diff --git a/Sonoff-iFan02.md b/Sonoff-iFan02.md
index 9b4aad8a..79805d3e 100644
--- a/Sonoff-iFan02.md
+++ b/Sonoff-iFan02.md
@@ -38,4 +38,36 @@ Two users report the TP16 pad lifting after soldering a wire to ground as shown
 ***
 ### Alternate Power Supply Schematic
 
-![esp8285 PINOUT](https://user-images.githubusercontent.com/24206271/43140236-857bc724-8f21-11e8-87c0-6f3688cb5eb0.gif)
\ No newline at end of file
+![esp8285 PINOUT](https://user-images.githubusercontent.com/24206271/43140236-857bc724-8f21-11e8-87c0-6f3688cb5eb0.gif)
+
+### HomeAssistant MQTT Fan config
+
+Credit to [finity](https://community.home-assistant.io/t/sonoff-ifan02-tasmota-mqtt-fan/64083/12)
+```
+- platform: mqtt  
+    name: "Master Bedroom Fan"
+    command_topic: "cmnd/sonoff_MBR_fan/FanSpeed"
+    speed_command_topic: "cmnd/sonoff_MBR_fan/FanSpeed"    
+    state_topic: "stat/sonoff_MBR_fan/RESULT"
+    speed_state_topic: "stat/sonoff_MBR_fan/RESULT"
+    state_value_template: >
+      {% if value_json.FanSpeed is defined %}
+        {% if value_json.FanSpeed == 0 -%}0{%- elif value_json.FanSpeed > 0 -%}4{%- endif %}
+      {% else %}
+        {% if states.fan.master_bedroom_fan.state == 'off' -%}0{%- elif states.fan.master_bedroom_fan.state == 'on' -%}4{%- endif %}
+      {% endif %}
+    speed_value_template: "{{ value_json.FanSpeed }}"
+    availability_topic: tele/sonoff_MBR_fan/LWT
+    payload_off: "0"
+    payload_on: "4"
+    payload_low_speed: "1"
+    payload_medium_speed: "2"
+    payload_high_speed: "3"
+    payload_available: Online
+    payload_not_available: Offline
+    speeds:
+      - off
+      - low
+      - medium
+      - high
+```
\ No newline at end of file