/* zh-CN.h - localization for Chinese (Simplified) - China for Sonoff-Tasmota Copyright (C) 2018 Theo Arends (translated by killadm) This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . */ #ifndef _LANGUAGE_ZH_CN_H_ #define _LANGUAGE_ZH_CN_H_ /*************************** ATTENTION *******************************\ * * Due to memory constraints only UTF-8 is supported. * To save code space keep text as short as possible. * Time and Date provided by SDK can not be localized (yet). * Use online command StateText to translate ON, OFF, HOLD and TOGGLE. * Use online command Prefix to translate cmnd, stat and tele. * * Updated until v5.14.0b \*********************************************************************/ //#define LANGUAGE_MODULE_NAME // Enable to display "Module Generic" (ie Spanish), Disable to display "Generic Module" (ie English) #define LANGUAGE_LCID 2052 // HTML (ISO 639-1) Language Code #define D_HTML_LANGUAGE "zh" // "2017-03-07T11:08:02" - ISO8601:2004 #define D_YEAR_MONTH_SEPARATOR "-" #define D_MONTH_DAY_SEPARATOR "-" #define D_DATE_TIME_SEPARATOR "T" #define D_HOUR_MINUTE_SEPARATOR ":" #define D_MINUTE_SECOND_SEPARATOR ":" #define D_DAY3LIST "日 一 二 三 四 五 六 " #define D_MONTH3LIST "1月 2月 3月 4月 5月 6月 7月 8月 9月 10月11月12月" // Non JSON decimal separator #define D_DECIMAL_SEPARATOR "." // Common #define D_ADMIN "Admin" #define D_AIR_QUALITY "空气质量" #define D_AP "AP" // Access Point #define D_AS "名称:" #define D_AUTO "自动" #define D_BLINK "闪烁" #define D_BLINKOFF "闪烁关" #define D_BOOT_COUNT "启动次数" #define D_BRIGHTLIGHT "亮" #define D_BUTTON "按钮" #define D_BY "汉化: killadm 作者:" // Written by me #define D_BYTES "大小:" #define D_CELSIUS "摄氏" #define D_CO2 "二氧化碳" #define D_CODE "代码" // Button code #define D_COLDLIGHT "冷" #define D_COMMAND "命令:" #define D_CONNECTED "已连接" #define D_COUNT "数量:" #define D_COUNTER "计数器" #define D_CURRENT "电流" // As in Voltage and Current #define D_DATA "数据:" #define D_DARKLIGHT "暗" #define D_DEBUG "调试" #define D_DISABLED "禁用" #define D_DISTANCE "距离" #define D_DNS_SERVER "DNS服务器" #define D_DONE "完成" #define D_DST_TIME "DST" #define D_ECO2 "eCO2" #define D_EMULATION "设备模拟" #define D_ENABLED "启用" #define D_ERASE "擦除" #define D_ERROR "错误" #define D_FAHRENHEIT "华氏" #define D_FAILED "失败" #define D_FALLBACK "回退" #define D_FALLBACK_TOPIC "回退主题" #define D_FALSE "False" #define D_FILE "文件:" #define D_FREE_MEMORY "空闲内存" #define D_FREQUENCY "频率" #define D_GAS "气体" #define D_GATEWAY "网关" #define D_GROUP "组:" #define D_HOST "主机" #define D_HOSTNAME "主机名" #define D_HUMIDITY "湿度" #define D_ILLUMINANCE "照度" #define D_IMMEDIATE "单次按键" // Button immediate #define D_INDEX "索引:" #define D_INFO "信息" #define D_INFRARED "红外线" #define