Tasmota/tasmota/xnrg_15_teleinfo.ino

1058 lines
40 KiB
C++
Executable File

/*
xnrg_15_Teleinfo.ino - Teleinfo support for Tasmota
Copyright (C) 2021 Charles-Henri Hallard
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifdef USE_ENERGY_SENSOR
#ifdef USE_TELEINFO
/*********************************************************************************************\
* Teleinfo : French energy provider metering telemety data
* Source: http://hallard.me/category/tinfo/
*
* Denky ESP32 Teleinfo Template
* {"NAME":"Denky (Teleinfo)","GPIO":[1,1,1,1,5664,1,1,1,1,1,1,1,1,1,1,1,0,1,1,1,0,1376,1,1,0,0,0,0,1,5632,1,1,1,0,0,1],"FLAG":0,"BASE":1}
* Denky D4 ESP Pico V3 Teleinfo Template
* {"NAME":"DenkyD4","GPIO":[32,0,0,0,1,0,0,0,0,1,0,1,0,0,0,0,0,640,608,0,0,450,449,448,0,0,0,0,0,0,0,0,0,0,0,0],"FLAG":0,"BASE":1}
*
* Denky (aka WifInfo) ESP8266 Teleinfo Template
* {"NAME":"WifInfo v1.0a","GPIO":[17,255,255,255,6,5,255,255,7,210,255,255,255],"FLAG":15,"BASE":18}
* {"NAME":"WifInfo","GPIO":[7,255,255,210,6,5,255,255,255,255,255,255,255],"FLAG":15,"BASE":18}
*
\*********************************************************************************************/
#define XNRG_15 15
#include "LibTeleinfo.h"
#include <TasmotaSerial.h>
#define TINFO_READ_TIMEOUT 400
#define D_NAME_TELEINFO "Teleinfo"
// Json Command
//const char S_JSON_TELEINFO_COMMAND_STRING[] PROGMEM = "{\"" D_NAME_TELEINFO "\":{\"%s\":%s}}";
//const char S_JSON_TELEINFO_COMMAND_NVALUE[] PROGMEM = "{\"" D_NAME_TELEINFO "\":{\"%s\":%d}}";
const char TELEINFO_COMMAND_SETTINGS[] PROGMEM = "TIC: Settings Mode:%s, Raw:%s, Skip:%d, Limit:%d";
#define MAX_TINFO_COMMAND_NAME 16+1 // Change this if one of the following kTInfo_Commands is higher then 16 char
const char kTInfo_Commands[] PROGMEM = "historique|standard|noraw|full|changed|skip|limit";
enum TInfoCommands { // commands for Console
CMND_TELEINFO_HISTORIQUE=0, // Set Legacy mode
CMND_TELEINFO_STANDARD, // Set Standard Mode
CMND_TELEINFO_RAW_DISABLE, // Disable Raw frame sending
CMND_TELEINFO_RAW_FULL, // Enable all RAW frame send
CMND_TELEINFO_RAW_CHANGE, // Enable only changed values RAW frame send
CMND_TELEINFO_SKIP, // Set number of frame to skip when raw mode is enabled
CMND_TELEINFO_LIMIT // Limit RAW frame to values subject to fast change (Power, Current, ...), TBD
};
// All contract type for legacy, standard mode has in clear text
enum TInfoContrat{
CONTRAT_BAS = 1, // BASE => Option Base.
CONTRAT_HC, // HC.. => Option Heures Creuses.
CONTRAT_EJP, // EJP. => Option EJP.
CONTRAT_BBR, // BBRx => Option Tempo
CONTRAT_END
};
// contract displayed name for legacy, standard mode has in clear text
const char kContratName[] PROGMEM =
"|Base|Heures Creuses|EJP|Bleu Blanc Rouge"
;
// Received current contract value for legacy, standard mode has in clear text
const char kContratValue[] PROGMEM =
"|BASE|HC..|EJP.|BBR"
;
// all tariff type for legacy, standard mode has in clear text
enum TInfoTarif{
TARIF_TH = 1,
TARIF_HC, TARIF_HP,
TARIF_HN, TARIF_PM,
TARIF_CB, TARIF_CW, TARIF_CR,
TARIF_PB, TARIF_PW, TARIF_PR,
TARIF_END
};
// Legacy mode Received current tariff values
const char kTarifValue[] PROGMEM =
"|TH..|HC..|HP.."
"|HN..|PM.."
