From 18525fa8753262ac705e9ec244a811f2ef327a53 Mon Sep 17 00:00:00 2001
From: Michael Ingraham <34340210+meingraham@users.noreply.github.com>
Date: Mon, 26 Aug 2019 15:59:20 -0400
Subject: [PATCH] UK V1 Flashing Contacts

---
 Sonoff-T1.md | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Sonoff-T1.md b/Sonoff-T1.md
index 2afdeae4..7a13a20e 100644
--- a/Sonoff-T1.md
+++ b/Sonoff-T1.md
@@ -25,6 +25,7 @@ The front circuit board should be disconnected from the rear relay board to prev
 The following board layouts are from the 3 variants of the Sonoff T1 UK variant and are marked Sonoff T1 R2 UK Touch Board, Ver 1.0. 
 
 ![img_20180113_094236](https://user-images.githubusercontent.com/10469147/34905168-6128981a-f84b-11e7-9cf0-e0e4c3b0bd55.jpg)
+![UKv1_flashingContacts](https://user-images.githubusercontent.com/34340210/63719105-3414e400-c81a-11e9-9b4c-98600e5ad365.jpg)
 
 1. Entering Flashing mode varies between the 1, 2 and 3 channel versions. See the above picture for button nomenclature used. (The variations between the 3 versions appear to be managed by the touch IC rather than in the ESP).  
 To enter flashing mode the unit should be powered and connected to the programmer of choice. Touch Button 1 should then be held while the reset button (4) is pressed. When the device reboots, Button 1 can be released.