From 43efcab29d8e92ea66e371427b68b7ccb6cff7df Mon Sep 17 00:00:00 2001
From: Michael Ingraham <34340210+meingraham@users.noreply.github.com>
Date: Fri, 8 Nov 2019 14:13:04 -0500
Subject: [PATCH] Tariff

---
 Commands.md | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Commands.md b/Commands.md
index 4f759fff..8ab02e70 100644
--- a/Commands.md
+++ b/Commands.md
@@ -302,7 +302,7 @@ PowerHigh<a id="PowerHigh"></a>|`0` = disable power high threshold *(default)*<B
 PowerLow<a id="PowerLow"></a>|`0` = disable power low threshold *(default)*<BR>`<value>` = set power low threshold value in W to send an MQTT telemetry message
 PowerSet<a id="PowerSet"></a>|`<value>` = [calibrate](power-monitoring-calibration) power to a target value in W&emsp;  »5.12.0
 Status<a id="Status"></a>|`8` = show power usage<BR>`9` = show power thresholds
-Tariff\<x><a id="Tariff"></a>|P1 Smart Meter tariff configuration&emsp;  »6.6.0.14<BR>`<hour>` = `0..23` or<BR>`<time>` = `00:00..23:59` or<BR>`<minutes>` = `0..1439`<BR>x = `1, 2, 9`<BR>`1` `STD,DST` Start time (STD & DST) for off-peak tariff<BR>`2` `STD,DST` End time (STD & DST) for off-peak tariff<BR>`9` `0/1`<BR>&emsp;`0` = use Start/End times also on weekends.<BR>&emsp;`1` = use off-peak tariff all weekend.<BR>If both `Tariff1` STD and `Tariff2` STD are equal, all tariffs are disabled.
+Tariff\<x><a id="Tariff"></a>|P1 Smart Meter tariff configuration&emsp;  »6.6.0.14<BR>x = `1, 2, 9`<BR>`1` `STD,DST` Start times for off-peak tariff<BR>`2` `STD,DST` End times for off-peak tariff<BR>`9` `0/1`<BR>&emsp;`0` = use Start/End times also on weekends.<BR>&emsp;`1` = use off-peak tariff all weekend.<BR>`STD` and `DST` may be specified as:<BR>&emsp;`<hour>` = `0..23` or<BR>&emsp;`<time>` = `00:00..23:59` or<BR>&emsp;`<minutes>` = `0..1439` (since midnight)<BR>If both `Tariff1` STD and `Tariff2` STD are equal, all tariffs are disabled.
 VoltageCal<a id="VoltageCal"></a>|Set calibration offset value for reported `Voltage` telemetry reading&emsp;  »6.4.1.6<BR><value> `1000..32767` *(default = `1950`)*<BR>Allows finer calibration for HLW8012, HJL01, and BL0937 energy monitoring devices
 VoltageHigh<a id="VoltageHigh"></a>|`0` = disable voltage high threshold *(default)*<BR>`<value>` = set voltage high threshold value in V 
 VoltageLow<a id="VoltageLow"></a>|`0` = disable voltage low threshold *(default)*<BR>`<value>` = set voltage low threshold value in V