"|HCJB|HCJW|HCJR"
"|HPJB|HPJW|HPJR"
;
// legacy mode tariff displayed name
const char kTarifName[] PROGMEM =
"|Toutes|Creuses|Pleines"
"|Normales|Pointe Mobile"
"|Creuses Bleu|Creuses Blanc|Creuse Rouges"
"|Pleines Bleu|Pleines Blanc|Pleines Rouges"
;
// contract name for standard mode
#define TELEINFO_STD_CONTRACT_BASE PSTR("BASE")
#define TELEINFO_STD_CONTRACT_HCHP PSTR("H CREUSE/PLEINE")
// tariff values for standard mode
#define TELEINFO_STD_TARIFF_BASE PSTR("BASE")
#define TELEINFO_STD_TARIFF_HC PSTR("HEURE CREUSE")
#define TELEINFO_STD_TARIFF_HP PSTR("HEURE PLEINE")
// Label used to do some post processing and/or calculation
enum TInfoLabel{
LABEL_BASE = 1,
LABEL_ADCO, LABEL_ADSC,
LABEL_HCHC, LABEL_HCHP, LABEL_EAST, LABEL_EASF01, LABEL_EASF02,
LABEL_OPTARIF, LABEL_NGTF, LABEL_ISOUSC, LABEL_PREF, LABEL_PTEC, LABEL_LTARF, LABEL_NTARF,
LABEL_PAPP, LABEL_SINSTS, LABEL_IINST, LABEL_IINST1, LABEL_IINST2, LABEL_IINST3, LABEL_IRMS1, LABEL_IRMS2, LABEL_IRMS3,
LABEL_TENSION, LABEL_URMS1, LABEL_URMS2, LABEL_URMS3,
LABEL_IMAX, LABEL_IMAX1, LABEL_IMAX2, LABEL_IMAX3, LABEL_PMAX, LABEL_SMAXSN,
LABEL_DEMAIN,
LABEL_END
};
const char kLabel[] PROGMEM =
"|BASE|ADCO|ADSC"
"|HCHC|HCHP|EAST|EASF01|EASF02"
"|OPTARIF|NGTF|ISOUSC|PREF|PTEC|LTARF|NTARF"
"|PAPP|SINSTS|IINST|IINST1|IINST2|IINST3|IRMS1|IRMS2|IRMS3"
"|TENSION|URMS1|URMS2|URMS3"
"|IMAX|IMAX1|IMAX2|IMAX3|PMAX|SMAXSN"
"|DEMAIN"
;
// Blacklisted label from telemetry
// Each label shoud be enclosed by pipe
const char kLabelBlacklist[]
// declared as progmem for ESP8266 just crash and reset on strstr()
#ifndef ESP8266
PROGMEM
#endif
=
"|PJOURF+1"
"|MSG1"
"|"
;
#define TELEINFO_SERIAL_BUFFER_STANDARD 512 // Receive buffer size for Standard mode
#define TELEINFO_SERIAL_BUFFER_HISTORIQUE 512 // Receive buffer size for Legacy mode
#define TELEINFO_PROCESS_BUFFER 32 // Local processing buffer
TInfo tinfo; // Teleinfo object
TasmotaSerial *TInfoSerial = nullptr;
_Mode_e tinfo_mode = TINFO_MODE_HISTORIQUE;
uint8_t tic_rx_pin = NOT_A_PIN;
char serialNumber[13] = ""; // Serial number is 12 char long
bool tinfo_found = false;
int serial_buffer_size;
int contrat;
int tarif;
int isousc;
int raw_skip;
/*********************************************************************************************/
/* ======================================================================
Function: getValueFromLabelIndex
Purpose : return label value from label index
Input : label index to search for
Output : value filled
Comments: -
====================================================================== */
char * getValueFromLabelIndex(int labelIndex, char * value)
{
char labelName[16];
// Get the label name
GetTextIndexed(labelName, sizeof(labelName), labelIndex, kLabel);
// Get value of label name
return tinfo.valueGet(labelName, value) ;
}
/* ======================================================================
Function: ADPSCallback
Purpose : called by library when we detected a ADPS on any phased
Input : phase number
0 for ADPS (monophase)
1 for ADIR1 triphase
2 for ADIR2 triphase
3 for ADIR3 triphase
label (different on Normal, 3 phases, historique or standard)
Output : -
Comments: should have been initialised with a
tinfo.attachADPSCallback(ADPSCallback())
====================================================================== */
void ADPSCallback(uint8_t phase, char * label)
{
// n = phase number 1 to 3
if (phase == 0){
phase = 1;
}
Response_P(PSTR("{\"TIC\":{\"%s\":%i}}"), label, phase );
// Publish adding ADCO serial number into the topic
MqttPublishPrefixTopicRulesProcess_P(TELE, PSTR(D_RSLT_SENSOR), false);
AddLog(LOG_LEVEL_INFO, PSTR("ADPS on phase %d"), phase);
}
/* ======================================================================
Function: DataCallback
Purpose : callback when we detected new or modified data received
Input : linked list pointer on the concerned data
current flags value
Output : -
Comments: -
====================================================================== */
void DataCallback(struct _ValueList * me, uint8_t flags)
{
char c = ' ';
int ilabel ;
char labelName[17];
// Find the label index
for ( ilabel = 1 ; ilabel < LABEL_END ; ilabel++) {
GetTextIndexed(labelName, sizeof(labelName), ilabel, kLabel);
if (!strcmp(labelName, me->name)) {
break;
}
}
// We found valid label
if (ilabel<LABEL_END) {
// First values that needs to have energy object updated (in all case)
// Voltage V (not present on all Smart Meter)
if ( ilabel == LABEL_TENSION || ilabel == LABEL_URMS1 || ilabel == LABEL_URMS2 || ilabel == LABEL_URMS3)
{
Energy.voltage_available = true;
float volt = (float) atoi(me->value);
AddLog(LOG_LEVEL_DEBUG, PSTR("TIC: Voltage %s=%s, now %d"), me->name, me->value, (int) volt);
if ( ilabel == LABEL_URMS2) {
Energy.voltage[1] = volt;
} else if ( ilabel == LABEL_URMS3) {
Energy.voltage[2] = volt;
} else {
Energy.voltage[0] = volt;
}
}
// Current I phase 1 to 3
else if (ilabel == LABEL_IINST
|| ilabel == LABEL_IINST1 || ilabel == LABEL_IRMS1
|| ilabel == LABEL_IINST2 || ilabel == LABEL_IRMS2
|| ilabel == LABEL_IINST3 || ilabel == LABEL_IRMS3 )
{
Energy.current_available = true;
float current = (float) atoi(me->value);
AddLog(LOG_LEVEL_DEBUG, PSTR("TIC: Current %s=%s, now %d"), me->name, me->value, (int) current);
if (ilabel == LABEL_IINST2 || ilabel == LABEL_IRMS2) {
Energy.current[1] = current;
} else if (ilabel == LABEL_IINST3 || ilabel == LABEL_IRMS3) {
Energy.phase_count = 3;
Energy.current[2] = current;
} else {
Energy.current[0] = current;
}
}
// Power P
else if (ilabel == LABEL_PAPP || ilabel == LABEL_SINSTS)
{
Energy.active_power[0] = (float) atoi(me->value);;
AddLog(LOG_LEVEL_DEBUG, PSTR("TIC: Power %s, now %d"), me->value, (int) Energy.active_power[0]);
}
// Ok now not so real time values Does this value is new or changed?
