From 4ef82f30a468c7ff85db406c7b9d79e8151103e0 Mon Sep 17 00:00:00 2001 From: Jason2866 Date: Thu, 17 Oct 2019 10:33:13 +0200 Subject: [PATCH] Updated Wemos D1 Mini (markdown) --- Wemos-D1-Mini.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Wemos-D1-Mini.md b/Wemos-D1-Mini.md index bd682f70..3a2a09dc 100644 --- a/Wemos-D1-Mini.md +++ b/Wemos-D1-Mini.md @@ -9,7 +9,7 @@ Just connect Wemos D1 mini via USB. No action required to enter Flashmode! # Configure Tasmota for Wemos ## Generic Module -In the Configuration -> Configure Module page, select **Module Type: "18 Generic"** (releases before 5.12.0 this was called "Wemos D1 Mini"). After Saving the settings, the WEMOS reboots with the Generic configuration. The first time you switch to "18 Generic" you will NOT see all the options as seen in the picture below YET. You have to save "18 Generic" first and when you go there again after the reboot you get the long table where you can change all the pin's parameters. These steps are confirmed to also work with the Wemos D1 mini PRO v2.0.0. +In the Configuration -> Configure Module page, select **Module Type: "18 Generic"**. After Saving the settings, the WEMOS reboots with the Generic configuration. The first time you switch to "18 Generic" you will NOT see all the options as seen in the picture below YET. You have to save "18 Generic" first and when you go there again after the reboot you get the long table where you can change all the pin's parameters. These steps are confirmed to also work with the Wemos D1 mini PRO v2.0.0.