diff --git a/Commands.md b/Commands.md index 741be783..129e5b5d 100644 --- a/Commands.md +++ b/Commands.md @@ -148,7 +148,7 @@ SaveData|`0` = save parameter changes only manually
`1` = save parameter chan SerialLog | Disable hardware serial bridge and
`0` = disable serial logging
`1` = show only error messages
`2` = show error and info messages
`3` = show error, info and debug messages
`4` = show error, info and more debug messages
`5` = show all messages Sleep|`0` = turn sleep off
`1..250` = set sleep duration in mSec to enable [energy saving](energy-saving) *(default = `50`)* State | Show current device state in `%prefix%/%topic%/RESULT` topic -Status | Show abbreviated [status information](JSON-Status-Responses#basic-response)
`0` = show all status information (1 - 11)
`1` = show device parameters information
`2` = show firmware information
`3` = show logging and telemetry information
`4` = show memory information
`5` = show network information
`6` = show MQTT information
`7` = show time information
`8` = show connected sensor information
`9` = show power thresholds *(only on modules with power monitoring)*
`10` = same as `Status 8` *(retained for backwards compatibility)*
`11` = show information equal to [`TelePeriod`](#teleperiod) state message +Status | ` ` = show abbreviated [status information](JSON-Status-Responses#basic-response)
`0` = show all status information (1 - 11)
`1` = show device parameters information
`2` = show firmware information
`3` = show logging and telemetry information
`4` = show memory information
`5` = show network information
`6` = show MQTT information
`7` = show time information
`8` = show connected sensor information
`9` = show power thresholds *(only on modules with power monitoring)*
`10` = same as `Status 8` *(retained for backwards compatibility)*
`11` = show information equal to [`TelePeriod`](#teleperiod) state message SysLog|`0` = disable syslog logging
`1` = show only error messages
`2` = show error and info messages
`3` = show error, info and debug messages
`4` = show error, info and more debug messages
`5` = show all messages Time|`0` = enable NTP *(default)*
`` = disable NTP and set UTC time as epoch value if greater than `1451602800` (January 1, 2016) TimeSTD
TimeDST | Set policies for the beginning of daylight saving time (DST) and return back to standard time (STD)
`0` = reset parameters to firmware defaults
`H`,`W`,`M`,`D`,`h`,`T`
`H` = hemisphere (`0` = northern hemisphere / `1` = southern hemisphere)
`W` = week (`0` = last week of month, `1..4` = first .. fourth)
`M` = month (`1..12`)
`D` = day of week (`1..7` `1` = sunday `7` = saturday)
`h` = hour (`0..23`)
`T` = timezone (`-780..780`) (offset from UTC in **MINUTES** - 780min/60min=13hrs)
_Example:_ `TIMEDST 1,1,10,1,2,660`