else if (flags & (TINFO_FLAGS_ADDED | TINFO_FLAGS_UPDATED) ) {
if (flags & TINFO_FLAGS_ADDED) { c = '#'; }
if (flags & TINFO_FLAGS_UPDATED) { c = '*'; }
AddLog(LOG_LEVEL_DEBUG, PSTR("TIC: [%d]%c %s=%s"), ilabel, c , me->name, me->value);
// Current tariff (legacy)
if (ilabel == LABEL_PTEC)
{
char tarif_value[] = " "; // 4 spaces
// Find the tariff index
for (tarif = TARIF_TH ; tarif < TARIF_END ; tarif++) {
GetTextIndexed(tarif_value, sizeof(tarif_value), tarif-1, kTarifValue);
if (!strcmp(tarif_value, me->value)) {
break;
}
}
AddLog(LOG_LEVEL_DEBUG, PSTR("TIC: Tariff changed, now '%s' (%d)"), me->value, tarif);
}
// Current tariff (standard)
else if (ilabel == LABEL_LTARF)
{
if (!strcmp_P(me->value, TELEINFO_STD_TARIFF_BASE)) {
tarif = TARIF_TH;
} else if (!strcmp_P(me->value, TELEINFO_STD_TARIFF_HC)) {
tarif = TARIF_HC;
} else if (!strcmp_P(me->value, TELEINFO_STD_TARIFF_HP)) {
tarif = TARIF_HP;
}
AddLog(LOG_LEVEL_DEBUG, PSTR("TIC: Tariff name changed, now '%s'"), me->value);
}
// Current tariff index (standard)
// This is the index on pointer counter (not used just for information)
else if (ilabel == LABEL_NTARF)
{
int index = atoi(me->value);
AddLog(LOG_LEVEL_DEBUG, PSTR("TIC: Tariff index changed, now '%d'"), index);
}
// Wh indexes (legacy)
else if ( ilabel == LABEL_HCHC || ilabel == LABEL_HCHP || ilabel == LABEL_BASE)
{
char value[32];
uint32_t hc = 0;
uint32_t hp = 0;
uint32_t total = 0;
// Base, un seul index
if (ilabel == LABEL_BASE) {
total = atoi(me->value);
AddLog(LOG_LEVEL_DEBUG, PSTR("TIC: Base:%u"), total);
// Heures creuses/pleines calculer total
} else {
// Heures creuses get heures pleines
if (ilabel == LABEL_HCHC) {
hc = atoi(me->value);
if ( getValueFromLabelIndex(LABEL_HCHP, value) ) {
hp = atoi(value);
}
// Heures pleines, get heures creuses
} else if (ilabel == LABEL_HCHP) {
hp = atoi(me->value);
if ( getValueFromLabelIndex(LABEL_HCHC, value) ) {
hc = atoi(value);
}
}
total = hc + hp;
AddLog(LOG_LEVEL_DEBUG, PSTR("TIC: HC:%u HP:%u Total:%u"), hc, hp, total);
}
EnergyUpdateTotal(total/1000.0f, true);
}
// Wh total index (standard)
else if ( ilabel == LABEL_EAST)
{
uint32_t total = atoi(me->value);
if (contrat != CONTRAT_BAS) {
EnergyUpdateTotal(total/1000.0f, true);
AddLog(LOG_LEVEL_DEBUG, PSTR("TIC: Total:%uWh"), total);
}
}
// Wh indexes (standard)
else if ( ilabel == LABEL_EASF01)
{
if (contrat == CONTRAT_BAS) {
EnergyUpdateTotal(atoi(me->value)/1000.0f, true);
}
AddLog(LOG_LEVEL_DEBUG, PSTR("TIC: HC:%u"), atoi(me->value));
}
else if ( ilabel == LABEL_EASF02)
{
AddLog(LOG_LEVEL_DEBUG, PSTR("TIC: HP:%u"), atoi(me->value));
}
// Contract subscribed (legacy)
else if (ilabel == LABEL_OPTARIF)
{
char contrat_value[] = " "; // 4 spaces
// Find the contract index
for (contrat = CONTRAT_BAS ; contrat < CONTRAT_END ; contrat++) {
GetTextIndexed(contrat_value, sizeof(contrat_value), contrat, kContratValue);
if (!strcmp(contrat_value, me->value)) {
break;
}
}
AddLog(LOG_LEVEL_DEBUG, PSTR("TIC: Contract changed, now '%s' (%d)"), me->value, contrat);
}
// Contract subscribed (standard is in clear text in value)
else if (ilabel == LABEL_NGTF)
{
if (!strcmp_P(me->value, TELEINFO_STD_CONTRACT_BASE)) {
contrat = CONTRAT_BAS;
} else if (!strcmp_P(me->value, TELEINFO_STD_CONTRACT_HCHP)) {
contrat = CONTRAT_HC;
}
AddLog(LOG_LEVEL_DEBUG, PSTR("TIC: Contract changed, now '%s'"), me->value);
}
// Contract subscribed (Power)
else if (ilabel == LABEL_ISOUSC || ilabel == LABEL_PREF)
{
isousc = atoi( me->value);
AddLog(LOG_LEVEL_DEBUG, PSTR("TIC: ISousc set to %d"), isousc);
}
// Serial Number of device
else if (ilabel == LABEL_ADCO || ilabel == LABEL_ADSC)
{
strcpy(serialNumber, me->value);
AddLog(LOG_LEVEL_DEBUG, PSTR("TIC: %s set to %s"), me->name, serialNumber);
}
}
}
}
