From 6bf7d72121259928d502d72607daa5f558bb4d42 Mon Sep 17 00:00:00 2001 From: afalzon <46345304+afalzon@users.noreply.github.com> Date: Sun, 13 Jan 2019 08:21:42 +1100 Subject: [PATCH] Updated Mirabella Genio Smart Plug (markdown) --- Mirabella-Genio-Smart-Plug.md | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/Mirabella-Genio-Smart-Plug.md b/Mirabella-Genio-Smart-Plug.md index 4d2ab45c..bf81181c 100644 --- a/Mirabella-Genio-Smart-Plug.md +++ b/Mirabella-Genio-Smart-Plug.md @@ -2,17 +2,17 @@ This is a simple smart plug with the addition of a USB port, as far as I can see the USB port is 'always on' and is not access this from the ESP module. Opening up the device was easy, 2 screws then a small amount of gentle prying exposed the components, 2 more screws had it fully deconstructed. -The ESP module is mounted on a pcb with all of the required pins exposed, a quick google image search gave me this information: - +The ESP module is mounted on a pcb with all of the required pins exposed. + +![Photo of plug](https://i.ibb.co/FDk2TMz/genio-plug-connections-SM.jpg) ![ESP8266 PINOUT](https://i.ibb.co/YRQstXr/ESP-PIN-OUT.png) -I was able to flash by connecting GPIO0 to GND while connecting my Serial Adaptor and plashing as per any other ESP device -Use this from the console of the device to configure all your own settings: +I was able to flash by connecting GPIO0 to GND while connecting my Serial Adaptor and flashing as per any other ESP device +Use the string below from the console of the device to configure everything (replace required data with your own SSID, Password, MQTT Settings etc.): `Backlog SSID1 YOUR_SSID_NAME; Password1 YOUR_WIFI_PASSWORD; MqttHost MQTT_INTERNAL_IP_ADDRESS; MqttUser MQTT_USER_NAME; MqttPassword MQTT_PASSWORD; GPIO2 56; GPIO12 21; GPIO13 17;topic genio1; FriendlyName Genio1` [my prefered flashing method](https://www.youtube.com/watch?v=UDnNI5wkNNY) Once flashed, the config should look like: -![config settings](https://i.ibb.co/khNDTvV/settings.png) -hope this helps anyone looking at these products! \ No newline at end of file +![config settings](https://i.ibb.co/khNDTvV/settings.png)