From 484d3a8119926de7550c483b1433313051ecb6f5 Mon Sep 17 00:00:00 2001 From: Wayne Manion Date: Thu, 25 Oct 2018 18:55:14 -0500 Subject: [PATCH] Created Xenon SM-SW102-2 two-relay light switch (markdown) --- Xenon-SM-SW102-2-two-relay-light-switch.md | 8 ++++++++ 1 file changed, 8 insertions(+) create mode 100644 Xenon-SM-SW102-2-two-relay-light-switch.md diff --git a/Xenon-SM-SW102-2-two-relay-light-switch.md b/Xenon-SM-SW102-2-two-relay-light-switch.md new file mode 100644 index 00000000..b56c489a --- /dev/null +++ b/Xenon-SM-SW102-2-two-relay-light-switch.md @@ -0,0 +1,8 @@ +Amazon Link: https://www.amazon.com/Tempered-Controlled-Separately-Standard-Compatible/dp/B0719Q5G5B/ref=sr_1_3?ie=UTF8&qid=1540511385&sr=8-3&keywords=xenon+light+switch&dpID=21PWx5MUrEL&preST=_SY300_QL70_&dpSrc=srch + +I didn't spot any headers, but device has a sub-board with an ESP-12 module on it. Solder right to the 3.3V, Ground, TX, RX, and GPIO pins and flash away. I set the device up as a generic device with the following assignments. + +GPIO 3 is button 2 +GPIO 4 is relay 2 +GPIO 12 is button 1 +GPIO 13 is relay 1 \ No newline at end of file