/* ======================================================================
Function: isBlacklistedLabel
Purpose : check is a label is blacklisted for telemetry data
Input : label name
Output : true if blacklisted
Comments: -
====================================================================== */
bool isBlacklistedLabel(char * name)
{
bool bl = false;
// return strstr( kLabelBlacklist, name)==nullptr ? false : true;
if ( strstr(kLabelBlacklist, name) ) {
//if ( strstr("|PJOURF+1|MSG1|ADCO|", name) ) {
bl = true;
AddLog(LOG_LEVEL_DEBUG, PSTR("TIC: %s is blacklisted"), name);
}
return bl;
}
/* ======================================================================
Function: responseDumpTInfo
Purpose : add teleinfo values into JSON response
Input : 1st separator space if begining of JSON, else comma
: select if append all data or just changed one
Output : false if asked for changed value and none has changed else true
Comments: -
====================================================================== */
bool ResponseAppendTInfo(char sep, bool all)
{
struct _ValueList * me = tinfo.getList();
char * p ;
bool isNumber ;
bool hasValue = false;
// Loop thru all the teleinfo frame but
// always check we don't buffer overflow of MQTT data
while (me->next) {
// go to next node
me = me->next;
if (me->name && me->value && *me->name && *me->value) {
// Does this label blacklisted ?
if (!isBlacklistedLabel(me->name)) {
// Add values only if we want all data or if data has changed
if (all || ( Settings.teleinfo.raw_report_changed && (me->flags & (TINFO_FLAGS_UPDATED | TINFO_FLAGS_ADDED | TINFO_FLAGS_ALERT) ) ) ) {
isNumber = true;
hasValue = true;
p = me->value;
// Specific treatment serial number don't convert to number later
if (strcmp(me->name, "ADCO")==0 || strcmp(me->name, "ADSC")==0) {
isNumber = false;
} else {
// check if value is number
while (*p && isNumber) {
if ( *p < '0' || *p > '9' ) {
isNumber = false;
}
p++;
}
}
// Avoid unneeded space
if (sep == ' ') {
ResponseAppend_P( PSTR("\"%s\":"), me->name );
} else {
ResponseAppend_P( PSTR("%c\"%s\":"), sep, me->name );
}
if (!isNumber) {
ResponseAppend_P( PSTR("\"%s\""), me->value );
} else {
ResponseAppend_P( PSTR("%d"), atoi(me->value));
}
// Now JSON separator is needed
sep =',';
}
}
}
}
return hasValue;
}
/* ======================================================================
Function: NewFrameCallback
Purpose : callback when we received a complete Teleinfo frama
Input : linked list pointer on the concerned data
Output : -
Comments: -
====================================================================== */
void NewFrameCallback(struct _ValueList * me)
{
// Reset Energy Watchdog
Energy.data_valid[0] = 0;
// Deprecated see setOption108
// send teleinfo raw data only if setup like that
if (Settings.teleinfo.raw_send) {
// Do we need to skip this frame
if (raw_skip == 0 ) {
Response_P(PSTR("{\"TIC\":{"));
// send teleinfo full frame or only changed data
bool hasData = ResponseAppendTInfo(' ', Settings.teleinfo.raw_report_changed ? false : true );
ResponseJsonEndEnd();
// Publish adding ADCO serial number into the topic
// Need setOption4 to be enabled
// No need to send empty payload
if (hasData) {
MqttPublishPrefixTopicRulesProcess_P(TELE, PSTR(D_RSLT_SENSOR), false);
}
// Reset frame skip counter (if 0 it's disabled)
raw_skip = Settings.teleinfo.raw_skip;
} else {
AddLog(LOG_LEVEL_DEBUG, PSTR("TIC: not sending yet, will do in %d frame(s)"), raw_skip);
raw_skip--;
}
}
}
/* ======================================================================
Function: TInfoDrvInit
Purpose : Tasmota core driver init
Input : -
Output : -
Comments: -
====================================================================== */
void TInfoDrvInit(void) {
