diff --git a/Adding-new-Module-types.md b/Adding-new-Module-types.md
index 5370a1aa..7ce73a8b 100644
--- a/Adding-new-Module-types.md
+++ b/Adding-new-Module-types.md
@@ -6,36 +6,15 @@ You can add an additional type by editing both the mytmplt and module_t arrays t
 
 The module definition is a list that contains the module name, followed by a definition of what each of the 17 GPIO pins on the ESP-8266 are defined to be. Each item in the list can be either 0 (unused), or a pin definition from the list below.
 
-As of 3/9/17 (4.0.2) these functions are:
+As of 3/9/17 (4.0.3) these functions are:
 
-* GPIO_KEY1 = GPIO_SENSOR_END,  // Button usually connected to GPIO0
-* GPIO_KEY2,
-* GPIO_KEY3,
-* GPIO_KEY4,
-* GPIO_REL1,           // Relays
-* GPIO_REL2,
-* GPIO_REL3,
-* GPIO_REL4,
-* GPIO_REL1_INV,
-* GPIO_REL2_INV,
-* GPIO_REL3_INV,
-* GPIO_REL4_INV,
-* GPIO_LED1,           // Leds
-* GPIO_LED2,
-* GPIO_LED3,
-* GPIO_LED4,
-* GPIO_LED1_INV,
-* GPIO_LED2_INV,
-* GPIO_LED3_INV,
-* GPIO_LED4_INV,
-* GPIO_PWM0,           // Cold
-* GPIO_PWM1,           // Warm
-* GPIO_PWM2,           // Red (swapped with Blue from original)
-* GPIO_PWM3,           // Green
-* GPIO_PWM4,           // Blue (swapped with Red from original)
-* GPIO_RXD,            // Serial interface
-* GPIO_TXD,            // Serial interface
-* GPIO_HLW_SEL,        // HLW8012 Sel output (Sonoff Pow)
-* GPIO_HLW_CF1,        // HLW8012 CF1 voltage / current (Sonoff Pow)
-* GPIO_HLW_CF,         // HLW8012 CF power (Sonoff Pow)
-* GPIO_USER,           // User configurable
+*   GPIO_PWM1,           // Warm
+*   GPIO_PWM2,           // Red (swapped with Blue from original)
+*   GPIO_PWM3,           // Green
+*   GPIO_PWM4,           // Blue (swapped with Red from original)
+*   GPIO_RXD,            // Serial interface
+*   GPIO_TXD,            // Serial interface
+*   GPIO_HLW_SEL,        // HLW8012 Sel output (Sonoff Pow)
+*   GPIO_HLW_CF1,        // HLW8012 CF1 voltage / current (Sonoff Pow)
+*   GPIO_HLW_CF,         // HLW8012 CF power (Sonoff Pow)
+*   GPIO_USER,           // User configurable
\ No newline at end of file