diff --git a/Sonoff-RF-Bridge-433.md b/Sonoff-RF-Bridge-433.md
index 614bf31e..c4838650 100644
--- a/Sonoff-RF-Bridge-433.md
+++ b/Sonoff-RF-Bridge-433.md
@@ -58,7 +58,7 @@ See [Supported Commands](Commands#sonoff-rf-bridge) for available Sonoff RF Brid
    1. For `R1`: Connect `GPIO4 to C2Ck` and `GPIO5 to C2D`. This wiring will look DIFFERENT than the picture to the right.
    2. For `R2`: Connect `GPIO4 to C2D` and `GPIO5 to C2Ck`. This wiring will look IDENTICAL to the picture on the right.
 2. Switch the ON/OFF switch on the board to 'OFF' to switch off the RF.
-3. Hold the pairing button while powering up the bridge via the 3.3V & GND pins. (See below if you need the USB power)
+3. Power up the bridge via the 3.3V & GND pins. (See below if you need the USB power)
 4. Go to the Web UI **Firmware Upgrade** > **Upgrade by File Upload**
     * Available since Tasmota v6.0.0a
 5. Select the .hex firmware file of your choosing.