/* xsns_53_sml.ino - SML,OBIS,EBUS,RAW,COUNTER interface for Tasmota Created by Gerhard Mutz on 07.10.11. adapted for Tasmota Copyright (C) 2021 Gerhard Mutz and Theo Arends This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . */ #ifdef USE_SML_M #define XSNS_53 53 // default baudrate of D0 output #define SML_BAUDRATE 9600 // send this every N seconds (for meters that only send data on demand) // not longer supported, use scripting instead //#define SML_SEND_SEQ // debug counter input to led for counter1 and 2 //#define DEBUG_CNT_LED1 2 //#define DEBUG_CNT_LED1 2 // use analog optical counter sensor with AD Converter ADS1115 (not yet functional) //#define ANALOG_OPTO_SENSOR // fototransistor with pullup at A0, A1 of ADS1115 A3 and +3.3V // level and amplification are automatically set #include // use special no wait serial driver, should be always on #ifndef ESP32 #define SPECIAL_SS #endif #ifndef TMSBSIZ #define TMSBSIZ 256 #endif // addresses a bug in meter DWS74 //#define DWS74_BUG // JSON Strings do not translate // max 23 char #define DJ_TPWRIN "Total_in" #define DJ_TPWRIN0 "Total_in_0" #define DJ_TPWRIN1 "Total_in_1" #define DJ_TPWROUT "Total_out" #define DJ_TPWRCURR "Power_curr" #define DJ_TPWRCURR1 "Power_p1" #define DJ_TPWRCURR2 "Power_p2" #define DJ_TPWRCURR3 "Power_p3" #define DJ_CURR1 "Curr_p1" #define DJ_CURR2 "Curr_p2" #define DJ_CURR3 "Curr_p3" #define DJ_VOLT1 "Volt_p1" #define DJ_VOLT2 "Volt_p2" #define DJ_VOLT3 "Volt_p3" #define DJ_METERNR "Meter_number" #define DJ_METERSID "Meter_id" #define DJ_CSUM "Curr_summ" #define DJ_VAVG "Volt_avg" #define DJ_COUNTER "Count" struct METER_DESC { int8_t srcpin; uint8_t type; uint16_t flag; int32_t params; char prefix[8]; int8_t trxpin; uint8_t tsecs; char *txmem; uint8_t index; uint8_t max_index; char *script_str; uint8_t sopt; }; // this descriptor method is no longer supported // but still functional for simple meters // use scripting method instead // meter list , enter new meters here //===================================================== #define EHZ161_0 1 #define EHZ161_1 2 #define EHZ363 3 #define EHZH 4 #define EDL300 5 #define Q3B 6 #define COMBO3 7 #define COMBO2 8 #define COMBO3a 9 #define Q3B_V1 10 #define EHZ363_2 11 #define COMBO3b 12 #define WGS_COMBO 13 #define EBZD_G 14 #define SML_NO_OP 15 #define Q3C 16 // select this meter // SML_NO_OP ignores hardcoded interface #define METER SML_NO_OP //#define METER EHZ161_1 #if METER==SML_NO_OP #undef METERS_USED #define METERS_USED 0 struct METER_DESC const meter_desc[]={}; const uint8_t meter[]=""; #endif #if METER==EHZ161_0 #undef METERS_USED #define METERS_USED 1 struct METER_DESC const meter_desc[METERS_USED]={ [0]={3,'o',0,SML_BAUDRATE,"OBIS",-1,1,0}}; const uint8_t meter[]= "1,1-0:1.8.0*255(@1," D_TPWRIN ",kWh," DJ_TPWRIN ",4|" "1,1-0:2.8.0*255(@1," D_TPWROUT ",kWh," DJ_TPWROUT ",4|" "1,1-0:21.7.0*255(@1," D_TPWRCURR1 ",W," DJ_TPWRCURR1 ",0|" "1,1-0:41.7.0*255(@1," D_TPWRCURR2 ",W," DJ_TPWRCURR2 ",0|" "1,1-0:61.7.0*255(@1," D_TPWRCURR3 ",W," DJ_TPWRCURR3 ",0|" "1,=m 3+4+5 @1," D_TPWRCURR ",W," DJ_TPWRCURR ",0|" "1,1-0:0.0.0*255(@#)," D_METERNR ",," DJ_METERNR ",0"; #endif //===================================================== #if METER==EHZ161_1 #undef METERS_USED #define METERS_USED 1 struct METER_DESC const meter_desc[METERS_USED]={ [0]={3,'o',0,SML_BAUDRATE,"OBIS",-1,1,0}}; const uint8_t meter[]= "1,1-0:1.8.1*255(@1," D_TPWRIN ",kWh," DJ_TPWRIN ",4|" "1,1-0:2.8.1*255(@1," D_TPWROUT ",kWh," DJ_TPWROUT ",4|" "1,=d 2 10 @1," D_TPWRCURR ",W," DJ_TPWRCURR ",0|" "1,1-0:0.0.0*255(@#)," D_METERNR ",," DJ_METERNR ",0"; #endif //===================================================== #if METER==EHZ363 #undef METERS_USED #define METERS_USED 1 struct METER_DESC const meter_desc[METERS_USED]={ [0]={3,'s',0,SML_BAUDRATE,"SML",-1,1,0}}; // 2 Richtungszähler EHZ SML 8 bit 9600 baud, binär const uint8_t meter[]= //0x77,0x07,0x01,0x00,0x01,0x08,0x00,0xff "1,77070100010800ff@1000," D_TPWRIN ",kWh," DJ_TPWRIN ",4|" //0x77,0x07,0x01,0x00,0x02,0x08,0x00,0xff "1,77070100020800ff@1000," D_TPWROUT ",kWh," DJ_TPWROUT ",4|" //0x77,0x07,0x01,0x00,0x10,0x07,0x00,0xff "1,77070100100700ff@1," D_TPWRCURR ",W," DJ_TPWRCURR ",0|" //0x77,0x07,0x01,0x00,0x00,0x00,0x09,0xff "1,77070100000009ff@#," D_METERNR ",," DJ_METERNR ",0"; #endif //===================================================== #if METER==EHZH #undef METERS_USED #define METERS_USED 1 struct METER_DESC const meter_desc[METERS_USED]={ [0]={3,'s',0,SML_BAUDRATE,"SML",-1,1,0}}; // 2 Richtungszähler EHZ SML 8 bit 9600 baud, binär // verbrauch total const uint8_t meter[]= //0x77,0x07,0x01,0x00,0x01,0x08,0x00,0xff "1,77070100010800ff@1000," D_TPWRIN ",kWh," DJ_TPWRIN ",4|" //0x77,0x07,0x01,0x00,0x01,0x08,0x01,0xff "1,77070100020800ff@1000," D_TPWROUT ",kWh," DJ_TPWROUT ",4|" //0x77,0x07,0x01,0x00,0x0f,0x07,0x00,0xff "1,770701000f0700ff@1," D_TPWRCURR ",W," DJ_TPWRCURR ",0"; #endif //===================================================== #if METER==EDL300 #undef METERS_USED #define METERS_USED 1 struct METER_DESC const meter_desc[METERS_USED]={ [0]={3,'s',0,SML_BAUDRATE,"SML",-1,1,0}}; // 2 Richtungszähler EHZ SML 8 bit 9600 baud, binär // verbrauch total const uint8_t meter[]= //0x77,0x07,0x01,0x00,0x01,0x08,0x00,0xff "1,77070100010800ff@1000," D_TPWRIN ",kWh," DJ_TPWRIN ",4|" //0x77,0x07,0x01,0x00,0x01,0x08,0x01,0xff "1,77070100020801ff@1000," D_TPWROUT ",kWh," DJ_TPWROUT ",4|" //0x77,0x07,0x01,0x00,0x0f,0x07,0x00,0xff "1,770701000f0700ff@1," D_TPWRCURR ",W," DJ_TPWRCURR ",0"; #endif #if METER==EBZD_G #undef METERS_USED #define METERS_USED 1 struct METER_DESC const meter_desc[METERS_USED]={ [0]={3,'s',0,SML_BAUDRATE,"strom",-1,1,0}}; const uint8_t meter[]= //0x77,0x07,0x01,0x00,0x01,0x08,0x00,0xff "1,77070100010800ff@1000," D_TPWRIN ",kWh," DJ_TPWRIN ",4|" // .. "1,77070100020800ff@1000," D_TPWROUT ",kWh," DJ_TPWROUT ",4|" //0x77,0x07,0x01,0x00,0x01,0x08,0x01,0xff "1,77070100010801ff@1000," D_TPWRCURR1 ",kWh," DJ_TPWRCURR1 ",4|" //0x77,0x07,0x01,0x00,0x01,0x08,0x02,0xff "1,77070100010802ff@1000," D_TPWRCURR2 ",kWh," DJ_TPWRCURR2 ",4|" // 77 07 01 00 10 07 00 FF "1,77070100100700ff@1," D_TPWRCURR ",W," DJ_TPWRCURR ",0|" // .. "1,77070100600100ff@#," D_METERNR ",," DJ_METERNR ",0"; #endif //===================================================== #if METER==Q3B #undef METERS_USED #define METERS_USED 1 struct METER_DESC const meter_desc[METERS_USED]={ [0]={3,'s',0,SML_BAUDRATE,"SML",-1,1,0}}; const uint8_t meter[]= //0x77,0x07,0x01,0x00,0x01,0x08,0x01,0xff "1,77070100010800ff@1000," D_TPWRIN ",kWh," DJ_TPWRIN ",4|" //0x77,0x07,0x01,0x00,0x02,0x08,0x01,0xff "1,77070100020801ff@1000," D_TPWROUT ",kWh," DJ_TPWROUT ",4|" //0x77,0x07,0x01,0x00,0x01,0x07,0x00,0xff "1,77070100010700ff@1," D_TPWRCURR ",W," DJ_TPWRCURR ",0"; #endif #if METER==COMBO3 // 3 Zähler Beispiel #undef METERS_USED #define METERS_USED 3 struct METER_DESC const meter_desc[METERS_USED]={ [0]={3,'o',0,SML_BAUDRATE,"OBIS",-1,1,0}, // harware serial RX pin [1]={14,'s',0,SML_BAUDRATE,"SML",-1,1,0}, // GPIO14 software serial [2]={4,'o',0,SML_BAUDRATE,"OBIS2",-1,1,0}}; // GPIO4 software serial // 3 Zähler definiert const uint8_t meter[]= "1,1-0:1.8.0*255(@1," D_TPWRIN ",kWh," DJ_TPWRIN ",4|" "1,1-0:2.8.0*255(@1," D_TPWROUT ",kWh," DJ_TPWROUT ",4|" "1,1-0:21.7.0*255(@1," D_TPWRCURR1 ",W," DJ_TPWRCURR1 ",0|" "1,1-0:41.7.0*255(@1," D_TPWRCURR2 ",W," DJ_TPWRCURR2 ",0|" "1,1-0:61.7.0*255(@1," D_TPWRCURR3 ",W," DJ_TPWRCURR3 ",0|" "1,=m 3+4+5 @1," D_TPWRCURR ",W," DJ_TPWRCURR ",0|" "1,1-0:0.0.0*255(@#)," D_METERNR ",," DJ_METERNR ",0|" "2,77070100010800ff@1000," D_TPWRIN ",kWh," DJ_TPWRIN ",4|" "2,77070100020800ff@1000," D_TPWROUT ",kWh," DJ_TPWROUT ",4|" "2,77070100100700ff@1," D_TPWRCURR ",W," DJ_TPWRCURR ",0|" "3,1-0:1.8.1*255(@1," D_TPWRIN ",kWh," DJ_TPWRIN ",4|" "3,1-0:2.8.1*255(@1," D_TPWROUT ",kWh," DJ_TPWROUT ",4|" "3,=d 2 10 @1," D_TPWRCURR ",W," DJ_TPWRCURR ",0|" "3,1-0:0.0.0*255(@#)," D_METERNR ",," DJ_METERNR ",0"; #endif #if METER==COMBO2 // 2 Zähler Beispiel #undef METERS_USED #define METERS_USED 2 struct METER_DESC const meter_desc[METERS_USED]={ [0]={3,'o',0,SML_BAUDRATE,"OBIS1",-1,1,0}, // harware serial RX pin [1]={14,'o',0,SML_BAUDRATE,"OBIS2",-1,1,0}}; // GPIO14 software serial // 2 Zähler definiert const uint8_t meter[]= "1,1-0:1.8.1*255(@1," D_TPWRIN ",kWh," DJ_TPWRIN ",4|" "1,1-0:2.8.1*255(@1," D_TPWROUT ",kWh," DJ_TPWROUT ",4|" "1,=d 2 10 @1," D_TPWRCURR ",W," DJ_TPWRCURR ",0|" "1,1-0:0.0.0*255(@#)," D_METERNR ",," DJ_METERNR ",0|" "2,1-0:1.8.1*255(@1," D_TPWRIN ",kWh," DJ_TPWRIN ",4|" "2,1-0:2.8.1*255(@1," D_TPWROUT ",kWh," DJ_TPWROUT ",4|" "2,=d 6 10 @1," D_TPWRCURR ",W," DJ_TPWRCURR ",0|" "2,1-0:0.0.0*255(@#)," D_METERNR ",," DJ_METERNR ",0"; #endif #if METER==COMBO3a #undef METERS_USED #define METERS_USED 3 struct METER_DESC const meter_desc[METERS_USED]={ [0]={3,'o',0,SML_BAUDRATE,"OBIS1",-1,1,0}, // harware serial RX pin [1]={14,'o',0,SML_BAUDRATE,"OBIS2",-1,1,0}, [2]={1,'o',0,SML_BAUDRATE,"OBIS3",-1,1,0}}; // 3 Zähler definiert const uint8_t meter[]= "1,=h --- Zähler Nr 1 ---|" "1,1-0:1.8.1*255(@1," D_TPWRIN ",kWh," DJ_TPWRIN ",4|" "1,1-0:2.8.1*255(@1," D_TPWROUT ",kWh," DJ_TPWROUT ",4|" "1,=d 2 10 @1," D_TPWRCURR ",W," DJ_TPWRCURR ",0|" "1,1-0:0.0.0*255(@#)," D_METERNR ",," DJ_METERNR ",0|" "2,=h --- Zähler Nr 2 ---|" "2,1-0:1.8.1*255(@1," D_TPWRIN ",kWh," DJ_TPWRIN ",4|" "2,1-0:2.8.1*255(@1," D_TPWROUT ",kWh," DJ_TPWROUT ",4|" "2,=d 6 10 @1," D_TPWRCURR ",W," DJ_TPWRCURR ",0|" "2,1-0:0.0.0*255(@#)," D_METERNR ",," DJ_METERNR ",0|" "3,=h --- Zähler Nr 3 ---|" "3,1-0:1.8.1*255(@1," D_TPWRIN ",kWh," DJ_TPWRIN ",4|" "3,1-0:2.8.1*255(@1," D_TPWROUT ",kWh," DJ_TPWROUT ",4|" "3,=d 10 10 @1," D_TPWRCURR ",W," DJ_TPWRCURR ",0|" "3,1-0:0.0.0*255(@#)," D_METERNR ",," DJ_METERNR ",0"; #endif //===================================================== #if METER==Q3B_V1 #undef METERS_USED #define METERS_USED 1 struct METER_DESC const meter_desc[METERS_USED]={ [0]={3,'o',0,SML_BAUDRATE,"OBIS",-1,1,0}}; const uint8_t meter[]= "1,1-0:1.8.1*255(@1," D_TPWRIN ",kWh," DJ_TPWRIN ",4|" "1,=d 1 10 @1," D_TPWRCURR ",W," DJ_TPWRCURR ",0|" "1,1-0:0.0.0*255(@#)," D_METERNR ",," DJ_METERNR ",0"; #endif //===================================================== #if METER==EHZ363_2 #undef METERS_USED #define METERS_USED 1 struct METER_DESC const meter_desc[METERS_USED]={ [0]={3,'s',0,SML_BAUDRATE,"SML",-1,1,0}}; // 2 direction meter EHZ SML 8 bit 9600 baud, binary const uint8_t meter[]= //0x77,0x07,0x01,0x00,0x01,0x08,0x00,0xff "1,77070100010800ff@1000," D_TPWRIN ",kWh," DJ_TPWRIN ",4|" //0x77,0x07,0x01,0x00,0x02,0x08,0x00,0xff "1,77070100020800ff@1000," D_TPWROUT ",kWh," DJ_TPWROUT ",4|" //0x77,0x07,0x01,0x00,0x01,0x08,0x01,0xff "1,77070100010801ff@1000," D_TPWRCURR1 ",kWh," DJ_TPWRCURR1 ",4|" //0x77,0x07,0x01,0x00,0x01,0x08,0x02,0xff "1,77070100010802ff@1000," D_TPWRCURR2 ",kWh," DJ_TPWRCURR2 ",4|" //0x77,0x07,0x01,0x00,0x10,0x07,0x00,0xff "1,77070100100700ff@1," D_TPWRCURR ",W," DJ_TPWRCURR ",0|" //0x77,0x07,0x01,0x00,0x00,0x00,0x09,0xff "1,77070100000009ff@#," D_METERNR ",," DJ_METERNR ",0"; #endif // example OBIS power meter + gas and water counter #if METER==COMBO3b #undef METERS_USED #define METERS_USED 3 struct METER_DESC const meter_desc[METERS_USED]={ [0]={3,'o',0,SML_BAUDRATE,"OBIS",-1,1,0}, // harware serial RX pin [1]={14,'c',0,50,"Gas"}, // GPIO14 gas counter [2]={1,'c',0,10,"Wasser"}}; // water counter // 3 meters defined const uint8_t meter[]= "1,1-0:1.8.1*255(@1," D_TPWRIN ",kWh," DJ_TPWRIN ",4|" "1,1-0:2.8.1*255(@1," D_TPWROUT ",kWh," DJ_TPWROUT ",4|" "1,=d 2 10 @1," D_TPWRCURR ",W," DJ_TPWRCURR ",0|" "1,1-0:0.0.0*255(@#)," D_METERNR ",," DJ_METERNR ",0|" // with counters the comparison string must be exactly this string "2,1-0:1.8.0*255(@100," D_GasIN ",cbm," DJ_COUNTER ",2|" "3,1-0:1.8.0*255(@100," D_H2oIN ",cbm," DJ_COUNTER ",2"; #endif #if METER==WGS_COMBO #undef METERS_USED #define METERS_USED 3 struct METER_DESC const meter_desc[METERS_USED]={ [0]={1,'c',0,10,"H20",-1,1,0}, // GPIO1 water counter [1]={4,'c',0,50,"GAS",-1,1,0}, // GPIO4 gas counter [2]={3,'s',0,SML_BAUDRATE,"SML",-1,1,0}}; // SML harware serial RX pin const uint8_t meter[]= //----------------------------Wasserzähler--sensor53 c1------------------------------------ //"1,=h==================|" "1,1-0:1.8.0*255(@10000," D_H2oIN ",cbm," DJ_COUNTER ",4|" // 1 //----------------------------Gaszähler-----sensor53 c2------------------------------------ // bei gaszählern (countern) muss der Vergleichsstring so aussehen wie hier "2,=h==================|" "2,1-0:1.8.0*255(@100," D_GasIN ",cbm," DJ_COUNTER ",3|" // 2 //----------------------------Stromzähler-EHZ363W5--sensor53 d0---------------------------- "3,=h==================|" //0x77,0x07,0x01,0x00,0x01,0x08,0x00,0xff "3,77070100010800ff@1000," D_TPWRIN ",kWh," DJ_TPWRIN ",3|" // 3 Zählerstand Total "3,=h==================|" //0x77,0x07,0x01,0x00,0x10,0x07,0x00,0xff "3,77070100100700ff@1," D_TPWRCURR ",W," DJ_TPWRCURR ",2|" // 4 Aktuelle Leistung "3,=h -------------------------------|" "3,=m 10+11+12 @100," D_StL1L2L3 ",A," DJ_CSUM ",2|" // 5 Summe Aktuelle Ströme //"3,=h -------------------------------|" "3,=m 13+14+15/#3 @100," D_SpL1L2L3 ",V," DJ_VAVG ",2|" // 6 Mittelwert Spannungen "3,=h==================|" //0x77,0x07,0x01,0x00,0x24,0x07,0x00,0xff "3,77070100240700ff@1," D_TPWRCURR1 ",W," DJ_TPWRCURR1 ",2|" // 7 Wirkleistung L1 //0x77,0x07,0x01,0x00,0x38,0x07,0x00,0xff "3,77070100380700ff@1," D_TPWRCURR2 ",W," DJ_TPWRCURR2 ",2|" // 8 Wirkleistung L2 //0x77,0x07,0x01,0x00,0x4c,0x07,0x00,0xff "3,770701004c0700ff@1," D_TPWRCURR3 ",W," DJ_TPWRCURR3 ",2|" // 9 Wirkleistung L3 "3,=h -------------------------------|" //0x77,0x07,0x01,0x00,0x1f,0x07,0x00,0xff "3,770701001f0700ff@100," D_Strom_L1 ",A," DJ_CURR1 ",2|" // 10 Strom L1 //0x77,0x07,0x01,0x00,0x33,0x07,0x00,0xff "3,77070100330700ff@100," D_Strom_L2 ",A," DJ_CURR2 ",2|" // 11 Strom L2 //0x77,0x07,0x01,0x00,0x47,0x07,0x00,0xff "3,77070100470700ff@100," D_Strom_L3 ",A," DJ_CURR3 ",2|" // 12 Strom L3 "3,=h -------------------------------|" //0x77,0x07,0x01,0x00,0x20,0x07,0x00,0xff "3,77070100200700ff@100," D_Spannung_L1 ",V," DJ_VOLT1 ",2|" // 13 Spannung L1 //0x77,0x07,0x01,0x00,0x34,0x07,0x00,0xff "3,77070100340700ff@100," D_Spannung_L2 ",V," DJ_VOLT2 ",2|" // 14 Spannung L2 //0x77,0x07,0x01,0x00,0x48,0x07,0x00,0xff "3,77070100480700ff@100," D_Spannung_L3 ",V," DJ_VOLT3 ",2|" // 15 Spannung L3 "3,=h==================|" //0x77,0x07,0x01,0x00,0x00,0x00,0x09,0xff "3,77070100000009ff@#," D_METERSID ",," DJ_METERSID ",0|" // 16 Service ID "3,=h--------------------------------"; // letzte Zeile #endif #if METER==Q3C #undef METERS_USED #define METERS_USED 1 struct METER_DESC const meter_desc[METERS_USED]={ [0]={3,'s',0,SML_BAUDRATE,"SML",-1,1,0}}; const uint8_t meter[]= //0x77,0x07,0x01,0x00,0x01,0x08,0x01,0xff "1,77070101010800ff@1000," D_TPWRIN0 ",kWh," DJ_TPWRIN0 ",2|" // Verbrauch T0 //0x77,0x07,0x01,0x00,0x01,0x08,0x01,0xff "1,77070101010801ff@1000," D_TPWRIN1 ",kWh," DJ_TPWRIN1 ",2|" // Verbrauch T1 //0x77,0x07,0x01,0x00,0x01,0x07,0x00,0xff "1,77070100010700ff@1," D_TPWRCURR ",W," DJ_TPWRCURR ",0|" // Strom Gesamt //0x77,0x07,0x01,0x00,0x01,0x07,0x00,0xff "1,77070100150700ff@1," D_TPWRCURR1 ",W," DJ_TPWRCURR1 ",0|" // Strom L1 //0x77,0x07,0x01,0x00,0x01,0x07,0x00,0xff "1,77070100290700ff@1," D_TPWRCURR2 ",W," DJ_TPWRCURR2 ",0|" // Strom L2 //0x77,0x07,0x01,0x00,0x01,0x07,0x00,0xff "1,770701003D0700ff@1," D_TPWRCURR3 ",W," DJ_TPWRCURR3 ",0"; // Strom L3 #endif // this driver uses double because meter vars would not fit in float //===================================================== // median filter eliminates outliers, but uses much RAM and CPU cycles // 672 bytes extra RAM with SML_MAX_VARS = 16 // default compile on, but must be enabled by descriptor flag 16 // may be undefined if RAM must be saved #define USE_SML_MEDIAN_FILTER // max number of vars , may be adjusted #ifndef SML_MAX_VARS #define SML_MAX_VARS 20 #endif // max number of meters , may be adjusted #ifndef MAX_METERS #define MAX_METERS 5 #endif double meter_vars[SML_MAX_VARS]; // calulate deltas #define MAX_DVARS MAX_METERS*2 double dvalues[MAX_DVARS]; uint32_t dtimes[MAX_DVARS]; uint8_t meters_used; uint8_t dvalid[SML_MAX_VARS]; struct METER_DESC const *meter_desc_p; const uint8_t *meter_p; uint16_t meter_spos[MAX_METERS]; // software serial pointers #ifdef ESP8266 TasmotaSerial *meter_ss[MAX_METERS]; #endif // ESP8266 // serial buffers, may be made larger depending on telegram lenght #ifndef SML_BSIZ #define SML_BSIZ 48 #endif uint8_t smltbuf[MAX_METERS][SML_BSIZ]; // meter nr as string #define METER_ID_SIZE 24 char meter_id[MAX_METERS][METER_ID_SIZE]; #define VBUS_SYNC 0xaa #define SML_SYNC 0x77 #define EBUS_SYNC 0xaa #define EBUS_ESC 0xa9 uint8_t sml_send_blocks; uint8_t sml_100ms_cnt; uint8_t sml_desc_cnt; uint8_t sml_json_enable = 1; #ifdef USE_SML_MEDIAN_FILTER // median filter, should be odd size #define MEDIAN_SIZE 5 struct SML_MEDIAN_FILTER { double buffer[MEDIAN_SIZE]; int8_t index; } sml_mf[SML_MAX_VARS]; #ifndef FLT_MAX #define FLT_MAX 99999999 #endif double sml_median_array(double *array,uint8_t len) { uint8_t ind[len]; uint8_t mind=0,index=0,flg; double min=FLT_MAX; for (uint8_t hcnt=0; hcntbuffer[mf->index]=in; mf->index++; if (mf->index>=MEDIAN_SIZE) mf->index=0; return sml_median_array(mf->buffer,MEDIAN_SIZE); /* // sort list and take