diff --git a/YTF-IR-Bridge.md b/YTF-IR-Bridge.md
index 2cc98057..c91e0f37 100644
--- a/YTF-IR-Bridge.md
+++ b/YTF-IR-Bridge.md
@@ -1,38 +1,37 @@
 * YTF: https://www.amazon.com/gp/product/B07H46LJZK
 * Tuya: https://www.aliexpress.com/item/a/32951202513.html
 
-This device has now been added to the [dev release](https://github.com/arendst/Sonoff-Tasmota/commit/c5f68235700b4447198a9508b709c3e254676114#diff-ddfd77b547e11c4b59fa0d20fddd7f94R1679) as `Module 62`.
+Since release [6.4.1.8](https://github.com/arendst/Sonoff-Tasmota/commit/c5f68235700b4447198a9508b709c3e254676114#diff-ddfd77b547e11c4b59fa0d20fddd7f94R1679) this device has been added as `Module 62`.
 
-### Config
-```
-{ "YTF-Universal",
-    0,                  // GPIO0
-    0,                  // GPIO1
-    0,                  // GPIO2
-    0,                  // GPIO3
-    GPIO_LED1_INV,      // GPIO4 Blue Led
-    GPIO_IRRECV,        // GPIO5 IR Receiver
-    0,                  // GPIO6
-    0,                  // GPIO7
-    0,                  // GPIO8
-    0,                  // GPIO9
-    0,                  // GPIO10
-    0,                  // GPIO11
-    0,                  // GPIO12
-    GPIO_KEY1,          // GPIO13 Button
-    GPIO_IRSEND,        // GPIO14 IR Transmitter
-    0,                  // GPIO15
-    0,
-    0                   // ADC0 A0 Analog input
-  },
-```
-
-
-### Programming
+## Flashing
+This device is flashable with [Tuya-Convert](https://github.com/ct-Open-Source/tuya-convert) OTA flasher.
+### Serial flashing
 Like most devices, GPIO0 has to be held low during power up to get into flash mode. In the picture below, notice the red jumper wire between IO0 and GND. I soldered it in such a way I could hold it during power on, but release later (basically acts as a button), since it can not be held low if you want normal operation.
 
 ![img_1140](https://user-images.githubusercontent.com/1296162/50830738-8b069100-12fd-11e9-968a-ed93e396c614.JPG)
 ![img_2323](https://user-images.githubusercontent.com/1296162/50830734-8b069100-12fd-11e9-9c4d-130d17056257.JPG)
 ![img_8334](https://user-images.githubusercontent.com/1296162/50830737-8b069100-12fd-11e9-83b0-1d9b1ee42fb9.JPG)
 ![img_3255](https://user-images.githubusercontent.com/1296162/50830739-8b9f2780-12fd-11e9-83b3-bdaea3f50bb2.JPG)
-![img_3282](https://user-images.githubusercontent.com/1296162/50830740-8b9f2780-12fd-11e9-9a11-9572d9990e44.JPG)
\ No newline at end of file
+![img_3282](https://user-images.githubusercontent.com/1296162/50830740-8b9f2780-12fd-11e9-9a11-9572d9990e44.JPG)
+
+### Config
+```
+  { "YTF IR Bridge",   // https://www.aliexpress.com/item/Tuya-universal-Smart-IR-Hub-remote-control-Voice-Control-AC-TV-Work-With-Alexa-Google-Home/32951202513.html
+     GPIO_USER,        // GPIO00
+     GPIO_USER,        // GPIO01 Serial RXD
+     GPIO_USER,        // GPIO02
+     GPIO_USER,        // GPIO03 Serial TXD
+     GPIO_LED1_INV,    // GPIO04 Blue Led - Link status
+     GPIO_IRRECV,      // GPIO05 IR Receiver
+                       // GPIO06 (SD_CLK   Flash)
+                       // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
+                       // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
+     0,                // GPIO09 (SD_DATA2 Flash QIO or ESP8285)
+     0,                // GPIO10 (SD_DATA3 Flash QIO or ESP8285)
+                       // GPIO11 (SD_CMD   Flash)
+     0,                // GPIO12
+     GPIO_KEY1,        // GPIO13 Button
+     GPIO_IRSEND,      // GPIO14 IR Transmitter
+     0, 0, 0
+  }
+```