D_INITIALIZED "初始化完成" #define D_IP_ADDRESS "IP地址" #define D_LIGHT "灯" #define D_LWT "LWT" #define D_MODULE "模块" #define D_MQTT "MQTT" #define D_MULTI_PRESS "多次按键" #define D_NOISE "嘈杂" #define D_NONE "无" #define D_OFF "关" #define D_OFFLINE "离线" #define D_OK "好" #define D_ON "开" #define D_ONLINE "在线" #define D_PASSWORD "密码" #define D_PORT "端口" #define D_POWER_FACTOR "功率因数" #define D_POWERUSAGE "功率" #define D_POWERUSAGE_ACTIVE "有功功率" #define D_POWERUSAGE_APPARENT "视在功率" #define D_POWERUSAGE_REACTIVE "无功功率" #define D_PRESSURE "气压" #define D_PRESSUREATSEALEVEL "海平面气压" #define D_PROGRAM_FLASH_SIZE "固件 Flash 大小" #define D_PROGRAM_SIZE "固件大小" #define D_PROJECT "项目:" #define D_RECEIVED "已接收" #define D_RESTART "重启" #define D_RESTARTING "正在重启" #define D_RESTART_REASON "重启原因" #define D_RESTORE "恢复" #define D_RETAINED "已保留" #define D_RULE "规则" #define D_SAVE "保存" #define D_SENSOR "传感器" #define D_SSID "名称" #define D_START "开始" #define D_STD_TIME "STD" #define D_STOP "停止" #define D_SUBNET_MASK "子网掩码" #define D_SUBSCRIBE_TO "订阅" #define D_SUCCESSFUL "成功" #define D_SUNRISE "日出" #define D_SUNSET "日落" #define D_TEMPERATURE "温度" #define D_TO "to" #define D_TOGGLE "切换" #define D_TOPIC "主题" #define D_TRANSMIT "发送" #define D_TRUE "True" #define D_TVOC "TVOC" #define D_UPGRADE "升级" #define D_UPLOAD "上传" #define D_UPTIME "运行时间" #define D_USER "用户名" #define D_UTC_TIME "UTC" #define D_UV_INDEX "紫外线指数" #define D_UV_LEVEL "紫外线水平" #define D_VERSION "版本" #define D_VOLTAGE "电压" #define D_WARMLIGHT "暖" #define D_WEB_SERVER "Web Server" // sonoff.ino #define D_WARNING_MINIMAL_VERSION "警告：精简固件不支持配置持久化保存" #define D_LEVEL_10 "level 1-0" #define D_LEVEL_01 "level 0-1" #define D_SERIAL_LOGGING_DISABLED "串口日志已禁用" #define D_SYSLOG_LOGGING_REENABLED "Syslog 日志已开启" #define D_SET_BAUDRATE_TO "设置波特率为:" #define D_RECEIVED_TOPIC "接收到的主题:" #define D_DATA_SIZE "数据大小:" #define D_ANALOG_INPUT "Analog" // support.ino #define D_OSWATCH "osWatch" #define D_BLOCKED_LOOP "Blocked Loop" #define D_WPS_FAILED_WITH_STATUS "WPS 配置失败，状态:" #define D_ACTIVE_FOR_3_MINUTES "激活 3 分钟" #define D_FAILED_TO_START "未能启动" #define D_PATCH_ISSUE_2186 "Patch issue 2186" #define D_CONNECTING_TO_AP "连接到 AP" #define D_IN_MODE "模式:" #define D_CONNECT_FAILED_NO_IP_ADDRESS "连接失败，因为没有获取到 IP 地址" #define D_CONNECT_FAILED_AP_NOT_REACHED "连接失败，无法连接 AP" #define D_CONNECT_FAILED_WRONG_PASSWORD "连接失败，AP 密码不正确" #define D_CONNECT_FAILED_AP_TIMEOUT "连接失败，AP 超时" #define D_ATTEMPTING_CONNECTION "尝试连接..." #define D_CHECKING_CONNECTION "检查连接..." #define D_QUERY_DONE "查询完成。 