median memmove(tbuff,mf->buffer,sizeof(tbuff)); for (byte ocnt=0; ocnttbuff[count+1]) { tmp=tbuff[count]; tbuff[count]=tbuff[count+1]; tbuff[count+1]=tmp; flag=1; } } if (!flag) break; } return tbuff[MEDIAN_SIZE/2]; */ } #endif // ESP32 software serial read only #ifdef ESP32 #ifdef USE_ESP32_SW_SERIAL #ifndef ESP32_SWS_BUFFER_SIZE #define ESP32_SWS_BUFFER_SIZE 256 #endif class SML_ESP32_SERIAL : public Stream { public: SML_ESP32_SERIAL(uint32_t uart_index); virtual ~SML_ESP32_SERIAL(); bool begin(uint32_t speed, uint32_t smode, int32_t recpin, int32_t trxpin); int32_t peek(void); int32_t read(void) override; size_t write(uint8_t byte) override; int32_t available(void) override; void flush(void) override; void setRxBufferSize(uint32_t size); void updateBaudRate(uint32_t baud); void rxRead(void); using Print::write; private: // Member variables void setbaud(uint32_t speed); uint32_t uart_index; int8_t m_rx_pin; int8_t m_tx_pin; uint32_t cfgmode; uint32_t ss_byte; uint32_t ss_bstart; uint32_t ss_index; uint32_t m_bit_time; uint32_t m_in_pos; uint32_t m_out_pos; uint16_t serial_buffer_size; bool m_valid; uint8_t *m_buffer; HardwareSerial *hws; }; void IRAM_ATTR sml_callRxRead(void *self) { ((SML_ESP32_SERIAL*)self)->rxRead(); }; SML_ESP32_SERIAL::SML_ESP32_SERIAL(uint32_t index) { uart_index = index; m_valid = true; } SML_ESP32_SERIAL::~SML_ESP32_SERIAL(void) { if (hws) { hws->end(); } else { detachInterrupt(m_rx_pin); if (m_buffer) { free(m_buffer); } } } void SML_ESP32_SERIAL::setbaud(uint32_t speed) { m_bit_time = ESP.getCpuFreqMHz() * 1000000 / speed; } bool SML_ESP32_SERIAL::begin(uint32_t speed, uint32_t smode, int32_t recpin, int32_t trxpin) { if (!m_valid) { return false; } m_buffer = 0; if (recpin < 0) { setbaud(speed); m_rx_pin = -recpin; serial_buffer_size = ESP32_SWS_BUFFER_SIZE; m_buffer = (uint8_t*)malloc(serial_buffer_size); if (m_buffer == NULL) return false; pinMode(m_rx_pin, INPUT); attachInterruptArg(m_rx_pin, sml_callRxRead, this, CHANGE); m_in_pos = m_out_pos = 0; hws = nullptr; } else { cfgmode = smode; m_rx_pin = recpin; m_tx_pin = trxpin; hws = new HardwareSerial(uart_index); if (hws) { hws->begin(speed, cfgmode, m_rx_pin, m_tx_pin); } } return true; } void SML_ESP32_SERIAL::flush(void) { if (hws) { hws->flush(); } else { m_in_pos = m_out_pos = 0; } } int32_t SML_ESP32_SERIAL::peek(void) { if (hws) { return hws->peek(); } else { if (m_in_pos == m_out_pos) return -1; return m_buffer[m_out_pos]; } } int32_t SML_ESP32_SERIAL::read(void) { if (hws) { return hws->read(); } else { if (m_in_pos == m_out_pos) return -1; uint32_t ch = m_buffer[m_out_pos]; m_out_pos = (m_out_pos +1) % serial_buffer_size; return ch; } } int32_t SML_ESP32_SERIAL::available(void) { if (hws) { return hws->available(); } else { int avail = m_in_pos - m_out_pos; if (avail < 0) avail += serial_buffer_size; return avail; } } size_t SML_ESP32_SERIAL::write(uint8_t byte) { if (hws) { return hws->write(byte); } return 0; } void SML_ESP32_SERIAL::setRxBufferSize(uint32_t size) { if (hws) { hws->setRxBufferSize(size); } else { if (m_buffer) { free(m_buffer); } serial_buffer_size = size; m_buffer = (uint8_t*)malloc(size); } } void SML_ESP32_SERIAL::updateBaudRate(uint32_t baud) { if (hws) { hws->updateBaudRate(baud); } else { setbaud(baud); } } // no wait mode only 8N1 (or 7X1, obis only, ignoring parity) void IRAM_ATTR SML_ESP32_SERIAL::rxRead(void) { uint32_t diff; uint32_t level; #define SML_LASTBIT 9 level = digitalRead(m_rx_pin); if (!level && !ss_index) { // start condition ss_bstart = ESP.getCycleCount() - (m_bit_time / 4); ss_byte = 0; ss_index++; } else { // now any bit changes go here // calc bit number diff = (ESP.getCycleCount() - ss_bstart) / m_bit_time; if (!level && diff > SML_LASTBIT) { // start bit of next byte, store and restart // leave irq at change for (uint32_t i = ss_index; i <= SML_LASTBIT; i++) { ss_byte |= (1 << i); } uint32_t next = (m_in_pos + 1) % serial_buffer_size; if (next != (uint32_t)m_out_pos) { m_buffer[m_in_pos] = ss_byte >> 1; m_in_pos = next; } ss_bstart = ESP.getCycleCount() - (m_bit_time / 4); ss_byte = 0; ss_index = 1; return; } if (diff >= SML_LASTBIT) { // bit zero was 0, uint32_t next = (m_in_pos + 1) % serial_buffer_size; if (next != (uint32_t)m_out_pos) { m_buffer[m_in_pos] = ss_byte >> 1; m_in_pos = next; } ss_byte = 0; ss_index = 0; } else { // shift in for (uint32_t i = ss_index; i < diff; i++) { if (!level) ss_byte |= (1 << i); } ss_index = diff; } } } #endif // USE_ESP32_SW_SERIAL #endif // ESP32 #ifdef ESP32 #ifndef USE_ESP32_SW_SERIAL HardwareSerial *meter_ss[MAX_METERS]; #else SML_ESP32_SERIAL *meter_ss[MAX_METERS]; #endif #endif // ESP32 #ifdef ANALOG_OPTO_SENSOR // sensor over ADS1115 with i2c Bus uint8_t ads1115_up; // ads1115 driver #define SAMPLE_BIT (0x8000) #define ADS1115_COMP_QUEUE_SHIFT 0 #define ADS1115_COMP_LATCH_SHIFT 2 #define ADS1115_COMP_POLARITY_SHIFT 3 #define ADS1115_COMP_MODE_SHIFT 4 #define ADS1115_DATA_RATE_SHIFT 5 #define ADS1115_MODE_SHIFT 8 #define ADS1115_PGA_SHIFT 9 #define ADS1115_MUX_SHIFT 12 enum ads1115_comp_queue { ADS1115_COMP_QUEUE_AFTER_ONE = 0, ADS1115_COMP_QUEUE_AFTER_TWO = 0x1 << ADS1115_COMP_QUEUE_SHIFT, ADS1115_COMP_QUEUE_AFTER_FOUR = 0x2 << ADS1115_COMP_QUEUE_SHIFT, ADS1115_COMP_QUEUE_DISABLE = 0x3 << ADS1115_COMP_QUEUE_SHIFT, ADS1115_COMP_QUEUE_MASK = 0x3 << ADS1115_COMP_QUEUE_SHIFT, }; enum ads1115_comp_latch { ADS1115_COMP_LATCH_NO = 0, ADS1115_COMP_LATCH_YES = 1 << ADS1115_COMP_LATCH_SHIFT, ADS1115_COMP_LATCH_MASK = 1 << ADS1115_COMP_LATCH_SHIFT, }; enum ads1115_comp_polarity { ADS1115_COMP_POLARITY_ACTIVE_LOW = 0, ADS1115_COMP_POLARITY_ACTIVE_HIGH = 1 << ADS1115_COMP_POLARITY_SHIFT, ADS1115_COMP_POLARITY_MASK = 1 << ADS1115_COMP_POLARITY_SHIFT, }; enum ads1115_comp_mode { ADS1115_COMP_MODE_WINDOW = 0, ADS1115_COMP_MODE_HYSTERESIS = 1 << ADS1115_COMP_MODE_SHIFT, ADS1115_COMP_MODE_MASK = 1 << ADS1115_COMP_MODE_SHIFT, }; enum ads1115_data_rate { ADS1115_DATA_RATE_8_SPS = 0, ADS1115_DATA_RATE_16_SPS = 0x1 << ADS1115_DATA_RATE_SHIFT, ADS1115_DATA_RATE_32_SPS = 0x2 << ADS1115_DATA_RATE_SHIFT, ADS1115_DATA_RATE_64_SPS = 0x3 << ADS1115_DATA_RATE_SHIFT, ADS1115_DATA_RATE_128_SPS = 0x4 << ADS1115_DATA_RATE_SHIFT, ADS1115_DATA_RATE_250_SPS = 0x5 << ADS1115_DATA_RATE_SHIFT, ADS1115_DATA_RATE_475_SPS = 0x6 << ADS1115_DATA_RATE_SHIFT, ADS1115_DATA_RATE_860_SPS = 0x7 << ADS1115_DATA_RATE_SHIFT, ADS1115_DATA_RATE_MASK = 0x7 << ADS1115_DATA_RATE_SHIFT, }; enum ads1115_mode { ADS1115_MODE_CONTINUOUS = 0, ADS1115_MODE_SINGLE_SHOT = 1 << ADS1115_MODE_SHIFT, ADS1115_MODE_MASK = 1 << ADS1115_MODE_SHIFT, }; enum ads1115_pga { ADS1115_PGA_TWO_THIRDS = 0, //±6.144 V ADS1115_PGA_ONE = 0x1 << ADS1115_PGA_SHIFT, //±4.096 V ADS1115_PGA_TWO = 0x2 << ADS1115_PGA_SHIFT, //±2.048 V ADS1115_PGA_FOUR = 0x3 << ADS1115_PGA_SHIFT, //±1.024 V ADS1115_PGA_EIGHT = 0x4 << ADS1115_PGA_SHIFT, //±0.512 V ADS1115_PGA_SIXTEEN = 0x5 << ADS1115_PGA_SHIFT, //±0.256 V ADS1115_PGA_MASK = 0x7 << ADS1115_PGA_SHIFT, }; enum ads1115_mux { ADS1115_MUX_DIFF_AIN0_AIN1 = 0, ADS1115_MUX_DIFF_AIN0_AIN3 = 0x1 << ADS1115_MUX_SHIFT, ADS1115_MUX_DIFF_AIN1_AIN3 = 0x2 << ADS1115_MUX_SHIFT, ADS1115_MUX_DIFF_AIN2_AIN3 = 0x3 << ADS1115_MUX_SHIFT, ADS1115_MUX_GND_AIN0 = 0x4 << ADS1115_MUX_SHIFT, ADS1115_MUX_GND_AIN1 = 0x5 << ADS1115_MUX_SHIFT, ADS1115_MUX_GND_AIN2 = 0x6 << ADS1115_MUX_SHIFT, ADS1115_MUX_GND_AIN3 = 0x7 << ADS1115_MUX_SHIFT, ADS1115_MUX_MASK = 0x7 << ADS1115_MUX_SHIFT, }; class ADS1115 { public: ADS1115(uint8_t address = 0x48); void begin(); uint8_t trigger_sample(); uint8_t reset(); bool is_sample_in_progress(); int16_t read_sample(); float sample_to_float(int16_t val); float read_sample_float(); void set_comp_queue(enum ads1115_comp_queue val) { set_config(val, ADS1115_COMP_QUEUE_MASK); } void set_comp_latching(enum ads1115_comp_latch val) { set_config(val, ADS1115_COMP_LATCH_MASK); } void set_comp_polarity(enum ads1115_comp_polarity val) { set_config(val, ADS1115_COMP_POLARITY_MASK); } void set_comp_mode(enum ads1115_comp_mode val) { set_config(val, ADS1115_COMP_MODE_MASK); } void set_data_rate(enum ads1115_data_rate val) { set_config(val, ADS1115_DATA_RATE_MASK); } void set_mode(enum ads1115_mode val) { set_config(val, ADS1115_MODE_MASK); } void set_pga(enum ads1115_pga val) { set_config(val, ADS1115_PGA_MASK); m_voltage_range = val >> ADS1115_PGA_SHIFT; } void set_mux(enum ads1115_mux val) { set_config(val, ADS1115_MUX_MASK); } private: void set_config(uint16_t val, uint16_t mask) { m_config = (m_config & ~mask) | val; } uint8_t write_register(uint8_t reg, uint16_t val); uint16_t read_register(uint8_t reg); uint8_t m_address; uint16_t m_config; int m_voltage_range; }; enum ads1115_register { ADS1115_REGISTER_CONVERSION = 0, ADS1115_REGISTER_CONFIG = 1, ADS1115_REGISTER_LOW_THRESH = 2, ADS1115_REGISTER_HIGH_THRESH = 3, }; #define FACTOR 32768.0 static float ranges[] = { 6.144 / FACTOR, 4.096 / FACTOR, 2.048 / FACTOR, 1.024 / FACTOR, 0.512 / FACTOR, 0.256 / FACTOR}; ADS1115::ADS1115(uint8_t address) { m_address = address; m_config = ADS1115_COMP_QUEUE_AFTER_ONE | ADS1115_COMP_LATCH_NO | ADS1115_COMP_POLARITY_ACTIVE_LOW | ADS1115_COMP_MODE_WINDOW | ADS1115_DATA_RATE_128_SPS | ADS1115_MODE_SINGLE_SHOT | ADS1115_MUX_GND_AIN0; set_pga(ADS1115_PGA_ONE); } uint8_t ADS1115::write_register(uint8_t reg, uint16_t val) { Wire.beginTransmission(m_address); Wire.write(reg); Wire.write(val>>8); Wire.write(val & 0xFF); return Wire.endTransmission(); } uint16_t ADS1115::read_register(uint8_t reg) { Wire.beginTransmission(m_address); Wire.write(reg); Wire.endTransmission(); uint8_t result = Wire.requestFrom((int)m_address, 2, 1); if (result != 2) { return 0; } uint16_t val; val = Wire.read() << 8; val |= Wire.read(); return val; } void ADS1115::begin() { Wire.begin(); } uint8_t ADS1115::trigger_sample() { return write_register(ADS1115_REGISTER_CONFIG, m_config | SAMPLE_BIT); } uint8_t ADS1115::reset() { Wire.beginTransmission(0); Wire.write(0x6); return Wire.endTransmission(); } bool ADS1115::is_sample_in_progress() { uint16_t val = read_register(ADS1115_REGISTER_CONFIG); return (val & SAMPLE_BIT) == 0; } int16_t ADS1115::read_sample() { return read_register(ADS1115_REGISTER_CONVERSION); } float ADS1115::sample_to_float(int16_t val) { return val * ranges[m_voltage_range]; } float ADS1115::read_sample_float() { return sample_to_float(read_sample()); } ADS1115 adc; void ADS1115_init(void) { ads1115_up=0; if (!TasmotaGlobal.i2c_enabled) return; adc.begin(); adc.set_data_rate(ADS1115_DATA_RATE_128_SPS); adc.set_mode(ADS1115_MODE_CONTINUOUS); adc.set_mux(ADS1115_MUX_DIFF_AIN0_AIN3); adc.set_pga(ADS1115_PGA_TWO); int16_t val = adc.read_sample(); ads1115_up=1; } #endif char sml_start; uint8_t dump2log=0; uint8_t ser_act_LED_pin=255; uint8_t ser_act_meter_num=0; #define SML_SAVAILABLE Serial_available() #define SML_SREAD Serial_read() #define SML_SPEAK Serial_peek() bool Serial_available() { uint8_t num=dump2log&7; if (num<1 || num>meters_used) num=1; if (!meter_ss[num-1]) return 0; return meter_ss[num-1]->available(); } uint8_t Serial_read() { uint8_t num=dump2log&7; if (num<1 || num>meters_used) num=1; if (!meter_ss[num-1]) return 0; return meter_ss[num-1]->read(); } uint8_t Serial_peek() { uint8_t num=dump2log&7; if (num<1 || num>meters_used) num=1; if (!meter_ss[num-1]) return 0; return meter_ss[num-1]->peek(); } #ifndef SML_DUMP_SIZE #define SML_DUMP_SIZE 128 #endif uint16_t sml_logindex; char log_data[SML_DUMP_SIZE]; #define SML_EBUS_SKIP_SYNC_DUMPS void Dump2log(void) { int16_t index = 0, hcnt = 0; uint32_t d_lastms; uint8_t dchars[16]; uint8_t type = meter_desc_p[(dump2log&7) - 1].type; //if (!SML_SAVAILABLE) return; if (dump2log&8) { // combo mode while (SML_SAVAILABLE) { log_data[index] = ':'; index++; log_data[index] = ' '; index++; d_lastms = millis(); while ((millis() - d_lastms) < 40) { if (SML_SAVAILABLE) { uint8_t c = SML_SREAD; sprintf(&log_data[index], "%02x ", c); dchars[hcnt] = c; index += 3; hcnt++; if (hcnt > 15) { // line complete, build asci chars log_data[index] = '='; index++; log_data[index] = '>'; index++; log_data[index] = ' '; index++; for (uint8_t ccnt = 0; ccnt < 16; ccnt++) { if (isprint(dchars[ccnt])) { log_data[index] = dchars[ccnt]; } else { log_data[index] = ' '; } index++; } break; } } } if (index > 0) { log_data[index] = 0; AddLogData(LOG_LEVEL_INFO, log_data); index = 0; hcnt = 0; } } } else { if (type == 'o') { // obis while (SML_SAVAILABLE) { char c = SML_SREAD&0x7f; if (c == '\n' || c == '\r') { if (sml_logindex > 2) { log_data[sml_logindex] = 0; AddLogData(LOG_LEVEL_INFO, log_data); log_data[0] = ':'; log_data[1] = ' '; sml_logindex = 2; } continue; } log_data[sml_logindex] = c; if (sml_logindex < sizeof(log_data) - 2) { sml_logindex++; } } } else if (type == 'v') { // vbus uint8_t c; while (SML_SAVAILABLE) { c = SML_SREAD; if (c == VBUS_SYNC) { log_data[sml_logindex] = 0; AddLogData(LOG_LEVEL_INFO, log_data); log_data[0] = ':'; log_data[1] = ' '; sml_logindex = 2; } sprintf(&log_data[sml_logindex], "%02x ", c); if (sml_logindex < sizeof(log_data) - 7) { sml_logindex += 3; } } } else if (type == 'e') { // ebus uint8_t c, p; while (SML_SAVAILABLE) { c = SML_SREAD; if (c == EBUS_SYNC) { p = SML_SPEAK; if (p != EBUS_SYNC && sml_logindex > 5) { // new packet, plot last one log_data[sml_logindex] = 0; AddLogData(LOG_LEVEL_INFO, log_data); strcpy(&log_data[0], ": aa "); sml_logindex = 5; } continue; } sprintf(&log_data[sml_logindex], "%02x ", c); if (sml_logindex < sizeof(log_data) - 7) { sml_logindex += 3; } } } else if (type == 's') { // sml uint8_t c; while (SML_SAVAILABLE) { c = SML_SREAD; if (c == SML_SYNC) { log_data[sml_logindex] = 0; AddLogData(LOG_LEVEL_INFO, log_data); log_data[0] = ':'; log_data[1] = ' '; sml_logindex = 2; } sprintf(&log_data[sml_logindex], "%02x ", c); if (sml_logindex < sizeof(log_data) - 7) { sml_logindex += 3; } } } else { // raw dump d_lastms = millis(); log_data[0] = ':'; log_data[1] = ' '; sml_logindex = 2; while ((millis() - d_lastms) < 40) { while (SML_SAVAILABLE) { sprintf(&log_data[sml_logindex], "%02x ", SML_SREAD); sml_logindex += 3; } } if (sml_logindex > 2) { log_data[sml_logindex] = 0; AddLogData(LOG_LEVEL_INFO, log_data); } } } } void Hexdump(uint8_t *sbuff, uint32_t slen) { char cbuff[slen*3+10]; char *cp = cbuff; *cp++ = '>'; *cp++ = ' '; for (uint32_t cnt = 0; cnt < slen; cnt ++) { sprintf(cp, "%02x ", sbuff[cnt]); cp += 3; } AddLogData(LOG_LEVEL_INFO, cbuff); } #ifdef ED300L uint8_t sml_status[MAX_METERS]; uint8_t g_mindex; #endif // skip sml entries uint8_t *skip_sml(uint8_t *cp,int16_t *res) { uint8_t len,len1,type; len=*cp&0xf; type=*cp&0x70; if (type==0x70) { // list, skip entries // list cp++; while (len--) { len1=*cp&0x0f; cp+=len1; } *res=0; } else { // skip len *res=(signed char)*(cp+1); cp+=len; } return cp; } // get sml binary value // not defined for unsigned >0x7fff ffff ffff ffff (should never happen) double sml_getvalue(unsigned char *cp,uint8_t index) { uint8_t len,unit,type; int16_t scaler,result; int64_t value; double dval; // scan for values // check status #ifdef ED300L unsigned char *cpx=cp-5; // decode OBIS 0180 amd extract direction info if (*cp==0x64 && *cpx==0 && *(cpx+1)==0x01 && *(cpx+2)==0x08 && *(cpx+3)==0) { sml_status[g_mindex]=*(cp+3); } if (*cp==0x63 && *cpx==0 && *(cpx+1)==0x01 && *(cpx+2)==0x08 && *(cpx+3)==0) { sml_status[g_mindex]=*(cp+2); } #endif cp=skip_sml(cp,&result); // check time cp=skip_sml(cp,&result); // check unit cp=skip_sml(cp,&result); // check scaler cp=skip_sml(cp,&result); scaler=result; // get value type=*cp&0x70; len=*cp&0x0f; cp++; if (type==0x50 || type==0x60) { // shift into 64 bit uint64_t uvalue=0; uint8_t nlen=len; while (--nlen) { uvalue<<=8; uvalue|=*cp++; } if (type==0x50) { // signed switch (len-1) { case 1: // byte value=(signed char)uvalue; break; case 2: // signed 16 bit #ifdef DWS74_BUG if (scaler==-2) { value=(uint32_t)uvalue; } else { value=(int16_t)uvalue; } #else value=(int16_t)uvalue; #endif break; case 3: // signed 24 bit value=(int32_t)(uvalue<<8); value/=256; break; case 4: // signed 32 bit value=(int32_t)uvalue; break; case 5: case 6: case 7: case 8: // signed 64 bit value=(int64_t)uvalue; break; } } else { // unsigned value=uvalue; } } else { if (!(type&0xf0)) { // octet string serial number // no coding found on the net // up to now 2 types identified on Hager if (len==9) { // serial number on hager => 24 bit - 24 bit cp++; uint32_t s1,s2; s1=*cp<<16|*(cp+1)<<8|*(cp+2); cp+=4; s2=*cp<<16|*(cp+1)<<8|*(cp+2); sprintf(&meter_id[index][0],"%u-%u",s1,s2); } else { // server id on hager char *str=&meter_id[index][0]; for (type=0; type= 'A' && chr <= 'F') rVal = chr + 10 - 'A'; } return rVal; } uint8_t sb_counter; // need double precision in this driver double CharToDouble(const char *str) { // simple ascii to double, because atof or strtod are too large char strbuf[24]; strlcpy(strbuf, str, sizeof(strbuf)); char *pt = strbuf; while ((*pt != '\0') && isspace(*pt)) { pt++; } // Trim leading spaces signed char sign = 1; if (*pt == '-') { sign = -1; } if (*pt == '-' || *pt=='+') { pt++; } // Skip any sign double left = 0; if (*pt != '.') { left = atoi(pt); // Get left part while (isdigit(*pt)) { pt++; } // Skip number } double right = 0; if (*pt == '.') { pt++; right = atoi(pt); // Decimal part while (isdigit(*pt)) { pt++; right /= 10.0; } } double result = left + right; if (sign < 0) { return -result; // Add negative sign } return result; } // remove ebus escapes void ebus_esc(uint8_t *ebus_buffer, unsigned char len) { short count,count1; for (count=0; countavailable()) { meter_ss[meters]->read(); } } void sml_shift_in(uint32_t meters,uint32_t shard) { uint32_t count; #ifndef SML_OBIS_LINE if (meter_desc_p[meters].type!