From 60642c21ee78e322eaaef682c3a1e498100a343b Mon Sep 17 00:00:00 2001 From: Justin Riddiough Date: Sun, 26 Aug 2018 17:04:30 -0700 Subject: [PATCH] This information should be highlighted in the documentation build path. For my first time flashing a Sonoff, I assumed I had not followed the directions properly and spent many hours trying on different switches, network configurations, etc. I first read the wiki page for the device, and proceeded to 'Getting Started' and thought it was a wifi problem for the longest time. --- Sonoff-Basic.md | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Sonoff-Basic.md b/Sonoff-Basic.md index 0d022b83..464814de 100644 --- a/Sonoff-Basic.md +++ b/Sonoff-Basic.md @@ -13,6 +13,8 @@ You need to access the serial interface. The **four serial pins** (3V3, Rx, Tx, For flashing the sonoff basic V1.1, please hold the button while connecting the Plus Pole. The LED remains off until the flashing process is done and the board is rebooted. +The Sonoff Basic switch doesn't have memory to support all of the default services defined in user_config.h out of the box. If your switch is powering up but is showing a solid-blink-reset pattern see [this FAQ entry for advice.](https://github.com/arendst/Sonoff-Tasmota/wiki/Troubleshooting#running-out-of-memory) + ## GPIO Locations ![gpios](https://cdn.instructables.com/F8Q/0U89/J1WEQK7J/F8Q0U89J1WEQK7J.MEDIUM.jpg)