diff --git a/Commands.md b/Commands.md index 1b30d27c..08519a83 100644 --- a/Commands.md +++ b/Commands.md @@ -108,7 +108,7 @@ Simply put, other messages may precede messages published as a result of your co FanSpeed | Fan speed control *([iFan02](Sonoff-iFan02) module only)*
`0` = turn fan OFF
`1..3` = set fan speed
`+` = increase fan speed
`-` = decrease fan speed
Interlock | Relay interlock mode and group selection.
`0` = set self-locking mode for all relays *(default)*
`1` = set interlock mode for selected relays | | Add up to 8 relays in 1 to 4 interlock groups, each separated by a space. For example
`1,2 3,4` = Group Relay1 and Relay2 in group 1 and Relay3 and Relay4 in group 2 (_note the space between the two group declarations_)
`1,2,3` = group Relay1, Relay2 and Relay3 in a single interlock group
`1 3 2,4` = Relay1 is in group 1, Relay3 in group 2, Relay2 and Relay4 in group 3 -LedMask | Allows setting a [``](https://en.wikipedia.org/wiki/Mask_(computing)#Masking_bits_to_1) which specifies which relays control the LED indicator used to display whether a relay is latched/powered. The order of the `` is from most significant bit (MSB) to least significant bit (LSB). Bit 15 (MSB) masks Relay16 through bit 0 (LSB) which masks Relay1, respectively. For every relay to be included in controlling the power LED, set its corresponding bit in the ``. `` bits without corresponding configured module relays have no effect and can be ignored. Introduced in [v6.5.0.7](../commit/df6645481e08b36fe61aaebeeeed249d60730386)

`` = [bitwise](https://whatis.techtarget.com/definition/bitwise) value representing each relay. Values may be entered as either hexadecimal or decimal values (e.g., 0xFFFF = 65535). `0xFFFF` (= 1111 1111 1111 1111) All relays control the power LED _(default)_

[LedState](#ledstate) must be enabled (i.e., `!= 0`) in order for `LedMask` to take effect.

**Examples:**
  • `LedMask 0xFFFD` Every relay, except Relay2, controls the power LED (0xFFFD = 1111 1111 1111 1101)
  • `LedMask 0x0002` Only Relay 2 controls the power LED (0x0002 = 0000 0000 0000 0010)
    • +LedMask | Allows setting a [``](https://en.wikipedia.org/wiki/Mask_(computing)#Masking_bits_to_1) which specifies which relays control the LED indicator used to display whether a relay is latched/powered. The order of the `` is from most significant bit (MSB) to least significant bit (LSB). Bit 15 (MSB) masks Relay16 through bit 0 (LSB) which masks Relay1, respectively. For each relay to be included in controlling the power LED, set its corresponding bit in the ``. `` bits without corresponding configured module relays have no effect and can be ignored. Introduced in [v6.5.0.7](../commit/df6645481e08b36fe61aaebeeeed249d60730386)

    `` = [bitwise](https://whatis.techtarget.com/definition/bitwise) value representing each relay. Values may be entered as either hexadecimal or decimal values (e.g., 0xFFFF = 65535). `0xFFFF` (= 1111 1111 1111 1111) All relays control the power LED _(default)_

    [LedState](#ledstate) must be enabled (i.e., `!= 0`) in order for `LedMask` to take effect.

    **Examples:**
  • `LedMask 0xFFFD` Every relay, except Relay2, controls the power LED (0xFFFD = 1111 1111 1111 1101)
  • `LedMask 0x0002` Only Relay 2 controls the power LED (0x0002 = 0000 0000 0000 0010)
    • LedPower | LED power state as on or off
    `0` = turn LED OFF and LedState OFF
    `1` = turn LED ON and LedState OFF
    (Use `Backlog LedPower 0; SetOption31 1` to disable LED even when Wi-Fi or MQTT is not connected) LedState | Manage LED state
    `0` = disable use of LED as much as possible
    `1` = show power state on LED (LED on when power on) *(inverted for Sonoff Touch/T1)*
    `2` = show MQTT subscriptions as a LED blink
    `3` = show power state and MQTT subscriptions as a LED blink
    `4` = show MQTT publications as a LED blink
    `5` = show power state and MQTT publications as a LED blink
    `6` = show all MQTT messages as a LED blink
    `7` = show power state and MQTT messages as a LED blink

    `8` = LED on when Wi-Fi and MQTT are connected. ***Cannot be issued directly*** and is only activated when `LedPower` is switched from `0` to `1` Power\ | Control Relay\ power state and also resetting PulseTime\
    `0` / `off` = turn OFF
    `1` / `on` = turn ON
    `2` / `toggle` = if relay is `ON` switch to `OFF` and vice versa
    `3` / `blink` = toggle power for [BlinkCount](#blinkcount) times each [BlinkTime](#blinktime) duration (at the end of `blink`, relay power is returned to pre-blink state)
    `4` / `blinkoff` = stop blink sequence and return relay power to pre-blink state