='e' && meter_desc_p[meters].type!='m' && meter_desc_p[meters].type!='M' && meter_desc_p[meters].type!='p' && meter_desc_p[meters].type!='R' && meter_desc_p[meters].type!='v') { #else if (meter_desc_p[meters].type!='o' && meter_desc_p[meters].type!='e' && meter_desc_p[meters].type!='m' && meter_desc_p[meters].type!='M' && meter_desc_p[meters].type!='p' && meter_desc_p[meters].type!='R' && meter_desc_p[meters].type!='v') { #endif // shift in for (count=0; countread(); if (meter_desc_p[meters].type == 'o') { #ifndef SML_OBIS_LINE smltbuf[meters][SML_BSIZ-1] = iob & 0x7f; #else iob &= 0x7f; smltbuf[meters][meter_spos[meters]] = iob; meter_spos[meters]++; if (meter_spos[meters] >= SML_BSIZ) { meter_spos[meters] = 0; } if (iob == 0x0a) { SML_Decode(meters); meter_spos[meters] = 0; } #endif } else if (meter_desc_p[meters].type=='s') { smltbuf[meters][SML_BSIZ-1]=iob; } else if (meter_desc_p[meters].type=='r') { smltbuf[meters][SML_BSIZ-1]=iob; } else if (meter_desc_p[meters].type=='m' || meter_desc_p[meters].type=='M') { smltbuf[meters][meter_spos[meters]] = iob; meter_spos[meters]++; if (meter_spos[meters]>=SML_BSIZ) { meter_spos[meters]=0; } if (meter_spos[meters]>=8) { uint32_t mlen=smltbuf[meters][2]+5; if (mlen>SML_BSIZ) mlen=SML_BSIZ; if (meter_spos[meters]>=mlen) { SML_Decode(meters); sml_empty_receiver(meters); meter_spos[meters]=0; } } } else if (meter_desc_p[meters].type=='p') { smltbuf[meters][meter_spos[meters]] = iob; meter_spos[meters]++; if (meter_spos[meters]>=7) { SML_Decode(meters); sml_empty_receiver(meters); meter_spos[meters]=0; } } else if (meter_desc_p[meters].type=='R') { smltbuf[meters][meter_spos[meters]] = iob; meter_spos[meters]++; if (meter_spos[meters]>=SML_BSIZ) { meter_spos[meters]=0; } } else if (meter_desc_p[meters].type=='v') { if (iob==EBUS_SYNC) { sb_counter = 0; SML_Decode(meters); smltbuf[meters][0] = iob; meter_spos[meters] = 1; } else { if (meter_spos[meters] < SML_BSIZ) { smltbuf[meters][meter_spos[meters]] = iob; meter_spos[meters]++; } } } else { if (iob==EBUS_SYNC) { // should be end of telegramm // QQ,ZZ,PB,SB,NN ..... CRC, ACK SYNC if (meter_spos[meters]>4+5) { // get telegramm lenght uint16_t tlen=smltbuf[meters][4]+5; // test crc if (smltbuf[meters][tlen]=ebus_CalculateCRC(smltbuf[meters],tlen)) { ebus_esc(smltbuf[meters],tlen); SML_Decode(meters); } else { // crc error //AddLog(LOG_LEVEL_INFO, PSTR("ebus crc error")); } } meter_spos[meters] = 0; return; } smltbuf[meters][meter_spos[meters]] = iob; meter_spos[meters]++; if (meter_spos[meters]>=SML_BSIZ) { meter_spos[meters]=0; } } sb_counter++; #ifndef SML_OBIS_LINE if (meter_desc_p[meters].type!='e' && meter_desc_p[meters].type!='m' && meter_desc_p[meters].type!='M' && meter_desc_p[meters].type!='p' && meter_desc_p[meters].type!='R' && meter_desc_p[meters].type!='v') SML_Decode(meters); #else if (meter_desc_p[meters].type!='o' && meter_desc_p[meters].type!='e' && meter_desc_p[meters].type!='m' && meter_desc_p[meters].type!='M' && meter_desc_p[meters].type!='p' && meter_desc_p[meters].type!='R' && meter_desc_p[meters].type!='v') SML_Decode(meters); #endif } // polled every 50 ms void SML_Poll(void) { uint32_t meters; for (meters = 0; meters < meters_used; meters++) { if (meter_desc_p[meters].type != 'c') { // poll for serial input if (!meter_ss[meters]) continue; if (ser_act_LED_pin!=255 && (ser_act_meter_num==0 || ser_act_meter_num-1==meters)) { digitalWrite(ser_act_LED_pin, meter_ss[meters]->available() && !digitalRead(ser_act_LED_pin)); // Invert LED, if queue is continuously full } while (meter_ss[meters]->available()) { sml_shift_in(meters, 0); } } } } #define VBUS_BAD_CRC 0 // get vbus septet with 6 bytes uint32_t vbus_get_septet(uint8_t *cp) { uint32_t result = 0; //AddLog(LOG_LEVEL_INFO,PSTR("septet: %02x %02x %02x %02x %02x %02x"),cp[0] ,cp[1],cp[2],cp[3],cp[4],cp[5]); uint8_t Crc = 0x7F; for (uint32_t i = 0; i < 5; i++) { Crc = (Crc - cp[i]) & 0x7f; } if (Crc != cp[5]) { result = VBUS_BAD_CRC; } else { result = (cp[3] | ((cp[4]&8)<<4)); result <<= 8; result |= (cp[2] | ((cp[4]&4)<<5)); result <<= 8; result |= (cp[1] | ((cp[4]&2)<<6)); result <<= 8; result |= (cp[0] | ((cp[4]&1)<<7)); } //AddLog(LOG_LEVEL_INFO,PSTR("septet r: %d"),result); return result; } void SML_Decode(uint8_t index) { const char *mp=(const char*)meter_p; int8_t mindex; uint8_t *cp; uint8_t dindex = 0, vindex = 0; delay(0); while (mp != NULL) { // check list of defines if (*mp == 0) break; // new section mindex = ((*mp) & 7) - 1; if (mindex < 0 || mindex >= meters_used) mindex = 0; mp += 2; if (*mp == '=' && *(mp+1) == 'h') { mp = strchr(mp, '|'); if (mp) mp++; continue; } // =d must handle dindex if (*mp == '=' && *(mp + 1) == 'd') { if (index != mindex) { dindex++; } } if (index!=mindex) goto nextsect; // start of serial source buffer cp = &smltbuf[mindex][0]; // compare if (*mp == '=') { // calculated entry, check syntax mp++; // do math m 1+2+3 if (*mp == 'm' && !sb_counter) { // only every 256 th byte // else it would be calculated every single serial byte mp++; while (*mp == ' ') mp++; // 1. index double dvar; uint8_t opr; uint8_t mind; int32_t ind; mind = strtol((char*)mp, (char**)&mp, 10); if (mind < 1 || mind > SML_MAX_VARS) mind = 1; dvar = meter_vars[mind - 1]; while (*mp==' ') mp++; for (uint8_t p = 0; p < 8; p++) { if (*mp == '@') { // store result meter_vars[vindex] = dvar; mp++; break; } opr = *mp; mp++; uint8_t iflg = 0; if (*mp == '#') { iflg = 1; mp++; } ind = strtol((char*)mp, (char**)&mp, 10); mind = ind; if (mind < 1 || mind > SML_MAX_VARS) mind = 1; switch (opr) { case '+': if (iflg) dvar += ind; else dvar += meter_vars[mind - 1]; break; case '-': if (iflg) dvar -= ind; else dvar -= meter_vars[mind - 1]; break; case '*': if (iflg) dvar *= ind; else dvar *= meter_vars[mind - 1]; break; case '/': if (iflg) dvar /= ind; else dvar /= meter_vars[mind - 1]; break; } while (*mp==' ') mp++; if (*mp == '@') { // store result meter_vars[vindex] = dvar; mp++; break; } } double fac = CharToDouble((char*)mp); meter_vars[vindex] /= fac; SML_Immediate_MQTT((const char*)mp, vindex, mindex); dvalid[vindex] = 1; // get sfac } else if (*mp=='d') { // calc deltas d ind 10 (eg every 10 secs) if (dindex < MAX_DVARS) { // only n indexes mp++; while (*mp == ' ') mp++; uint8_t ind = atoi(mp); while (*mp >= '0' && *mp <= '9') mp++; if (ind < 1 || ind > SML_MAX_VARS) ind = 1; uint32_t delay = atoi(mp) * 1000; uint32_t dtime = millis() - dtimes[dindex]; if (dtime > delay) { // calc difference dtimes[dindex] = millis(); double vdiff = meter_vars[ind - 1] - dvalues[dindex]; dvalues[dindex] = meter_vars[ind - 1]; double dres = (double)360000.0 * vdiff / ((double)dtime / 10000.0); dvalid[vindex] += 1; if (dvalid[vindex] >= 2) { // differece is only valid after 2. calculation dvalid[vindex] = 2; #ifdef USE_SML_MEDIAN_FILTER if (meter_desc_p[mindex].flag & 16) { meter_vars[vindex] = sml_median(&sml_mf[vindex], dres); } else { meter_vars[vindex] = dres; } #else meter_vars[vindex] = dres; #endif } mp=strchr(mp,'@'); if (mp) { mp++; double fac = CharToDouble((char*)mp); meter_vars[vindex] /= fac; SML_Immediate_MQTT((const char*)mp, vindex, mindex); } } //dvalid[vindex] = 1; dindex++; } } else if (*mp == 'h') { // skip html tag line mp = strchr(mp, '|'); if (mp) mp++; continue; } } else { // compare value uint8_t found = 1; double ebus_dval = 99; float mbus_dval = 99; while (*mp != '@') { if (meter_desc_p[mindex].type == 'o' || meter_desc_p[mindex].type == 'c') { if (*mp++ != *cp++) { found=0; } } else { if (meter_desc_p[mindex].type == 's') { // sml uint8_t val = hexnibble(*mp++) << 4; val |= hexnibble(*mp++); if (val != *cp++) { found=0; } } else { // ebus mbus pzem vbus or raw // XXHHHHSSUU if (*mp == 'x') { if (*(mp + 1) == 'x') { //ignore one byte mp += 2; cp++; } else { mp++; if (isdigit(*mp)) { uint8_t skip = strtol((char*)mp, (char**)&mp, 10); cp += skip; } } } else if (!strncmp(mp, "UUuuUUuu", 8)) { uint32_t val = (cp[0]<<24) | (cp[1]<<16) | (cp[2]<<8) | (cp[3]<<0); mp += 8; cp += 4; if (*mp == 's') { mp++; // swap words val = (val>>16) | (val<<16); } ebus_dval = val; mbus_dval = val; } else if (!strncmp(mp, "uuUUuuUU", 8)) { uint32_t val = (cp[1]<<24) | (cp[0]<<16) | (cp[3]<<8) | (cp[2]<<0); mp += 8; cp += 4; if (*mp == 's') { mp++; // swap words val = (val>>16) | (val<<16); } ebus_dval = val; mbus_dval = val; } else if (!strncmp(mp, "UUuu", 4)) { uint16_t val = cp[1] | (cp[0]<<8); mbus_dval = val; ebus_dval = val; mp += 4; cp += 2; } else if (!strncmp(mp, "SSssSSss", 8)) { int32_t val = (cp[0]<<24) | (cp[1]<<16) | (cp[2]<<8) | (cp[3]<<0); mp += 8; cp += 4; if (*mp == 's') { mp++; // swap words val = ((uint32_t)val>>16) | ((uint32_t)val<<16); } ebus_dval = val; mbus_dval = val; } else if (!strncmp(mp, "ssSSssSS", 8)) { int32_t val = (cp[1]<<24) | (cp[0]<<16) | (cp[3]<<8) | (cp[2]<<0); mp += 8; cp += 4; if (*mp == 's') { mp++; // swap words val = ((uint32_t)val>>16) | ((uint32_t)val<<16); } ebus_dval = val; mbus_dval = val; } else if (!strncmp(mp, "uuUU", 4)) { uint16_t val = cp[0] | (cp[1]<<8); mbus_dval = val; ebus_dval = val; mp += 4; cp += 2; } else if (!strncmp(mp, "uu", 2)) { uint8_t val = *cp++; mbus_dval = val; ebus_dval = val; mp += 2; } else if (!strncmp(mp, "ssSS", 4)) { int16_t val = *cp | (*(cp+1)<<8); mbus_dval = val; ebus_dval = val; mp += 4; cp += 2; } else if (!strncmp(mp, "SSss", 4)) { int16_t val = cp[1] | (cp[0]<<8); mbus_dval = val; ebus_dval = val; mp += 4; cp += 2; } else if (!strncmp(mp,"ss", 2)) { int8_t val = *cp++; mbus_dval = val; ebus_dval = val; mp += 2; } else if (!strncmp(mp, "ffffffff", 8)) { uint32_t val = (cp[0]<<24) | (cp[1]<<16) | (cp[2]<<8) | (cp[3]<<0); float *fp = (float*)&val; ebus_dval = *fp; mbus_dval = *fp; mp += 8; cp += 4; } else if (!strncmp(mp, "FFffFFff", 8)) { // reverse word float uint32_t val = (cp[1]<<0) | (cp[0]<<8) | (cp[3]<<16) | (cp[2]<<24); float *fp = (float*)&val; ebus_dval = *fp; mbus_dval = *fp; mp += 8; cp += 4; } else if (!strncmp(mp, "eeeeee", 6)) { uint32_t val = (cp[0]<<16) | (cp[1]<<8) | (cp[2]<<0); mbus_dval = val; mp += 6; cp += 3; } else if (!strncmp(mp, "vvvvvv", 6)) { mbus_dval = (float)((cp[0]<<8) | (cp[1])) + ((float)cp[2]/10.0); mp += 6; cp += 3; } else if (!strncmp(mp, "cccccc", 6)) { mbus_dval = (float)((cp[0]<<8) | (cp[1])) + ((float)cp[2]/100.0); mp += 6; cp += 3; } else if (!strncmp(mp, "pppp", 4)) { mbus_dval = (float)((cp[0]<<8) | cp[1]); mp += 4; cp += 2; } else if (*mp == 'v') { // vbus values vul, vsl, vuwh, vuwl, wswh, vswl, vswh // vub3, vsb3 etc mp++; int16_t offset = -1; if (*mp == 'o') { mp++; offset = strtol((char*)mp, (char**)&mp, 10); cp += (offset / 4) * 6; } uint8_t usign; if (*mp == 'u') { usign = 1; } else if (*mp == 's') { usign = 0; } mp++; switch (*mp) { case 'l': mp++; // get long value if (usign) { ebus_dval = vbus_get_septet(cp); } else { ebus_dval = (int32_t)vbus_get_septet(cp); } break; case 'w': mp++; char wflg; if (offset >= 0) { if (offset % 4) { wflg = 'h'; } else { wflg = 'l'; } } else { wflg = *mp; mp++; } // get word value if (wflg == 'h') { // high word if (usign) ebus_dval = (vbus_get_septet(cp) >> 16) & 0xffff; else ebus_dval = (int16_t)((vbus_get_septet(cp) >> 16) & 0xffff); } else { // low word if (usign) ebus_dval = vbus_get_septet(cp) & 0xffff; else ebus_dval = (int16_t)(vbus_get_septet(cp) & 0xffff); } break; case 'b': mp++; char bflg; if (offset >= 0) { bflg = 0x30 | (offset % 4); } else { bflg = *mp; mp++; } switch (bflg) { case '3': if (usign) ebus_dval = vbus_get_septet(cp) >> 24; else ebus_dval = (int8_t)(vbus_get_septet(cp) >> 24); break; case '2': if (usign) ebus_dval = (vbus_get_septet(cp) >> 16) & 0xff; else ebus_dval = (int8_t)((vbus_get_septet(cp) >> 16) & 0xff); break; case '1': if (usign) ebus_dval = (vbus_get_septet(cp) >> 8) & 0xff; else ebus_dval = (int8_t)((vbus_get_septet(cp) >> 8) & 0xff); break; case '0': if (usign) ebus_dval = vbus_get_septet(cp) & 0xff; else ebus_dval = (int8_t)(vbus_get_septet(cp) & 0xff); break; } break; case 't': mp++; { uint16_t time; if (offset % 4) { time = (vbus_get_septet(cp) >> 16) & 0xffff; } else { time = vbus_get_septet(cp) & 0xffff; } sprintf(&meter_id[mindex][0], "%02d:%02d", time / 60, time % 60); } break; } cp += 6; } else { uint8_t val = hexnibble(*mp++) << 4; val |= hexnibble(*mp++); if (val!=*cp++) { found=0; } } } } } if (found) { // matches, get value dvalid[vindex] = 1; mp++; #ifdef ED300L g_mindex=mindex; #endif if (*mp == '#') { // get string value getstr: mp++; if (meter_desc_p[mindex].type != 'v') { if (meter_desc_p[mindex].type == 'o') { uint32_t p; for (p = 0; p < METER_ID_SIZE - 2; p++) { if (*cp == *mp) { break; } meter_id[mindex][p] = *cp++; } meter_id[mindex][p] = 0; } else { sml_getvalue(cp,mindex); } } } else { double dval; if (meter_desc_p[mindex].type!='e' && meter_desc_p[mindex].type!='r' && meter_desc_p[mindex].type!='m' && meter_desc_p[mindex].type!='M' && meter_desc_p[mindex].type!='p' && meter_desc_p[mindex].type!='v') { // get numeric values if (meter_desc_p[mindex].type=='o' || meter_desc_p[mindex].type=='c') { if (*mp == '(') { mp++; // skip this number of brackets uint8_t toskip = strtol((char*)mp,(char**)&mp, 10); mp++; char *lcp = (char*)cp; if (toskip) { char *bp = (char*)cp; for (uint32_t cnt = 0; cnt < toskip; cnt++) { bp = strchr(bp, '('); if (!bp) { break; } bp++; lcp = bp; } } if (*mp=='#') { cp = (uint8_t*)lcp; goto getstr; } dval=CharToDouble((char*)lcp); } else { dval=CharToDouble((char*)cp); } } else { dval = sml_getvalue(cp,mindex); } } else { // ebus pzem vbus or mbus or raw if (*mp=='b') { mp++; uint8_t shift = *mp&7; ebus_dval = (uint32_t)ebus_dval>>shift; ebus_dval = (uint32_t)ebus_dval&1; mp+=2; } if (*mp=='i') { // mbus index mp++; uint8_t mb_index=strtol((char*)mp,(char**)&mp,10); if (mb_index!=meter_desc_p[mindex].index) { goto nextsect; } uint16_t pos = smltbuf[mindex][2]+3; if (pos>32) pos=32; uint16_t crc = MBUS_calculateCRC(&smltbuf[mindex][0],pos); if (lowByte(crc)!=smltbuf[mindex][pos]) goto nextsect; if (highByte(crc)!=smltbuf[mindex][pos+1]) goto nextsect; dval=mbus_dval; //AddLog(LOG_LEVEL_INFO, PSTR(">> %s"),mp); mp++; } else { if (meter_desc_p[mindex].type=='p') { uint8_t crc = SML_PzemCrc(&smltbuf[mindex][0],6); if (crc!=smltbuf[mindex][6]) goto nextsect; dval=mbus_dval; } else { dval=ebus_dval; } } } #ifdef USE_SML_MEDIAN_FILTER if (meter_desc_p[mindex].flag&16) { meter_vars[vindex]=sml_median(&sml_mf[vindex],dval); } else { meter_vars[vindex]=dval; } #else meter_vars[vindex]=dval; #endif //AddLog(LOG_LEVEL_INFO, PSTR(">> %s"),mp); // get scaling factor double fac = CharToDouble((char*)mp); meter_vars[vindex] /= fac; SML_Immediate_MQTT((const char*)mp, vindex, mindex); } } //AddLog(LOG_LEVEL_INFO, PSTR("set valid in line %d"), vindex); } nextsect: // next section if (vindex=meters_used) lastmind=0; while (mp != NULL) { if (*mp==0) break; // setup sections mindex=((*mp)&7)-1; if (mindex<0 || mindex>=meters_used) mindex=0; if (meter_desc_p[mindex].prefix[0]=='*' && meter_desc_p[mindex].prefix[1]==0) { nojson = 1; } else { nojson = 0; } mp+=2; if (*mp=='=' && *(mp+1)=='h') { mp+=2; // html tag if (json) { mp = strchr(mp, '|'); if (mp) mp++; continue; } // web ui export uint8_t i; for (i=0;i(arg); uint32_t time = millis(); uint32_t debounce_time; if (digitalRead(meter_desc_p[sml_counters[index].sml_cnt_old_state].srcpin) == bitRead(sml_counter_pinstate, index)) { return; } debounce_time = time - sml_counters[index].sml_counter_ltime; if (debounce_time <= sml_counters[index].sml_debounce) return; if bitRead(sml_counter_pinstate, index) { // falling edge RtcSettings.pulse_counter[index]++; sml_counters[index].sml_counter_pulsewidth = time - sml_counters[index].sml_counter_lfalltime; sml_counters[index].sml_counter_lfalltime = time; sml_counters[index].sml_cnt_updated = 1; } sml_counters[index].sml_counter_ltime = time; sml_counter_pinstate ^= (1 << index); } #ifdef USE_SCRIPT struct METER_DESC script_meter_desc[MAX_METERS]; uint8_t *script_meter; #endif #ifndef METER_DEF_SIZE #define METER_DEF_SIZE 3000 #endif #ifdef SML_REPLACE_VARS #ifndef SML_SRCBSIZE #define SML_SRCBSIZE 256 #endif uint32_t SML_getlinelen(char *lp) { uint32_t cnt; for (cnt=0; cnt') break; if (*lp==0) break; } //AddLog(LOG_LEVEL_INFO, PSTR("len=%d"),mlen); return mlen+32; } #else uint32_t SML_getscriptsize(char *lp) { uint32_t mlen=0; for (uint32_t cnt=0;cnt 0)) { return true; } return false; } void SML_Init(void) { meters_used=METERS_USED; meter_desc_p=meter_desc; meter_p=meter; sml_desc_cnt=0; for (uint32_t cnt=0;cntrule_enabled, 0)) { uint8_t meter_script=Run_Scripter(">M",-2,0); if (meter_script==99) { // use script definition if (script_meter) free(script_meter); script_meter = 0; uint8_t *tp = 0; uint16_t index = 0; uint8_t section = 0; int8_t srcpin = 0; uint8_t dec_line = 0; char *lp = glob_script_mem.scriptptr; sml_send_blocks = 0; while (lp) { if (!section) { if (*lp == '>' && *(lp+1) == 'M') { lp += 2; meters_used = strtol(lp, 0, 10); section = 1; uint32_t mlen = SML_getscriptsize(lp); if (mlen == 0) return; // missing end # script_meter = (uint8_t*)calloc(mlen, 1); if (!script_meter) { goto dddef_exit; } tp = script_meter; goto next_line; } } else { if (!