// If one TInfo RX pin declared use it
if (PinUsed(GPIO_TELEINFO_RX)) {
tic_rx_pin = Pin(GPIO_TELEINFO_RX);
} else {
// Case we are on denky V4 board without any TInfo RX pin selected
#ifdef ARDUINO_DENKY_PICOV3
tic_rx_pin = 8;
AddLog(LOG_LEVEL_INFO, PSTR("TIC: Denky D4 board, RX on GPIO%d"), tic_rx_pin);
#endif
}
// Enable teleinfo
if (tic_rx_pin != NOT_A_PIN) {
TasmotaGlobal.energy_driver = XNRG_15;
Energy.voltage_available = false;
Energy.phase_count = 1;
} else {
AddLog(LOG_LEVEL_ERROR, PSTR("TIC: Device has no RX pin"));
}
}
/* ======================================================================
Function: TInfoInit
Purpose : Tasmota core device init
Input : -
Output : -
Comments: -
====================================================================== */
void TInfoInit(void)
{
int baudrate;
// Deprecated SetOption102 - Set Baud rate for Teleinfo serial communication (0 = 1200 or 1 = 9600)
// now set in bit field TeleinfoCfg
if (Settings.teleinfo.mode_standard) {
baudrate = 9600;
tinfo_mode = TINFO_MODE_STANDARD;
serial_buffer_size = TELEINFO_SERIAL_BUFFER_STANDARD;
} else {
baudrate = 1200;
tinfo_mode = TINFO_MODE_HISTORIQUE;
serial_buffer_size = TELEINFO_SERIAL_BUFFER_HISTORIQUE;
}
AddLog(LOG_LEVEL_INFO, PSTR("TIC: RX on GPIO%d, baudrate %d"), tic_rx_pin, baudrate);
// Enable Teleinfo pin used, control it
if (PinUsed(GPIO_TELEINFO_ENABLE)) {
int8_t en_pin = Pin(GPIO_TELEINFO_ENABLE);
pinMode(en_pin, OUTPUT);
digitalWrite(en_pin, HIGH);
AddLog(LOG_LEVEL_INFO, PSTR("TIC: Enable with GPIO%d"), en_pin);
} else {
AddLog(LOG_LEVEL_INFO, PSTR("TIC: always enabled"));
}
#ifdef ESP8266
// Allow GPIO3 AND GPIO13 with hardware fallback to 2
// Set buffer to nnn char to support 250ms loop at 9600 baud
TInfoSerial = new TasmotaSerial(tic_rx_pin, -1, 2, 0, serial_buffer_size);
//pinMode(rx_pin, INPUT_PULLUP);
#endif // ESP8266
#ifdef ESP32
// Set buffer to nnn char to support 250ms loop at 9600 baud
TInfoSerial = new TasmotaSerial(tic_rx_pin, -1, 1, 0, serial_buffer_size);
#endif // ESP32
// Trick here even using SERIAL_7E1 or TS_SERIAL_7E1
// this is not working, need to call SetSerialConfig after
if (TInfoSerial->begin(baudrate)) {
#ifdef ESP8266
if (TInfoSerial->hardwareSerial() ) {
ClaimSerial();
// This is a hack, looks like begin does not take into account
// the TS_SERIAL_7E1 configuration so on ESP8266 this is
// working only on Serial RX pin (Hardware Serial) for now
//SetSerialConfig(TS_SERIAL_7E1);
//TInfoSerial->setTimeout(TINFO_READ_TIMEOUT);
AddLog(LOG_LEVEL_INFO, PSTR("TIC: using hardware serial"));
} else {
AddLog(LOG_LEVEL_INFO, PSTR("TIC: using software serial"));
}
#endif // ESP8266
#ifdef ESP32
SetSerialConfig(TS_SERIAL_7E1);
AddLog(LOG_LEVEL_INFO, PSTR("TIC: using ESP32 hardware serial"));
#endif // ESP32
// Init teleinfo
tinfo.init(tinfo_mode);
// Attach needed callbacks
tinfo.attachADPS(ADPSCallback);
tinfo.attachData(DataCallback);
tinfo.attachNewFrame(NewFrameCallback);
tinfo_found = true;
if (Settings.teleinfo.raw_send) {
raw_skip = Settings.teleinfo.raw_skip;
AddLog(LOG_LEVEL_INFO, PSTR("TIC: Raw mode enabled"));
if (raw_skip) {
AddLog(LOG_LEVEL_INFO, PSTR("TIC: Sending only one frame over %d "), raw_skip+1);
}
}
AddLog(LOG_LEVEL_INFO, PSTR("TIC: Ready"));
}
}
/* ======================================================================
Function: TInfoCmd
Purpose : Tasmota core command engine for Teleinfo commands
Input : -
Output : -
Comments: -
====================================================================== */
bool TInfoCmd(void) {
bool serviced = false;
char command[CMDSZ];
//uint8_t name_len = strlen(D_NAME_TELEINFO);
// At least "EnergyConfig"
if (CMND_ENERGYCONFIG == Energy.command_code) {