发现 MQTT 服务" #define D_MQTT_SERVICE_FOUND "发现 MQTT 服务:" #define D_FOUND_AT "发现:" #define D_SYSLOG_HOST_NOT_FOUND "Syslog 主机未找到" // settings.ino #define D_SAVED_TO_FLASH_AT "保存到 flash:" #define D_LOADED_FROM_FLASH_AT "从 flash 载入:" #define D_USE_DEFAULTS "使用默认设置" #define D_ERASED_SECTOR "擦除扇区" // webserver.ino #define D_NOSCRIPT "To use Tasmota, please enable JavaScript" #define D_MINIMAL_FIRMWARE_PLEASE_UPGRADE "当前是精简版固件 - 请升级" #define D_WEBSERVER_ACTIVE_ON "Web 服务器地址:" #define D_WITH_IP_ADDRESS "IP 地址:" #define D_WEBSERVER_STOPPED "Web 服务已停止" #define D_FILE_NOT_FOUND "文件未找到" #define D_REDIRECTED "重定向到认证页面" #define D_WIFIMANAGER_SET_ACCESSPOINT_AND_STATION "Wifimanager 设置无线操作模式" #define D_WIFIMANAGER_SET_ACCESSPOINT "Wifimanager 设置接入点" #define D_TRYING_TO_CONNECT "尝试将设备连接到网络" #define D_RESTART_IN "重启需要" #define D_SECONDS "秒" #define D_DEVICE_WILL_RESTART "设备将在几秒钟内重启" #define D_BUTTON_TOGGLE "状态切换" #define D_CONFIGURATION "设置" #define D_INFORMATION "信息" #define D_FIRMWARE_UPGRADE "固件升级" #define D_CONSOLE "控制台" #define D_CONFIRM_RESTART "确认重启" #define D_CONFIGURE_MODULE "模块设置" #define D_CONFIGURE_WIFI "WiFi设置" #define D_CONFIGURE_MQTT "MQTT设置" #define D_CONFIGURE_DOMOTICZ "Domoticz设置" #define D_CONFIGURE_LOGGING "日志设置" #define D_CONFIGURE_OTHER "其他设置" #define D_CONFIRM_RESET_CONFIGURATION "确认重置配置" #define D_RESET_CONFIGURATION "重置配置" #define D_BACKUP_CONFIGURATION "备份配置" #define D_RESTORE_CONFIGURATION "还原配置" #define D_MAIN_MENU "主菜单" #define D_MODULE_PARAMETERS "模块设置" #define D_MODULE_TYPE "模块类型" #define D_GPIO "GPIO" #define D_SERIAL_IN "串口输入(RX)" #define D_SERIAL_OUT "串口输出(TX)" #define D_WIFI_PARAMETERS "Wifi设置" #define D_SCAN_FOR_WIFI_NETWORKS "扫描无线网络" #define D_SCAN_DONE "扫描完毕" #define D_NO_NETWORKS_FOUND "未找到任何网络" #define D_REFRESH_TO_SCAN_AGAIN "刷新并重试" #define D_DUPLICATE_ACCESSPOINT "重复AP" #define D_SKIPPING_LOW_QUALITY "忽略弱信号网络" #define D_RSSI "RSSI" #define D_WEP "WEP" #define D_WPA_PSK "WPA PSK" #define D_WPA2_PSK "WPA2 PSK" #define D_AP1_SSID "AP1 名称" #define D_AP1_PASSWORD "AP1 密码" #define D_AP2_SSID "AP2 名称" #define D_AP2_PASSWORD "AP2 密码" #define D_MQTT_PARAMETERS "MQTT 设置" #define D_CLIENT "客户端" #define D_FULL_TOPIC "完整主题" #define D_LOGGING_PARAMETERS "日志设置" #define D_SERIAL_LOG_LEVEL "串口日志级别" #define D_WEB_LOG_LEVEL "Web 日志级别" #define D_SYS_LOG_LEVEL "Syslog 日志级别" #define D_MORE_DEBUG "全部调试" #define D_SYSLOG_HOST "Syslog 主机地址" #define D_SYSLOG_PORT "Syslog 端口" #define D_TELEMETRY_PERIOD "上报周期" #define D_OTHER_PARAMETERS "其他设置" #define D_WEB_ADMIN_PASSWORD "WEB 管理密码" #define D_MQTT_ENABLE "启用MQTT" #define D_FRIENDLY_NAME "昵称" #define D_BELKIN_WEMO "贝尔金 WeMo" #define D_HUE_BRIDGE "飞利浦 Hue 网桥" #define D_SINGLE_DEVICE "单设备" #define D_MULTI_DEVICE "多设备" #define D_SAVE_CONFIGURATION "保存设置" #define D_CONFIGURATION_SAVED "设置已保存" #define D_CONFIGURATION_RESET "设置已重置" #define