*lp || *lp == '#' || *lp == '>') { if (*(tp-1) == '|') *(tp-1) = 0; break; } if (*lp == '+') { // add descriptor +1,1,c,0,10,H20 //toLogEOL(">>",lp); lp++; index = *lp&7; lp += 2; if (index < 1 || index > meters_used) { AddLog(LOG_LEVEL_INFO, PSTR("illegal meter number!")); goto next_line; } index--; srcpin = strtol(lp,&lp,10); if (Gpio_used(abs(srcpin))) { AddLog(LOG_LEVEL_INFO, PSTR("SML: Error: Duplicate GPIO %d defined. Not usable for RX in meter number %d"),abs(srcpin),index+1); dddef_exit: if (script_meter) free(script_meter); script_meter = 0; meters_used = METERS_USED; goto init10; } script_meter_desc[index].srcpin = srcpin; if (*lp != ',') goto next_line; lp++; script_meter_desc[index].type = *lp; lp++; if (*lp != ',') { switch (*lp) { case 'N': lp++; script_meter_desc[index].sopt = 0x10 | (*lp & 3); lp++; break; case 'E': lp++; script_meter_desc[index].sopt = 0x20 | (*lp & 3); lp++; break; case 'O': lp++; script_meter_desc[index].sopt = 0x30 | (*lp & 3); lp++; break; default: script_meter_desc[index].sopt = *lp&7; lp++; } } else { script_meter_desc[index].sopt = 0; } lp++; script_meter_desc[index].flag = strtol(lp, &lp, 10); if (*lp != ',') goto next_line; lp++; script_meter_desc[index].params = strtol(lp, &lp, 10); if (*lp != ',') goto next_line; lp++; script_meter_desc[index].prefix[7] = 0; for (uint32_t cnt = 0; cnt < 8; cnt++) { if (*lp == SCRIPT_EOL || *lp == ',') { script_meter_desc[index].prefix[cnt] = 0; break; } script_meter_desc[index].prefix[cnt] = *lp++; } if (*lp == ',') { lp++; script_meter_desc[index].trxpin = strtol(lp, &lp, 10); if (Gpio_used(script_meter_desc[index].trxpin)) { AddLog(LOG_LEVEL_INFO, PSTR("SML: Error: Duplicate GPIO %d defined. Not usable for TX in meter number %d"),script_meter_desc[index].trxpin,index+1); goto dddef_exit; } if (*lp != ',') goto next_line; lp++; script_meter_desc[index].tsecs = strtol(lp, &lp, 10); if (*lp == ',') { lp++; #if 1 // look ahead uint16_t txlen = 0; uint16_t tx_entries = 1; char *txp = lp; while (*txp) { if (*txp == ',') tx_entries++; if (*txp == SCRIPT_EOL) { if (tx_entries > 1) { if (*(txp - 1) != ',' ) { break; } // line ends with , } else { // single entry break; } } txp++; txlen++; } if (txlen) { script_meter_desc[index].txmem = (char*)calloc(txlen + 2, 1); if (script_meter_desc[index].txmem) { // now copy send blocks char *txp = lp; uint16_t tind = 0; for (uint32_t cnt = 0; cnt < txlen; cnt++) { if (*txp == SCRIPT_EOL) { txp++; } else { script_meter_desc[index].txmem[tind] = *txp++; tind++; } } } //AddLog(LOG_LEVEL_INFO, PSTR(">>> %s - %d"), script_meter_desc[index].txmem, txlen); script_meter_desc[index].index = 0; script_meter_desc[index].max_index = tx_entries; sml_send_blocks++; lp += txlen; } #else char txbuff[SML_SRCBSIZE]; uint32_t txlen = 0, tx_entries = 1; for (uint32_t cnt = 0; cnt < sizeof(txbuff); cnt++) { if (*lp == SCRIPT_EOL && *(lp - 1) != ',' ) { txbuff[cnt] = 0; txlen = cnt; break; } if (*lp == ',') tx_entries++; txbuff[cnt] = *lp++; } if (txlen) { script_meter_desc[index].txmem = (char*)calloc(txlen + 2, 1); if (script_meter_desc[index].txmem) { strcpy(script_meter_desc[index].txmem, txbuff); } script_meter_desc[index].index = 0; script_meter_desc[index].max_index = tx_entries; sml_send_blocks++; } #endif } } if (*lp == SCRIPT_EOL) lp--; goto next_line; } #ifdef SML_REPLACE_VARS char dstbuf[SML_SRCBSIZE*2]; Replace_Cmd_Vars(lp, 1, dstbuf,sizeof(dstbuf)); lp += SML_getlinelen(lp); //AddLog(LOG_LEVEL_INFO, PSTR("%s"),dstbuf); char *lp1 = dstbuf; if (*lp1 == '-' || isdigit(*lp1)) { //toLogEOL(">>",lp); // add meters line -1,1-0:1.8.0*255(@10000,H2OIN,cbm,COUNTER,4| if (*lp1 == '-') lp1++; uint8_t mnum = strtol(lp1, 0, 10); if (mnum < 1 || mnum > meters_used) { AddLog(LOG_LEVEL_INFO, PSTR("illegal meter number!")); goto next_line; } // 1,=h————————————— if (strncmp(lp1 + 1, ",=h", 3)) { dec_line++; if (dec_line >= SML_MAX_VARS) { AddLog(LOG_LEVEL_INFO, PSTR("too many decode lines: %d !"), dec_line); goto next_line; } } while (1) { if (*lp1 == 0) { *tp++ = '|'; goto next_line; } *tp++ = *lp1++; index++; if (index >= METER_DEF_SIZE) break; } } #else if (*lp == '-' || isdigit(*lp)) { //toLogEOL(">>",lp); // add meters line -1,1-0:1.8.0*255(@10000,H2OIN,cbm,COUNTER,4| if (*lp == '-') lp++; uint8_t mnum = strtol(lp,0,10); if (mnum < 1 || mnum > meters_used) { AddLog(LOG_LEVEL_INFO, PSTR("illegal meter number!")); goto next_line; } if (strncmp(lp + 1, ",=h", 3)) { dec_line++; if (dec_line >= SML_MAX_VARS) { AddLog(LOG_LEVEL_INFO, PSTR("too many decode lines: %d !"), dec_line); goto next_line; } } while (1) { if (*lp == SCRIPT_EOL) { if (*(tp-1) != '|') *tp++ = '|'; goto next_line; } *tp++ = *lp++; index++; if (index >= METER_DEF_SIZE) break; } } #endif } next_line: if (*lp==SCRIPT_EOL) { lp++; } else { lp = strchr(lp, SCRIPT_EOL); if (!lp) break; lp++; } } *tp=0; meter_desc_p=script_meter_desc; meter_p=script_meter; } } #endif init10: typedef void (*function)(); uint8_t cindex=0; // preloud counters for (byte i = 0; i < MAX_COUNTERS; i++) { RtcSettings.pulse_counter[i] = Settings->pulse_counter[i]; sml_counters[i].sml_cnt_last_ts = millis(); } uint32_t uart_index = 2; sml_counter_pinstate = 0; for (uint8_t meters = 0; meters < meters_used; meters++) { if (meter_desc_p[meters].type == 'c') { if (meter_desc_p[meters].flag & 2) { // analog mode #ifdef ANALOG_OPTO_SENSOR ADS1115_init(); sml_counters[cindex].ana_max=-32768; sml_counters[cindex].ana_min=+32767; #endif } else { // counters, set to input with pullup if (meter_desc_p[meters].flag&1) { pinMode(meter_desc_p[meters].srcpin,INPUT_PULLUP); } else { pinMode(meter_desc_p[meters].srcpin,INPUT); } // check for irq mode if (meter_desc_p[meters].params<=0) { // init irq mode sml_counters[cindex].sml_cnt_old_state = meters; sml_counters[cindex].sml_debounce = -meter_desc_p[meters].params; attachInterruptArg(meter_desc_p[meters].srcpin, SML_CounterIsr, &sml_cnt_index[cindex], CHANGE); if (digitalRead(meter_desc_p[meters].srcpin) > 0) { sml_counter_pinstate |= (1 << cindex); } sml_counters[cindex].sml_counter_ltime = millis(); } RtcSettings.pulse_counter[cindex] = Settings->pulse_counter[cindex]; InjektCounterValue(meters, RtcSettings.pulse_counter[cindex],0.0); cindex++; } } else { // serial input, init #ifdef SPECIAL_SS if (meter_desc_p[meters].type=='m' || meter_desc_p[meters].type=='M' || meter_desc_p[meters].type=='p' || meter_desc_p[meters].type=='R' || meter_desc_p[meters].type=='v') { meter_ss[meters] = new TasmotaSerial(meter_desc_p[meters].srcpin,meter_desc_p[meters].trxpin,1,0,TMSBSIZ); } else { meter_ss[meters] = new TasmotaSerial(meter_desc_p[meters].srcpin,meter_desc_p[meters].trxpin,1,1,TMSBSIZ); } #else #ifdef ESP8266 meter_ss[meters] = new TasmotaSerial(meter_desc_p[meters].srcpin,meter_desc_p[meters].trxpin,1,0,TMSBSIZ); #endif // ESP8266 #ifdef ESP32 // use hardware serial #ifdef USE_ESP32_SW_SERIAL meter_ss[meters] = new SML_ESP32_SERIAL(uart_index); if (meter_desc_p[meters].srcpin >= 0) { if (uart_index == 0) { ClaimSerial(); } uart_index--; if (uart_index < 0) uart_index = 0; } #else meter_ss[meters] = new HardwareSerial(uart_index); if (uart_index == 0) { ClaimSerial(); } uart_index--; if (uart_index < 0) uart_index = 0; meter_ss[meters]->setRxBufferSize(TMSBSIZ); #endif // USE_ESP32_SW_SERIAL #endif // ESP32 #endif // SPECIAL_SS SerialConfig smode = SERIAL_8N1; if (meter_desc_p[meters].sopt & 0xf0) { // new serial config switch (meter_desc_p[meters].sopt >> 4) { case 1: if ((meter_desc_p[meters].sopt & 1) == 1) smode = SERIAL_8N1; else smode = SERIAL_8N2; break; case 2: if ((meter_desc_p[meters].sopt & 1) == 1) smode = SERIAL_8E1; else smode = SERIAL_8E2; break; case 3: if ((meter_desc_p[meters].sopt & 1) == 1) smode = SERIAL_8O1; else smode = SERIAL_8O2; break; } } else { // depecated serial config if (meter_desc_p[meters].sopt == 2) { smode = SERIAL_8N2; } if (meter_desc_p[meters].type=='M') { smode = SERIAL_8E1; if (meter_desc_p[meters].sopt == 2) { smode = SERIAL_8E2; } } } #ifdef ESP8266 if (meter_ss[meters]->begin(meter_desc_p[meters].params)) { meter_ss[meters]->flush(); } if (meter_ss[meters]->hardwareSerial()) { Serial.begin(meter_desc_p[meters].params, smode); ClaimSerial(); //Serial.setRxBufferSize(512); } #endif // ESP8266 #ifdef ESP32 meter_ss[meters]->begin(meter_desc_p[meters].params, smode, meter_desc_p[meters].srcpin, meter_desc_p[meters].trxpin); //meter_ss[meters]->setRxBufferSize(TMSBSIZ); #endif // ESP32 } } } #ifdef USE_SML_SCRIPT_CMD uint32_t sml_getv(uint32_t sel) { if (!sel) { for (uint8_t cnt = 0; cnt < SML_MAX_VARS; cnt++) { dvalid[cnt] = 0; } sel = 0; } else { if (sel < 1) sel = 1; sel = dvalid[sel - 1]; } return sel; } uint32_t