diff --git a/Commands.md b/Commands.md
index 90de31cd..6d03f026 100644
--- a/Commands.md
+++ b/Commands.md
@@ -153,7 +153,7 @@ See also		 | [`SetOption11`](#SetOption11) - Swap pushbutton single and double p
 <a id="Status"></a>Status | ` ` = show abbreviated [status information](JSON-Status-Responses#basic-response)<BR>`0` = show all status information (1 - 11)<BR>`1` = show device parameters information<BR>`2` = show firmware information<BR>`3` = show logging and telemetry information<BR>`4` = show memory information<BR>`5` = show network information<BR>`6` = show MQTT information<BR>`7` = show time information<BR>`8` = show connected sensor information<BR>`9` = show power thresholds *(only on modules with power monitoring)*<BR>`10` = same as `Status 8` *(retained for backwards compatibility)*<BR>`11` = show information equal to [`TelePeriod`](#teleperiod) state message
 <a id="SysLog"></a>SysLog|`0` = disable syslog logging<BR> `1` = show only error messages<BR> `2` = show error and info messages<BR>`3` = show error, info and debug messages<BR>`4` = show error, info and more debug messages<BR>`5` = show all messages
 <a id="Template"></a>Template | Show current [Template](Templates)<BR>`0` = create template from active module<BR>`1..71` = create template from a supported module<BR>`255` = merge current module and template settings into new template<BR>`{ ... }` = store template in a [JSON payload](Templates#explanation-of-template-properties)<BR>After setting a template using this command, you can activate the template by selection Module `0`, i.e., send the command `Module 0`
-<a id="Time"></a>Time|`0` = enable NTP *(default)*<BR>`1` = format JSON message timestamp in both ISO and Epoch format<BR>`2` = format JSON message timestamp in ISO format<BR>`3` = format JSON message timestamp in Epoch format<BR>`<value>` = disable NTP and set UTC time as epoch value if greater than `1451602800` (January 1, 2016)
+<a id="Time"></a>Time|`0` = enable NTP *(default)*<BR>`1` = format JSON message timestamp in ISO format<BR>`2` = format JSON message timestamp in both ISO and Epoch format<BR>`3` = format JSON message timestamp in Epoch format<BR>`<value>` = disable NTP and set UTC time as epoch value if greater than `1451602800` (January 1, 2016)
 <a id="TimeSTD"></a><a id="TimeDST"></a>TimeSTD<BR>TimeDST | Set policies for the beginning of daylight saving time (DST) and return back to standard time (STD)<BR>`0` = reset parameters to firmware defaults<BR>`H`,`W`,`M`,`D`,`h`,`T`<BR>   `H` = hemisphere (`0` = northern hemisphere / `1` = southern hemisphere)<BR>   `W` = week (`0` = last week of month, `1..4` = first .. fourth)<BR>   `M` = month (`1..12`)<BR>   `D` = day of week (`1..7` `1` = sunday `7` = saturday)<BR>   `h` = hour (`0..23`)<BR>   `T` = timezone (`-780..780`) (offset from UTC in **MINUTES** - 780min/60min=13hrs)<BR>_Example:_ `TIMEDST 1,1,10,1,2,660`
 <a id="Timezone"></a>Timezone|`-13..13` = set timezone offset from UTC in **HOURS**<BR>`99` = use timezone configured with `TimeDST` and `TimeSTD`
 <a id="TuyaMCU"></a>TuyaMCU| ` ` = show current TuyaMCU FunctionId and DpId mapping<BR> `<functionId>,<dpId>` = Set TuyaMCU FunctionId and DpId mapping<BR> Details for FunctionId and DpId [here](https://github.com/arendst/Sonoff-Tasmota/wiki/TuyaMCU)