D_PROGRAM_VERSION "固件版本" #define D_BUILD_DATE_AND_TIME "编译时间" #define D_CORE_AND_SDK_VERSION "内核和 SDK 版本" #define D_FLASH_WRITE_COUNT "Flash 写入次数" #define D_MAC_ADDRESS "MAC 地址" #define D_MQTT_HOST "MQTT 主机" #define D_MQTT_PORT "MQTT 端口" #define D_MQTT_CLIENT "MQTT 客户端" #define D_MQTT_USER "MQTT 用户名" #define D_MQTT_TOPIC "MQTT 主题" #define D_MQTT_GROUP_TOPIC "MQTT 主题组" #define D_MQTT_FULL_TOPIC "MQTT 完整主题" #define D_MDNS_DISCOVERY "mDNS 发现" #define D_MDNS_ADVERTISE "mDNS 广播" #define D_ESP_CHIP_ID "ESP 芯片 ID" #define D_FLASH_CHIP_ID "Flash 芯片 ID" #define D_FLASH_CHIP_SIZE "Flash 大小" #define D_FREE_PROGRAM_SPACE "空闲程序空间" #define D_UPGRADE_BY_WEBSERVER "通过 Web 升级" #define D_OTA_URL "OTA 地址" #define D_START_UPGRADE "开始升级" #define D_UPGRADE_BY_FILE_UPLOAD "通过文件升级" #define D_UPLOAD_STARTED "开始上传" #define D_UPGRADE_STARTED "开始升级" #define D_UPLOAD_DONE "上传完成" #define D_UPLOAD_ERR_1 "没有选择任何文件" #define D_UPLOAD_ERR_2 "没有足够空间" #define D_UPLOAD_ERR_3 "固件头不是 0xE9" #define D_UPLOAD_ERR_4 "固件大小超过 flash 容量" #define D_UPLOAD_ERR_5 "上传缓冲区不足，请先刷入精简固件再升级" #define D_UPLOAD_ERR_6 "上传失败。 启用日志级别 3 调试" #define D_UPLOAD_ERR_7 "上传取消" #define D_UPLOAD_ERR_8 "错误的固件" #define D_UPLOAD_ERR_9 "固件太大" #define D_UPLOAD_ERR_10 "初始化 RF 芯片失败" #define D_UPLOAD_ERR_11 "擦除 RF 芯片失败" #define D_UPLOAD_ERR_12 "写入 RF 芯片失败" #define D_UPLOAD_ERR_13 "解码 RF 固件失败" #define D_UPLOAD_ERROR_CODE "上传错误代码" #define D_ENTER_COMMAND "输入命令" #define D_ENABLE_WEBLOG_FOR_RESPONSE "如果想得到预期响应，请调整日志级别至: 2 信息" #define D_NEED_USER_AND_PASSWORD "需要 user=<用户名>&password=<密码>" // xdrv_00_mqtt.ino #define D_FINGERPRINT "验证 TLS 指纹..." #define D_TLS_CONNECT_FAILED_TO "TLS 连接失败" #define D_RETRY_IN "重试倒计时:" #define D_VERIFIED "验证成功" #define D_INSECURE "指纹无效导致连接不安全" #define D_CONNECT_FAILED_TO "连接失败:" // xdrv_wemohue.ino #define D_MULTICAST_DISABLED "组播已禁用" #define D_MULTICAST_REJOINED "组播已(重新)加入" #define D_MULTICAST_JOIN_FAILED "组播加入失败" #define D_FAILED_TO_SEND_RESPONSE "请求发送失败" #define D_WEMO "WeMo" #define D_WEMO_BASIC_EVENT "WeMo 基础事件" #define D_WEMO_EVENT_SERVICE "WeMo 事件服务" #define D_WEMO_META_SERVICE "WeMo meta 服务" #define D_WEMO_SETUP "WeMo 设置" #define D_RESPONSE_SENT "发送请求" #define D_HUE "Hue" #define D_HUE_BRIDGE_SETUP "Hue 设置" #define D_HUE_API_NOT_IMPLEMENTED "Hue API 未实现" #define D_HUE_API "Hue API" #define D_HUE_POST_ARGS "Hue POST 参数" #define D_3_RESPONSE_PACKETS_SENT "3 请求包发送" // xdrv_05_domoticz.ino #define D_DOMOTICZ_PARAMETERS "Domoticz 设置" #define D_DOMOTICZ_IDX "Idx" #define D_DOMOTICZ_KEY_IDX "Key idx" #define D_DOMOTICZ_SWITCH_IDX "开关 idx" #define D_DOMOTICZ_SENSOR_IDX "传感器 idx" #define D_DOMOTICZ_TEMP "温度" #define D_DOMOTICZ_TEMP_HUM "温度,湿度" #define D_DOMOTICZ_TEMP_HUM_BARO "温度,湿度,气压" #define