From 462b6d12cf0b7e6e1fe0bc2b0d157b18e40e5902 Mon Sep 17 00:00:00 2001 From: Michael Ingraham <34340210+meingraham@users.noreply.github.com> Date: Sat, 23 Feb 2019 10:53:25 -0500 Subject: [PATCH] Updated Energy Saving (markdown) --- Energy-Saving.md | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/Energy-Saving.md b/Energy-Saving.md index 5ca80c1e..52c46946 100644 --- a/Energy-Saving.md +++ b/Energy-Saving.md @@ -2,7 +2,7 @@ Using the [Sleep](Commands#sleep) command you can instruct Tasmota to sleep for As of 6.3.0.15 [Dynamic Sleep](Dynamic%20Sleep) is enabled by default with a value of 50. To continue using Normal Sleep you may disable it by using the command: -`[SetOption60](Commands#setoption60) 1` +[`SetOption60 1`](Commands#setoption60) [Click here to see the Wiki for Dynamic Sleep](Dynamic%20Sleep) @@ -16,7 +16,7 @@ If your Sonoff needs to do something continuously, this will be affected. E.g. S Also, if using [KNX IP Protocol](KNX-Features), `Sleep` needs to be 0 in order to avoid losing any telegram. **Notes:** -- Starting with Tasmota 6.1.1.12 `Sleep` ≠ `0` has no impact on real time related commands like `Uptime`, `Delay`, `[PulseTime](Commands#pulsetime)`, `[TelePeriod](Commands#teleperiod)` and `[Blinktime](Commands#blinktime)`. +- Starting with Tasmota 6.1.1.12 `Sleep` ≠ `0` has no impact on real time related commands like `Uptime`, `Delay`, [`PulseTime`](Commands#pulsetime), [`TelePeriod`](Commands#teleperiod) and [`Blinktime`](Commands#blinktime). - As the WiFi Modem on an ESP8266 is the major consumer - using Sleep with WiFi AP mode enabled is more or less without effect. ## Sonoff power consumption and measurement @@ -69,4 +69,4 @@ Further increasing the sleep value there are more and more ~90 ms periods with a As already noticed with `Sleep 100` the number periods having 8-10 mA instead of 15-20 mA are again increasing: ![sleep 250 1](https://user-images.githubusercontent.com/6636844/36341493-5696bf48-13ef-11e8-8155-44ac90200df8.png) -The quantity measurement confirms the suspicion that a sleep value ≠ 0 results in reduce the power consumption about 1/3. +The quantity measurement confirms the suspicion that a sleep value ≠ 0 results in reducing the power consumption about 1/3.