From 60ebe65bd739e71631e16693c4bc9091db5b3696 Mon Sep 17 00:00:00 2001 From: arendst Date: Wed, 8 Feb 2017 10:55:37 +0100 Subject: [PATCH] updates --- Sensor-Configuration.md | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-) diff --git a/Sensor-Configuration.md b/Sensor-Configuration.md index 50306750..e5b3d440 100644 --- a/Sensor-Configuration.md +++ b/Sensor-Configuration.md @@ -7,20 +7,20 @@ The software supports: - [dual wire or I2C sensors](#i2c-sensor) - [single wire devices](#devices) -Only one sensor type per module is allowed so you can only connect one DS18B20 (string) to the module. +Only one sensor per group is allowed. ## Single wire sensor The following single wire sensors are supported: -- DHT11 Temperature and Humidity - ``DHT11 (1)`` -- DHT21 Temperature and Humidity - ``AM2301 (2)`` -- AM2301 Temperature and Humidity - ``AM2301 (2)`` -- DHT22 Temperature and Humidity - ``DHT22 (3)`` -- AM2302 Temperature and Humidity - ``DHT22 (3)`` -- AM2321 Temperature and Humidity - ``DHT22 (3)`` -- DS18B20 Temperature - ``DS18x20 (4)``
Enable option ``USE_DS18x20`` in ``user_config.h`` for multiple sensors using OneWire library -- DS18S20 Temperature - ``DS18x20 (4)``
Enable option ``USE_DS18x20`` in ``user_config.h`` using OneWire library -- External switch - ``Switch (8)``
Use ``SwitchMode`` to tune it's behaviour -- HC-SR501 PIR Motion Detection - ``Switch (8)``
Use ``SwitchMode`` to tune it's behaviour +- DHT11 Temperature and Humidity - ``DHT11 (1)`` in group 1 +- DHT21 Temperature and Humidity - ``AM2301 (2)`` in group 1 +- AM2301 Temperature and Humidity - ``AM2301 (2)`` in group 1 +- DHT22 Temperature and Humidity - ``DHT22 (3)`` in group 1 +- AM2302 Temperature and Humidity - ``DHT22 (3)`` in group 1 +- AM2321 Temperature and Humidity - ``DHT22 (3)`` in group 1 +- DS18B20 Temperature - ``DS18x20 (4)`` in group 2
Enable option ``USE_DS18x20`` in ``user_config.h`` for multiple sensors using OneWire library +- DS18S20 Temperature - ``DS18x20 (4)`` in group 2
Enable option ``USE_DS18x20`` in ``user_config.h`` using OneWire library +- External switch - ``Switch (8)`` in group 3
Use ``SwitchMode`` to tune it's behaviour +- HC-SR501 PIR Motion Detection - ``Switch (8)`` in group 3
Use ``SwitchMode`` to tune it's behaviour You can add a sensor using the following (MQTT) commands: @@ -33,7 +33,7 @@ You can add a sensor using the following (MQTT) commands: For some sensors to show up a power cycle of Sonoff is needed to reset the devices just configured. ## I2C sensor -The following I2C sensors are supported using ``I2C SCL (5)`` and ``I2C SDA (6)``: +The following I2C sensors are supported using ``I2C SCL (5)`` and ``I2C SDA (6)`` in group 4: - BH1750 Ambient Light Intensity - BMP180 Pressure and Temperature - BMP280 Pressure and Temperature @@ -53,7 +53,7 @@ The software will autodetect the connected I2C devices. For some sensors to show ## Device The following additional device(s) are supported: -- WS2812 led string - ``WS2812 (7)``
Using NeoPixelBus library and external 5V power supply +- WS2812 led string - ``WS2812 (7)`` in group 5
Using NeoPixelBus library and external 5V power supply You can add a device using the following (MQTT) commands: