From 155a8d0cb5685e37d3f7c226d03087168b7ca71e Mon Sep 17 00:00:00 2001 From: Michael Ingraham <34340210+meingraham@users.noreply.github.com> Date: Mon, 21 Oct 2019 09:59:19 -0400 Subject: [PATCH] Updated ERC309 Kinetic Switch (markdown) --- ERC309-Kinetic-Switch.md | 2 -- 1 file changed, 2 deletions(-) diff --git a/ERC309-Kinetic-Switch.md b/ERC309-Kinetic-Switch.md index 9f663e4c..3ed5a211 100644 --- a/ERC309-Kinetic-Switch.md +++ b/ERC309-Kinetic-Switch.md @@ -14,8 +14,6 @@ Configure as a `Tuya Dimmer (54)` (support as a BASE module was introduced in 6. - [Module](https://user-images.githubusercontent.com/34905120/47967431-4a537880-e02b-11e8-955b-ee9843bd222d.jpg)
-[`SetOption65 0`](Commands#setoption65) - Disable slider control - #### Flashing This device uses a Tuya TYWE3S Wi-Fi PCB module. An easy soldering method is to take several Dupont style jumper wires, cut one end off, and apply a bit of solder to each stripped end. This will keep the wire flexible and prevent any circuit board pads from ripping off. Apply a bit of solder to each pad necessary to flash (double check your pin-outs). Once the wire and pad have solder simply put the two together and apply a bit of heat and they will join together.