diff --git a/Button-usage.md b/Button-usage.md
index f0c4ce2a..54041185 100644
--- a/Button-usage.md
+++ b/Button-usage.md
@@ -1,19 +1,27 @@
-The main button on a Sonoff-Tasmota flashed module provides the following functionalities:
+If your device has one, the built in hardware push button offers a lot of functionality. Keep in mind that if you have changed [ButtonTopic](commands#buttontopic), [SetOption2](commands#setoption2), [SetOption11](commands#setoption11) or [SetOption13](commands#setoption13) some functionality will be changed or removed.
 
-- **1 short press:** Toggles the relay either directly or by sending a MQTT message like ```cmnd/sonoff/POWER1 ON```. This will blink the LED twice and sends a MQTT status message like ```stat/sonoff/POWER1 ON```. If ```cmnd/sonoff/ButtonRetain on``` has been used the MQTT message will also contain the MQTT retain flag.
+### 1 short press
+Toggles the relay, either directly or by sending a MQTT message like ```cmnd/sonoff/POWER1 ON```. This will blink the LED twice and sends a MQTT status message like ```stat/sonoff/POWER1 ON```. If ```cmnd/sonoff/ButtonRetain on``` has been used the MQTT message will also contain the MQTT retain flag.
 
-- **2 short presses:** Toggles the relay 2 if available on the device. This will blink the LED twice and sends a MQTT status message like ```stat/sonoff/POWER2 on```.
+### 2 short presses
+Toggles the second relay (if available on the device). This will blink the LED twice and sends a MQTT status message like ```stat/sonoff/POWER2 on```.
 
-- **3 short presses:** Start Wi-Fi smartconfig allowing for SSID and Password configuration using an Android mobile phone with the [ESP8266 SmartConfig](https://play.google.com/store/apps/details?id=com.cmmakerclub.iot.esptouch) app. The LED will blink during the config period. A single button press during this period will abort and restart sonoff. 
+### 3 short presses
+Start Wi-Fi smart config allowing for SSID and password configuration using an Android mobile phone with the [ESP8266 SmartConfig](https://play.google.com/store/apps/details?id=com.cmmakerclub.iot.esptouch) app. The LED will blink during the config period. A single button press during this period will abort and restart the device. 
 
-- **4 short presses:** Start Wi-Fi manager providing an Access Point with IP address 192.168.4.1 and a web server allowing the configuration of Wi-Fi. The LED will blink during the config period. A single button press during this period will abort and restart sonoff.
+### 4 short presses
+Start Wi-Fi manager providing an Access Point with IP address 192.168.4.1 and a web server allowing the configuration of Wi-Fi. The LED will blink during the config period. A single button press during this period will abort and restart the device.
 
-- **5 short presses:** Start Wi-Fi Protected Setup (WPS) allowing for SSID and Password configuration using the router's WPS button or webpage. The LED will blink during the config period. A single button press during this period will abort and restart sonoff.
+### 5 short presses
+Start Wi-Fi Protected Setup (WPS) allowing for SSID and password configuration using the router's WPS button or web page. The LED will blink during the config period. A single button press during this period will abort and restart the device.
 
-- **6 short presses:** Will restart the module
+### 6 short presses
+Restart the device.
 
-- **7 short presses:** Start OTA download of firmware. The green LED is lit during the update
+### 7 short presses
+Start OTA download of firmware using [OtaUrl](commands#otaurl). The green LED is lit during the update.
 
-- **Pressing the button for over 40 seconds:** Reset settings to defaults as defined in ```user_config.h``` and restarts the device
+### Pressing the button for over 40 seconds
+Reset settings to firmware defaults as defined in ```my_user_config.h``` and ```user_config_override.h``` and restart the device.
 
 The button is usually connected to `GPIO0` *(NodeMCU pin D3)*