diff --git a/Initial-Configuration.md b/Initial-Configuration.md
index d9b8c13a..71261269 100644
--- a/Initial-Configuration.md
+++ b/Initial-Configuration.md
@@ -2,9 +2,9 @@ You've successfully uploaded the Sonoff-Tasmota firmware to your module.
 
 1. Connect to (AC) power (Serial **NOT** connected)
 2. If your WiFi was not set prior compile as described in [Upload](Upload#hints) section, configure Wifi by using one of the provided configuration modes: [Button Usage](Button-Usage) or use WPS if your router supports it.
-3. Connect to the device webpage (http://\[device-ip]\/cn) NOTE: Replace [device-ip] with actual IP address of your Sonoff device.
+3. Connect to the device webpage (http://\[device-ip]\/cn) NOTE: Replace [device-ip] with actual IP address of your device.
 4. Select the correct module type from the configuration frontend. If your device is not listed, a [user contributed device template](User-created-templates) ([explanation](Templates)) may be available. If a [template](User-created-templates) is not available, follow the [procedure for configuring new devices](Configuration-Procedure-for-New-Devices).
 5. Configure [MQTT](MQTT): broker connection, choose a unique topic (e.g. "sonoff-kitchenlight")
 6. Test communication with the MQTT client of your choice
 7. Integrate with the Control interface or home automation solution of your choice
-8. Test your device for some time at the intended maximum intensity, check for [overheating](https://github.com/arendst/Sonoff-Tasmota/wiki/Thermal-considerations) and if necessary, apply some limits in your home automation solution.
\ No newline at end of file
+8. Test your device for some time at the intended maximum intensity, check for [overheating](Thermal-considerations) and if necessary, apply some limits in your home automation solution.
\ No newline at end of file