From 70c4dddc3267d5f0cb8fb53aec698a3249e265ef Mon Sep 17 00:00:00 2001 From: Dave Date: Wed, 24 Oct 2018 22:04:39 -0500 Subject: [PATCH] Updated KS 602S Switch (markdown) --- KS-602S-Switch.md | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/KS-602S-Switch.md b/KS-602S-Switch.md index e074c7d3..3bbd207a 100644 --- a/KS-602S-Switch.md +++ b/KS-602S-Switch.md @@ -5,9 +5,7 @@ These Wi-Fi Smart Light Switches are essentually a sonoff basic in a decora wall Unboxing: ![](https://github.com/lvgeek/KS-602S/blob/master/images/IMG_0282.jpg) - ![](https://github.com/lvgeek/KS-602S/blob/master/images/IMG_0285.jpg) - ![](https://github.com/lvgeek/KS-602S/blob/master/images/IMG_0286.jpg) ![](https://github.com/lvgeek/KS-602S/blob/master/images/IMG_0287.jpg) @@ -22,6 +20,7 @@ Of course Ground and 3.3vdc to power unit during flash. I did not solder the header to the board I was able to hold pressure while it flashed + ![](https://github.com/lvgeek/KS-602S/blob/master/images/IMG_0289.jpg) Hold the button and plug in programmer. @@ -29,4 +28,5 @@ Hold the button and plug in programmer. I flashed with Arduino IDE and Tasmota 6.2.1. Device works perfectly as a Sonoff Basic + ![](https://github.com/lvgeek/KS-602S/blob/master/images/IMG_0298.jpg)