From 3d9f569f8af5dcdd3d48f6b72925485eaf1d4328 Mon Sep 17 00:00:00 2001
From: Adrien Foulon <6115458+Tofandel@users.noreply.github.com>
Date: Tue, 6 Aug 2019 17:59:23 +0200
Subject: [PATCH] Updated Sonoff TX Series (markdown)

---
 Sonoff-TX-Series.md | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Sonoff-TX-Series.md b/Sonoff-TX-Series.md
index c7cd6a30..0e752950 100644
--- a/Sonoff-TX-Series.md
+++ b/Sonoff-TX-Series.md
@@ -4,7 +4,7 @@ The boards are the same for all the series with only a difference in the T0 whic
 
 # Flashing
 
-The flashing steps are the same than for the older T1 switch but holding a switch does not put the board into flashing mode and there is no reset switch
+The flashing steps are the same than for the [older T1 switch](https://github.com/arendst/Sonoff-Tasmota/wiki/Sonoff-T1-UK,-EU,-and-US) but holding a switch does not put the board into flashing mode and there is no reset switch
 
 So to put a T1 Touch v1.0 board into flash mode you need to ground GPIO 0 which is exposed on the back of the board and plug the board to USB