D_DOMOTICZ_POWER_ENERGY "功率,电量" #define D_DOMOTICZ_ILLUMINANCE "照度" #define D_DOMOTICZ_COUNT "数值/PM1" #define D_DOMOTICZ_VOLTAGE "电压/PM2.5" #define D_DOMOTICZ_CURRENT "电流/PM10" #define D_DOMOTICZ_AIRQUALITY "空气质量" #define D_DOMOTICZ_UPDATE_TIMER "更新计时器" // xdrv_09_timers.ino #define D_CONFIGURE_TIMER "定时器设置" #define D_TIMER_PARAMETERS "定时器参数" #define D_TIMER_ENABLE "启用定时器" #define D_TIMER_ARM "启用" #define D_TIMER_TIME "时间" #define D_TIMER_DAYS "天" #define D_TIMER_REPEAT "重复" #define D_TIMER_OUTPUT "输出" #define D_TIMER_ACTION "动作" // xdrv_10_knx.ino #define D_CONFIGURE_KNX "KNX 配置" #define D_KNX_PARAMETERS "KNX 参数" #define D_KNX_GENERAL_CONFIG "同用" #define D_KNX_PHYSICAL_ADDRESS "物理地址" #define D_KNX_PHYSICAL_ADDRESS_NOTE "( 在 KNX 网络上必须是唯一的 )" #define D_KNX_ENABLE "启用 KNX" #define D_KNX_GROUP_ADDRESS_TO_WRITE "要发送到组地址的数据" #define D_ADD "添加" #define D_DELETE "删除" #define D_REPLY "回复" #define D_KNX_GROUP_ADDRESS_TO_READ "用来接收数据的组地址" #define D_LOG_KNX "KNX: " #define D_RECEIVED_FROM "接收自" #define D_KNX_COMMAND_WRITE "写" #define D_KNX_COMMAND_READ "读" #define D_KNX_COMMAND_OTHER "其他" #define D_SENT_TO "发送到" #define D_KNX_WARNING "组地址（0/0/0）被保留，不能使用。" #define D_KNX_ENHANCEMENT "通讯增强" #define D_KNX_TX_SLOT "KNX TX" #define D_KNX_RX_SLOT "KNX RX" // xdrv_03_energy.ino #define D_ENERGY_TODAY "今日用电量" #define D_ENERGY_YESTERDAY "昨日用电量" #define D_ENERGY_TOTAL "总用电量" // xsns_05_ds18b20.ino #define D_SENSOR_BUSY "传感器正忙" #define D_SENSOR_CRC_ERROR "传感器 CRC 校验错误" #define D_SENSORS_FOUND "发现传感器" // xsns_06_dht.ino #define D_TIMEOUT_WAITING_FOR "等待超时" #define D_START_SIGNAL_LOW "开始低电平" #define D_START_SIGNAL_HIGH "开始高电平" #define D_PULSE "pulse" #define D_CHECKSUM_FAILURE "校验失败" // xsns_07_sht1x.ino #define D_SENSOR_DID_NOT_ACK_COMMAND "传感器没有确认命令" #define D_SHT1X_FOUND "发现 SHT1X 传感器" // xsns_18_pms5003.ino #define D_STANDARD_CONCENTRATION "CF-1 PM" // Standard Particle CF-1 Particle Matter #define D_ENVIRONMENTAL_CONCENTRATION "PM" // Environmetal Particle Matter #define D_PARTICALS_BEYOND "颗粒物直径大于" // xsns_32_mpu6050.ino #define D_AX_AXIS "Accel. X-Axis" #define D_AY_AXIS "Accel. Y-Axis" #define D_AZ_AXIS "Accel. Z-Axis" #define D_GX_AXIS "Gyro X-Axis" #define D_GY_AXIS "Gyro Y-Axis" #define D_GZ_AXIS "Gyro Z-Axis" // sonoff_template.h #define D_SENSOR_NONE "无" #define D_SENSOR_DHT11 "DHT11" #define D_SENSOR_AM2301 "AM2301" #define D_SENSOR_SI7021 "SI7021" #define D_SENSOR_DS18X20 "DS18x20" #define D_SENSOR_I2C_SCL "I2C SCL" #define D_SENSOR_I2C_SDA "I2C SDA" #define D_SENSOR_WS2812 "WS2812" #define D_SENSOR_IRSEND "IRsend" #define D_SENSOR_SWITCH "Switch" // Suffix "1" #define D_SENSOR_BUTTON "Button" // Suffix "1" #define D_SENSOR_RELAY "Relay" // Suffix "1i" #define D_SENSOR_LED "Led" // Suffix "1i" #define D_SENSOR_PWM "PWM" // Suffix "1" #define D_SENSOR_COUNTER "Counter" // Suffix "1" #define D_SENSOR_IRRECV "IRrecv" #define D_SENSOR_MHZ_RX "MHZ Rx" #define D_SENSOR_MHZ_TX "MHZ Tx" #define D_SENSOR_PZEM_RX "PZEM Rx" #define D_SENSOR_PZEM_TX "PZEM Tx" #define D_SENSOR_SAIR_RX "SAir Rx" #define D_SENSOR_SAIR_TX "SAir Tx" #define D_SENSOR_SPI_CS "SPI CS" #define D_SENSOR_SPI_DC "SPI DC" #define D_SENSOR_BACKLIGHT "BkLight" #define D_SENSOR_PMS5003 "PMS5003" #define D_SENSOR_SDS0X1 "SDS0X1" #define D_SENSOR_SBR_RX "SerBr Rx" #define D_SENSOR_SBR_TX "SerBr Tx" #define D_SENSOR_SR04_TRIG "SR04 Tri" #define D_SENSOR_SR04_ECHO "SR04 Ech" #define D_SENSOR_SDM120_TX "SDM120 Tx" #define D_SENSOR_SDM120_RX "SDM120 Rx" #define D_SENSOR_SDM630_TX "SDM630 Tx" #define D_SENSOR_SDM630_RX "SDM630 Rx" #define D_SENSOR_TM1638_CLK "TM16 CLK" #define D_SENSOR_TM1638_DIO "TM16 DIO" #define D_SENSOR_TM1638_STB "TM16 STB" // Units #define D_UNIT_AMPERE "安" #define D_UNIT_CENTIMETER "厘米" #define D_UNIT_HOUR "时" #define D_UNIT_KILOOHM "千欧" #define D_UNIT_KILOWATTHOUR "千瓦时" #define D_UNIT_LUX "勒克斯" #define D_UNIT_MICROGRAM_PER_CUBIC_METER "微克/立方米" #define D_UNIT_MICROMETER "微米" #define D_UNIT_MICROSECOND "微秒" #define D_UNIT_MILLIAMPERE "毫安" #define D_UNIT_MILLISECOND "毫秒" #define D_UNIT_MINUTE "分" #define D_UNIT_PARTS_PER_BILLION "ppb" #define D_UNIT_PARTS_PER_DECILITER "每分升" #define D_UNIT_PARTS_PER_MILLION "ppm" #define D_UNIT_PRESSURE "百帕" #define D_UNIT_SECOND "秒" #define D_UNIT_SECTORS "扇区" #define D_UNIT_VA "VA" #define D_UNIT_VAR "VAr" #define D_UNIT_VOLT "伏" #define D_UNIT_WATT "瓦" #define D_UNIT_WATTHOUR "瓦时" #define D_UNIT_HERTZ "赫兹" // Log message prefix #define D_LOG_APPLICATION "APP: " // Application #define D_LOG_BRIDGE "BRG: " // Bridge #define D_LOG_CONFIG "CFG: " // Settings #define D_LOG_COMMAND "CMD: " // Command #define D_LOG_DEBUG "DBG: " // Debug #define D_LOG_DHT "DHT: " // DHT sensor #define D_LOG_DOMOTICZ "DOM: " // Domoticz #define D_LOG_DSB "DSB: " // DS18xB20 sensor #define D_LOG_HTTP "HTP: " // HTTP webserver #define D_LOG_I2C "I2C: " // I2C #define D_LOG_IRR "IRR: " // Infra Red Received #define D_LOG_LOG "LOG: " // Logging #define D_LOG_MODULE "MOD: " // Module #define D_LOG_MDNS "DNS: " // mDNS #define D_LOG_MQTT "MQT: " // MQTT #define D_LOG_OTHER "OTH: " // Other #define D_LOG_RESULT "RSL: " // Result #define D_LOG_RFR "RFR: " // RF Received #define D_LOG_SERIAL "SER: " // Serial #define D_LOG_SHT1 "SHT: " // SHT1x sensor #define D_LOG_UPLOAD "UPL: " // Upload #define D_LOG_UPNP "UPP: " // UPnP #define D_LOG_WIFI "WIF: " // Wifi #endif // _LANGUAGE_ZH_CN_H_