SML_SetBaud(uint32_t meter, uint32_t br) { if (meter < 1 || meter > meters_used) return 0; meter--; if (!meter_ss[meter]) return 0; #ifdef ESP8266 if (meter_ss[meter]->begin(br)) { meter_ss[meter]->flush(); } if (meter_ss[meter]->hardwareSerial()) { if (meter_desc_p[meter].type=='M') { Serial.begin(br, SERIAL_8E1); } } #endif // ESP8266 #ifdef ESP32 meter_ss[meter]->flush(); meter_ss[meter]->updateBaudRate(br); /* if (meter_desc_p[meter].type=='M') { meter_ss[meter]->begin(br,SERIAL_8E1,meter_desc_p[meter].srcpin,meter_desc_p[meter].trxpin); } else { meter_ss[meter]->begin(br,SERIAL_8N1,meter_desc_p[meter].srcpin,meter_desc_p[meter].trxpin); }*/ #endif // ESP32 return 1; } uint32_t SML_Status(uint32_t meter) { if (meter<1 || meter>meters_used) return 0; meter--; #ifdef ED300L return sml_status[meter]; #else return 0; #endif } uint32_t SML_Write(uint32_t meter,char *hstr) { if (meter<1 || meter>meters_used) return 0; meter--; if (!meter_ss[meter]) return 0; SML_Send_Seq(meter,hstr); return 1; } uint32_t SML_Read(int32_t meter,char *str, uint32_t slen) { uint8_t hflg=0; if (meter<0) { meter=abs(meter); hflg=1; } if (meter<1 || meter>meters_used) return 0; meter--; if (!meter_ss[meter]) return 0; if (!meter_spos[meter]) { return 0; } smltbuf[meter][meter_spos[meter]]=0; if (!hflg) { strlcpy(str,(char*)&smltbuf[meter][0],slen); } else { uint32_t index=0; for (uint32_t cnt=0; cnt=slen-2) break; } } meter_spos[meter]=0; return 1; } float SML_GetVal(uint32_t index) { if (index < 1 || index > SML_MAX_VARS) { index = 1;} return meter_vars[index-1]; } char *SML_GetSVal(uint32_t index) { if (index < 1 || index > MAX_METERS) { index = 1;} return &meter_id[index - 1][0]; } int32_t SML_Set_WStr(uint32_t meter, char *hstr) { if (meter < 1 || meter > meters_used) return -1; meter--; if (!meter_ss[meter]) return -2; script_meter_desc[meter].script_str = hstr; return 0; } #endif // USE_SML_SCRIPT_CMD void SetDBGLed(uint8_t srcpin, uint8_t ledpin) { pinMode(ledpin, OUTPUT); if (digitalRead(srcpin)) { digitalWrite(ledpin,LOW); } else { digitalWrite(ledpin,HIGH); } } // fast counter polling void SML_Counter_Poll(void) { uint16_t meters,cindex=0; uint32_t ctime=millis(); for (meters=0; meters0) { if (ctime-sml_counters[cindex].sml_cnt_last_ts>meter_desc_p[meters].params) { sml_counters[cindex].sml_cnt_last_ts=ctime; if (meter_desc_p[meters].flag&2) { // analog mode, get next value #ifdef ANALOG_OPTO_SENSOR if (ads1115_up) { int16_t val = adc.read_sample(); if (val>sml_counters[cindex].ana_max) sml_counters[cindex].ana_max=val; if (val10) { sml_counters[cindex].sml_cnt_last_ts=ctime; #ifdef DEBUG_CNT_LED1 if (cindex==0) SetDBGLed(meter_desc_p[meters].srcpin,DEBUG_CNT_LED1); #endif #ifdef DEBUG_CNT_LED2 if (cindex==1) SetDBGLed(meter_desc_p[meters].srcpin,DEBUG_CNT_LED2); #endif } if (sml_counters[cindex].sml_cnt_updated) { InjektCounterValue(sml_counters[cindex].sml_cnt_old_state,RtcSettings.pulse_counter[cindex],60000.0 / (float)sml_counters[cindex].sml_counter_pulsewidth); sml_counters[cindex].sml_cnt_updated=0; } } cindex++; } } } #ifdef USE_SCRIPT char *SML_Get_Sequence(char *cp,uint32_t index) { if (!index) return cp; uint32_t cindex=0; while (cp) { cp=strchr(cp,','); if (cp) { cp++; cindex++; if (cindex==index) { return cp; } } } return cp; } void SML_Check_Send(void) { sml_100ms_cnt++; char *cp; for (uint32_t cnt = sml_desc_cnt; cnt < meters_used; cnt++) { if (script_meter_desc[cnt].trxpin >= 0 && script_meter_desc[cnt].txmem) { //AddLog(LOG_LEVEL_INFO, PSTR("100 ms>> %d - %s - %d"),sml_desc_cnt,script_meter_desc[cnt].txmem,script_meter_desc[cnt].tsecs); if ((sml_100ms_cnt >= script_meter_desc[cnt].tsecs)) { sml_100ms_cnt = 0; // check for scriptsync extra output if (script_meter_desc[cnt].script_str) { cp = script_meter_desc[cnt].script_str; script_meter_desc[cnt].script_str = 0; } else { //AddLog(LOG_LEVEL_INFO, PSTR("100 ms>> 2"),cp); if (script_meter_desc[cnt].max_index>1) { script_meter_desc[cnt].index++; if (script_meter_desc[cnt].index >= script_meter_desc[cnt].max_index) { script_meter_desc[cnt].index = 0; sml_desc_cnt++; } cp=SML_Get_Sequence(script_meter_desc[cnt].txmem,script_meter_desc[cnt].index); //SML_Send_Seq(cnt,cp); } else { cp = script_meter_desc[cnt].txmem; //SML_Send_Seq(cnt,cp); sml_desc_cnt++; } } //AddLog(LOG_LEVEL_INFO, PSTR(">> %s"),cp); SML_Send_Seq(cnt,cp); if (sml_desc_cnt >= meters_used) { sml_desc_cnt = 0; } break; } } else { sml_desc_cnt++; } if (sml_desc_cnt >= meters_used) { sml_desc_cnt = 0; } } } uint8_t sml_hexnibble(char chr) { uint8_t rVal = 0; if (isdigit(chr)) { rVal = chr - '0'; } else { if (chr >= 'A' && chr <= 'F') rVal = chr + 10 - 'A'; if (chr >= 'a' && chr <= 'f') rVal = chr + 10 - 'a'; } return rVal; } // send sequence every N Seconds void SML_Send_Seq(uint32_t meter,char *seq) { uint8_t sbuff[48]; uint8_t *ucp = sbuff, slen = 0; char *cp = seq; uint8_t rflg = 0; if (*cp == 'r') { rflg = 1; cp++; } while (*cp) { if (!*cp || !*(cp+1)) break; if (*cp == ',') break; uint8_t iob = (sml_hexnibble(*cp) << 4) | sml_hexnibble(*(cp + 1)); cp += 2; *ucp++ = iob; slen++; if (slen >= sizeof(sbuff)-6) break; // leave space for checksum } if (script_meter_desc[meter].type == 'm' || script_meter_desc[meter].type == 'M') { if (!rflg) { *ucp++ = 0; *ucp++ = 2; slen += 2; } // append crc uint16_t crc = MBUS_calculateCRC(sbuff, slen); *ucp++ = lowByte(crc); *ucp++ = highByte(crc); slen += 2; } if (script_meter_desc[meter].type == 'o') { for (uint32_t cnt = 0; cnt < slen; cnt++) { sbuff[cnt] |= (CalcEvenParity(sbuff[cnt]) << 7); } } if (script_meter_desc[meter].type == 'p') { *ucp++ = 0xc0; *ucp++ = 0xa8; *ucp++ = 1; *ucp++ = 1; *ucp++ = 0; *ucp++ = SML_PzemCrc(sbuff, 6); slen += 6; } meter_ss[meter]->write(sbuff, slen); if (dump2log) { #ifdef SML_DUMP_OUT_ALL Hexdump(sbuff, slen); #else uint8_t type = meter_desc_p[(dump2log&7) - 1].type; if (type == 'm' || type == 'M') { Hexdump(sbuff, slen); } #endif } } #endif // USE_SCRIPT uint16_t MBUS_calculateCRC(uint8_t *frame, uint8_t num) { uint16_t crc, flag; crc = 0xFFFF; for (uint32_t i = 0; i < num; i++) { crc ^= frame[i]; for (uint32_t j = 8; j; j--) { if ((crc & 0x0001) != 0) { // If the LSB is set crc >>= 1; // Shift right and XOR 0xA001 crc ^= 0xA001; } else { // Else LSB is not set crc >>= 1; // Just shift right } } } return crc; } uint8_t SML_PzemCrc(uint8_t *data, uint8_t len) { uint16_t crc = 0; for (uint32_t i = 0; i < len; i++) crc += *data++; return (uint8_t)(crc & 0xFF); } // for odd parity init with 1 uint8_t CalcEvenParity(uint8_t data) { uint8_t parity=0; while(data) { parity^=(data &1); data>>=1; } return parity; } // dump to log shows serial data on console // has to be off for normal use // in console sensor53 d1, d2, d3 ... or d0 for normal use // set counter => sensor53 c1 xxxx // restart driver => sensor53 r // meter number for monitoring serial activity => sensor53 m1, m2, m3 ... or m0 for all (default) // LED-GPIO for monitoring serial activity => sensor53 l2, l13, l15 ... or l255 for turn off (default) bool XSNS_53_cmd(void) { bool serviced = true; if (XdrvMailbox.data_len > 0) { char *cp=XdrvMailbox.data; if (*cp=='d') { // set dump mode cp++; uint8_t index=atoi(cp); if ((index&7)>meters_used) index=1; if (index>0 && meter_desc_p[(index&7)-1].type=='c') { index=0; } dump2log=index; ResponseTime_P(PSTR(",\"SML\":{\"CMD\":\"dump: %d\"}}"),dump2log); } else if (*cp=='c') { // set counter cp++; uint8_t index=*cp&7; if (index<1 || index>MAX_COUNTERS) index=1; cp++; while (*cp==' ') cp++; if (isdigit(*cp)) { uint32_t cval=atoi(cp); while (isdigit(*cp)) cp++; RtcSettings.pulse_counter[index-1]=cval; uint8_t cindex=0; for (uint8_t meters=0; meterspulse_counter[i] = RtcSettings.pulse_counter[i]; } } /*********************************************************************************************\ * Interface \*********************************************************************************************/ bool Xsns53(byte function) { bool result = false; switch (function) { case FUNC_INIT: SML_Init(); break; case FUNC_LOOP: SML_Counter_Poll(); if (dump2log) Dump2log(); else { SML_Poll(); } break; // case FUNC_EVERY_50_MSECOND: // if (dump2log) Dump2log(); // else SML_Poll(); // break; #ifdef USE_SCRIPT case FUNC_EVERY_100_MSECOND: if (bitRead(Settings->rule_enabled, 0)) { SML_Check_Send(); } break; #endif // USE_SCRIPT case FUNC_JSON_APPEND: if (sml_json_enable) { SML_Show(1); } break; #ifdef USE_WEBSERVER case FUNC_WEB_SENSOR: SML_Show(0); break; #endif // USE_WEBSERVER case FUNC_COMMAND_SENSOR: if (XSNS_53 == XdrvMailbox.index) { result = XSNS_53_cmd(); } break; case FUNC_SAVE_BEFORE_RESTART: case FUNC_SAVE_AT_MIDNIGHT: SML_CounterSaveState(); break; } return result; } #endif // USE_SML