diff --git a/MQTT-Features.md b/MQTT-Features.md index 68c41be2..7f391911 100644 --- a/MQTT-Features.md +++ b/MQTT-Features.md @@ -1,6 +1,6 @@ Sonoff responds to the following MQTT commands using MQTT Topic for ```cmnd/sonoff/<command>``` and MQTT Message/Payload for ```<parameter>```: -- the relay can be controlled with ```cmnd/sonoff/power on```, ```cmnd/sonoff/power off``` or ```cmnd/sonoff/power toggle```. The LED will blink twice and sends a MQTT status message like ```stat/sonoff/POWER ON```. The same function can be initiated with ```cmnd/sonoff/light on```. +- the relay can be controlled with ```cmnd/sonoff/power on```, ```cmnd/sonoff/power off``` or ```cmnd/sonoff/power toggle```. Sonoff will send a MQTT status message like ```stat/sonoff/POWER ON```. The same function can be initiated with ```cmnd/sonoff/light on```. - The power state message can be sent with the retain flag set. Enable this with ```cmnd/sonoff/PowerRetain on```. @@ -8,7 +8,7 @@ Sonoff responds to the following MQTT commands using MQTT Topic for ```cmnd/sono - the MQTT topic can be changed with ```cmnd/sonoff/topic sonoff1``` which reboots sonoff and makes it available for MQTT commands like ```cmnd/sonoff1/power on```. -- the OTA firmware location can be made known to sonoff with ```cmnd/sonoff/otaurl http://domus1:80/api/sonoff/user1.bin``` where domus1 is your webserver hosting the firmware. Reset to default with ```cmnd/sonoff/otaurl 1```. +- the OTA firmware location can be made known to sonoff with ```cmnd/sonoff/otaurl http://domus1:80/api/sonoff/sonoff.ino.bin``` where domus1 is your webserver hosting the firmware. Reset to default with ```cmnd/sonoff/otaurl 1```. - upgrade OTA firmware with ```cmnd/sonoff/upgrade 1```. @@ -16,10 +16,10 @@ Sonoff responds to the following MQTT commands using MQTT Topic for ```cmnd/sono - The button can send a MQTT message to the broker that in turn will switch the relay. To configure this you need to perform ```cmnd/sonoff/ButtonTopic sonoff``` where sonoff equals to Topic. The message can also be provided with the retain flag by ```cmnd/sonoff/ButtonRetain on```. -- Sonoff Pow status can be retreived with ```cmnd/sonoff/status 8``` or periodically every 5 minutes using ```cmnd/sonoff/TelePeriod 300```. If units appended to the message are needed execute command ```cmnd/sonoff/Units on```. +- Sonoff Pow status can be retreived with ```cmnd/sonoff/status 8``` or periodically every 5 minutes using ```cmnd/sonoff/TelePeriod 300```. - When a Sonoff Pow threshold like PowerLow has been met a message ```tele/sonoff/POWER_LOW ON``` will be sent. When the error is corrected a message ```tele/sonoff/POWER_LOW OFF``` will be sent. While most MQTT commands will result in a message in JSON format the power status feedback will always be returned like ```stat/sonoff/POWER ON``` too. -Telemetry data will be sent by prefix ```tele``` like ```tele/sonoff/TELEMETRY {"Temperature":"24.7"}``` +Telemetry data will be sent by prefix ```tele``` like ```tele/sonoff/SENSOR {"Time":"2017-02-16T10:13:52", "DS18B20":{"Temperature":20.6}}```