From 4159bf378743de4ac64b11373cc728c7f307b425 Mon Sep 17 00:00:00 2001 From: Nathan Ellsworth <35043496+42Network@users.noreply.github.com> Date: Tue, 6 Nov 2018 16:29:30 -0600 Subject: [PATCH] Added note that Tasmota also works on Wemons D1 mini PRO v2.0.0 --- Wemos-D1-Mini.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Wemos-D1-Mini.md b/Wemos-D1-Mini.md index e504be52..1099427d 100644 --- a/Wemos-D1-Mini.md +++ b/Wemos-D1-Mini.md @@ -38,7 +38,7 @@ From the Menu -> PlatformIO -> Run Other Target... (F7) and choose PIO Upload (w # Configure Tasmota for Wemos ## Generic Module -In the Configuration -> Configure Module page, select **Module Type: "18 Generic"** (releases before 5.12.0 this was called "Wemos D1 Mini"). After Saving the settings, the WEMOS reboots with the Generic configuration. The first time you switch to "18 Generic" you will NOT see all the options as seen in the picture below YET. You have to save "18 Generic" first and when you go there again after the reboot you get the long table where you can change all the pin's parameters. +In the Configuration -> Configure Module page, select **Module Type: "18 Generic"** (releases before 5.12.0 this was called "Wemos D1 Mini"). After Saving the settings, the WEMOS reboots with the Generic configuration. The first time you switch to "18 Generic" you will NOT see all the options as seen in the picture below YET. You have to save "18 Generic" first and when you go there again after the reboot you get the long table where you can change all the pin's parameters. These steps are confirmed to also work with the Wemos D1 mini PRO v2.0.0.