AddLog_P(LOG_LEVEL_DEBUG, PSTR("TIC: len %d, data '%s'"), XdrvMailbox.data_len, XdrvMailbox.data ? XdrvMailbox.data : "null" );
// Just "EnergyConfig" no more parameter
// Show Teleinfo configuration
if (XdrvMailbox.data_len == 0) {
char mode_name[MAX_TINFO_COMMAND_NAME];
char raw_name[MAX_TINFO_COMMAND_NAME];
int index_mode = Settings.teleinfo.mode_standard ? CMND_TELEINFO_STANDARD : CMND_TELEINFO_HISTORIQUE;
int index_raw = Settings.teleinfo.raw_send ? CMND_TELEINFO_RAW_FULL : CMND_TELEINFO_RAW_DISABLE;
if (Settings.teleinfo.raw_send && Settings.teleinfo.raw_report_changed) {
index_raw = CMND_TELEINFO_RAW_CHANGE;
}
// Get the mode and raw name
GetTextIndexed(mode_name, MAX_TINFO_COMMAND_NAME, index_mode, kTInfo_Commands);
GetTextIndexed(raw_name, MAX_TINFO_COMMAND_NAME, index_raw, kTInfo_Commands);
AddLog_P(LOG_LEVEL_INFO, TELEINFO_COMMAND_SETTINGS, mode_name, raw_name, Settings.teleinfo.raw_skip, Settings.teleinfo.raw_limit);
serviced = true;
// At least "EnergyConfig xyz" plus one space and one (or more) char
// so "EnergyConfig 0" or "EnergyConfig Teleinfo Standard"
} else if (XdrvMailbox.data_len) {
// Now point on parameter
char *pParam = XdrvMailbox.data;
char *p = pParam;
char *pValue = nullptr;
// Check for sub parameter ie : EnergyConfig Teleinfo Skip value
while(*p) {
if (*p == ' ') {
if (*(p+1)) {
// Skip parameter by emptying th string so below getcommandcode works
*p++ = 0x00;
// Save parameter value for later
pValue = p;
}
break;
}
p++;
}
int command_code = GetCommandCode(command, sizeof(command), pParam, kTInfo_Commands);
AddLog_P(LOG_LEVEL_DEBUG, PSTR("TIC: param '%s' cmnd %d"), pParam, command_code);
switch (command_code) {
case CMND_TELEINFO_STANDARD:
case CMND_TELEINFO_HISTORIQUE: {
char mode_name[MAX_TINFO_COMMAND_NAME];
// Get the mode name
GetTextIndexed(mode_name, MAX_TINFO_COMMAND_NAME, command_code, kTInfo_Commands);
// Only if current settings is different than previous
if ( (tinfo_mode==TINFO_MODE_STANDARD && command_code==CMND_TELEINFO_HISTORIQUE) ||
(tinfo_mode==TINFO_MODE_HISTORIQUE && command_code==CMND_TELEINFO_STANDARD) ) {
// Cleanup Serial not sure it will works since
// there is no end() or close() on tasmotaserial class
if (TInfoSerial) {
TInfoSerial->flush();
//TInfoSerial->end();
free(TInfoSerial);
}
// Change mode
Settings.teleinfo.mode_standard = command_code == CMND_TELEINFO_STANDARD ? 1 : 0;
AddLog_P(LOG_LEVEL_INFO, PSTR("TIC: '%s' mode"), mode_name);
// Re init teleinfo (LibTeleinfo always free linked list on init)
TInfoInit();
serviced = true;
} else {
AddLog_P(LOG_LEVEL_INFO, PSTR("TIC: No change to '%s' mode"), mode_name);
}
}
break;
case CMND_TELEINFO_RAW_DISABLE:
case CMND_TELEINFO_RAW_FULL:
case CMND_TELEINFO_RAW_CHANGE: {
// Enable all RAW frame send
char raw_name[MAX_TINFO_COMMAND_NAME];
// Get the raw name
GetTextIndexed(raw_name, MAX_TINFO_COMMAND_NAME, command_code, kTInfo_Commands);
if (command_code == CMND_TELEINFO_RAW_DISABLE) {
// disable raw mode
Settings.teleinfo.raw_send = 0;
} else {
// enable raw mode
Settings.teleinfo.raw_send = 1;
Settings.teleinfo.raw_report_changed = command_code == CMND_TELEINFO_RAW_CHANGE ? 1 : 0;
}
AddLog_P(LOG_LEVEL_INFO, PSTR("TIC: Raw to '%s'"), raw_name);
serviced = true;
}
break;
case CMND_TELEINFO_SKIP: {
// Set Raw mode skip frame number
char skip_name[MAX_TINFO_COMMAND_NAME];
// Get the raw name
GetTextIndexed(skip_name, MAX_TINFO_COMMAND_NAME, command_code, kTInfo_Commands);
int l = strlen(skip_name);
// At least "EnergyConfig Teleinfo skip" plus one space and one (or more) digit
// so "EnergyConfig Skip 0" or "EnergyConfig Skip 123"
if ( pValue ) {
int value = atoi(pValue);
if (value >= 0 && value <= 255) {
raw_skip = value;
Settings.teleinfo.raw_skip = raw_skip;
if (raw_skip ==0) {
AddLog_P(LOG_LEVEL_INFO, PSTR("TIC: Raw no skip"));
