32/release-14.1.0 The latter links can be used for OTA upgrades too like ``OtaUrl https://ota.tasmota.com/tasmota32/release/tasmota32.bin`` ## Additional information [List](MODULES.md) of embedded modules. [Complete list](BUILDS.md) of available feature and sensors. ## Changelog v14.1.0.3 ### Added - Support for QMP6988 temperature and pressure sensor - Support for Sonoff WTS01 temperature sensor using SerialBridge in ``SSerialMode 3`` - Support for Sonoff POWCT Ring [#21131](https://github.com/arendst/Tasmota/issues/21131) - Skip MQTT response if command is prefixed with underscore [#21740](https://github.com/arendst/Tasmota/issues/21740) - Skip MQTT response if commands are executed prefixed with ``Backlog2`` (no delay) or ``Backlog3`` [#21740](https://github.com/arendst/Tasmota/issues/21740) - Extend command ``SetOption147 1`` to disable publish of IRReceived MQTT messages [#21574](https://github.com/arendst/Tasmota/issues/21574) - NeoPool data validation and communication statistics default enabled for ESP32 only [#21721](https://github.com/arendst/Tasmota/issues/21721) - ESP32 support for power and energy limit checks, like ``MaxEnergy2`` per phase [#21695](https://github.com/arendst/Tasmota/issues/21695) - Berry solidification of `bytes` instances [#21558](https://github.com/arendst/Tasmota/issues/21558) - Berry automatic rounding of float to int when calling C mapped functions [#21601](https://github.com/arendst/Tasmota/issues/21601) - Berry add `math.round` [#21602](https://github.com/arendst/Tasmota/issues/21602) - Berry `classof` extended to class methods [#21615](https://github.com/arendst/Tasmota/issues/21615) - Berry `tasmota.rtc("config_time")` [#21698](https://github.com/arendst/Tasmota/issues/21698) - Berry `math.min()` and `math.max()` [#21705](https://github.com/arendst/Tasmota/issues/21705) - Berry `FUNC_ANY_KEY` event calling `any_key()` [#21708](https://github.com/arendst/Tasmota/issues/21708) - Berry `FUNC_BUTTON_MULTI_PRESSED` event and make `FUNC_BUTTON_PRESSED` called only on state changes and once per second [#21711](https://github.com/arendst/Tasmota/issues/21711) - Berry `int64` added `low32()` and `high32()` methods, used in Matter [#21728](https://github.com/arendst/Tasmota/issues/21728) - Berry cam module and img class [#21743](https://github.com/arendst/Tasmota/issues/21743) - HASPmota rounds to nearest int values passed as 'real' [#21599](https://github.com/arendst/Tasmota/issues/21599) - Matter support for Air Quality sensors [#21559](https://github.com/arendst/Tasmota/issues/21559) - Matter support for bridged Air Quality [#21597](https://github.com/arendst/Tasmota/issues/21597) - Matter internal debug option [#21634](https://github.com/arendst/Tasmota/issues/21634) - Matter Fan support (virtual only) [#21637](https://github.com/arendst/Tasmota/issues/21637) - Matter show event name in logs [#21649](https://github.com/arendst/Tasmota/issues/21649) - Matter full support of events [#21698](https://github.com/arendst/Tasmota/issues/21698) - Matter support for 'Generic Switch' based on Tasmota Buttons [#21731](https://github.com/arendst/Tasmota/issues/21731) ### Changed - ESP8266 platform update from 2024.01.01 to 2024.06.00 [#21668](https://github.com/arendst/Tasmota/issues/21668) - ESP8266 Framework (Arduino Core) from v2.7.6 to v2.7.7 [#21668](https://github.com/arendst/Tasmota/issues/21668) - ESP32 platform update from 2024.05.13 to 2024.07.10 [#21745](https://github.com/arendst/Tasmota/issues/21745) - ESP32 Framework (Arduino Core) from v3.0.0 to v3.0.2 [#21694](https://github.com/arendst/Tasmota/issues/21694) - Optional MQTT_TELE_RETAIN to Energy Margins message replaced by ``SensorRetain`` - Display timing splash screen with display modes 1 to 5 - Allow receive or send using SerialBridge - SerialBridge command ``SSerialSend9`` replaced by ``SSerialMode`` - SML replace vars in descriptor and line [#21622](https://github.com/arendst/Tasmota/issues/21622) - NeoPool using temperature as only frequently changing value for NPTeleperiod [#21628](https://github.com/arendst/Tasmota/issues/21628) - NeoPool make compiler setting available by `user_config_override.h` [#21645](https://github.com/arendst/Tasmota/issues/21645) - ESP32 support for energy margin checks, like ``MaxPower2`` per phase [#21695](https://github.com/arendst/Tasmota/issues/21695) - ESP32 MI32 refactoring, bugfixes, generic device scanning [#21603](https://github.com/arendst/Tasmota/issues/21603) - ESP32 MI32 improve parser [#21648](https://github.com/arendst/Tasmota/issues/21648) - ESP32 TM1621 number overflow from "9999" to "12E3" [#21131](https://github.com/arendst/Tasmota/issues/21131) - Matter refactoring of bridged devices [#21575](https://github.com/arendst/Tasmota/issues/21575) - Matter filter suffix automatically added for sensors [#21589](https://github.com/arendst/Tasmota/issues/21589) - Matter support for Rain sensor [#21633](https://github.com/arendst/Tasmota/issues/21633) - Matter refactor reading of multiple attributes to reduce memory pressure [#21675](https://github.com/arendst/Tasmota/issues/21675) ### Fixed - On universal display remove default backlight power if a single PWM channel is used for backlight. Regression from 14.0.0.1 [#21726](https://github.com/arendst/Tasmota/issues/21726) - Shutter MQTT on inverted shutter [#21663](https://github.com/arendst/Tasmota/issues/21663) - Scripter TCP server [#21660](https://github.com/arendst/Tasmota/issues/21660) - ESP32 allow use of UART0 with enabled USB_CDC_CONSOLE [#21496](https://github.com/arendst/Tasmota/issues/21496) - Berry `input()` returns empty string and does not crash [#21565](https://github.com/arendst/Tasmota/issues/21565) - Berry `bytes.resize()` for large sizes [#21716](https://github.com/arendst/Tasmota/issues/21716) - Matter interverted attributes 0xFFF9 and 0xFFFB [#21636](https://github.com/arendst/Tasmota/issues/21636) - Matter CASE Sigma1 resumption mode for faster reconnection [#21644](https://github.com/arendst/Tasmota/issues/21644) - Matter TLV.U8 unsigned encoding [#21672](https://github.com/arendst/Tasmota/issues/21672) - Matter resumption final ack [#21673](https://github.com/arendst/Tasmota/issues/21673) ### Removed