From 0cf5a1241bd25cb362721ffc9bd643fc0240267c Mon Sep 17 00:00:00 2001 From: Claudio Barca Date: Sat, 12 Oct 2019 19:36:43 +0200 Subject: [PATCH] Add image --- LC-Technology-WiFi-Relay.md | 1 + 1 file changed, 1 insertion(+) diff --git a/LC-Technology-WiFi-Relay.md b/LC-Technology-WiFi-Relay.md index 063193ce..ba5b51da 100644 --- a/LC-Technology-WiFi-Relay.md +++ b/LC-Technology-WiFi-Relay.md @@ -3,6 +3,7 @@ The LC Technology relay devices use GPIO1 and GPIO3 for the serial communications used to control the relays. You do not need to specify these in the template. `SerialSend` uses these standard serial communications GPIO by default. In order to use LC Technology WiFi Relay for 1 relay version: +![](https://www.dhresource.com/0x0s/f2-albu-g6-M01-AB-F1-rBVaR1sFGr6AbvbGAANcsjYxEtQ983.jpg/esp8266-esp-01s-5v-esp01s-modulo-rel-wifi.jpg) * Set module to Generic (18) (in module configuration and click save) * Set D3 GPIO0 as Relay1 (21) (in module configuration and click save) * Disable SerialLog (type `seriallog 0` in the Tasmota console)