} else {
AddLog_P(LOG_LEVEL_INFO, PSTR("TIC: Raw each %d frame(s)"), raw_skip+1);
}
serviced = true;
} else {
AddLog_P(LOG_LEVEL_INFO, PSTR("TIC: skip can be 0 to 255"));
}
} else {
AddLog_P(LOG_LEVEL_INFO, PSTR("TIC: no skip value"));
}
}
break;
default:
AddLog_P(LOG_LEVEL_INFO, PSTR("TIC: bad cmd param '%s'"), pParam);
break;
}
}
}
return serviced ;
}
/* ======================================================================
Function: TInfoProcess
Purpose : Tasmota callback executed often enough to read serial
Input : -
Output : -
Comments: -
====================================================================== */
//#define MEASURE_PERF // Define to enable performance measurments
void TInfoProcess(void)
{
static char buff[TELEINFO_PROCESS_BUFFER];
#ifdef MEASURE_PERF
static unsigned long max_time = 0;
unsigned long duration = millis();
static int max_size = 0;
int tmp_size = 0;
#endif
if (!tinfo_found) {
return;
}
int size = TInfoSerial->read(buff,TELEINFO_PROCESS_BUFFER);
while ( size ) {
#ifdef MEASURE_PERF
tmp_size += size;
#endif
// Process as many bytes as available in serial buffer
for(int i = 0; size; i++, size--)
{
buff[i] &= 0x7F;
// data processing
tinfo.process(buff[i]);
}
size = TInfoSerial->read(buff,TELEINFO_PROCESS_BUFFER);
}
#ifdef MEASURE_PERF
duration = millis()-duration;
if (duration > max_time) { max_time = duration; AddLog(LOG_LEVEL_INFO,PSTR("TIC: max_time=%lu"), max_time); }
if (tmp_size > max_size) { max_size = tmp_size; AddLog(LOG_LEVEL_INFO,PSTR("TIC: max_size=%d"), max_size); }
#endif
}
/* ======================================================================
Function: TInfoShow
Purpose : Tasmota callback executed to send telemetry or WEB display
Input : -
Output : -
Comments: -
====================================================================== */
#ifdef USE_WEBSERVER
const char HTTP_ENERGY_ID_TELEINFO[] PROGMEM = "{s}ID{m}%s{e}" ;
const char HTTP_ENERGY_INDEX_TELEINFO[] PROGMEM = "{s}%s{m}%s " D_UNIT_WATTHOUR "{e}" ;
const char HTTP_ENERGY_PAPP_TELEINFO[] PROGMEM = "{s}" D_POWERUSAGE "{m}%d " D_UNIT_WATT "{e}" ;
//const char HTTP_ENERGY_IINST_TELEINFO[] PROGMEM = "{s}" D_CURRENT "%s{m}%d " D_UNIT_AMPERE "{e}" ;
const char HTTP_ENERGY_TARIF_TELEINFO[] PROGMEM = "{s}" D_CURRENT_TARIFF "{m}Heures %s{e}" ;
const char HTTP_ENERGY_CONTRAT_TELEINFO[] PROGMEM = "{s}" D_CONTRACT "{m}%s %d" D_UNIT_AMPERE "{e}" ;
const char HTTP_ENERGY_LOAD_TELEINFO[] PROGMEM = "{s}" D_POWER_LOAD "{m}%d" D_UNIT_PERCENT "{e}" ;
const char HTTP_ENERGY_IMAX_TELEINFO[] PROGMEM = "{s}" D_MAX_CURRENT "{m}%d" D_UNIT_AMPERE "{e}" ;
const char HTTP_ENERGY_IMAX3_TELEINFO[] PROGMEM = "{s}" D_MAX_CURRENT "{m}%d / %d / %d " D_UNIT_AMPERE "{e}" ;
const char HTTP_ENERGY_PMAX_TELEINFO[] PROGMEM = "{s}" D_MAX_POWER "{m}%d" D_UNIT_WATT "{e}" ;
const char HTTP_ENERGY_PMAX3_TELEINFO[] PROGMEM = "{s}" D_MAX_POWER "{m}%d / %d / %d " D_UNIT_WATT "{e}" ;
const char HTTP_ENERGY_LOAD_BAR[] PROGMEM = "<tr><div style='margin:4px;padding:0px;background-color:#ddd;border-radius:4px;'>"
"<div style='font-size:0.75rem;font-weight:bold;padding:0px;text-align:center;border:1px solid #bbb;border-radius:4px;color:#444;background-color:%s;width:%d%%;'>"
"%d%%</div>"
"</div></tr>";
#endif // USE_WEBSERVER
void TInfoShow(bool json)
{
// Since it's an Energy device , current, voltage and power are
// already present on the telemetry frame. No need to add here
// Just add the raw label/values of the teleinfo frame
if (json)
{
// Add new value (not part of TIC JSON Object)
if (isousc) {
ResponseAppend_P(PSTR(",\"Load\":%d"),(int) ((Energy.current[0]*100.0f) / isousc));
}
// add teleinfo TIC object
ResponseAppend_P(PSTR("},\"TIC\":{"));
ResponseAppendTInfo(' ', true);
#ifdef USE_WEBSERVER
}
else
{
char name[33];
char value[33];
int percent;
if (isousc) {
uint8_t hue;
uint8_t red, green, blue;
char phase_color[8];
for (int i=0; i<Energy.phase_count ; i++ ) {
percent = (int) ((Energy.current[i]*100.0f) / isousc) ;
if (percent > 100) {
percent = 100;
}
// Gradiant from green (low load), yellow, orange and ending red (high load)
// Hue from 128 (green) to 0 (red) so reversed from percent
hue = changeUIntScale(100-percent, 0, 100, 0, 128);
HsToRgb(hue, 128, &red, &green, &blue);
snprintf_P(phase_color, sizeof(phase_color), PSTR("#%02X%02X%02X"), red, green, blue);
WSContentSend_P(HTTP_ENERGY_LOAD_BAR, phase_color, percent, percent);
}
}
if (tinfo_mode==TINFO_MODE_HISTORIQUE ) {
if (getValueFromLabelIndex(LABEL_BASE, value) ) {
GetTextIndexed(name, sizeof(name), LABEL_BASE, kLabel);
WSContentSend_P(HTTP_ENERGY_INDEX_TELEINFO, name, value);
}
if (getValueFromLabelIndex(LABEL_HCHC, value) ) {
GetTextIndexed(name, sizeof(name), LABEL_HCHC, kLabel);
WSContentSend_P(HTTP_ENERGY_INDEX_TELEINFO, name, value);
}
if (getValueFromLabelIndex(LABEL_HCHP, value) ) {
GetTextIndexed(name, sizeof(name), LABEL_HCHP, kLabel);
WSContentSend_P(HTTP_ENERGY_INDEX_TELEINFO, name, value);
}
if (Energy.phase_count==3) {
int imax[3];
for (int i=LABEL_IMAX1; i<=LABEL_IMAX3; i++) {
if (getValueFromLabelIndex(i, value) ) {
imax[i-LABEL_IMAX1] = atoi(value);
}
}
WSContentSend_P(HTTP_ENERGY_IMAX3_TELEINFO, imax[0], imax[1], imax[2]);
} else {
if (getValueFromLabelIndex(LABEL_IMAX, value) ) {
WSContentSend_P(HTTP_ENERGY_IMAX_TELEINFO, atoi(value));
}
}
if (getValueFromLabelIndex(LABEL_PMAX, value) ) {
WSContentSend_P(HTTP_ENERGY_PMAX_TELEINFO, atoi(value));
}
if (tarif) {
GetTextIndexed(name, sizeof(name), tarif-1, kTarifName);
WSContentSend_P(HTTP_ENERGY_TARIF_TELEINFO, name);
}
if (contrat && isousc) {
int percent = (int) ((Energy.current[0]*100.0f) / isousc) ;
GetTextIndexed(name, sizeof(name), contrat, kContratName);
WSContentSend_P(HTTP_ENERGY_CONTRAT_TELEINFO, name, isousc);
//WSContentSend_P(HTTP_ENERGY_LOAD_TELEINFO, percent);
}
} else if (tinfo_mode==TINFO_MODE_STANDARD ) {
if (getValueFromLabelIndex(LABEL_EAST, value) ) {
GetTextIndexed(name, sizeof(name), LABEL_EAST, kLabel);
WSContentSend_P(HTTP_ENERGY_INDEX_TELEINFO, name, value);
}
if (getValueFromLabelIndex(LABEL_EASF01, value) ) {
GetTextIndexed(name, sizeof(name), LABEL_EASF01, kLabel);
WSContentSend_P(HTTP_ENERGY_INDEX_TELEINFO, name, value);
}
if (getValueFromLabelIndex(LABEL_EASF02, value) ) {
GetTextIndexed(name, sizeof(name), LABEL_EASF02, kLabel);
WSContentSend_P(HTTP_ENERGY_INDEX_TELEINFO, name, value);
}
if (getValueFromLabelIndex(LABEL_SMAXSN, value) ) {
WSContentSend_P(HTTP_ENERGY_PMAX_TELEINFO, atoi(value));
}
if (getValueFromLabelIndex(LABEL_LTARF, value) ) {
WSContentSend_P(HTTP_ENERGY_TARIF_TELEINFO, value);
}
if (getValueFromLabelIndex(LABEL_NGTF, value) ) {
if (isousc) {
WSContentSend_P(HTTP_ENERGY_CONTRAT_TELEINFO, value, isousc);
}
}
}
// Serial number ADCO or ADSC if found
if (*serialNumber) {
WSContentSend_P(HTTP_ENERGY_ID_TELEINFO, serialNumber);
}
#endif // USE_WEBSERVER
}
}
/*********************************************************************************************\
* Interface
\*********************************************************************************************/
bool Xnrg15(uint8_t function)
{
bool result = false;
switch (function)
{
case FUNC_EVERY_250_MSECOND:
TInfoProcess();
break;
case FUNC_COMMAND:
result = TInfoCmd();
break;
case FUNC_JSON_APPEND:
TInfoShow(1);
break;
#ifdef USE_WEBSERVER
case FUNC_WEB_SENSOR:
TInfoShow(0);
break;
#endif // USE_WEBSERVER
case FUNC_INIT:
TInfoInit();
break;
case FUNC_PRE_INIT:
TInfoDrvInit();
break;
}
return result;
}
#endif // USE_TELEINFO
#endif // USE_ENERGY_SENSOR