From 5872ef7513f22876b7c8604be9d572a44cc1687f Mon Sep 17 00:00:00 2001
From: Thomas Dietrich <Thomas.Dietrich@tu-ilmenau.de>
Date: Sat, 24 Jun 2017 01:26:57 +0200
Subject: [PATCH] Updated Sonoff 4CH (markdown)

---
 Sonoff-4CH.md | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Sonoff-4CH.md b/Sonoff-4CH.md
index ae468f0c..2d387dc8 100644
--- a/Sonoff-4CH.md
+++ b/Sonoff-4CH.md
@@ -13,7 +13,7 @@ As always, you need to access the serial interface. The **four serial pins** (3V
 *Attention:* The printed labels on the PCB for Rx and Tx are incorrectly swapped as can be seen on the image.
 
 <img title="Sonoff 4CH serial connection pins" src="https://github.com/arendst/arendst.github.io/blob/master/media/sonoff4ch_pins.jpg" width="48%" /> 
-<img title="Sonoff 4CH GPIO0" src="https://github.com/arendst/arendst.github.io/blob/master/media/sonoff4ch_gpio0.jpg" width="40%" align="right" />
+<img title="Sonoff 4CH GPIO0" src="https://github.com/arendst/arendst.github.io/blob/master/media/sonoff4ch_gpio0.jpg" width="42%" align="right" />
 
 The Sonoff 4CH features four hardware buttons of which one is already connected to GPIO0, which hence can be used to bring the module into [Programming Mode](https://github.com/arendst/Sonoff-Tasmota/wiki/Hardware-Preparation#bringing-the-module-in-flash-mode). The button is shown on the second picture.