diff --git a/Initial-Configuration.md b/Initial-Configuration.md
index ef76ffd2..682eb4af 100644
--- a/Initial-Configuration.md
+++ b/Initial-Configuration.md
@@ -3,7 +3,7 @@ You've successfully uploaded the Sonoff-Tasmota firmware to your module.
 1. Connect to (AC) power (Serial **NOT** connected)
 2. If your WiFi was not set prior compile as described in [Upload](Upload#hints) section, configure Wifi by using one of the provided configuration modes: [Button Usage](Button-Usage) or use WPS if your router supports it.
 3. Connect to the device webpage (http://\[sonoff-ip]\/cn) NOTE: Replace [sonoff-ip] with actual IP address of your Sonoff device.
-4. Select the correct module type from the configuration frontend. If your device is not listed, a [user contributed device template](User-created-templates) ([explanation](Templates)) may be available. If a [template](User-created-templates) is not available, follow the [Procedure for configuring new devices](Configuration-Procedure-for-New-Devices).
+4. Select the correct module type from the configuration frontend. If your device is not listed, a [user contributed device template](User-created-templates) ([explanation](Templates)) may be available. If a [template](User-created-templates) is not available, follow the [procedure for configuring new devices](Configuration-Procedure-for-New-Devices).
 5. Configure the MQTT broker connection, choose a unique topic, e.g. "sonoff-kitchenlight"
 6. Test communication with the MQTT client of your choice
 7. Integrate with the Control interface or home automation solution of your choice