From 0e9e304c42e7adc13f2476331cd291fb824fb21f Mon Sep 17 00:00:00 2001 From: blakadder Date: Wed, 10 Apr 2019 18:48:09 +0200 Subject: [PATCH] Updated Hardware Preparation (markdown) --- Hardware-Preparation.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Hardware-Preparation.md b/Hardware-Preparation.md index 9c0156fb..0fea162a 100644 --- a/Hardware-Preparation.md +++ b/Hardware-Preparation.md @@ -18,7 +18,7 @@ Shorting your serial interface with AC will fry your module and programmer and w It is important to always have all mains power cables disconnected from the device while being connected via serial or even while the case of the module is opened. ## Serial Connection -Each device has its pins labelled differently. If the labelling isn't visible on the PCB please refer to the devices wiki entry or search the internet for correct pin locations. Device specific instructions and restrictions are documented in [Supported Modules](Supported-Modules) +Each device has its pins labelled differently. If the labelling isn't visible on the PCB please refer to the devices wiki entry or search the internet for correct pin locations. Device specific instructions and restrictions are documented in [Supported Modules](Supported-devices) When you have identified pins on your device, connect wires according to the table: