diff --git a/Sensor-Configuration.md b/Sensor-Configuration.md
index c21ad9bc..c92562c8 100644
--- a/Sensor-Configuration.md
+++ b/Sensor-Configuration.md
@@ -1,3 +1,7 @@
+The software allows for dynamically configuration of sensors to selected GPIO pins. Depending on the type of (Sonoff) Module certain GPIO pins are easily accessable.
+
+Configuration can be done by either the web pages OR using the commands ``modules``, ``module``, ``gpios`` and ``gpio``.
+
The software supports:
- [single wire sensors](#single-wire-sensor)
- [dual wire or I2C sensors](#i2c-sensor)
@@ -16,7 +20,7 @@ The following single wire sensors are supported:
- External switch - ``Switch (8)``
Use ``SwitchMode`` to tune it's behaviour
- HC-SR501 PIR Motion Detection - ``Switch (8)``
Use ``SwitchMode`` to tune it's behaviour
-You can dynamically add a sensor using the following (MQTT) commands:
+You can add a sensor using the following (MQTT) commands:
1. ``modules`` - show supported modules
2. ``module 4`` - select desired module functionality for a Sonoff TH (Wait for the restart)
@@ -34,7 +38,7 @@ The following I2C sensors are supported using ``I2C SCL (5)`` and ``I2C SDA (6)`
- BME280 Pressure, Temperature and Humidity
- HTU21 Temperature and Humidity
-You can dynamically add I2C sensors using the following (MQTT) commands:
+You can add I2C sensors using the following (MQTT) commands:
1. ``modules`` - show supported modules
2. ``module 1`` - select desired module functionality for a Sonoff Basic (Wait for the restart)
@@ -49,7 +53,7 @@ The software will autodetect the connected I2C devices. For some sensors to show
The following additional device(s) are supported:
- WS2812 led string - ``WS2812 (7)``
Using NeoPixelBus library and external 5V power supply
-You can dynamically add a device using the following (MQTT) commands:
+You can add a device using the following (MQTT) commands:
1. ``modules`` - show supported modules
2. ``module 1`` - select desired module functionality for a Sonoff Basic (Wait for the restart)