From 20539221156585f1274941408e67c9a607956721 Mon Sep 17 00:00:00 2001
From: Michael Ingraham <34340210+meingraham@users.noreply.github.com>
Date: Wed, 14 Aug 2019 13:57:13 -0400
Subject: [PATCH] Updated Tuya Dimmer (markdown)

---
 Tuya-Dimmer.md | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)

diff --git a/Tuya-Dimmer.md b/Tuya-Dimmer.md
index bb54714e..11badebf 100644
--- a/Tuya-Dimmer.md
+++ b/Tuya-Dimmer.md
@@ -66,15 +66,14 @@ The CE dimmer uses standard Tuya GPIO
 The procedure is similar to above, additionally NRST must be connected to GND during flashing.
 
 #### Additional configuration
-`SetOption34 2` (This sets the ID used to set the dim-level)
+[`SetOption34 2`](Commands#setoption34) Set the Dimmer ID. This is needed in order to set the dim-level.  
+[`SetOption41 3`](Commands#setoption41) Set the number of relays for the Tuya Dimmer. Check [here](../issues/5545#issuecomment-493599301)  
+[`SetOption66`](Commands#setoption66) Set the Tuya dimmer range range  
+[`SetOption69`](Commands#setoption69) Tuya Dimmer 10% lower limit override
 
-Some dimmers might need `SetOption38 3` as well. Check here(https://github.com/arendst/Sonoff-Tasmota/issues/5545#issuecomment-493599301)
-
-Post Release 6.6.0.3 `SetOption41` is needed instead of `SetOption38`
-Also check `SetOption66`, `SetOption69`
 #### Optional configuration (recommended)
 
-`LedState 0` (To only use the green LED for wifi/mqtt connectivity.)
+[`LedState 0`](Commands#ledstate) Only use the green LED for Wi-Fi/MQTT connectivity status.  
 
 Product Links: